[VIA Series] memory and usb problems

Hello...... I have the MSI PM8M-V motherboard, intel celeron 2.93 ghz processor and 256 meg kingston ram. I am upgrading about 50 pcs with this setup. On some, the system will not see any of the USB ports and on almost all of them, the system reports that I have 192 meg of ram instead of the 256. Is this a normal thing with the memory and has anyone else had the problem with the USB ports. Thanks

Quote from: Maesus on 20-December-05, 15:37:44
part of the RAM is taken by the video. That's why you only see 192MB instead of 256MB (64MB is taken by Video).
USB ports? make sure you enable them in the BIOS.
Make sure you have the Chipset Driver updated for the USB problem.
You might also check how you have the Front panel USB’s hooked up to the header on the Mobo. Make sure it is correct.

Similar Messages

Asha 501 and USB problems with MAC OSX 10.9

I checked everywhere and I could not find any threads about this problem, so I'm asking here, in the official support forum.
The problem is:
Connecting the Nokia Asha 501 to the mac (via USB cable), and selecting "external memory", the memory card is mounted and I can browse the contents, BUT the photos show corrupted. I even lost some, because I tried to open them in the Preview app on the mac. (take a look at the attached photo of this post, a screenshot clearly showing corruption)
Importing the photos via Bluethoot works, and the photo on the phone are showing fine. The memory card is okay, I checked with an external card reader.
Also:
- This problem does not show with Windows 7/8
- This problem does show with other Mac OS X
The phone is updated, I flashed it with the Nokia Software Updater and I formatted the memory card.
Any help?
Attachments:
Schermata 2013-11-11 alle 17.13.07.png ‏285 KB

I have the same problem. Would be great to have a solution. I have some photos on the phone I'd like to use and keep, but at the moment they are stuck on the phone.
John

Nissan Altima BlueTooth and USB problems

Just picked up my 2010 Nissan Altima with Premium Sound Package (includes BlueTooth and USB). Palm P100EWW on Sprint.
Problem 1) Bluetooth pairs and connects, allows me to make or receive calls. However, it did not download my phone book, so I am not able to call people by saying their names. If I say List Phonebook, it says that there are no entries to list. Help!?
Problem 2) I want to play music via the USB. When I connect my Pre, the car screen says "Check Device" and will not do anything else. Help!?
Thanks in advance,
JimR

Class action lawsuit. I hate saying that as I think lawsuits are frivulous but ...
1) Bought my 2010 Altima in Oct. 2009
2) Non Nav System
3) Phonebook will not download
4) Phonebook works in Nav system
5) Engineer was brought in to research
6) engineer even had problems with other phones in non nav altima
7) i replicated issue and fix for the engineer in under 30 seconds
8) Fix = nav system works 100% no issues
9) Received phone call yesterday from Nissan telling me I'm FU&&ED!!!
10) requested they upgrade to nav system as that works
11) answer = I'm FU&&ED!!!

Plugin Containers hogging memory and Adobe problems

Hi,
I have regular problems with Firefox on my notebook. Firefox memory usage shoots beyond 500MB of memory and becomes extremely slow in any of the below conditions:
1) There are updates ready for some plugins: I thought it might be because I had enabled automatic updates and had made it manual. Still the same trend continues.
2) I run any Adobe application on the browser, like open a pdf from a website, run flash video either from Youtube or any other website.
3) I open about or more than 10 tabs on a single session (typical while reading news articles from feeds)
It was very problematic with FF4, but I continue to see the same trend even with version 5. When this happens, I do not have any other option but to close all the sessions of the browser and restart. Sometimes, Firefox does not go away from memory and I have to manually kill the process from task manager. There are several instances when the processor heated up so much, the fan could not handle and the notebook shutdown automatically. This happened when I had run youtube videos and after the video ended, let the browser window open for long time.
Here is the config information of my notebook:
Toshiba Portege M900, Intel Core i5 2.4Ghz quad core, Win7, virus free, with latest CA enterprise AV running.

Additional info:
The 256-color problem depends on how ActiveX'ed beans are integrated into native (VB, C++) apps.
If the development computer is configured to 256 colors, then on the runtime with 256 colors, the colors are ok.
If the development computer is configured to 16-bit colors, then on the runtime with 256 colors, the colors are wrong (dithered, ugly, wrong).
This tells me that the process where the ActiveX'ed bean is serialized to the C++ application resource file, some palette information must have been serialized out as well.
Question: what possibility is there to tell the ActiveX'ed bean or beans.ocx that it should update its palette?
A windows message? To whom, the ActiveX'ed bean, some component of it (HWND?), beans.ocx or some component of it? Sth that can be done within the bean's code?
Cross-posted to the plugin forum.
Sylvia

X58 Pro-E - Added memory and having problems.

