VIA USB Conflicts/Sharing in MSI PM8M-V

Hi
I take this week to find every new drivers for my almost new PC.
<<< System Summary >>>
MSI PM8M-V (MS-7104) Version : 1.00
VIA P4M800
Intel Celeron D 335J @ 2800 MHz
512 MB (1 x 512 DDR-SDRAM )
Ge Force FX 5200 [NV34.3]
WDC (80 GB)
SONY CD-RW CRX230EE
Network Card : VT82C570 MV IDE Controller VT6102
Rhine II Fast Ethernet Adapter
Microsoft Windows 2000 Professional 5.00.2195 Service Pack 4
Version 9.0c
I fin drivers from 2006 to many of this hardware except for the USB. Is a VIA USB Host Controller and the drivers has provided from Microsoft. when I go to the system information, in the Conflicts/Sharing I see 5 "IRQ 21 in the device "VIA
USB Host Controller".
I thin it's is because the all new drivers. The drivers for the USB 2.0 is from Windows 2000 service pack 4. Version 5.1.2600.1 from 2/15/2003. In the Device Manager I have 5 entries, one USB 2.0 Root Hub and four USB Root Hub. And other group of 5 entries one named VIA USB Enchanced Host Controller and the other four VIA USB Universal Host Controller.
Is normal this advice from the system information?
JR

Quote
Is normal this advice from the system information?
Yes, this is normal. Those usually share the same IRQ (21), because they are children of the same parent device.
If your USB works OK, I would leave it alone. If you ever have USB problems, you can try the latest VIA driver for USB2.0:
v270p October 2005

Similar Messages

Laserjet 1505 connected to AEB 802.11n via USB keeps timing out after print

I have a HP Laserjet 1505 connected on my AEB 802.11n via USB and shared on my network, on my network are two macs connected via wifi and 3 WinXP PC connected via wire. I have Bonjour and WinXP laserjet drivers installed on all Win PC. Everytime I print from any of the computers, it will print the first time, but when I try printing again from any of the machines, the macs and winxp pc's cannot detect the printer. When I go to airport utility, the printer cannot be detected anymore. I have to hard reset the AEB for it to detect the laserjet printer again. But the same thing happens again after I print out another document. Has anybody encountered this kind of problem. Can anyone help me resolve this?

Here is what I got from HP support :
The driver for the Laserjet P1006 is not available yet for Os 10.5...we are hoping it will be release in the next week or so...please click on the link below to sign up for an email update as soon as it is available..As a workaround, some people have been able to use the 10.4 driver from the cd, but this is not guaranteed to work in all applications therefore the only solution is to wait and install the 10.5 driver.
So we wait.
Yves

Problems with sharing internet connection via usb

I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
PS I have unliited cellular data and iPhone is my only internet connection at home,

Mark,
There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
If I remember correctly (book is on loan)
1: System Preferences>Network>Show>network port configurations (click unlock)
2: Click>Built in Firewire and drag to the top of the list (why I forget why)
3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
anyway play with it, you'll figure it out. if someone doesn't get to you.

Internet Sharing via USB 3G

Hi,
Since upgrading to Lion, I was unable to share my USB 3G internet connection via ethernet.
Sharing the USB 3G internet via Wi-Fi works fine though.
Any ideas?

Your carrier needs to support it and you need to subscribe to a tethering plan. Check this list for supported carriers and details on who supports the personal hotspot feature: http://support.apple.com/kb/ht1937

Internet Sharing: Palm Device can't find Internet via USB to Imac G5

None of the internet-using applications on my Palm Tungsten E handheld can find the internet, via a USB connection from the Palm to my Imac G5 and its high speed internet connection.
I have 3rd party software (The Missing Sync 5 from Mark/Space) that is supposed to enable a USB-connected Palm device to share an OS X Mac's internet connection. But I'm not getting beyond the Mac and I think either something on the Imac or perhaps my Linksys router is blocking internet communication to and from the Palm device.
Despite turning off the Mac's firewall and enabling internet sharing in the OS X prefs panes, neither my Palm's web browser nor its mail program can get through to the internet and all I get are communications errors.
I would greatly appreciate suggestions as to what to try next as I have done just about everything I can think of to try to get this Palm to access the internet via the Mac
IMAC G5 Mac OS X (10.4.5) 750 Mb RAM

