[VIA Series] PT880 NEO-FSR

Hi Everyone, I nned your help!!! I have a Intel PIV Prescott 2.4GHz, 533 1MB Cache, 512Mb Ram, 120Gb Hard, and a MSI 16X Burner + 1 MSI PT880 Neo-FSR (601-7043-020) and a MSI FX5200-TD128 (LE) Video Card and the problem is that working under Windows XP I´m having terrible problems and blue screens sayin things like this:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Technical Situation:
STOP: 0x000000D1 (0x0a060016, 0x00000002,0x00000000,0xffecc216)
Portcls.sys_address F7ECC216 BASE AT F7ECB000 DATE STAMP 41107F13
and other screens that I couldn´t write them down.
Before I bought this PIV, I was usin a K7N2Delta + Athlon 2600+ and I never had this problems!!! So I dont know what to do... Please HELP ME !!!!
Thanks !!!!
Marcelo Siciliano From Argentina - Buenos Aires

Hi again !!! Aicom I´m using a 512 mB DDR Markvision Pc 3200 400Mhz RAM Moduile....
I Think that maybe the problem should be in the compatibility between thwe MOBO and the Video Card... MSI FX5200
Please If U have any Data at all, please let me know...
Thanks from Buenos Aires, Argentina...
Bye

Similar Messages

[VIA Series] PT880 Neo-FSR...SOOOO ANGRY!

Hi all,
I bought my PT880 Neo-FSR around late January/early February and until recently I hadn't been doing anything too memory intensive. Recently I bought World of Warcraft and have had many crashes. First it was tolerable, then when it got really bad i thought it was Blizzard's fault. I checked their boards and went throught their steps to rectify. One of which was the memtest86.
I ran the memtest and found that my Corsair was bad, both sticks! So i tried some Kingston. All of it also bad. 7 sticks of memory. I thought, "There's no way that could be right." So I ran memtest on another computer, a cheapie eMachine. Every piece of memory i had was A-ok. I thought i'd get a third PC involved for a final say. I ran the memtest again (mulitple passes each time mind you) and again no errors.
I came here to see if anyone else had a similar problem, and yeah. But no solution for me. This is pretty much my hail-mary. I'd really like help from someone more knowledgeable than myself. I really do not want to buy a new mobo, but WoW is a subscription game...i'd really like to play it as well as edit video, or record stuff with my video card.
If you have any solutions for me PLEASE, I really need help. Thank you for taking the time to read this.

ConeJodc, it's not your memory. Some will tell you it's your pwr supply, some will tell you to change your ddr voltage... it's none of that. This mobo is crap in my opinion because it's got the VIA name on it. Everything I've ever owned that had a VIA chipset eventually blew up (usually it was crap to begin with).
See my latest update in my post regarding this motherboard.
https://forum-en.msi.com/index.php?topic=79880.0
The same memory that tested bad in my PT880 Neo-FSR runs perfectly fine in my new 865PE Neo2.
Return it if you can and get the intel based 478 board.
VIA =
Intel =

[VIA Series] pt880 neo fsr - win xp pro install problem

Can you help me please?
In the course of Windows XP professional installation the Blue screen appear (IRQL_NOT_LESS_OR_EQUAL ***STOP: 0x0000000A) just after formating to ntfs. I have a inovated Bios version 1.9 (p4 3.0Ghz prescott). How next.

Hi,
Clarify:
Ram tested in PT880 chipset MSI mainboard
All DDR 400
1) Corsair 2-2-2-6
2) Twinmos 2.5-3-3-8
3) Infineon 2.5-4-4-8
4) PNY 2.5-4-4-8
5) Generic 3rd on 3rd (Cheap as chips stuff)
All tested in MSI mainboards as well . 865Platinum, 848P Neo-s and 845GE max
Please note:- I buy memory second hand, so I have to run memtest86.........
Also, I use Enermax PSUs.
Here to help
Del

