VIA Hyperion 4 in 1 Drivers 4.45

how is VIA Hyperion 4 in 1 Drivershttp://www.viaarena.com/?PageID=211
can use At KT333+VT8235 or no

I was able to set my fsb to 138 with no problem with the 4.43 but when i installed the 4.45 windows reset when running 3dmarks2001se. set fsb back to 133 and no problems. Not sure if it was just a one time deal but dont want to chance setting the fsb back up. +/- 8000 is good enough for me. for now anyway
kt4ultra
xp2000+
256mebg pc2700
geforce3 (41.09)
antec 300w smartpower
40gig wd 7200rpm hd

Similar Messages

VIA Hyperion 4 in 1 drivers

I have recently tried to install the VIA 4 in 1 drivers 4.1.53 but, each time I try and install them, I get the message that the system file "isapnp" cannot be found ! I manually browsed and found the file and the Hyperion 4.1.53 install completed.
However, after re-booting I went into device manager, system devices and checked the VIA PCI, CPU to AGP and Host Bridge driver details and they are all dated the year 2002 or 2003.
Surely if the new Hyperion drivers had been installed these drivers would be dated 2004 ?
Any helpful comments would be much appreciated.

hey, i found this. Might help, might not.
VIA Hyperion 4in1 4.53 and Microsoft Windows XP Service Pack 2 users - please note:
AGP driver recommendation:
To deliver a quality user experience, a universal standard for AGP drivers, UAGP35, is being adopted by all chipset vendors
with AGP 3.5-capable hardware. VIA have worked with Microsoft on this issue for a long time and continue to do so. There are
many VIA AGP3.0/3.5 devices which are supported in SP2. VIA's AGP driver contained in the latest Hyperion 4in1 drivers will
work properly with Windows SP2, however, the default Microsoft driver is recommended. Please follow the advice below,
depending on whether you are installing WinXP and SP2 on a clean system or installing SP2 on top of WinXP SP1.
Clean system install:
(1) Install Windows XP
(2) Install SP2
(3) Install VIA Hyperion 4in1 4.53 driver but untick the AGP driver so that it is not installed.
System Upgrade:
If your system already has Windows XPSP1 installed and the VIA Hyperion 4in1 4.53 driver then:
1) Install SP2
2) Install VIA Hyperion 4in1 4.53 driver
3) Uninstall the VIA AGP driver. Go to Control Panel > System > Hardware > Device Manager > VIA CPU to AGP Controller > Driver > Uninstall.
4) Restart the PC. SP2 will automatically install the UAGP (Microsoft default driver).
By removing the VIA AGP driver you will then be using the recommended Microsoft default AGP driver from SP2.
More information:
Microsoft has initiated a standardized way of programming and manipulating the AGP driver. In summary, Microsoft are concerned
that vendor-specific drivers may define different page table entry (PTE) formats for GART, choose different register layouts
for their AGP target (motherboard) devices and invalid GART entries could cause AGP-related system instability, such as memory
corruption. Detailed information can be found here. VIA continuously works with Microsoft to provide the best possible experience
for users of both products.
-Mick

VIA Hyperion 4in1 v4.48

Is anyone else havin problems with the new *hyperion* 4 in 1 drivers?
Since VIA changed the name, back at v4.44 or 4.45, i have been unable to update my drivers.
Everytime i do, it starts out ok, gets right up to the point where its about to ask me to restart my pc , and the dam thing locks up.
When i restart it, it goes thru the usual start up routine, but wont boot fully, and just leaves me with a black screen, and a lil flashing cursor in the top left corner of my screen. Because of this, i am stuck at v4.43 (not that they cause any trouble, i just like to keep my drivers updated regularly)
I then have to take my case apart so i can get to the CMOS jumper, and reset it just to get the pc to boot normally, then reinstall the older 4.43 drivers to insure it has a full set.
system spec is:
MSI kt3 Ultra 2C
XP2000+ with Globalwin CAK4-88T hsf arrray with arctic silver thermal paste
MSI Gf4Ti4200 128mb 4xAGP
512mb DDR333mhz ram
SB live 5.1 Sound Card
20gb HDD
2 intake fans
1 extraction fan
Win ME

Remember an old saying: "If it ain't broke, don't fix it"
Aardvark is right, for Win98/ME users, it is better off to stay with the older 4 in 1 Driver. You'll get better stability.
Probably it's time to move on to Win2k or even better yet WinXP.