Good evening.
My original setup was:
MSI X58 Pro-E, running V8.14 BIOS (think it's listed as 8.E on MSI site)
i7 920
6GB (3x2GB) of A-Data DDR3 1333 (Part number HY63I1B16)
eVGA GTX 285
Win 7 64bit Ultimate
I tried to find the exact brand/model of memory to add, but was unable. I ended up buying this: http://www.newegg.com/Product/Product.aspx?Item=N82E16820211451
I installed the memory and BIOS saw it all. Windows started up fine, reports 12GB, but the 2nd night after installing the memory, I got a bluescreen. I went ahead and ran memtest86, which reported several errors.
I took quick pic of memtest86 showing several errors here:
Before I RMA the memory, I wanted to make sure it isn't a configuration issue, rather than just bad memory.
Here's a pic of the memory tab from CPU-Z:
SPD tab (slot #1 "old" memory):
SPD tab (slot #2 "new" memory):
And here's a pic from SIW's memory tab:
What do you think? Bad memory or configuration issue? Thanks for your time.

The mixed config is not ideal. You may want to try however to set it all manually in the BIOS and see if you are able to get it to work.
Disable XMP in the BIOS.
Set your mem ratio so that your mem speed is at 1066. Set your timings manually to 9.9.9.25 or 8.8.8.22 and test.

Gx630 and usb problems

I've tried on numerous occassions to connect my sony ericsson phone via usb to my gx630 using any of the 3 usb ports with no luck in the computer recognizing the phone. I've installed/reinstalled the driver software numerous times. Pretty much gave up as I thought it was a problem with the phone.
Now I just bought a digital camera and while the gx630 recognized that a Canon camera is attached via USB, I get the following error when I go to Device Manager and in the device status box it states the following:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I then select "check for solutions" and get no response.
At this point since I cant connect 2 different USB devices, I'm guessing its a problem with the gx630. Anyone have any ideas where to start correcting the Canon camera USB connection problem? Not so much worried about the phone at this point....thank you for your assistance.

Do OS repair

[Athlon64] Ram and USB problems!

Hi to all, this is my first post so be kind and patient.
My system:
(Hardware) K8T Neo2-F (VIA K8T800pro & VT8237), Athlon64 3200+ 939, 2x 256mb Kingston KVR400X64C3AK2 (Nanya) ram sticks, Maxtor DM 120mb SATA drive connected to SATA1, Liteon DVD connected to IDE2, Liteon 350 power supply.
(Software & Drivers) Win-XPpro SP2, VIA Hyperion 4in1v456v, VIA RAID OM74 v4.12, VIA USB2 V260-L.
I’ve got 2 problems:
Firstly, the board will not post unless I stick the 2 ram modules in DIMM 1 (Green) and DIMM 2 (Green) and ONLY reads 256mb while there is 512mb in there.
It also operates in single channel mode and not duel channel mode.
I checked the 2 ram stick with Cpu-z and it registered 512mb in single channel mode.
I tried putting 1x256mb in DIMM 2 (Green) and 1x256mb in DIMM 4 (Purple) as the manual says but NO GO!
I tried putting 1x256mb in DIMM 1 (Green) and 1x256mb in DIMM 3 (Purple) but also NO GO!
Secondly, when ever I try to plug in any USB device it slows the computer to a disabling pass especially when starting up window.
Can any one help please?
Many thanks.

Thanks Tiresmoke,
I updated the Bios to v3.3 and every thing is much better now. The board reads 512mb; one 256mb in DIMM1 (Green) and another in DIMM3 (Purple), and in duel channel too.
The only problem I have now, is that after XP loads there is about 20 secs of darkness and I have to move the mouse a little before I can enter in to XP's desktop, otherwise it restarts and goes into F8 (the safe mode screen)!!
That will have to do right now untill I find a solution for the moving mouse thing!
Thanks again.

KT6V-LSR LAN and USB problems

This is my second KT6V-LSR, the first was dead out of the box - no power what so ever.
I'm using an AMD Athalon XP 1600 and Windows 98 SE (wife's computer and I don't want the hassle of changing her over to XP). She just uses it for internet and email and to create patterns for her embroidery sewing machine.
When I installed the drivers from the CD, my USB would not work nor did the LAN.
Looking at the system devices I see the following problems:
For the Network Adapters - VIA RhineII Fast Ethernet adapter I get: The NDIS.VXD, NYKERN.VXD device loaders for this device could not load the device driver (Code2)
The VIA Tech 3038 PCI to USB universal host controller I'm getting: The NYKERN.VXD device loaders for this device could not load the device driver (Code2)
Where are these supposed to be located? I don't see them on the CD.
I'm also glad to read that this board has a boot-up problem. That is the main reason I got rid of the old ECS board. It would sometimes lose it's BIOS when it booted. At first I thought it was a cold problem, but then it would sometimes do it on a reboot. And yes I did put in a new battery. The problem was still there.