[VIA Series] PT880 Neo-FSR hangs during POST after connecting USB device

I "successfully" built a new machine from scratch for the first time. Windows 2000 was installed and working with updates. I connected an iPod to a USB port (during the iTunes software installation) and the machine froze. After a power cycle, the machine will not successfully boot. After the fact, I discovered that the grounding wires on the USB2 connector were no longer connected. I'm not 100% sure that I plugged the iPod into the USB ports connected to USB2, but that's a good assumption.
On reboot, the screen starts normally. When the line "DEL: Setup F11: Boot Menu F12:Network Boot TAB: Logo F10: Flash Recovery" appears, the machine stops. The next line reads "Flash Recovery". The D-Bracket2 indicator lights stop at "Testing Base and Extended Memory".
I'm unable to select any of the options to enter the BIOS setup, etc. I tried clearing the CMOS data using the jumper and I now get the logo screen, but the system still hangs with the same D-Bracket2 lights.
I do not have any spare memory, so if I need to swap it out for diagnostics, I'll have to go shopping.
Is there any way to salvage this board or did I permanently fry it?

No luck on entering BIOS or getting graphic screen to clear.
To clarify, I cleared the CMOS in despiration after the system hung and I couldn't get into BIOS. I don't remember all the details from the original screen (before it was obscured by the graphic!), but I know that there was no "error message" per se. Everything appeared normal except that "Flash Recovery" appeared an additional time below the "DEL: Setup..." line. Before clearing the CMOS, I had no apparent response from any key. (DEL, F10, F11, F12, etc.)
I'm inclined to assume that I managed to actually fry something on the board, but I'm hoping to get that confirmed before buying a replacement.

[VIA Series] PT880 Neo - 2 dead PCI slots?

Scanning through the forums, I didn't see anything relevant so here goes.
I bought my board not too long ago and have been slowly adding peripherals to my system. I try to spread things out when choosing a PCI slot for a new card. Well, looking at my sig, I have discovered that two of my PCI slots are dead.
When I say dead, I mean that I'll install a card there (previously never installed), boot up to Windows, and wait for the Found New Hardware dialog. I think that this is slightly broken, so I go to the Device Manager and none of my new items show up with uninstalled or installed drivers. I crack my case, move the card to one of the working slots, and everything is dandy.
For the record, I refer to PCI 1 as the closest PCI slot to the AGP slot (most central physically on the motherboard). Inheritently, PCI 5 is the slot closest to the corner of the motherboard. I am having problems with slots 2 and 3.
I am hoping that there is a dip switch or a rule similar to memory slot usage that will fix this problem. I have not found a solution yet and am hoping that someone here can help.
Thanks.

Update the BIOS, clear the CMOS, if ur problem is not solved, RMA the mainboard.

PT880 Neo-FSR -- Px8 Neo-V Error in XP and games..

Hi!
OK.. Why is there so many problems with this motherboard? 3 days have i had this card and just problems ... WHY?
I have updated the bios to v1.9 Uhh! Now i can come ind to XP without the blue screen saying Hardware error...
But i can't still not play any games... example Underground 2 nice game. the same about all benchmark tools (3dmark)
I have tried old and new drivers! nothing helps.
Thanks!

Everest 1.51 writes it is a MSI Px8 Neo-V (MS-7043) with bus on 800MHz !!!
Thats really nice! The board is a 533 thats oc'et... :(
VIA® P4X533 Chipset
- Supports FSB 400/533/(((800MHz (over chipset spec.))) <--- WHY
- Supports AGP 8X interface
- Supports DDR 400(over chipset spec.)/333/266 memory interface
A did buy it as a PT880 Neo-FSR (((PT880 = 800MHz)))
PT880 http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=636
Neo-v http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=593
There is just one thing? my board has 3 memory ports but neo-v has just 2...!
Memtest? Why? My Hardware works 100% on my fiancé's computer... The only thing that is 10% is the motherboard...
I will give back the board and hope my Abit VT7 comes soon...

PT880 Neo-FSR P4 3.2G with HyperX HELP

I have been reading the forum for 2 days now and I'm still unable to find a solution to my problem. I have tried every suggestion I've found in this forum with no success. So, as a software dude I'm not the best hardware guy and I'm requesting help from any hardware guru in here.
Problem:
PC reboots constantly or locks up or blue screens this started after I loaded WinXP pro SP2.
Setup:
PT880 Neo-FSR (7043)
P4 3.2G
Kingston HyperX KHX3200A/512R
SATA 250GB HD
Tried Solutions:
1. Changing DRAM voltage ranging from 2.6v - 8v (problem got worse or persisted)
2. Tried running in different turbo modes. (problem got worse or persisted)
3. Tried changing DRAM clock to all kinds of settings.. (problem got worse or persisted)
4. Did not try changing any DRAM timing cause I'm not sure of the effect...
5. Upgraded BIOS rev to 2.0 in hoping to fix the issue. (no effect on problem)
6. Will contact Kingston next week for recommendations.
Thanks in advance for any help suggested besides purchasing new RAM

Have you tried update the VIA drivers?