Via Hyperion chipset drivers for K&t266 Pro2 MS 6380

hi all
Having recently re installed XP to new hard drive thought I should update the VIA chipset drivers so have installed 4in1 Hyperion 451v.
Am having some lock up problems transfering files from 1 hard drive to another on the same IDE channel.
Power supply problem identified and new Antec on the way.
Looking for some opions guidance around standard XP drivers vs Via and as this is quite old board should I be using retro Via drivers for stability.
Views, thoughts experience appreciated.

Some kt266 chipsets requires the VIA latency patch.
Fixes file transfer issues, corruption and stability issues.
Improves PCI bus transfer rates and crackling sound issues.
you might want to look into this.

"Games Crash" Via Hyperion 4in1 drivers_Windows X64

I have recently noticed that in ATI's Catalyst settings, it does not recognize my AGP card or settings, but games seem to work fine. I downloaded and installed the hyperon 4in1 package which includes via's AGP driver V4.50D. Now catalyst recognizes my AGP card and settings, but games e.g. "call of duty 2" crash hard at menu screen. video is gone forcing a system reboot. I am running directX 9c. Is there a need for via's AGP driver? what is its purpose ?
Thanks

I'm not sure I understand your question. If you are refering to system info. Windows x64 does list an AGP controller. Its just that the ATI software (catalyst) does not seem to recognize this. AGP settings are greyed out w/in the ATI panel, and I'm not able to adjust the AGP speed, and fast write/read etc. w/in the catalyst software. I'll have to do some research on ATI's forum. Like I had mentioned above, games run fine w/o the VIA 64 bit AGP driver installed. I have no Idea why VIA released a 64bit AGP driver. I'm assuming its something to do with the AGP hardware on the mobo vs. the actual video card? All I know is when I installed the VIA AGP driver for X64 It really screwed up my system for gaming? Good thing I had a system back up !
This is part of what my system info shows w/o the Via driver...is this normal ?
Memory address 0xE8000000-0xF7FFFFFF VIA K8 CPU to AGP controller
Memory address 0xE8000000-0xF7FFFFFF Radeon 9600 Series
IRQ16 Radeon 9600 Series
then further down...
I/O Port 0x000003B0-0x000003BB VIA K8 CPU to AGP controller
Then w/in the device mgr/ display adapters it lists my video card at PCI bus 1, device 0, function 0
Sounds screwy to me ????
Any understanding of this would be appreciated.
Thanks

VIA Hyperion 4 in 1 455vp1

http://www.maksys.biz/comcentral/showindex.php?p=355#post355

Yep, I installed them yesterday. The splash screen at the start says its a service pack!!
I dont know of any performance increase or the like,I'm just one of those blokes
who likes to install new drivers!

Not Receiving Email Notifications via Hyperion Workflow Process

Hi All,
Configuring SMTP for workflow process in Hyperion planning.
I did the following steps for the above process.
1--> I checked whether SMTP server is running or not using Telnet command in the machine where the application is running-->*[Its working fine]*
2-->Then I logged in to planning application with admin credentials and set the Email server details as follows
2.a) *[Planning-->Administration-->Application-->Settings-->I entered the Email server details]*
2.b) *[Planning-->File-->Preferences-->Planning-->I mentioned the Email address for administrator]*
3--> I created several users using shared services console and I set the security Access type as Descendents Inclusive for each and every dimensions.
4--> I set the Email address for every users which are created in the above step *[Planning-->File-->Preferences-->Planning]*
5--> I created a Planning unit Hierarchy.
6-->I logged as a Planner and I entered the budget in the Data form .
7-->I promoted this budget to the Higher official for verification process.
8-->But I didn't get the status mail for the above process.
Kindly guide me whether I am following the right procedure to config SMTP in my application.
How to get the status of the notification mail through relational tables.
Kindly mention the location of log files regarding this issue.
Please guide me to overcome this issue.
Thanks and regards
Sai

