[VIA] Problems with MSI KT6 Delta

MSI KT6 Delta
AMD XP 2000+
256 MB DDR 400
GeForce FX5200 128 MB DDR
I installed WinXP+SP1 and VIA4in1 v4.55 with NVIDIA 66.93 drivers. The screen fades out and in less than a second the picture shows up again.
Note: What should appear in device manager in section "System devices" after installing VIA4in1 v4.55?
I tried: changing video card, RAM memory, installing WinXP+SP2 (worse results!)
Thanks in advance

The system reports no errors nor conflicts in Device Manager window. This problem appeared when I did an upgrade from WinXP SP1 to SP2. I use Fedora Core on the same computer with NVIDIA drivers installed and there were no problems. I tried to change the monitor but it was the same. I think I managed to solve the problem by installing WinXP SP1 and an older NVIDIA driver (version 4.5.2.3) and VIA 4in1 pack 4.55. Everything runs smooth for now.

Similar Messages

Sound problems with the kt6 delta

Hi all,
I capture a lot of streaming audio from the web. I use cool edit pro to record the audio and then save it as a mp3 file. I have noticed recently that my sound seems to be dropping from time to time. For a while the sound level is great and then drops down very low before coming back up again.
Has anyone had this sort of problem?
Thanks,
David

It does get quite warm on mine.
You'd think with all of the integrated stuff in it the thing should be cooking.
I've seen on a Soyo KT600 Dragon board it had heatsinks galore a tiny guy on the nic chip, and also one on the southbridge along with the mosfets, and a few other places.

Problems with MSI K7N2 DELTA ILSR

I set my bios to high performance defaults and now when i turn it on the diagnosis LED's say that the processor, then the RAM are damaged, but this isnt the case as i have tested them in a different machine and they are ok. I have tried clearing the CMOS using the jumpers but nothing happens. I have read on here that the way to solve this problem is to set the CPU FSB jumper to 100mhz... could somebody please tell me if there are any other usjestions about how to solve this please...
Nick

Quote
Originally posted by Nerdyjim
cheers.. is it worth going for a 3200+ Athlon, or should i save the money and go for a 3000+ Athlon??
Get something like a 2700+, I've got one, if I OC the FSB by 5, I achieve the performance of a 3200+, I can go higher, but I don't want to until I get a volcano 12, soon.

MSI KT6-Delta FIS2R Broadcom doen't accept any driver

I've problem with MSI KT6-Delta FIS2R networkcard Broadcom doen't accept any driver, anyone help me.

I've got the same problem with the 4401 onboard lan of my Kt6 delta lsr.
I ran the dos-diag tool from the broadcom website and it reported an error
in the 3. test.
It reported an invalid mac-address (ff-ff-ff-ff-ff-ff) as well.
I can't get it to work in linux either.
Either the board is damaged or the bios is buggy (v3.4).
I would really appreciate if someone could tell me how to fix this.
Are there different verisons of the kt6?
I've got version 2.0.

MSI KT6 Delta( Via KT600) works with mobiles???

Hello, just bought today a used cpu, it's a Athlon XP mobile 2000+ for my MSI KT6 DELTA...
It just won't boot... i turns on and off after a second or less...
Is this an unsupported cpu??
I've searched on teh msi page for cpu support, and I have my doubts...
Here's what's qritten on the CPU Core: AXMH2000FQQ3C
For waht i understand it's a Thoroughbred/barton based cpu, 45W, works at 1667MHz, with FSB Autodetect, deafault V, 1.45, max temp 100º C, 256kb cache, 266 MHz bus...
It's said on the main page of this board, that it's supports 400MHz FSB's...
HELP PLEASE!!!

Quote
HELLO??? IT SIMPLY DOESN'T RUNS!!!
you expecting help adopting that tone?
lose the sarcasm and the caps lock and you more likely to get advice
For what it is worth you are not making yourself clear.
For example:- Quote
It just won't boot... i turns on and off after a second or less...
Quote
and to turn it back on with the cpu, i have to clear cmos data...
Let's assume cpu is correctly greased and seated; when you power on get no response (psu fan, cpu fan, case fan, beeps?) unless you clear cmos and then once you do that you get 1 sec of activity before system powers down?
have you put old cpu back in and still works?
i guess you will know more when you test new cpu elsewhere