MSI-7043 (PT880 NEO-FSR) Boot Problem

I just installed this motherboard which I purchased on eBay from someone who swears it was working fine before.
I installed it in the following configuration:
MSI-7043 PT880 NEO-FSR Motherboard (Rev. 2.0) with BIOS version 2.0
RaidMax Scorpio case with a 520-Watt RaidMax Power Supply (its older, but digital P/S tester says everything is OK)
2x1Gig SuperTalent DDR400 RAM <- Was working fine in Compaq PC
Intel P4 2.4Ghz Prescott CPU (FSB533) <- Was working fine in Compaq PC
ThermalTake TR2-M12 CPU cooler <- New
LG DVD-RW Lightscribe 22x IDE Drive <- New 2 weeks ago, was working fine in Compaq PC
Seagate 320 Gig IDE Drive <- 2 Monthes old, was working fine in Compaq PC
(Drive is partitioned 1-250Gig Bootable & 1-70Gig)
Chaintech Nvidia FX5200 AGP Video Card <- Worked fine in Compaq PC
High quality round 80-pin IDE cables
No SATA drives installed at all
The system POST's fine and recognizes all installed drives, but only occasionally will boot to CD-ROM, and will never boot to hard disk, just sits there with a flashing cursor. When it did boot into CD-ROM, I was able to boot Linux and browse hard drive fine. Booted once into MEMTEST and it ran for hours fine with no errors.
I have tried defaulting BIOS several times, tried several configurations for boot sequence and using F11 Boot Menu. No matter what I do, booting from CD is hit and miss (1 out of 4 times will boot) and it will NEVER boot from the hard drive.
Interesting thing is if I disconnect the hard disk, it will boot to the CD-ROM EVERY time (sort of), but I do have to wait until it says no boot record found on CD or floppy, then press ENTER to try again it boots
After searching for through other posts, I have tried increasing the DDR RAM voltage to 2.6v with no change.
Any ideas??? is there a BIOS limitation to the boot partition size of the hard drive, if so why would this affect booting to the CD?

Ummm... never had that trouble before... It should at least start booting, or at least recognize the boot sector has a valid boot record.
Those are all valid ideas, and I appreciate the input.
BTW, I am not a newbie. I am a telecom, network, and computer technician with almost 20 years of experience. This is just the first time I have had a problem with MSI boards, I use them all the time and they generally work flawlessly. I understand operating system licensing, OEM versions, 32 vs 64 bit, and how to copy files from one drive to another using multiple different ways. I was just hoping that there was something simple going on that I was missing that someone would just say "Yeah, turn XXXXX feature off in the BIOS".
I put an older 48x CD-ROM drive and a Western Digital 40 Gig in it and it worked beautifully, in the middle of installing Kubuntu Linux right now.
I actually resized the boot partition down to 130 Gig with Linux Parted Magic and it booted OK.
I think I actually had two problems with the previous setup:
1) Boot partition was too large for the BIOS, the entire partition should not exceed the 134 Gig boundry (different sites say anything from 130-138 Gig) for the BIOS on the motherboard according to some articles I googled.
2) The LG DVD-RAM drive was just too slow spinning up for the bios to recognize the boot partition on the CD or DVD.
I resized the partition back up to 250 Gig and put the DVD-RAM, Hard Disk, Processor, RAM, and video card back into the Compaq, it is a fast (by standards of the day) and stable machine, I was just looking for a way to add some expansion capabilities for more PCI cards and possibly a SATA drive. Anyway put a 2.0 Ghz Celeron, 768 Meg of DDR266 RAM, a CD-RW drive, and a Matrox G450 Dual-Head 32 Meg AGP card I had laying around in place of of the old and will just delegate this to a Linux box.
So far all seems fine, think I will just hold off putting too much into this machine since I was planning on building a new one this summer after USB 3.0 came out.
Thanks.

