Vibe on same server as GW2012

I have a single server setup
Server: Quadcore, 8Gb RAM
I need to seriously look at Vibe for Document Management
Anyone using Vibe with Groupwise?

Brian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Forward to different web-app on same server

I can forward a request from a servlet to another web-app on same server, but the authenticated principal is not propagated from original servlet to forwarded servlet. I'm using the requestDispatcher.forward(req,resp) method. It seems that if you forward to a web-app within same EAR or server than the user's identifty should be propagated.

With tomcat you can use single sign on .
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/config/host.html#Single%20Sign%20On
regards Dietmar

Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

Hi All,
I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
lessage. But When I try to install SharePoint 2013. I am getting the following error:
trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
I am unable to find solution for this issue. what is the solution for this?
Thanks in Advance..
Prem Kumar

To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Move file from App server to same server on different path

Hi All,
I have to move a file from Application server to a folder in the same server....
pls tell me how can i do this....
its very urgent....
Thanks...............

Hi
First you read the file in output mode using Open dataset and Read dataset statement with the initial application server path.
Then write this data back to another file path by opening the file in Input mode and using Transfer statement.
Example.
open dataset <file1> mode output encding default.
if sy-subrc = 0.
do.
read dataset <file1> into wa_itab.
if sy-subrc = 0.
append wa_itab to itab.
else.
exit.
endif.
enddo.
open dataset <file2> mode input encding default.
if sy-subrc = 0.
loop at itab into wa_itab.
transfer wa_itab to <file2>.
endloop.
endif.
~ Ranganath
PS : Reward points for all useful answers !

How can I migrate file shares & permissions from one volume to another on the same server?

I am replacing a storage array and as part of that process, I need to move files/folders and Shares/permissions from one Volume to another volume within the same server.
The server is Windows 2003 file server. The file transfers are not a problem, moving all 40 shares with permissions etc. is my main concern because in order to maintain everything I need to change the drive letter of the new volume to match the old
one so that links to various resources throughout the network do not break.

Hi,
If you want to copy files/folders from one Volume to another volume within the same server, you could use the File Server Migration Tool (FSMT) or Robocopy to accomplish your goals. The tool can move all of the files from the shares on your original volume
to the new volume.
For more detailed information, you could refer to the articles below:
File Server Migration Toolkit
http://technet.microsoft.com/en-us/magazine/2006.10.utilityspotlight.aspx
The File Server Migration Toolkit (FSMT) is a free download available at:
http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
FSMT and Robocopy will not copy Share permissions but only NTFS permissions. So if the drive letter will not be changed, you can backup and restore the Share permission with steps here:
Saving and restoring existing Windows shares
http://support.microsoft.com/kb/125996
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Access to different application in same server

Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services

Only the classfiles of any user-defined classes/interfaces that are possibly used
as parameters or return values from the methods in the home/remote interfaces. If
you aren't doing that, then the home and remote interfaces is all you need.
Bill
Perry Hoekstra wrote:
[email protected] wrote:
Hrm. It's no different from accessing EJB's deployed in the same application
(EAR) except that local calls are no longer possible.
Perry Hoekstra <[email protected]> wrote:
Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services--
DimitriI should have explained myself better. I was thinking more from a
packaging point of view. Beside the remote and home interfaces of the
called bean, are there any other files necessary to be packaged with the
calling bean ejb.jar?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services
[email protected]

Different logon pages for same server.

hi Expert,
I have created two different logon pages with different URL's for the same server, now i can use both the pages to logon in to the system.
what i need to do now is :-
URL "A" users set ="A"
URL "B" users set ="B"
If we have the above two different URL and respective users for those URLs.
Now if i am User from the User set "A" and try to Login by using URL "B".
I am able to login, but i want to restrict.
ie.
users from set ="A" login only by the link URL "A"
users from set ="B" login only by the link URL "B"
Points would be given to helpful answers.
Regards,
Sanjyoti.