Hello.
Windows 98 is not recommended on the new boards as you may run into serveral problems with drivers.
USB 2.0 drivers VIA 4in1 drivers
Some drivers for you to try,
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=511&kind=1
Is that windows 98 you are using or windows 98se?
98 is a bad choice.
You should use windows XP.
Your other post about BIOS settings, post your questions there and people will try to answer them. Online forums have all the answers.

10.5.6 update and USB problem.

Since upgrading to 10.5.6 whenever I attach my ipod or sony reader it now takes 4 or 5 minutes before the computer recognises that a USB device has been plugged in.
Anybody else had a similar problem or knows what is causing it.
Many thanks,
Allen.

I had a kernel panic with a USB-connected scanner. After a lot of experimenting, I changed the USB port the scanner was plugged in to and everything worked fine.
Try plugging your USB accessories into different USB ports. It couldn't hurt

10.4.7 update and USB problems

I have been experiencing problems with my USB devices (other than my Apple mouse and keyboard) since updating to 10.4.7. I have a card reader, a Palm device, a USB midi keyboard and a digital camera dock connected to a USB hub connected to the back of my Studio Display.
Randomly they start to beep like they do when the system boots or they are connected or reconnected without anything or anyone touching them. Sometimes they just beep, other times I lose functionality until I disconnect and reconnect the hub or device.
I have disconnected all, and connected just one or another (without the hub as well) but no matter what is connected I still get the same issue of the system thinking the devices are connecting or disconnecting at random times. This is new with 10.4.7, as I have had the same hardware connected as far back as 10.2. Anyone else having this problem, loss of USB functionality or sollution for such since updating to 10.4.7?

I too am having many of the same issues as all of you. I have my keyboard, mouse, and printer hooked up to a NEC USB 2.0 Manual Share Switch Hub. The hub is connected to a non-factory USB 2.0 card I installed in my PowerMac. Before the 10.4.7 update, I had none of these following problems.
Everything works and has worked great until I put the computer to sleep. Upon waking, the USB hub refuses to acknowledge my computer. I also get two strange beeps as it is waking. And because my input devices are hooked up to the hub, I am unable to do anything but restart the computer, upon which all becomes well again with the usb hub.
I defintely prefer to put my computer to sleep rather than restarting it everytime. Hopefully apple provides a fix soon; I really don't feel like messing with extensions. I could always revert back to 10.4.6, but I guess I was being optimistic that the fix would come soon. APPLE, get on it!
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)

Elitebook 8460P - Shutdown and USB problem

We're having a very odd problem. When the system (HP Elitebook 8460P running Windows 7 x64 Enterprise) is online over wireless, everything works fine. HOWEVER, 2 very odd behaviors manifest if the system is not connected to a wireless internet connection:
- It will not shutdown. The system will hang at "shutting down . . ." message. If the power is turned off (5 sec press on power button), it will boot up the next time saying that it was not shut down properly.
- one of the USB 3 ports will not work (this is incredibly odd!). Not sure how the 2 could be connected, but apparently they are!
The system is well-maintained, and shows no signs of viruses or malware. All drivers and software are up to date, including BIOS. If the system is connected any working wireless connections, neither problem occurs.

RNGhatesMe wrote:
We're having a very odd problem. When the system (HP Elitebook 8460P running Windows 7 x64 Enterprise) is online over wireless, everything works fine. HOWEVER, 2 very odd behaviors manifest if the system is not connected to a wireless internet connection:
- It will not shutdown. The system will hang at "shutting down . . ." message. If the power is turned off (5 sec press on power button), it will boot up the next time saying that it was not shut down properly.
- one of the USB 3 ports will not work (this is incredibly odd!). Not sure how the 2 could be connected, but apparently they are!
The system is well-maintained, and shows no signs of viruses or malware. All drivers and software are up to date, including BIOS. If the system is connected any working wireless connections, neither problem occurs.
Hello!
I suggest you open your command prompt and run the "sfc /scannow" command to ensure that your system files are intact. Make sure to post the result.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Ti4800SE-VTD. Direct3D, memory and IRQ problem

