Viber call doesn't work

i have installed viber on my xperia sp phone about 20 times and it does not work properly
the sound is muted randomly
ocasionally it works good

Contact the app developers.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Video call doesn't work on iphone 6 iOS 8.1.3

I have a iphone 6 with iOS 8.1.3, updated skype to version 5.10, all functions works fine but video call. the icon of video call doesn't respond (it stays blue when you click it), camera was turned on in setting also under privacy, I can use camera to take my photo for screen photo, that means the camera was setting correctly, but only video call doesn't work, can anyone help? Thanks a lot in advance.

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Cassette Tape Call Doesn't Work

So I have a Monster Cassette adapter I use for my car. I had it for my 3G.
The mp3 works fine, but the calls doesn't. Before the 4.0 update, it was fine. I can use it like a bluetooth.
Is anyone else having this issue?
Thanks in advance!

Not sure the sip message flow and callmanager trace, but here is some general idea.
Did the ccm send 180/183, if it has sent to outside caller's service provider, the service provider is responsible to provide the ringback tone except they require in-band ringback tone via PRACK.

On Yosemite outgoing calls doesn't works

Hi there,
I have and MacBook Pro (Retina, 15-inch, Early 2013) OS X Yosemite (10.10) and iPhone 4S iOS 8.0.2
Actually I can receive a call on my Mac and it work very good but when I try to make a call from my Mac it doesn't work. I see the advice: "...you have to use the same iCloud account..."
What could be?
Thanks!

In addition to what Greg suggested, you also need to check the option "Use ext. ph number mask " option under route patterns or under each individual route list - > set the Ext ph number mask to On.
You can find detailed steps here.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmcfg/index.htm
With CME, you can use dialplan patterns. HEre is a good link
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a7fe1.html
HTh
Sankar
PS: please remember to rate posts!

IPhone 4 calling doesn't work

Hey I just bought a used iPhone 4 the calling won't work like the time runs but not saying connected, or no sound at all coming out of ear peice or head phones I don't know what the problem is I got the earpiece replaced and nothing please help

Hey rajeshsubbiya,
That definitely sounds frustrating, the following articles may provide more help in isolating this issue.
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks,
Matt M.

IChat video call doesn't work.

When I try to video call, it doesn't go through. It says it is starting the call but on the other person's screen it still says waiting. Why doesn't iChat video work?

Hi,
Version of iChat ?
To which Version of iChat ?
Countries involved ?
If within the United States which parts (you will have to tell me North, South, East or West as State names don't really mean anything to me.
Internet Providers ?
10:51 PM Monday; August 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Asynchronous web service call doesn't work

Hi,
I'm trying to convert a synchronous web service call into an asynchronous call. (Folder-level Javascript, Acrobat Professional 8.1, Windows XP).
Everything works fine when I call Soap.Request as a synchronous call. It calls the web service and gets the expected result. However, when I try to convert Soap.Request into an asynchronous call by adding the OAsync property, as described on pp. 198-199 of "Developing Acrobat Applications Using JavaScript," NONE of the various OAsync functions (i.e. result, response, wait) are ever called. IOW, the Javascript code continues executing after the Soap.Request call and doesn't wait for my web service call to return. Indeed, the web service method on the server doesn't even BEGIN to execute by the time the Javascript code runs to completion. (I can confirm this by watching my ASP.Net code execute in the Visual Studio debugger. In fact, the Javascript code runs to completion even before the Global.asax Session_Start code begins to execute, much less the web service method itself.) So, the problem is not with the web service, which works fine when Soap.Request is called as a synchronous method.
To reiterate, my Javascript code is identical to the code on pp. 198-199 of "Developing Acrobat Applications Using JavaScript." In troubleshooting this, I've tried calling the OAsync functions (mySync.wait(), mySync.result(), mySync.response()) after calling the Soap.Request, but nothing works.
Is there something else that I must add to my Javascript code (e.g. an additional Soap.Request property, or something after calling Soap.Request) to force the Javascript to wait until the web service method returns?
Thanks,
Bill

Hi Lukasz,
you can also define namespace the later in the operation GetOpenOrders itself, e.g.:
<tem:GetOpenOrders xmlns:tem=u201Dhttp://tempuri.org/u201D>
It does not need to be part of the Envelope element.
Best regards
Bastian

Webservice invoke call doesn't work

I'm invoking a webservice with axis, and it isn't working ok. It seems as if it's making something, but at the end it doesn't return anything. After executing all necessary methods (addParameter, setReturnType,setOperationName...) i execute invoke method and it stands working but doesn't return anything and execution doesn't finalize (i'm executing it in eclipse). I debugged it, and it worked fine, so i made a Thread.sleep() of 4 or 5 seconds before executing invoke method, and it works ok! I don't understand this behaviour, because if the code is being executed sequentially, it has no sense that works with sleep call. Do you know what can be happening? Because sleep solution is not a very good idea, i've to spend 4 or 5 seconds in every call invoke!
Thanks!