Hi Sanjyoti,
I am not sure if this would work, but if time permits then do try this.
User A -- URL A
User B -- URL B
Now make User A a part of Group A, and set conditions in code that Group A can logon only through URL A and User B can logon through URL B.
Then in code check the association user - group and group - url and accordingly allow / disallow the user to go ahead.
This is just a thought.....do tell me if this works.....or if it doesnt then do post the solution you use....
Thanks,
GLM
P.S: PLEASE CLOSE THE THREAD IF THE ISSUE HAS BEEN RESOLVED
Edited by: GLM on Aug 27, 2008 2:08 PM

Activating MS Office 2013 ProPlus via KMS running on the same server

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

XI and R/3 Running on the same Server.

Hello Friends!
One year ago I've installed XI on a machine that already had a R/3 instance. Although there were different instances, one for SAP R/3 and one instance for the ABAP part of XI, I couldn't get to connect XI to the R/3, appartently XI searched for the instance through the IP address, ignoring the instance ID parameter.
Now I have again the same challenge, I have only one machine to run R/3 and XI.
Does anyone know if it is possible to do?

Hi Tadeo,
from ERP 2004 you can install XI on the same server.
Regards,
Udo

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

Can different cluster of SAP Business One installed on the same Server

Hi!
Can anyone tell me if B1 different cluster version installed and run on the same server. Example B1 2005A AND B1 2005B. If it can, could you please include the procedure how can it be done.
Thanks,
Jo Borlagdan

No, A and B have different patch cycles - so there would be conflicts in SBO-Common. Therefore it will not work.
You could try to workaround that with named instances of MSSQL, but installation & update would need additional care + workarounds.
The best way to combine 2 SAP Business One cluster "servers" but still on one hardware would be to use a tool like VMWare... - but such a configuration has not been released by SAP - i.e. if there's an issue that could be traced back to the VMWare system, SAP might not be (li?)able to fix it
Sorry,
Frank
Message was edited by: Frank Moebius
BTW: Please note that you need to think eventually about conflicts with MS licenses. SAP has an agreement with MS which ASFAIK covers the license for 1 VMWare Windows system on 1 Windows PC so that we can use WMWare for SAP Business One sandbox systems - after RAM upgrades () it works fine...

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

How to deploy a Webapplication on WAS more than one times on same server?

Hi all,
I 've a special problem:
In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
But in the second application there it's recommended to change some properties.
How we can handle this in JDI without copy the web-application?
I hope my question can be understood.
Best Regards
Sven Rickelt
Using Netweaver + WAS 6.40 2004 SP 13

Hi Sven,
as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
Best regards,
Frank

How to make Adobe acrobat feature to convert SAP Pages to PDF available for multiple users connected to the same server

We have installed Adobe Acrobat X Pro- English,Francais,Deutsch version 10.1.9 in our test environment and tried testing it for converting SAP pages into PDF with a few pilot users. In doing so we faced a challenge, where only one user at a time can use Adobe Acrobat PRO to convert SAP pages in to PDF.As long as the first user who is connected to Adobe Acrobat Pro via SAP isn’t logged off, other users connected to the same server are not being able to get the “Save As” dialog box to save the PDF in their preferred location.
This is a business requirement and we need an urgent solution for the same. Can anyone help us in telling us if this is possible and if yes the how to go about?

It's not something we deal with here, the LiveCycle products are a different world. Key points: Adobe LiveCycle is a range of products, some desktop, some server. LiveCycle PDF Generator is the one you should look at, it comes in 3 editions. License terms are by negotiation. Key management is via its Java API.

Multiple users connected to the same server

Hi there,
I was wondering if this scenario would be possible to be implemented on a Snow Leopard Server installed on Mac Mini 2.66:
- one iphone developer that needs to be remotely connected to the server to develop apps
- one project manager that will handle the project files and documentation. He will login to the server and upload/download files
- one app GUI designer that will login from time to time, to make the design in photoshop.
Can these 3 users be logged in the same time on the same server without any lag? Or this version of server will only support one user at a time?
Thank you!

Yes, you can do ssh and terminal connections, but I'm guessing that's not what you want here; I'm guessing you're headed over from X Windows or (more likely) Windows Terminal Services.
Google for Aqua Connect and related for the path that you're headed toward.
In general, Apple Mac OS X and Mac OS X Server runs one seat and one keyboard and one display per station, whether it's an Xserve server or a MacBook or whatever.

Vibe on same server as GW2012

Similar Messages

Maybe you are looking for