Hi John,
Thanks for your reply. I couldn't get you from the below quote
Does you SMTP server accept anonymous connections?
Anonymous in the sense that you mean like Unauthenticated connection. Yes my mail server is unauthenticated server, hence it doesn't require any username and password.
Regards,
Sai

Pci Compatibilit Mode

I getting a problem with a FX-5200-T128,
The problem is that im currently im AGP (PCI MODE), and because of it im getting a bad fps on my games..., my current motherboard is AV8X-X, with a fx5200 agp8x enabled, but im still with PCI MODE, already updated the driver and directx, what i can do to solve it ?

You didn´t mention it but install mobo drivers first (in this case VIA Hyperion 4in1), then video drivers and try RivaTuner, which allows you to select AGP mode and to force it to remain enabled.
Luck

Do you really need the 4-in-1 drivers

Do you really need to install the 4-in-1 drivers if you are using windows 2000pro? What I notice is that windows 2000 pro install all the drivers but the agp drivers. Ihave the K7T TURBO 2 MOTHERBOARD.

Do you have the abilty to backup or image your OS? If so bench mark your system using Sandra, PCMark and 3DMark, install the latest VIA Hyperion drivers and bench mark again. I am confident that you will see an improvement. The VIA drivers are written specifically for the chipset, like using Detonator drivers on NVidia cards. If not rebuild you image from your back up.

New VIA driver pack

VIA Hyperion 4in1 v4.46, released 10 March 2003 is available... almost, on VIA's web site. Both http and FTP links have shown to be dead or alive this morning, not to mention slowwwwwwwwwwwwwwwwwwwwww. I have no idea what is included in the update, as that link was DOA all morning.
Matt

VIA Hyperion 4in1 v4.46 (VIA)
Kategori: Chipset Drivere
Tilføjet: 10-03-2003 14:25
Størrelse: 1.32 MB
Antal downloads: 221
VIA Hyperion drivers are suitable for any VIA chipset. If you are looking for VIA 4in1 drivers, these are the drivers you are looking for. The "Hyperion" name was added to the 4in1 driver set name in December 2002. This is the second release with the Hyperion name.
VIA Hyperion 4 in 1 driver includes four system drivers to improve the performance and
maintain the stability of systems using VIA chipsets. These four drivers are:
VIA Registry (INF) Driver, VIA AGP VxD driver, VIA ATAPI Vendor Support Driver
and VIA PCI IRQ Miniport Driver. For Windows NT users, VIA IDE Bus Mastering
driver is the only driver to be installed to your system
VIA Registry (INF) Driver is to be installed under Windows. The driver will
enable VIA Power Management Controller.
VIA AGP VxD Driver is to be installed if you are using an AGP VGA card.
VIAGART.VXD will provide service routines to your VGA driver and interface
directly to hardware, providing fast graphical access.
VIA ATAPI Vendor Support Driver enhances compatibility with IDE devices.
VIA PCI IRQ Miniport Driver installs under Windows 98 only. It will
improve the PCI IRQ routing sequence.
The driver package will automatically detect your operating system and provide the
necessary options by default. If you choose Normal install, the installation program
will display those options and you may untick any options to either not install them
or uninstall them. If you choose Quick install the driver options will not be
displayed they will just be installed. Therefore if you are running the program to
uninstall any drivers, just must chose the Normal install option.
Change Log:
Update VIA AGP driver to v4.41a
Fixed overwrite issue
Fixed the K8 CPU cache Flush syntax error in Viagart.sys (miniport driver).
Note: Please uninstall AGP V4.40 first if you want to install previous AGP version

