Vibe Z2 Pro vs. Vibe Z2: Confusion

Z2 Pro and Z2 Confusion
Every store and new user I speak to gets confused between Z2 Pro (6 inch) and Z2 (5.5 inch). Most people don't know this are two different phones. And they run two different versions of Vibe UI. These phone could no be more different (screen, camera, vibe ui, processor).
When I google in internet "Review Vibe Z2" all I get in results is reviews for "Vibe Z2 Pro". When I ask for a cover for Vibe Z2 they want to sell me a cover for Vibe Z2 Pro. Would be better to call this Vibe Y2 to get the entire XYZ alphabet going and avoid confusion.
Stock android only on Z2 Pro
I think the stock android only runs on the Vibe Z2 Pro, I could not run it on Vibe Z2. I would suggest for your other teams to enable stock android on Vibe Z2 and Vibe X2 as well. The Vibe Z2 Pro got great reviews for this, and this would just increase the demand for Lenovo further.
I still prefer to use Vibe UI, although I would prefer to user my own icon library, but having the stock android option increases the value of the phone (almost doubles the value). Anyway, you can't avoid users getting another launcher, so just enabling stock android, would get you several extra customers at no harm.

Hi
Can you tell me your firmware build number?Settings->About phone->Version information->Software version number?
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Unable to capture video from canon xha1s to final cut pro 6.0. so confused

hi,
i purchased a canon xha1s and am simply trying to capture the video onto my macbook pro laptop. i keep getting the error saying my settings are incorrect and am confused as what to put and where. i went to the video/audio settings and put what i believed to be correct (HDV) since my camcorder records in HDV. still that error window pops up when i try to log and capture footage.
any help would be greatly appreciated!

Hi .. I had a very similar problem .. if the above fails it may be worth a look at this too..
http://discussions.apple.com/message.jspa?messageID=10804559#10804559
Jim

MSO PRO-E 7522 BIOS confusion and persistent BSoD

Hi there
A few months ago I switched from 775 to 1366.
Components changed:
CPU (from Q9550 to i7 950)
MOBO (from Asus P5QL PRO to MSI PRO-E
RAM (From 8gb 800Mhz DDR2 to 12GB 1333Mhz DDR3 ADATA)
PSU (from Antec 550W to Cooler Master Ultimate 900W
+1 GFX card (Another ATI XfX 5870 Black Ed.)
I did not overclock the old system and I haven't overclocked my current system.
Now the thing is, I've been having bluescreens ever since I got that MSI PRO-E.
I've tried: switching RAM (since it said 1 was faulty), switched harddrives, reinstalled windows +/-6 times and looking for driver updates.
Now finaly I went looking at the BIOS.
Since I got a new PRO-E I remembered that I had no idea what version of the BIOS was running.
It seems that currently version 8.C0 is running.
Now I need to know if it matters that I've got the 8.xx BIOS version while running a crossfire setup.
Because I've read this:
Version 7.xx (7.3 is supposed to be the latest) supports Crossfire
Version 8.xx (8.E is supposed to be the latest) supports SLI.
Now I understand that 7.3 won't support SLI, only crossfire.
But does version 8.xx support both SLI AND Crossfire? Or am I simple messing up my computer because I've got a wrong BIOS version?
BSoD info:
problem continues to be caused by: ntkrnlmp.exe I think.
Well the first blue screen does not:
Loading Dump File [C:\Windows\Minidump\010711-24296-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a54000 PsLoadedModuleList = 0xfffff800`02c91e50
Debug session time: Fri Jan 7 08:06:29.587 2011 (UTC + 1:00)
System Uptime: 0 days 0:29:44.806
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff880048e3817, fffff88006ffd8e0, 0}
Probably caused by : atikmdag.sys ( atikmdag+90817 )
Followup: MachineOwner
Second blue screen:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\010711-22531-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a0d000 PsLoadedModuleList = 0xfffff800`02c4ae50
Debug session time: Fri Jan 7 08:36:18.533 2011 (UTC + 1:00)
System Uptime: 0 days 0:28:46.626
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {41790, fffffa8000496e00, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339d6 )
Followup: MachineOwner
I have also tried: registry cleaner countless times. though it sometimes did find stuff I don't think anything could relate to some shortcut which the program thought to be useless but was actualy referring to the windows debugging program. And even without regsitry faults (being detected) it crashed.
So I just need to knowL could it be my BIOS version + Crossfire = blue screen
If not.. any idea's?
Details system info:
OS: Microsoft Windows 7 Ultimate x64 (Tried with and without updates and service pak, these bluescreens are from this morning while I was @ school.
CPU: i7 950
Mobo: MSI PRO-E 7522
RAM: 12 GB ADATA 1333 DDR3 (listed as supported)
Graphics Cards:
ATI XfX 5870 Black Ed. 1GB.
ATI XfX 5870 6 Eyefinity Black Ed. 2 GB (as main card)
(I know, not an ideal combination but the 1gb card will be replaced)
2x 1TB Samsung Hard drives
PSU: Cooler Master 900-1080W
Casing: Cooler Master HAF922
System @ stock speed, I do not overclock!