PT880 Neo-FSR not booting from SATA device

Hi everybody!
MSI PT880 Neo-FSR http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=608
As read on the topic subject, I'm having trouble trying to boot up using my new SATA DVD-RW. This device works perfect while running Windows XP on my PC, but when I try to boot from it, I simply can't.
My PT880 Neo-FSR mobo is running the latest avalaible BIOS version (2.0) and Internal SATA controller and SATA boot ROM function are enabled. Looking inside the booting options, I just can't set my SATA DVD-RW as a valid device for booting up (I only see my IDE HDDs, FDD and LAN as booting options).
This is my first time triying to boot up from this SATA device and the first time I realized that I can actually use it for anything but booting, which is so weird! I even tried installing this device on my brother's PC and booted up succesfully there, so my mobo is the problem here.
If you're asking yourselves how I installed Win XP on this PC with no CD/DVD booting: My former IDE DVD-RW is now my sister's, so I kept previously instalation and just changed devices.
I need to run some utlities from a boot-CD and re-install Windows on this PC real soon, so I'd appreciate some help.
P.S. I tried to do my best with my 'rusty' English, so I hope you could fully understad what I've written above.

Quote from: Henry on 03-September-08, 14:26:24
Are you saying it does work but you simply can't boot from it? Have you tried by using the F11 boot menu?
Yes! This device has been working great, but the only problem I get is when I try to use it for booting.
I alredy tried using the F11 boot menu and nothing happened... It's so weird!

PT880 NEO FSR and Audigy 2 ZS

Has anyone with this motherboard been able to get this card working without constant and annoying crackling/stuttering during gameplay? I've tried everything mentioned on the Creative forums to resolve the issues I'm having, but nothing has worked. I'm starting to think it's the motherboard chipset.

Quote
Originally posted by Del UK
Hi,
17Amps on the +12V rail..............
Buy or borrow a PSU with 30+Amps on +12V rail or go for dual channel...........
Your system is drawing to much power through the+12V rail and you are hearing this.........
Del
I considered that too until I saw phishingtime's sig:
XP Home SP2
Intel 3.0E
PT880 Neo-FSR BIOS 1.9
512MB Geil 2.5, 8, 4, 4 PC3200 400MHz
MSI FX5600 VTDR128 550MHz Mem 325MHz GPU
420W Raidmax +12V=13A, +3.3V=26A, +5V=32A
WD 80GB Caviar 7200RPM W/8MB Cache
Master/BTC 16x DVD Slave/CD-RW
Audigy 2
He's running the card with no problems with a weaker PSU than I have. The only difference is he's running BIOS version 1.9 and I can't get anyting other than 1.6 to run stable on my computer. When he originally replied that he was having no problems with the card, he was also running BIOS 1.6.

PT880 Neo-FSR Cant get dimm slots 1 or 2 to read any memory

i just got a PT880 Neo-FSR so i could upgrade to a 8x agp video card
but when i got everything installed it only reads my memory at 258mg
and it says the other slots are emepy but i got a nother stick in them
power supply is a 550w so i dont thinks thats the prob i tryed messing with all the memory settings in bios still nothen i dont know what else to do

you have a few choices...
But before anything, the BKM of this forum, read the Moan Guide.
OK, here's your choices:
1. run Memtest86 check if your RAM is faulty.
2. RMA the board.

GBLAN failure on MSI PT880 NEO-FSR

On a newly built system using the MSI PT880 NEO-FSR I am experiencing intermittent and frequent disconnects from my LAN. I have tested with both Win2000 and WinXP. When the system boots, I generrally get an IP address and gateway address. If I start a continuous ping on another host, after a short while I start receiving "Hardware Error"messages, and Destination host unreachable. Ny IP in most cases is still good, however sometimes it reverts to autonet. If I do ping successfully for a while and start IE, it fails immediately. I have the link with another system, and it works fine...Any ideas?
Thanks, Gary

I have removed components from the system to simplify troubleshooting...the current configuration (still fails) is as follows:
Power Supply - PC Power & Cooling Turbo Cool 300
Processor-Intel Pentium4 Socket478 3.20 GHz 800MHz System Bus 512kb L2 Cache BX80532PG3200D HyperThread
RAM-2X512MB PC32 400MHz Dual Channel Kit http://www.ocztechnology.com
AGP-Video-PNY-nVIDIA Verto GeFORCE FX 5200 AGP-8 128MB DDR
PCI32-SCSI-Adaptec AHA-2930c
Hard Drive - Western Digital 120GB WD1200JBRTL UDMA-100 7200RMP 8.9ms seek
Drive-CD-RW-Plextor PX-W1610TA 16X-10X-40X EIDE
Drive-CD-R-Plextor 820Ti SCSI
Mitsumi Floppy Drive
Thanks again,
Gary

