VIA S3G unichrome IGP driver, version 6.14.10.212

I am having problems with the above graphics driver, low resloution. Apparently I need a driver update, and I have searched and searched and the driver that Nvidia recommends, 5204-WHQL.shtml , according to my computer, it isn't the right one.
I found an updated version of 6.14.10.212 dated 08, fromCnet web site, I downloaded it and it came through as a 'zip' file which I have opened, but to install the update I need the 'exe' file, I cannot find one anywhere in this update or in the original.
Please advise, this is becoming a real hastle. Thanks.
My computer, Pavillion a420a, Windows XP, Firefox browser.

After update I have only garbage on the screen with Radeon HD 5850. Log shows fail only here:
[ 192.551] (II) RADEON(0): RADEONInitMemoryMap() :
[ 192.551] (II) RADEON(0): mem_size : 0x10000000
[ 192.551] (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
[ 192.551] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 192.551] (II) RADEON(0): Depth moves disabled by default
[ 192.551] (II) RADEON(0): Setting up accel memmap
[ 192.551] (II) RADEON(0): Memory manager initialized to (0,0) (3072,8191)
[ 192.551] (II) RADEON(0): Reserved area from (0,2880) to (3072,2882)
[ 192.551] (II) RADEON(0): Largest offscreen area available: 3072 x 5309
[ 192.551] (II) RADEON(0): Initializing fb layer
[ 192.551] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 192.551] (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x003f0000
[ 192.551] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 192.561] (II) RADEON(0): Initializing backing store
[ 192.561] (==) RADEON(0): Backing store disabled
[ 192.561] (WW) RADEON(0): Direct rendering disabled
[ 192.561] (II) RADEON(0): Initializing Acceleration
[ 192.561] (EE) RADEON(0): Acceleration initialization failed
PS: VESA works pretty fast now
Last edited by Andru (2012-03-29 22:01:48)

Similar Messages

How do I Install Windows 7 on Mac Book Pro via a Bootable USB Drive

Hi Guys,
I have a Mac Book Pro 13 inch, Early 2011 Processor 2.3 GHz Intel Core i5 (I initially had OS 10.5.8 which I upgraded to OSX 10.9.4 a few months ago).
When purchased it, I installed Windows via Super Drive (that being the only time i ever used the super drive). My Windows got corrupted for some reason 2 months ago. Hence, I removed the windows via Bootcamp to perform a fresh install. I discovered my Super Drive was no longer working.
Thereon I have been trying to install Windows via a bootable USB Drive but am failing to do so. After going through several forums, I have reached the following stage.
1. Created Bootable Windows USB Drive using Windows USB (http://www.wikihow.com/Create-a-Bootable-Windows-7-or-Vista-USB-Drive). Have used this USB drive to install windows on a DELL Computer
2. Bootcamp wasnt creating a partition for windows since no Windows Installation disc was being detected in super drive. (Solved it by downloading Toast Titanium and loading the .iso file on a virtual drive).
3. Boot menu was initially not detecting external drive, so installed rEFIt - An EFI Boot Menu and Toolkit. Now it is detecting the USB Drive.
Now when I boot from this device, it get a black screen with the message "No bootable device - Insert Boot Disk"
Request someone to please help me install windows as some softwares which I work with are windows based.

smartestidiot wrote:
So my understanding is that my Boot Camp Assistant (BCA), since it does not allow USB installer, it sets NVRAM to boot from Optical Drive. Right?
Yes.
So can I change it or update it to another BCA version which supports the same??
All BCA versions drive the logic based on the Mac Model Identifier. Unfortunately there is no real workaround. .
Please see https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Early+2011+Optical+Driv e+Replacement/5122
and https://www.ifixit.com/Store/Mac/Unibody-8x-SATA-SuperDrive-Post-Early-2009/IF16 1-073-2.