Quote
Ah, ok so its already running at 1066?
Yes.
Quote
CPU-Z showed 530.5
CPU-Z always shows the real frequency. Because of the DDR architecture (Double Data Rate) there are two transactions per clock cycle. That means 530.5 MHz effectively translates to 530.5 x 2 = DDR3-1061 [~DDR3-1066]. The small difference (DDR3-1061 vs. DDR3-1066) can have two causes: The Base Clock Speed is either not set to 133 MHz in BIOS Setup and/or Spread Spectrum in Enabled and causes small clock speed deviations.
Quote
Then what would you have me do now?
Leave the memory frequency setting @DDR3-1066. It is better for testing anyway. You can worry about that later. The only thing you may want to check is the Base Clock speed (make sure it is set to 133 MHz in BIOS) and the Spread Spectrum setting (disable it).

I just got an external hard drive and did my first backup of my total MacBook Pro. In my confusion I thought I could drag a particular item to the hard drive icon on my desktop.

I had my most frequently used documents in Documents folder in the Dock. I thought I'd just drag it to the external hard drive, which I did, but then it was gone from the dock and I haven't had any luck putting it back. Somehow the applications folder has also disappeared! Can someone please tell me explicitly how to get documents and application folders back on the dock.

Thank you - I had tried to do this but it didn't work. What I finally found that worked was that on the desktop I right clicked and then selected "new folder". I named it documents (then did the same for applications) and dragged those folders from the desktop to the dock, and am in the process of dragging the documents and applicatons from their original folders into the new ones - it seems to be working fine.
I have no idea why it didn't work as you suggested - I tried several times with no luck, I even took a few unused icons off the dock in case there was not enough room.
So hopefully one of our solutions will help someone else. Thanks again.

Premiere Pro CS4 - editing video from GoPro video camera

I am having a problem trying to edit video from the GoPro camera in Premiere Pro CS4 (PP). Have not been able to get much help from GoPro - they just tell me to speak with Adobe. I think the video codec used by the camera is MJPEG (?). It won't play at all on the timeline. Interestingly it will in After Effects (AE) CS4 and if I export it out of AE as a Microsoft AVI file I can then play it in PP. However if I go straight to Media Encoder and import the clip and then try export the clip via ME as a Microsoft AVI the exported clip from ME won't play in Premiere Pro. I am confused. Does anyone know this camera, it's codec and why it just won't work when directly imported into Premiere Pro but it will when imported directly into After Effects. Any advise would be greatly appreciated.

Please see a post I made this morning under my screen name BruceERoberts .... details below
I just purchase Adobe Premiere Pro a few days ago - and subsequently updated it to Ver 4.2.1. A started a new project - I tried to import some video footage I just shot with a GOPro Hemet Cam while skiing at our local mountain. I can easlily see the clip using Real Media Player - or the Quick Time player. It is a 10.9 MB ... 7 second MPEG-4 movie clip. File name is "gopro0030.mp4"
I created a "bin" called video .... then right clicked to import the file. You can see the file name in the media browser. But the file would not import. I received this error message: "109C ImporterProcessServer.exe Application Error. The instruction at "0x05efcac" referenced memory at "0x00000014". The memory could not be read. CLick OK to terminate."
This is very frustrating - I just purchased the software - and it won't import a 7 second video clip! It did import still fotos with no problem. What can I do?
thank you for your attention to this.
Bruce Roberts, Vernon B.C.
March 14th 2010
System Info
MS Windows XP
Version 2002 SP3
Dell Dimension XPS
Pentium 4 CPU 3.4 Ghs
3.39 Ghz 3.00 GB of RAM

Would I still be able to fun Final Cut Pro with no problem with the new 13"

My old MBP has "NVIDIA GeForce 860M GT with 128MB" and the new 13-inch MBP has "NVIDIA GeForce 9400M graphics" I don't really know what "GT" means, but the more expensive MBP's listed have it, so I'm guessing it's pretty good. I was wondering if I'd still be able to fun Final Cut Pro quickly if I got the new 13-inch MBP.
Back in 2007, the guy at the Apple store said I'd have to get a MBP instead of a MB if I wanted to fun FCP correctly, and now both the MB and MBP use the same graphics chip, so I'm wondering if FCP will still function correctly on the new 13-inch MBP?