MSI KT6 Delta-L sound problems

Hi, I have an annoying problem. My sound gets disorted and after one or two seconds I get a Blue Screen..
This only seems to happend with Operation Flashpoint Resistance and Lock On Air Combat (both uses a lot of memory). Computer is rock stabile unless this.
I have tried both Win2k/XP and flashing my BIOS to the most rescent one, as well as the drivers.. I have also tried without the PCI-cards, and disabled some features at the motherboard, but with no help.
But when I used Via AC97 drivers instead of C-Media, it crash no more (aswell as no sound drivers at all), but I have no surround sound (I suppose that driver don't support my sound chip fully)...
Ok, know to my specs,
AMD XP 2500+ Barton 512 kb cache
MSI KT6 Delta-L
2 x 512 MB Twinmos Twister CAS2 400 MHz
Powercolor ATI Radeon 9800 Pro 128 MB
Q-Tec 450W Gold
Avermedia DVB-T Digital-TV-card
Promise UltraTX2-100
And some harddrives

:biggthumbsup:First off see if your ram is compatible Here then what is your power supply AMP'S like?
as well we can try this Page to get a stable start
see how that goes,
post back

MSI KT6 Delta LSR SATA to PATA High CPU Usage Problem

Well recently I've switch to my one of my other motherboards on my network to a MSI KT6 Delta LSR, it was working fine after a reformat, but I notice a few problems and that is 100% cpu usage for SATA to PATA, and vice versa, which seems really crazy. Then my network card performance is ISDN speed sluggish, and I tested my line to be working 100% with another mobo. But when I put another NIC on the same mobo it suffers the same speed problems.
Any suggestions? The rig is specs:
Barton 2500+
Antec QuietPower 350W
200GB Seagate SATA HDD
40GB Seagate PATA HDD
ATI Radeon 7500 AIW
Audigy 2 Value
Realtek 8139 NIC
MSI KT6 Delta LSR Mobo
2x512 MB PC 2700 RAM
Pioneer 107D DVD Writer
LG 16X DVD-ROM
56K Modem (A-open)

Shouldn't say what I don't know about SATA, but since I found below, I need ask if VIA 4in1 drivers are installed, preferably while in SafeMode I say:
http://www.google.se/search?q=cache:X6ewgPiIHYcJ:www.qdi.nl/cgi-bin/bbs/YaBB.pl%3Fboard%3DP4I865%3Baction%3Ddisplay%3Bnum%3D1074174096+sata+to+pata+cpu+usage&hl=sv
I recently installed 160g Seagate barracuda 7200.7 drive on SATA port. (I enabled the Bios using Auto) I have a P4I865pea-6al mother board, with two PATA drives . When copying files between the PATA drives on ide ports, to or from, the SATA drive, I notice the CPU usage goes up to 100%, but when copying files from one ide drive (the PATA drives) to another the CPU usage is very low.
Is there a bios setting that will allow me to copy files from the SATA drive to the Pata drives using a small amount of CPU power, found when just copying between the Primary and Secondary IDE drives? I am using Adobe premiere pro, which uses a lot of CPU power, and the high CPU usage of the SATA drive crashes this program? Any help would be appreciated
Re: CPU usage with SATA drive?
« Reply #1 on: Oct 30th, 2004, 7:17pm » Quote Modify
have you installed the newest chipset- and ide drivers ?

I have a problem MSI kt6 delta help!!!!!

Hi
I have a problem with my MOBO MSI Kt6 Delta, The problem is i cant use Windows XP with my MOBO.
My hardwares are: AMD XP2600 333mhz, DDR 512MB PC2700,Geforce4 128MB ti4400 (msi), CDRW TDK VeloCD 24x10x40, HD SEGATE 120 GB SATA.
When i installed Windows XP it couldnt start great (error with Video) for that reason i installed the Geforce drivers via Safe Mode. then i reset and work great only for 15 MIN (it shows blue screem error with some problem with video card) and for that reason i installed windows 98 and works great (we hate win98) lol. Pls help me

Try with another video card, if the problem is solutioned, review your video card. In The BIOS activate the Fast Write for AGP. I have a Geforce 4 MX 440 8x 64 MB and works very very fine.