Hello,
I have a dual boot pc (Windows ME and XP). Direct3D on ME does not work, but it does work on XP. I test it with dxdiag, using button Test Direct3D and after a flash there is the error: "Direct3D test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x887602eb (error code)"
On startup of dxdiag there is another error saying: "... not enough memory...". The tab Display shows no information on Chip and DAC, and approx. total memory is 1.0Mb.
Using System Information of Windows I see a lot of differences between ME and XP regarding IRQ (10 resp. 16) and memory addresses.
I installed DirectX and the video driver for both Windows using the cdrom that came with the video card.
My idea is that the IRQ is not good, but I don't know how to correct it. Maybe there is something else going on. I don't know what to do anymore.
Can anyone help me out?
Regards

Thanks for the reply.
What kind of specs do you need?
I installed directx8.1b and 9.0. Both have the same problems.
Motherboard is MSI 845PE Max2-BFIR.
I can't find any bios settings regarding video.
So, I wonder on what basis XP and ME decide to use certain video settings like IRQ and memory. XP defines IRQ 16 and only 1 other periphial uses this IRQ as well. ME defines IRQ 10 for the video card and about 5 other periphials use this IRQ as well. And I think this causes the problem.

790GX G65 Firewire and USB problem

I've m-audio firewire 410 sound card and cubase5 (has a usb dongle to work)
before this mainboard I was using K9A2 platinium V2 and Amd 9950 cpu everything was working perfectly
now I've upgraded my board (as you see) and bought a AMD 955
now when I install the sound card driver it's making somekind of digital distortion and also the sound is moving to faster or slower (all the time) so I'M hearing funny voices
The Cubase5 Usb dongle is having some connection problem. It force me to change the usb port everytime I start cubase
I've updated my bios but guess what.... They're still with me.
Please some help
I'm using Vista home premium 32, I've tried it on Xp and windows 7 64 RC7100 the resoult is always the same

Quote from: Bas on 19-July-09, 16:39:47
Are the energy settings properly configured for USB and the CPU?
Could be Cubase doesn't like Cool & Quite?
Can Cubase work with quad-core?
Can the powersupply handle everything?
What is in your system, we don't know much: >>Posting Guide<<
Read the guide this time.
My system is
MSI 790GX G65 , AMD 955 BE, Corsair 1600 MHZ 4 GB (TW3X4G1600C9D) , 6 HDD (one is IDE), ZOTAX 9800 GTX+, 750 watt PSU(corsair TX750W)
I've some pci card for my music buss. but i didn't install them yet. Not before everything works fine
Cubase works fine with quad core , my ex-system was a quad core.
the problem with cubase comes this way. I turn on the pc (dongle is on all the time) start cubase and get the message "Connection problem with dongle change the usb port) after I change it everthing works fine. infact I'm not making cubase problem a big deal. my real problem is firewire.
About the energy settings, I didn't change anything on mainboard, why do I need to change the power settings for usb? aren't they standart?

LENOVO K3 NOTE ISSUE-BATTERY DRAINING FAST AND USB PROBLEM!!!!!!!!

i have a problem in my K3 note, bought recently through flipkart..the phone was working fine but suddenly, now USB is not detected...whenever, i attach to the AC charger or charge with USB connected to laptop, it is neither getting charged nor USB is detected... But if i switch off the phone, now the phone gets charged... i have not been able to identify what the bug is about? i have factory resetted and also the battery was removed several times..however, the same problem is occuring.... Hope, i can get a solution from this portal Battery is also draining fast after this bug has started. Thanks in advance.

since many people reporting the heating issue.
i would like to ask you a favor to help me to do a experiment.
i am not sure if you guys know we have a feature called "background app management", it can restrict background tasks to block them consuming current drain. The heat could be generated by drain consumption.
the feature is at Settings->Power manager->Background app management.
I made a video shown at below link:
https://drive.google.com/file/d/0B9700J-TyX52clFQUWRDUEVHWlE/view?usp=sharing
Please let me know if you can get some benefit on this issue.
Thanks
Wang

HP DV3-2230ea BIG Touchscreen and USB problem.

My laptop HP DV3-2230ea was working fine earlier. Now the touch screen is not working and the laptop continuously detects a new USB device but it cannot be recognised, then starts over and over again, with the annoying sounds.
Help PLEASE

For the touchscreen not working...Try and install the Touchscreen driver from this link and check...
On the USB issue, to start with can you post the screenshot of the device manager, we can take it from there...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

[VIA Series] memory and usb problems

Similar Messages

Maybe you are looking for