Eric wrote:
Incorrect about what? I never made any statements, just questions. According to the Apple store, the Macbook and 13-inch Macbook Pro both use the same chip, which is the only statement I made. And which is why I'm wondering if the new 13-inch MBP can even handle FCP since the MB can't (according to the guy in the Apple store).
Actually, your original question was formed as part of a statement:
now both the MB and MBP use the same graphics chip, so I'm wondering if FCP will still function >correctly on the new 13-inch MBP?
And that's the part that BoyHowdy pointed out that you are "a little incorrect" about. While it's true that they both have an onboard 9400M graphics chip, you are overlooking the fact that the 15" & 17" MBPs also have the much more powerful and dedicated 9600M GT graphics card. This is not an insignificant difference. Final Cut Pro, not to be confused with Final Cut Express (not you, others have confused the two), requires a dedicated card which the 15" & 17" MBPs have in the form of the additional 9600M GT, but the 13" still lacks.
The specs on the Final Cut Pro page are a little confusing because while it says it *will not work* with integrated graphics, it specifically refers to Intel, and does not mention Nvidia. However, it still says it requires an AGP or PCI Express card, which the 9400M is not.
My feeling is that even if it runs, the performance of Final Cut Pro on that system will be unacceptable, and will ultimately drive you mad. It really pushes the graphics systems hard, and despite their vast improvement over the pathetic Intel onboard graphics systems, the 9400M is still pretty anemic for high end work. You're better off saving a little more money and getting the low end 15" model. Not to mention, the extra screen real estate makes a huge difference with the very crowded Final Cut Pro UI.

Windows Vista 64 bit w/older 2 dual core 3.0ghz Mac Pro with NVIDIA 7300

I have read a variety of the posts that have appeared here on the use of Windows Vista 64 bits on a Mac Pro. I remain confused, and but want to do this. I have a Mac Pro purchased in the Spring of '07 with dual 3.0Ghz dual core Xeon cpus and 10gb of ram, using the NVIDIA GeForce 7300 GT and running 10.5.1, with multiple drives. I want to run the 64 bit version of Vista Ultimate to use my ram, and to gain the performance this box should offer. It appears that I have three options:
1. Boot Camp: I don't know if the drivers are available, seems like the new Mac Pro drivers probably would not work, even if I could find them, since I have an older Mac Pro with a pair of the dual core Xeon CPUs. Don't know if there is an alternate source than Apple for the drivers, or a way to get around the problem in boot camp.
2. Parallels: I do not believe that 64 bit apps are supported by Parallels
3. Fusion: Their web site says they support Win Vista 64 bit, but it is not clear to me on the web site where the drivers are obtained, or perhaps they are built in to Fusion. Will I get the performance and memory benefits in fusion? Or is the OSX virtual overhead so high that this is a fools errand?
I do a lot of video editing, and fully 95% of my life is in the Mac world, but I have individuals who send files for editing, and occasionally they require Windows tools, much to my chagrin. I also have a small number of programs that need Windows 64. I occasionally am required to do some development work, and would like to use this machine for that purpose if it can indeed run Win Vista 64bit. I have XP loaded on a more modest box andit is running fine when I need it, which isn't very often.
Any help, or successful experience in running Windows Ultimate 64 bit on this hardware, utilizing its resources would be greatly appreciated.