Oracle RDB driver Version 3.01.00.01 Connectivity Issue

I have a SQL Server 2000 extended stored procedure connecting to an Oracle RDB data server via an ODBC connection (using Oracle RDB driver Version 3.01.00.01). The SQL Server 2000 runs on a Windows 2000 Server.
This extended stored procedure opens up multiple database connections and maintains them for processing. Usually, everything runs fine.
However, every so often, we have connectivity issues. What happens is as follows:
When we bring a station down and then try to reconnnect, our connection is denied, and we get the error: "recv() unexpected close Ret 0 Err#0 UNKNOWN Unknown WINSOCK Error 0". (This error is logged by the .dll running in the SQL Server processing space.) From the first time we receive a connectivity error like this until the Oracle RDB box is rebooted, we cannot establish another new ODBC connection to that Oracle RDB box --- whether we are trying to establish it programmatically or just via a "test connection" in the ODBC dialogue on the SQL Server box.
We can, however, establish an ODBC connection to another, identically configured, Oracle RDB box from the SQL Server box (without restarting the SQL Server box).
Has anyone had experience with instable connections from Windows system using the Oracle RDB driver to connect to the Oracle RDB? If not, can anyone point me in a direction that would help me research this? I am more familiar with SQL Server than Oracle, and the Oracle DBA on the other end isn't very accessible.
I'd really appreciate any help anyone can give me.
Thanks!

I got same error.. Are you already solve that problem? how? please help me. Thanks

New e-Sourcing 5.0 Install - Error checking JDBC Driver version

Hi All,
I am currently attempting to install an e-Sourcing 5.0 Patch Level E instance on a Windows system using Oracle 10.2.0.3 and WebLogic 8.1 SP4. e-Sourcing's installation and configuration complete without issue. The schema in the database is loaded with the e-Sourcing tables and data.
However, when attempting to deploy the ear file via WebLogic, I receive the following JDBC error:
Error checking JDBC Driver version. Detail: Error: found unsupported JDBC Driver name: Oracle JDBC driver version: 10.1.0.2.0.
The JDBC driver in use is from my Oracle install ..\oracle\product\10.2.0\db_1\jdbc\lib\ojdbc14.jar
I've also tried classes12.jar for versions 9.2.0.8, 10.1.0.2, and 10.2.0.1 but always receive the same error (...driver version: 10.1.0.2.0...) message regardless of the version of driver I am using.
Error Log:
*** Starting Frictionless SRM (5.0.00 E build 08-Apr-2008.16:46) 2009-10-14 20:33:40.656 local3 DEBUG class=ConfigDatabase;server=CAGTAW804886;method=loadFromServletContext();thread=ExecuteThread: '4' for queue: 'weblogic.kernel.System' Cached weblogic.httpd.servlet.reloadCheckSecs=-1 from servlet context
2009-10-14 20:33:40.681 INFO local3 ExecuteThread: '4' for queue: 'weblogic.kernel.System' Disabling logging blackbox support
Unable to start server: unable to connect to the database: oracle [localhost:1521:orcl (SAP/SAP)]:0 reason: Error checking JDBC Driver version. Detail: Error: found unsupported JDBC Driver name: Oracle JDBC driver version: 10.1.0.2.0. Exiting.
Given that the database is loaded with the tables and data I know my instance can connect to the DB. Does anyone know why the deployment would complain that the JDBC driver is incorrect? Is there a way to disable the check and complete the server startup? Is there only a single specific driver that is acceptable for this e-Sourcing version?
Thanks,
Greg
Edited by: Greg Stewart on Oct 15, 2009 3:20 PM

The issue is still occurring.
The Supported Platform documentation indicates that the Oracle JDBC thin driver 10.2.0.1.0 is the supported driver. I have tried both the Classes12.jar and ojdbc14.jar for this version of driver.
What is odd about this error is that it always displays the same message and version #, no matter what version of driver I use.
"found unsupported JDBC Driver name: Oracle JDBC driver version: 10.1.0.2.0" (I execute setup and configuration each time I use a different driver to ensure the ear file is updated)
I have also tried using a different Driver Class path. The installation guides for 5.0 and 5.1 indicate Driver Class as oracle.jdbc.driver.OracleDriver. I have also tried oracle.jdbc.OracleDriver for a few of the versions with no success. I still receive the same error at the same point.
If anyone has run into a similar situation any suggestions or tips to resolving the issue would be appreciated.
Thanks,
Greg

Latest Windows 7 on latest Mac OS X via Boot Camp = display driver problems

I've just done (with difficulty) a Windows 7 installation via Boot Camp on my hot new Mac Quad. But when I use Photoshop Elements for Windows-- the problem may occur with other Windows applications too but I haven't tried them yet-- I'm getting frequent blackouts and recoveries accompanied by the now slightly infuriating error message, "DISPLAY DRIVER STOPPED RESPONDING AND HAS RECOVERED. Display driver Radeon ATI family stopped responding and has successfully recovered."
I'm also getting frequent spotty screens which suggest compatability problems. What gives? Are other people troubled by this? Seems to me that this is a problem crying out for an Apple software fix. But other people may have an answer now.