Hello Adrian - thank you for your suggestions. The USB-connected PALM does NOT show up in The Imac's "Network Ports" - - and the only thing I could add, as a port, that was not already there, was something called "6 to 4" -whatever that is.
The Palm is supposed to be able to get its internet page requests out onto my router and DSL line via the Mac's ethernet port when: A) this Palm is connected to the Mac via USB and B) when the Internet sharing feature is enabled in a software app called - The Missing Sync, which it is, and when C) Internet Sharing is turned on in the Mac 'Sharing' pref. All these conditions are true, but sadly none of the internet apps on the Palm can find the internet .
I suspect a DNS issue - even though my router of course knows the DNS addresses of my ISP.
I should think that the PALM and the host Mac would have the same IP address - namely the one assigned via DHCP by my router when the Mac boots up.
Very frustrating....
I know nothing about Palms but I'll give it a
shot...
You say "Despite turning off the Mac's firewall and
enabling internet sharing in the OS X prefs panes",
are you seeing a USB option in the window? If so
select it.
If not try going to System Preferences>Network>Show:
Network Port Configurations. (This with the Palm
plugged in via USB).
Is it in that window? If it is tick it and go back to
internet sharing and select it in that window. (It
should have now appeared).
If it's not in System Preferences>Network>Show:
Network Port Configurations; select 'New', and click
'Port'. Does it appear in the drop-down list there?
If it does, select it, name it and click OK. (Note:
USB isn't a 'normal' option here but maybe your
Missing Sync will have added it..?)
That will take you back to the main Network Port
Config window where you tick it if it isn't already.
Then go back to Sharing>Internet to see if is
available there. If is is, tick it.
If it isn't, don't know. Sorry.
Have fun!
Adrian

Internet sharing via usb

I use my iphone as a modem and its been working until i got the new iphone 5.
Now, i can't use the phone as a modem via usb. My computer cant find the phone as a modem, but itunes and iphoto starts up as usual so theres nothing wrong with the usb-gate.
i can surf with wifi without problem, but dont like to do that because all the battery that goes away. I really like to be able to surf via usb.
whats wrong?
i tried to restart the phone and the computer several times.
sorry for the poor english :-P

Short answer: no.
It is possible via bluetooth using a piece of software called GnuBOX, but it is far from trivial to set up. And now that I think of it, GnuBOX was for S60v3 so I'm not sure it'll work on an S60v5 device such as the 5800.
Going WiFi will save you alot of trouble further down the line.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Internet Sharing via USB cable

I have a nokia lumia 720. I want to connect internet to my pc through my Phone via usb cable.
how can i connect internet via usb cable to my pc. My pc has no wifi connectivity.
Solved!
Go to Solution.

This feature is not currently available but you can certainly suggest it to Microsoft using the link below.
http://windowsphone.uservoice.com/forums/101801-feature-suggestions

Problems sharing media across network via USB of E4200

Wasn't sure where to post this.... I have been using the e4200 for about a week. So far, so good! However, a primary reason I purch it was the ability to share via USB across my network (Files and such). Read the approved USB drives that r compatible and although my specfic drive was not listed (WD, my Passport) I connected it to the e4200 and set a folder called "movies"to share. In this folder I have both bluray rips (25-32GB) and standard rips (5gb or less). Regardless of source, the content was not playable. It buffered like crazy. So, is it as simple as using an approved USB drive and I will be able to share appropriately?
The same folder plays great when connected directly to one of my media streamers USB drive, so don't think the drive/source is bad.
Thank you!

What is the capacity of the your WD HDD? The maximum HDD capacity supported by E4200 is 3TB. What is the hardware version of the device, also please mention the current firmware version of E4200.
You have mentioned that the media is not playable. Does it not play at all or it takes time to buffer and then play?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit. Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

I am connecting my iPhone 5 to my Windows computer via USB. This should open iTunes and start the sync process. Instead of iTunes opening, I get the iTunes service agreement to which I must agree. Then iTunes opens and begins to back up my phone. It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected. Hence the computer and the phone are not sharing information. When I select the functions I want to sync, I must either replace or merge. If I replace, I lose the information I recently put into my phone. If I choose to merge, then I have duplicates of everything.
How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
Thanks for any help!
Christine

After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
I've found that this fails with the error;
INFO: This tool works only on Windows Platform. Exiting the program
Which is strange considering this is Windows Server 2008 R2 64-bit
DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

How do I print from wifi-connected MacBook Pro to printer connected via USB to Win7 PC?