Here are my results after further digging online and from my own experience.
Here is the procedure:
1. Check whether your Mac has the 32-bit EFI or 64-bit EFI
http://www.ihackintosh.com/2009/08/snow-leopard-106-and-64-bit-what-you-need-to- know/
2. Create a Boot Camp (BC) partition for Windows 7 x64. Resize the partition size using the slider in the BC app. Follow the instruction, insert the Windows 7 disk and reboot.
3. This will load the PC partition which is FAT formatted for now. Choose the Boot Camp partition on which to install Win 7, but choose in the option to format that partition. It will automatically format it in NTFS. Otherwise, it will not install on that partition.
Note : A "OEM System Builder" Windows 7 64-bit Professional UPGRADE install without any issues what so ever. The upgrade disk is a full install. Read this for further information:
http://www.pcworld.com/article/174288/windows7_upgrade_madecheaper.html
4. Run windows, then insert the Snow Leopard disk. It will tell you your hardware cannot support x64 version. Do the following procedure to manually install the driver:
http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22%3Aq boot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7%3Ahow-to&l ang=en
5. Then update Boot camp using Apple Software Update in Windows.
6. All hardware works fine except the sound. The sound only comes out of the internal speaker, even when headphone or speakers are plugged in the jack. Installing the Realtek High Definition Audio Codecs driver in order to fixe the problem. Shutdown and reboot to make it applicable. Try a second time if it still does not work:
http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
That's it.

I want to find out how much memory is left on my macbook pro. I need to know steps to find this out.

I had a problem today as my computer would not save a file for me. A box stated macintosh HD was full and I would need to clear some files to make room. I realized that although I had deleted emails from mac mail, gmail had not deleted these and all still remained on my macbook pro. I went to gmail and finally deleted all the emails, and there were thousands. I have been able to save a file as of now but want to know how much memory exists on my macbook pro. It is confusing when I go to the Apple icon in the upper left corner of my laptop as that states my computer has 4gb of memory, two in each slot. It does not tell me how much as been used. Any help with this issue is greatly appreciated. M.

The bottom of a Finder window will show you how much HD space you have left.

Importing Component Video to MacBook Pro

Hi All,
I have a satellite receiver with a Y Pb Pr output and an HDMI output. I've recorded a few programs that I would like to transfer to my MacBook Pro. I'm confused by the available cables. Can someone tell me what cable I need and the procedure to import video programming into my MacBook Pro?
Thanks,
kayjh

Actually, after doing a bit more reading, I find that DVI doesn't carry audio (and sounds like it is an output from the port on my computer, not an input), so I'm back to square one. Anyone have success transferring digital content from a PVR to their Mac? there must be a simple way (??)

Need expert advice on buying new macbook pro 15 inch

Hi I Am a digital textile designer and planning to buy my first retina macbook pro. I need expert advice, which model should i buy 15 inch base model or with dedicated graphics card. i will use macbook for digital designing on Adobe photoshop and multi tasking. so now really confused is intel iris pro graphics will handle heavy files on photoshop or Nvidia GT750 m will good for heavy work. I am working on very large resolution file like 10 to 15k in resolution approx 1 GB in file size with lot of filters is being use while designing. Which model will handle above task well and last longer.

Look at the specifications here:
http://store.apple.com/us/buy-mac/macbook-pro
You may be confusing the quad core CPU with the Graphics processor.
It should have no difficulty in running Adobe Photoshop.
Ciao.

Photoshop performance on new Mac Pro Nehalem

If my current comparison is a dual quad core 2.66GHz "old" Mac Pro, and want new "Nehalem" Mac Pro, where Photoshop performs equally.
Should I get a 2.66 Quad Core Mac Pro (given I accept the 8 GB RAM limit)?
Should I get a 2.26 Dual Quad Core Mac Pro?
Where is Adobe going in the optimizations of Photoshop application and filters?
Will optimizations be done for CS4, CS5, or even later?
Please show me the path.
Søren

Correct
not acceptable.
Phil-
Of course any 4-core Mac Pro with 8 GB RAM and appropriate graphics card will run any version of Photoshop very well, but you miss the point.
"just buy the most machine you can afford" is actually quite complicated.
The point is that we have
multiple Mac Pro computer investment
choices
and prices to choose among:
boxes from 2006, 2007, 2008 and 2009 with various graphics cards and other architectural parameters to consider when choosing the "best" one for any given workflow and financial situation.
With 11 Mac Pros (further complicated by confusing graphics cards combinations) it behooves us to quickly remove what may be
unacceptable investment choices from consideration. The one box of 11 that limits RAM to 8 GB is - IMO - easily identified as "unacceptable" and removed from consideration.
Moving forward :) as app vendors evolve apps to better utilize available cheap RAM, OS 10.6 and boxes with more RAM access (like all the other Mac Pros ever made) ever-larger amounts of
cheap RAM will become more useful. E.g. I paid US$450 to upgrade my 2007 Macbook Pro from 2 GB to 3 GB, and it was worth it. Today that much money will put 24 GB in a MP, and RAM prices continue to fall.
Under OS X Photoshop can already take advantage of at least 32 GB installed RAM. We do not know what 64-bit Mac PS will bring us in a year or so, but odds are pretty high that having lots of RAM available will be very desirable. IMO buying a 4-year-lifecycle pro tower in 2009 that is constrained to 8 GB RAM would be a poor purchase decision.
All the above comments assume heavy graphics app usage like CS3/4/5.
-Allen
P.S.
We agree about the new Mini. Even with its limited RAM (and consequent shortened life cycle) the low price makes it a viable choice for less than the heaviest graphics work.
The new Mini IMO is the sleeper of the new Macs. iMacs are hamstrung by their glossy displays intolerable to many (not all) graphics pros but the Minis are not. Running OS 10.6 with FW 800 connectivity, 9400M graphics, 4 GB DDR3 RAM and third-party displays a Mini can now actually drive a desktop Aperture or Photoshop workflow (although obviously not like a 4x-the-price MP would drive such apps) at a very cheap price.