[VIA] Which VIA 4-in-1's are best for a KT333

I just got a MSI 6380E (KT3 Ultra) with the VIA KT333 chipset. I was looking at VIA's site, and wasn't sure which would be the best drivers for my system. Since I don't have an SATA controller onboard, I don't want the HyperionPro package. So that leaves the retro and Hyperion. Which one would be best for my system?
Thanks,
James

from Viaarena.com:
VIA Hyperion 4in1 drivers are suitable for ANY VIA chipset - but they are particularly recommended for KT4## series, P4X4## series and newer, for example:
K7 chipsets: KT400, KT400A, KT600, KT880, KM400, KN400
K8 chipsets: K8T800, K8T800Pro, K8M800, K8T890, K8T890Pro
P4 chipsets: P4X400, P4X400A, PT800, PT880, PM800, PM880, PT880Pro, PT894
VIA Hyperion 4in1 drivers are compatible with any VIA chipset. Performance, however, is optimized for the more recent and the latest chipsets. Therefore some users of slightly older or legacy chipsets report that using the older 4.43 drivers they experience a more responsive system.
The driver package below is recommended for use with the following chipsets: MVP#, Apollo Pro## series, KT1##, KN1##, KM1##, KT2##, KN2##, KM2##, P4X2##, P4X3##, P4M2##
funny they don't mention the KT333, but i think 4.43 will be fine for you

Is DB2/400 support for Hyperion Intelligence?

Has anyone tested connecting DB2/400 via Hyperion Intelliigence?
Some of my sales representatives are in a rush.
Regards.

It should work fine. You would just need to install the IBM iSeries Access ODBC drivers on the machine where you are using Hyperion Intelligence.

Via KT6V 8x

Hi all ..
I have a via kt6v with 8x agp card support.
I have made the bios update with the MSI LiveUpdate..
after the bios update, in the list apears only 1x, 2x and 4x .. (8x no) ..
I have a GeForce 3 TI 200 what support 4x.
In the bios, apears only what the agp card support ? or is a problem whit the MainBoard ?
Thanks

Quote
8x will never appear unless you stick in an 8x vga card
And also have the latest chipset(Via Hyperion) drivers installed.

Lock Up In Halo - Via Chip Said To Be Problem... Work Around?

I'm experiencing system stalls... approximately 20 seconds while playing HALO. The game will stall then pick right back up.
Microsoft blaims the VIA chipset for this problem.
I'm hoping their is a work around.
I have the lastest drivers from VIA and Nvidia as well as the latest firmware for the MOBO. I can't seem to locate the video card BIOS on the website... and I know live update does it but I hate live update.
SYSTEM:
Windows 2000 Pro SP 4 (no updates listed on windowsupdate)
MSI KT3-Ultra-ARU (MS-6380E v. 1)
-- BIOS Ver 5.7 (stalls with all BIOS version and yes I tried them all)
-- VIA Hyperion Ver 14.51
MSI Nvidia Geforce3 Ti200 Pro TD-128 (MS-8851)
-- Detonator Ver 53.03
-- BIOS version unknown (I did update the firmware once)
Athlon XP 1700+
768MB DDR 266 (Micron)
80GB Western Digital SE
40GB Maxtor ATA 100 7200RPM 2MB
SONY 500A DVD+-RW
LG CD-ROM
Thanks,
Mike

Typical microsoft, there are thousands of via-boards sold but ms only says 'not our fault'. Great support indeed...
You may try >this but I really don't know if it solves your prob.
Virus scanners or firewall active?

Is there a workaround on installation of drivers (Windows support drivers)?

I get a crash everytime I try to install these drivers on my Bootcamp partition.
Windows does a crash dump and restarts computer. I do not know exactly at what point during the installation of the Windows Support drivers this happens.
Other comments: I am using at the moment generic PC mouse and keyboard connected via USB as my bluetooth drivers have not installed properly (it seems).
Thanks for any help!

Forgot to mention, I installed Windows 7 Professional with service pack 1 debugged and checked build 64-bit.

VIA Hyperion 4 in 1 Drivers 4.45

Similar Messages

Maybe you are looking for