MSI KT6 Delta PROBLEM

First, my hardware :
Everything running @ default speed & settings.
AMD XP 2700+ (running @ about 47C idle and about 55C in work)
MSI KT6 Delta (v2) with latest bios
512mb DDR (333) CL2.5 Elixir
Seagate S-ATA ST380013 (80gb), with WinXP Pro (SP1) installed
Samsung SP1203N (120gb), as primary master on IDE1
Samsung 52/32/52x CD-RW, as secondary master on IDE2
Connect3D Radeon 9600 128mb
PSU Antec TruePower 380w:
+5V 35A
-5V 0.5A
+12V 18A
-12V 1.0A
+3.3V 28.0A
+5VSB 2.0A
I keep getting some strange BSOD. No matter what I do with the machine. Windows locks up completely and after about 1min, that BSOD comes and machine boots.
( http://www.saniainen.com/bs.jpg )
In normal usage, it comes about 1-3 times/day.
Mostly it comes when I copy some files from disk to other.
But it comes everytime when I try to decompress big (over 400mb) ZIP-files.
Everything did work with my old board, MSI KT4A. The problems begun when i changed the motherboard and added the Seagate S-ATA hdd.
I have ordered new memory, Kingston HyperX 512mb (333). Could it be memory-related or something with S-ATA ????
I have tried everything, latest BIOS, latest VIA4in1, memchecks etc...

I had the same problem on a differnt mobo and all I did to fix it was switch the IDE cables around on the devices.
?Give it a try?
It may be a jumper you forgot to change on the IDE devices.

Msi kt6 delta lsr temp problem?

i have just installed a msi kt6 delta lsr , but when i have ran the system a while the sys temp is around 40-42 c and the cpu temp is around 52c .
on my old mobo the temps never went above 35c for the cpu and 25c for the sys temp .
my specs for old mobo etc =
AMD Athlon(tm) XP 2600+
jetway v400db (kt400 chipset)
400w psu
ata133 80gb hd (maxtor)
512 ddr333
geforce fx5800 ultra
windows me (but same in win xp pro)
2 fans blowing air into case and 2 sucking air out
does anybody know a way to improve the temps please

Yippee! A ME user, like me! You know I guess MS support for W98 and ME has been prolonged til 2006? It has partly to do with Linux.
The temperature for the CPU is a little high, but not alarmingly so. Barton gets a little bit hotter on these boards, and I think it is the placing belovw the PSU that is the cause. The system temperature for you is no problem.
To get the warmth away from the CPU I suggest a fan placed in the case door/side, that sucks it out.
Perhaps you have not got such a case door? Then I suggest a quiet 80 mm fan on the back of the case as high as possible, again sucking air out in order to make a nice air flow. Another suggestion is to tie away cabling to the sides of the case as much as possible, power cables, IDE cables etc.

MSI KT6-Delta-SR + Athlon 2400+ (266) Problem

Hey Guys,
I have a problem with the MSI KT6-Delta-SR and Athlon 2400+ (266).
I've tried about 6 different boards and 6 different athlon 2400+ (266fsb) and what happens is randomly when you turn the computer on the processor is displayed as an athlon 2000+ or athlon 1700+ (using different ram and other components too).
I check in bios and the fsb is still set to 133 (which should be correct for a 266fsb athlonXP).
Running latest bios for the board (v. 5.5) and have tried previous bios revisions.
Anyone come across this? is this an incompatability with the KT6-Delta-SR and 266fsb athlons?
could it be a v.core issue? (what should the v.core b for athlon 2400+ (266)?
Any help would be greatly appreciated.

Borjo jnc, aopen, gtr 350watt psu. it's not a psu problem.
yes 2 problems.
1. incorrect cpu recognition
and 2. random restart before xp loads.
after random restart cpu is recognised as either athlon 2000+ or athlon 1700+
this occurs sometimes before detecting hard drive, but mainly when second bar of windows xp pro loads (running xp pro +sp1 Plus latest updates and drivers. and regardless of what bios revision i'm using.
Tyco cpu id software says athlon2400+ and correct specs when booting properly. if i look at the top of the cpu is says athlon2400+