How can i save a sequence into a folder in premiere pro cc

How can i save a sequence into a folder in premiere pro cc

Your question is confusing. It could mean a few different things.
A. If you just want to have the sequence in a particular bin in the Project panel, then drag it there.
B. If you mean you want to save a sequence so that all of the necessary files are in one folder on your hard drive, simply create a new project and import the sequence into your new project. Then use the Project Manager to gather all of your files together.

Can't load XI Pro from CC, only DC available

Pardon me if I'm a little behind, I'm new to CC. I have CC loaded on 2 desktops, both windows 8.1. A couple of weeks ago Acrobat XI Pro was removed and DC installed on ONE of these
desktops (set for auto update). The other desktop was not changed and still has XI Pro loaded. The confusing part is on BOTH desktops while in CC the app for Acrobat XI Pro is not
available otherwise I would simply reload it on the affected machine. Did DC replace XI Pro? I much prefer XI Pro, I'm used to it and it serves my office needs fine. Thanks for any help.

Hi Melinda,
Yes, you are correct. Once upgrade to Adobe Acrobat DC your Acrobat XI pro gets removed.
However if you still want to uninstall Acrobat DC and re-install Acrobat XI Pro please refer to this link for the solution Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI back.
Let me know if you experience any issue, we will be happy to help you.
Regards,
Aadesh

Needing help with Adobe Premiere Pro

Yes, I know it is ancient but I still use it. I use it for my school's daily news broadcast. We capture our students as if they are presenting a live news program and then assemble in the timeline. We use a miniDV camcorder and firewire. Once we have all of the elements in the timeline, we then are able to play the timeline via the firewire (hooked to the camcorder) through the play/edit mode through a VCR out via coaxial cable to all of the classrooms in our school.
My current problem is that I encountered an error while creating a movie. I have a preset that saves versions every 3 minutes. I tried opening each of them but it just keeps saying it's loading but that is it...nothing ever comes on the screen. I moved a title slide (in a folder outside of the project folder destination) right before I had decided to make the movie. I did get one version to open---finally but thought...well, let's try a later one...so I don't have to "recreate" everything I had just done....then none of them would open...not even the one I got open.
Also, if anyone has any suggestions on a different way to do what I am doing using newer technology...please share.
Finally, is there updates that maybe I need to download or something to continue to be able to use Premiere Pro???
Please share any and all suggestions...desperate in Missouri

John,
Take a trip in the WABAC Machine.
Now, I could be wrong, but when the OP said "Yes, I know it is ancient but I still use it." I assume they meant the original version. The one without a number. The one some people called Premiere Pro 7, or Premiere 7. Or whatever. The one right after Premiere 6.
I remember having to go through the numbering explanation in my tutorials on Premiere Pro 1.5 since confusion reigned. You can still watch the introductory video and get my explanation starting around the 40 second mark.
But, as I said, I could have it wrong. They might have a different version.

Update Premiere Pro CC or Premiere Pro CC (2014)

This morning I go to install updates, but there are now two versions of Premiere Pro CC. I selected the Premiere Pro CC (2014) and it installed a whole new version of Premiere Pro CC on my computer. Can I still work on my projects using the new (2014) version without any issues? Or should I uninstall it and just update the regular Premiere Pro CC version? Confused!!

Keep both versions. It's up to you if you want to experiment with current projects in the new version. I haven't had any issues yet in my very limited testing.

Vibe Z2 Pro vs. Vibe Z2: Confusion

Similar Messages

Maybe you are looking for