Did you uppdate to bootcamp 3.1? To update to 3.1 you need to have installed 3.0 from your Snow Leopard install disc. What version of the display driver are you using.
See this thread that just started too.
http://discussions.apple.com/thread.jspa?threadID=2345677
3.1 solved the "display stopped responding" for me. Of course that introduced other issues.
Check your driver version and read here for other display issues fun...
http://discussions.apple.com/thread.jspa?threadID=2328909
http://discussions.apple.com/thread.jspa?threadID=2307311
http://discussions.apple.com/thread.jspa?threadID=2315531

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I need to use a Driver Version 1.4 for my my Sharp printer. When I add the printer, it is driver version 1.3?

I need to use Driver Version 1.4 for my Sharp printer. When I add the printer it says Version 1.3?

Have you asked Sharp whether they have a driver that is Mavericks compliant?

Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio

I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.

Hey!
I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008.

Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it. Do you know what changed between 19.8 to 19.13?

Use of parameter sets with prepared INSERTS via Oracle's ODBC driver 8.1.6.4

Oracles ODBC driver, version 8.1.6.4, allows for driver configuration of three different batch auto commit modes. If I select COMMIT ALL SUCCESSFUL STATEMENTS and cause my app to execute a prepared and parameterized INSERT statement that makes use of parameter value sets, all records up to the first record that causes an error are committed. What is happening? The driver returns only one diagnostic record, with SQLGetDiagField returning the index of the bad record through the [SQL_DIAG_ROW_COUNT] field. Regardless of whether SQLExecute executed successfully or not, the [SQL_ATTR_PARAM_OPERATION_PTR]/ [SQL_ATTR_PARAM_STATUS_PTR] buffers are not initialized by the driver. Even more so, the drive returns SQL_PARC_NO_BATCH for SQLGetInfo when [SQL_PARAM_ARRAY_ROW_COUNTS] is passed. Does anyone know if the driver fully or partially or does not support use of parameter value sets. If it is only partial implementation, ignoring the parameter operation and status buffers, in my opinion, greatly diminishes any real use of parameter value sets. Does anyone known if the above problems disappear with use of Oracles ODBC driver, version 8.1.7.3.0?
All help is greatly appreciated,
Chris Simms
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Justin Cave ([email protected]):
What version of the database do you have on the back end?
Justin<HR></BLOCKQUOTE>
Oracle8i version 8.1.6. Looking at the specs that come with the ODBC driver upgrades, version 8.1.7.3.0 [which requires Oracle*i version 8.1.7] and 8.1.6.4, it seems that similar enhancements/fixes were made to both. I honestly do not know if what I am attempting is possible with either of the ODBC drivers. I really would prefer not to have to drop down to programming using OCI.
Chris
null

Problem Installing ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION)

Hi
I am trying to install ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION) which I got with the official ABAP Reference book of SAP press.
It is installing upto 91% and giving the following errors:
RC code form SyCoprocessWait = -2 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -2.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
Installation aborted.
I am trying to learn ABAP and need to practise it. Could someone please help me in this matter.

Restart the install and search this forum for "MiniWAS", "Mini Was", "620 install" and you'll find half a dozen people who had the same problem.

Memory leak in ODBC Driver version 8.1.7.8?

We have a web application connected to an 8.1.7 database on a MS Windows 2000 SP 2 server.
We recently upgraded ODBC driver from 8.1.7.7 to 8.1.7.8 and found that we ran out of virtual memory.
On further investigations, a simple refresh of our summary web page (going to the database to select a small recordset - even when there are only 2 records with 6 small VARCHAR2 fields) causes the virtual memory usage to increase by approximately 1Mb each refresh.
The same refresh using driver 8.1.7.7 occasionally increases the VM usage by 4Kb!
Is there a memory leak in ODBC driver version 8.1.7.8?