MSI KT6 Delta series problem!! :(

Hi there!
Im new to the forums so hello to everybody
Ok i have a problem with my new motherboard.
I bought the MSI KT6 Delta SLR i think ...
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=474
Ok before i bought this motherboard i used to have a ABIT KT7 Raid and it all worked well!
But i wanted a new 1 so i bought the MSI mobo.
The setup in my case didnt change at all i only replaced the motherboard.
I started it up and it couldnt find the HD's on IDE1 ...But it did find the CDroms , dvd etc on IDE2.
I changed it around so i had the HD's on IDE2 and CDROM's on IDE2 ...but it didnt startup after that ...
I changed them back and again it only found the CDrom's .
I thought hmz maybe i broke something who knows so i changed back to the old mother board and it worked well again
So it had to be the motherboard i thought ...so i went back ...got a new 1 same brand / type etc.
Again i did the same but now AGAIN it didnt find the HD's on IDE1 ...but it DID find the HD's on IDE2 .....
So now im stuck with only 1 HD and a dvd burner
What could be the problem ?
I tried everything....from " master/slave " and only 1 HD or only 2 HD's etc but then it either cant find the disks or it wont startup at all ....
Specs :
Maxtor 80g / WDC 40 g Harddisks
MSI KT6 Delta with sata raid etc ( check link )
Audigy2
Radeon9500
Pinnacle TV card
1024 ddr 400 mem ( in usersguide it says 4 banks..but i only have 3 .. ? )
Can someone plz help me ? going to work will check it later this evening. thxxx

how are the wd and maxtor jumpered
are they on an 80 wire ide lead blue end in the board
black in master grey in the slave
disable the sata in bios as in here as your not using it
http://forums.amdmb.com/showindex.php?s=&postid=2289803

MSI KT6 Delta and Auto update page problem

Hi, I have been lookin for the right forum to post this on for awhile heh but I have an MSI KT6 Delta FIS2R which has an auto update feature that uses an icon on ur desktop called MSI Live Update. This utility has been working for quite some time now but all of a sudden i get an error message in quote
"Microsoft JET Database Engine error '80040e09'
Cannot update. Database or object is read-only.
/autobios/VerChk/XSeries.asp, line 105"
I have been on a few sites including microsofts to try and figure out the problem but i get nothing concrete or at least anything i can understand, so I hope someone out here does and if so please help me! thank u

okay well I did that but does not seem to be working... also after just reading FAQ i noticed that the live update service is being updated which coul dbe causing the problem as well, but i dont know how accurate the date is on that I mean it is a FAQ. So.. is anyone else with this board having the same problem right now?

MSI KT6 DELTA FIS2R problems

Well, I finally received my new KT6 DELTA FIS2R motherboard (I replaced my K7N2 Delta ILSR). After getting the wrong model and one with missing parts... I think I received a defective one! I tried to format and make a new installation of Win Xp. While it tried to make its first boot, the thing crashed and it would not reboot. I tried resetting the BIOS and then i got the message: CMOS corrupted or damaged. (The diagnostic led indicated the same thing). I experienced another problem, while I was using my computer, the CPU was running at 60C, in windows! (before reinstalling). Does anybody has the same problems with their KT6 boards... Does it need to be returned?
Thanks for the help,
Valkyr

From your post its not totally clear where you are at. Does the system still POST?
First of all, it is normal to get some kind of error message the first time after clearing cmos. Entering bios or hitting the key for "load defaults" will make that go away. If you do that and errors still happen in bios then you have more serious problems.
As far as the temp goes, redo the cpu installation making sure you totally remove all the old thermal pad/compound and use proper amount of new stuff.

Need help from somebody with the "MSI KT6 Delta-FIS2R" motherboard

Hi everybody!
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard (the one with onboard LAN, Audio, RAID, S-ATA and IEEE1394 firewire). You see. I've got this board myself but it's been destroyd. Some values for the onboard devices in my board has been overwritten so that windows no longer recognizes the onboard LAN and Audio controller anymore. I really need some help from somebody with this board.
I need to see what the values for the onboard devices should be. I hope someone can help me by sending me a repport from the Everest home edition: http://www.lavalys.com/products/overview.php?pid=1&lang=en
If anyone could do me this favour, I would be VERRY thankfull

Quote from: HYSTERIAH on 12-November-05, 06:24:20
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard
HYSTERIAH,
With 76 Replies and 277 Views on your original thread, it looks to me like people have been trying to help you.
So there is no confusion, I am locking this thread so all your help and advice you receive will be in the same place, so people do not need to jump between threads to keep track of what has already been suggested for this mobo of yours.
Richard

[VIA] Problems with MSI KT6 Delta

Similar Messages

Maybe you are looking for