This is really frustrating, and I did not think that anything could be this difficult on a Mac. I have a Windows 7 Home Premium desktop PC connected via ethernet cable to wireless router, and a printer connected to the PC via USB. I recently bought my first ever Mac - a MacBook Pro, which is connected via wifi through the same router. All I want to do is to print files from the MacBook Pro on the printer connected to the PC. I have spent a LOT of time searching all over the web. Have tried some 2 or 3 different methods but none of them work for me, e.g. I shared the printer on the Win7 desktop and then added the printer on the MBP with the IP option with LPD/LPR Protocol, after enabling LPD Print Service on the PC. The printer gets added but when I give the command to print from the Mac, the print job shows up on the printer queue but the "Printing" soon changes to "Error Printing" (or something like that) and nothing gets printed. Then, I have to switch off the printer, remove the print job from the queue and switch on the printer again to get it out of the error state.
I also tried setting up the printer on the MBP using CUPS Admin interface, i.e. localhost:631. Again, printer gets added but document does not print. The third way I tried to add the printer was using the Windows option in the Add Printer dialog, and typing in an smb: URL but no luck with that, either.
Please, can anyone help me? This is driving me crazy
Oh, and the devices are:
1) Windows 7 Home Premium Desktop PC
2) MacBook Pro running OS X Mountain Lion
3) HP Deskjet F2110 printer
Thanks...
- Ajoy

First Install Bonjour for Windows on your Windows machine. This will allow the printer to be discovered.
http://support.apple.com/kb/DL999
Then use this article:
OS X Mountain Lion: Set up a printer shared by a Windows computer via SMB/CIFS

IOS devices not recognized in iTunes via USB

I am on a Windows 7 x64 home-built computer and I am pretty technically inclined, but this one problem has been bugging me for quite a while now.
I am pleased that Apple wants its devices to sync wirelessly with iTunes from now on, but there are times when it is necessary to plug in the device via USB, such as when transferring large files.
However, in the last few weeks/months, I have noticed that iTunes will not recognize my iPhone 4 nor my iPad 2 when they are plugged in via USB. The computer recognizes the devices, drivers are installed properly, and I can see the devices in Windows Explorer, getting photos off of them that way. However, iTunes does not show the devices with that "plugged in" icon next to them, only the usual sync/eject icon.
This is also a problem because sometimes iTunes just won't "see" the devices, but sometimes it will. Regardless, I need to be able to tether them sometimes for transferring relatively large files via USB. Wi-Fi just isn't fast enough. I suppose I may have to disable Wireless syncing altogether, but I fear that may not fix the problem, because it was syncing via USB just fine in the early weeks of iOS 5 and with wireless syncing enabled. I do have the latest iTunes, I do have the latest firmware for both devices, and I have rebooted both my computer and the devices several times lately, all without effect.
I've done all the simple solutions and none of them have worked. Can anyone explain what's going on and, more importantly, what I can do about it?

Yeah, I've tried 5 out of the 7 steps shown in their troubleshooter. The sixth step is one that is a major pain and I doubt would fix the problem: Reinstall iTunes. I know enough about PCs to feel about 80% confident that this step would not fix the issue. Plus, it's a major hassle with re-adding music to the collection. Nevertheless, I will look at it as a last ditch effort.
The seventh step is extremely vague and doesn't really help. "There might be a software conflict." Fine, but there's no way to find any such conflict, if one even exists in the first place, without a heavy dose of trial-and-error, several hours of time, dozens of reboots, and the patience of Job.
However, they do list some other steps that I'll try when I get home, such as making sure certain services are installed and running. I'll post my results here. Thanks, wiclee.

How can I share external devices connected to my Mac mini via USB on a wired network.

Own a Mac mini with Mountain Lion. Purchased the server app. The Mac mini is connected to a wired network with Mac’s and Windows machines. I have an external hard drive and 2 printers connected to the MAC mini via USB. I would like to share these devices with other computers on the wired network. Although I have attached similar devices with an airport extreme in the past, I am unable to use a wireless router in this case. Any suggestions on making this work with my current setup?