Pt880 Neo Fsr Xp Install Probs

hi
just bought a new pt880 neo-fsr(7043-020) and a 512 ocz dual ddr kit.
i am running a northwood 2.4ghz/533(not overclocked yet) cpu and an ati 256mb 9550 video card(8x agp).450 watt psu with 20amp 12v rail
my problem is when i try and install windows xp-pro i get an error"the bios is not acpi compatible" the board has bios 1.6 installed out of the box.
everything else seems ok.
has anyone seen this before and can they post or email me a few pointers.
thanks,jeff

So, you were able to finish off the Windows installation ? No hangs at the bios-message ?
Bios 1.6 should be sufficient but try with latest 1.7 biosversion.
When you reinstall WinXP - check that ACPI is enabled in bios before installing OS.
If you have an ACPI BIOS, but Windows XP Professional is not installed in the ACPI mode, your ACPI BIOS might be noncompliant. Check with your computer manufacturer to see if a more recent, ACPI-compatible BIOS is available. If Windows XP Professional is installed in non-ACPI mode on your computer, and you upgrade to a new BIOS version, you must reinstall Windows XP Professional to enable ACPI mode.
http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prdc_mcc_htev.asp

PT880 NEO-FSR always needs to autodect hard drive

I have a new PT880 NEO-FSR motherboard which takes 30 seconds to autodetect the harddrives every bootup.
In the bios, it recognizes my hard drive but does not seem to keep it stored and upon rebooting displays "autodecting pri hard drive..press to abort". This happens every time I boot.
I have an u-ata 100 Western Digital hard drive that I've stuck on other systems and had no problem.
My experience with other motherboard/bios is that when I set autodetect in the bios, it recognizes my hard drive, stores that value and upon rebooting does not need to autodetect my hard drive once more.
Any suggestions would be greatly appreciated!

manually set the HDD specs, the heads, sectors, and stuff are printed on the disk itself, i almost never use auto detect because it can slow down boot time.

[VIA Series] PT880 doesn't recognize SATA disk at first boot

Hello everybody,
I have an MSI PT880 that works fine since one year with a 40 Gb ATA Maxtor hard drive.
I have just bought a 80 Gb SATA hard drive (Maxtor model 6L080M0) and have a very annoying problem:
- when I power on the computer, the VIA Sata Bios tells me that it doesn't find any Sata disk (and WinXP doesn't boot...),
- then if I press Ctrl-Alt-Del or the Reset button to boot again, the Sata Bios find the Sata disk (and WinXP starts...),
- as long as the computer isn't power off, I can reboot many times, the Sata Bios will always find the Sata disk and boot WinXP,
- but if I power off the computer, then power on, the Sata disk is not recognized.
I'm sure that the hard disk is not defective, because I have tried with another one (same model), and the same problem occurs.
I also tried to flash the Bios to the latest release (1.9), same problem...
My Config:
- MSI PT880 Neo-LSR with latest BIOS available (V1.9)
- INTEL Pentium 4C 2.4 Ghz
- 2 x 256 Infineon PC3200 (Dual mode)
- SAPPHIRE 9800 Pro
- ATA Hard drive: 40 Gb Maxtor (6E030L0) on first IDE controller
- SATA Hard drive: 80 Gb Maxtor (6L080M0) on first SATA controller
- Yamaha CRW-F1E and PIONNER DRV-105 optical drive on second IDE controller
- Win XP SP2

By "booting outside the case", you mean: extracting the motherboard from the case, putting it on a table, and trying to boot with only the mobo, the cpu, a new memory module, a simple video card, and the Sata HDD
I can try that but it' not easy... and the mobo is out of warranty
Don't you think that it could be a Sata Bios bug that appears only with this Maxtor hard drive model
As I've just bought this hard drive, I think that I'm going to exchange it for a Western Digital or a Seagate...

[VIA Series] PT880 NEO-FSR

Similar Messages

Maybe you are looking for