Hi,
1. It is not clear to me if the missing fields are missing from the model defintion or from the SOAP request?
2. What is the VC version you are using?
3. I suggest to raise the trace level of the web services connector to: "All" using the NWA log configuration (location: "com.sap.portal.connectors.WebServices") -> reproduce => check the java default trace errors
Best Regards,
Ran

DLL Call doesn't work the second time

The first time I open the VI, it runs properly. Why doesn't doit the next time I open it.
Attachments:
PGS67Open.llb ‏72 KB

Dobi,
Please post the dll. I cannot run your code without it.
Also, the problem may be that you cannot call this twice, without first 'closing' the device. You may be trying to use resources that are already in use. This would be the same as opening a daq session that is already in use.
Try that, and if you can't get it working still, post the code or some more information.
Good luck

D900 sms / call doesn't work with address book

Unlike similar posts,
the 'SMS' and 'Dial with' options ARE avaliable and the phone pairs just fine.
However, when I type a message and send, nothing happens phone side. Same with dial a call.
The bluetooth emblem on the Adress book remains glowing blue. The phone doesn't seem to stay connected though(?).
at least I can sync now though (10.4.9)
Thanks for any insight!!!
Luke

I'm also having this issue. While the phone appears to "pair" with Address Book and the options for SMS and dial are available, they perform no function at all as far as I can tell.
iSync works fine with the phone now however (thanks to 10.4.9). If anyone has any further information, it would be very much appreciated.

¿Why sms and cell calls doesn't work on mac?

I downloaded iOS 8.1 and have yosemite OS installed in my mac. i have tried to use the calls and sms feature but none of this works.
In the calls when i try to call someone a message pops up saying that i must have an iphone and a mac with the same iCloud and FaceTime account. But the devices that i'm using do have the same accounts and still does't work!!
I have noticed that my phone number does't appear with a check and that in the FaceTime of my iphone a message down the switch to activates says "waiting for activation", but i can still make normal FaceTime calls. does this have something to do? how do i fix it? i have tried to reset the settings but everything is still the same.
In the sms feature the same message "waiting for activation" is down the iMessage title, i can send iMessages but when i try to activate sms a message says "enter the code displayed on the other device" but the code in my mac never shows up. What's the problem here? i have also tried to reset the settings and rebooting the devices but it's the same. Does this has to do with my phone number being unchecked? the problem is that i can't check it, the opti
Please help me.

Hello...
The SMS Relay and Phone Calls only work with a Mac device with Bluetooth 4.0 and later. If you want to see if your device has this, click on the Apple menu in the Menu Bar and choose About this Mac. A window then comes up with device information. Click System Report. On the sidebar, choose Bluetooth. At the top of the window it says Apple Bluetooth Software Version. If the number next to it is less than 4.0, your Mac device is too old. If it is above 4.0, your internet connection may have problems. Also if it says No next to Handoff supported, one of the devices is too old.
Good luck

Yosemite - Desktop Call doesn't work

I have a Late 2011 Macbook Pro and I've just upgraded to Yosemite. However, I can't receive my calls from my MBP. The notification which should be appearing on the upper right corner, doesn't show up. Any ideas, why ?

Do you know if there is anyway you can be signed in with a different apple ID for iCloud and a different apple ID for FaceTime. My id for FaceTime is different and has my phone number associated with it. Thank you.

Multiple Service called doesn't work as expected

Hello
I have been trying to do this.
callresponder id="test"
SomeService properly imported through Flash Builder 4
for (var i:int=0;i< pool.length;i++)
test.token = SomeService.getSomething(pool[i].someValue);
Only the first one would be successful. It seems that while result event has not occurred the service is busy and cannot be used. Is there a way to workaround this?
Help! I don't want to call after result event!

The point is I want to avoid waiting for each service to complete, although what you suggest would work I finally figured it out how to solve this problem.
Problem: The problem is one call responder cannot be used by multiple service call.
Solution: Make more call responders....
var c:CallResponder;
before each iteration begins
c = new CallResponder();
c.addEventListener(ResultEvent.RESULT, resultHandler);
c.token = SomeService.whatEver(something);

GetByProducId API call doesn't work

Hi all,
I have a question about a DPS api call. In the previous API versions (v24 and lower) of when I did the following call:
var productId = $(this).data('productId'),
folio = adobeDPS.libraryService.folioMap.getByProductId(productId);
It returned the folio with the productId from the data attribute.
When I try it with the current version (v25) it returns null.
What am I doing wrong? Or what has changed?
Best regards,
Mike

I'd suggest you comment back on the relevant section/topic at DPS Devnet http://www.adobe.com/devnet/digitalpublishingsuite.html
or contact Developer support with your Gold support contract information

Call doesn't work

I have following setup
Outside Caller --- SIP TRUNK ---- CALL MANAGER ---- Phone A RNA VOICE MAIL ---- (SCCP Ports) ---- CALL MANAGER ------- SIP or SCCP Phone B
1. Inbound call on SIP Trunk to Phone A
2. Phone A RNA trigger and calls forwarded to VM
3. Outside User hear a Personal Greeting and press "0" to transfer to operator phone B
4. I see call Ringing on Phone B but ouside user do not hear ringback tone
5. Outside user hear disconnect tone but still call is ringing on Phone B and no audio if answer
VM system is not Cisco and it has SCCP integration with UCM.
Call from SIP trunk is g729 and I do have HW xcoder and MTP in MRGL.

Not sure the sip message flow and callmanager trace, but here is some general idea.
Did the ccm send 180/183, if it has sent to outside caller's service provider, the service provider is responsible to provide the ringback tone except they require in-band ringback tone via PRACK.

Viber call doesn't work

Similar Messages

Maybe you are looking for