You don't really even need server app to do this. Simply go to System Preferences | Sharing and turn on both File & Printer sharing. Then, for example, the printer (not relevant what connection it has but obviously USB is fine) will be available to everyone on the wired network.
That's all there is to it - unless I missed/misunderstood something re: your setup which seems very straightforward.

IPod Touch 4th gen trouble connecting to my Win-Vista 64bit computer via USB.

Hi,
I seem to have an issue with my iPod Touch 4G. Ever since upgrading to iOS5.
The iPod Touch has had issues connecting, via direct USB, to my Windows Vista 64 bit computer. When I connect it, via USB, the computer will report the iPod Touch 4G as an "Unrecognized Device." This prevents me from using the USB to sync the iPod or charge it via the computer's USB connection.
My work around is to turn off the iPod (via red slide bar method) then connect it to the USB. At this point, it in it will automatically re-start the iPod and then it will recognize and sync or charge. I can also connect it have it report as an "Unrecognized Device" leave it connected, turn it off(red slide bar) and turn it back on and it will also connect charge and sync.
The problem is that I must turn it off every time I want to connect it. I can sync via wi-fi (but this causes issues with music that others have shared with me-keeps asking for their i-Tunes account) (happened after I "re-set" the I-Pod). I needed to hard sync with the computer to make all the rights work out.
This same USB cable and computer works just fine with my other iPods (Touch 3G, Classic) and my iPhone 4S. Only problem device is the Touch 4G. The problematic iPod and same USB cable works without issue on other computers (i.e.: don't have to turn it off and then plug it in).
I've followed the apple instructions and sequence to remove I-Tunes and a bunch of other related software and then reinstall it. I've reset my iPod. Nothing corrects this issue with this particular iPod. I've changed USB ports, tried other USB cables nothing changes the fact that I have to turn off and back on the iPod Touch 4G each time before I can get it to be properly recognized by the computer and thus charge or be recognized by iTunes.
This only started to happen to the iPod Touch 4G after I upgraded it from iOS4 to iOS5. I also have iOS5 on my iPhone 4S - with no issues. My other iPod Touch 3G is using iOS4. It connects and syncs fine.
I've figured out a work around but, does anyone know how to fix this issue? Thanks

Hi,
Yes, I have restored from Backup via i-Cloud. I've restored the iPod to factory settings. It seem like there is a driver issue. I installed iOS 5.01 and updated iTunes to 10.5.3.3 at about the same time. Win-Vista64, iTunes and iPod are all up to date. Apple Genius, at local Apple store was also perplexed. He suggested I ask the community. So, here I am.
It is strange that I can connect to other computers. But, the other computers have Win 7. Could this be a Vista64 driver issue?

Can't use correct driver for Canon MF4140 USB printer shared by Windows XP

Hi all,
I have a Canon MF4140 printer connected to my Windows XP desktop machine via USB. The printer is shared and I can see it over the network with my MacBook running OS-X 10.4.
I've downloaded the OS-X version of the printer driver from Canon, but I can't select it when adding the printer in OS-X, so I can't access any of the printer settings. I've selected the generic driver but that doesn't allow me to do double sided or 2-up printing.
Is this because the printer driver does not support network printing, as the printer doesn't have a network interface?

I guess this isn't clear on the iFelix page. To use any of the built-in network printing protocols on OS X, you must either have a postscript printer (postscript printers don't require a driver, just a PPD), or a driver that works with the CUPS system (a CUPS driver). So far, Brother is the only non-postscript printer manufacturer that provides CUPS drivers. For every other non-postscript printer, you need a third-party CUPS driver. Apple tried to get around this issue by including Gimp-Print drivers (open source CUPS drivers), but your model isn't in Gimp-Print. You can look around for other CUPS drivers, but Lexmark hasn't been cooperative with driver writers. Here are the CUPS driver sources:
http://www.linuxprinting.org/macosx/
http://www.easysw.com/printpro/
http://www.printfab.net/
You may find it easier to share from OS X.

VIA USB Conflicts/Sharing in MSI PM8M-V

Similar Messages

Maybe you are looking for