Hello Thomas,
thanks for your tips, but they did not help. Activating Connection Polling did not change anything. And opening another connection did not help, either. I did it the following way:
Sub memtest2()
Dim conODBC As New ADODB.Connection
conODBC.ConnectionString = "Data Source='xxxx';User ID='xxx';Password='xxx'"
conODBC.Open
Dim Rs1 As Recordset, Rs2 As Recordset, DB1 As Database
Set DB1 = CurrentDb
Set Rs1 = DB1.OpenRecordset("select id from artikel")
Do While Not Rs1.EOF
    Set Rs2 = DB1.OpenRecordset("select * from artikel where id=" & Rs1("id"))
    'do something
    Rs2.Close
    Set Rs2 = Nothing
    Rs1.MoveNext
Loop
Rs1.Close
Set Rs1 = Nothing
DB1.Close
Set DB1 = Nothing
conODBC.Close
End Sub
Perhaps one of you has another tip how this can be done.
@Lukasz:
using a seperate ADODB.Connection works fine, but that does not solve the problem itself. At first I would have to rewrite much code and the second much bigger thing is that the memory leak occurs even when working with bound forms in MS Access. For example: I have one large form with many subforms on it. If i go from record to record on this form the memory usage is increasing dramatically fast and there is no way to influence what kind of connection MS Access is using for bound forms.
Regards
Thorstem

GPU: currently disabled due to an error (unsuported hardware/driver version)

I still have problems after the last update (ACR 9).
There is a note - GPU: currently disabled due to an error (unsupported hardware/driver version).
I use AMD FirePro V4800 that is in the list of Adobe - Photoshop CC and CC 2014 GPU FAQ , as followed
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
I installed the latest driver from AMD site - Workstation
So, my system has the latest driver now
The release notes of the driver say that now my video-card supports
DirectX ® - 11
OpenGL - 4.3
OpenCL™ - 1.2
What could be wrong? And what should I do?
PS Photoshop also works strange: some of plug-ins (for example, by Nik Software) show a white window in the place where the picture should be.
Should I buy Nvidia Quadro K4200? But is was not in my plans at the moment when I did the last upgrade of Camera Raw.

Hello,
First, please consult the Camera Raw GPU FAQ for specific troubleshooting tips.
https://helpx.adobe.com/photoshop/kb/acr-gpu-faq.html#Suggested%20System%20Requirements%20 &%20Graphics%20Cards
You may need to completely uninstall/reinstall the drivers for your AMD card. Please consult the manufacturer's support site for the uninstall/reinstall procedures.
Hope that helps,
- Chris

How can I find the JDBC Driver version

Hi,
How can I find the JDBC Driver version installed on my Sun Solaris machine which
has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
do so or does Weblogic console say something about it
Thanks
Parikshit Khanna

Parikshit Khanna wrote:
Hi,
How can I find the JDBC Driver version installed on my Sun Solaris machine which
has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
do so or does Weblogic console say something about it
Thanks
Parikshit KhannaThere is a jdbc DatabaseMetaData call getDriverVersion().
The best thing to do is to download Oracle's latest appropriate
driver from their site, and edit the start-weblogic script to
make sure the downloaded driver is ahead of any weblogic stuff in
the server's classpath. We do ship a driver, but Oracle usually
has a newer better one very soon after that...
Joe

In Trouble with the Oracle JDBC Driver version - 10.1.0.5.0

Hi !
Without any problems i'm using the Oracle JDBC Driver version - 10.1.0.3.0 to access to the
Oracle database (Oracle Database 10g Release 10.2.0.1.0 - 64bit Production).
But exchanging the JDBC Driver 10.1.0.3.0 to 10.1.0.5.0 brings up the following problem:
the statement
con.prepareStatement(sql, resultSetType, resultSetConcurrency, resultSetHoldability)
(with parameters resultSetType = 1003, resultSetConcurrency = 1007, resultSetHoldability= 1)
returns null !
while using the Oracle JDBC Driver version - 10.1.0.3.0 the statement (with same parameters)
returns a correct PreparedStatement.
Every hint or idea is welcome.
Best regards,
Claus

Duplicate post:
In Trouble with the Oracle JDBC Driver version - 10.1.0.5.0
Claus,
Pardon me if I am stating the obvious, but why don't you use the 10.2 JDBC driver with your 10.2 database? The driver is part of the database distribution. Otherwise, you can download the driver from the OTN Web site.
Good Luck,
Avi.

VIA S3G unichrome IGP driver, version 6.14.10.212

Similar Messages

Maybe you are looking for