Viber shuts down after i put in my phone number during installation

I recently found out that my viber contacts have been duplicated. So i deleted viber and reinstalled it.  After reinstalling i tried to sign up again.  After puting in my cell number, viber just shuts down.  When i click on it again it goes on but shuts down automatically after a second. Please help... Thanks!

Hi @abhishek2107 -
Thank you for the report of the problem.
We kindly ask that you take a minute and report the details of the problem to our support team using this direct link: http://bit.ly/ukGVJ0 (when you submit the ticket, please make sure to add the URL of our conversation). With this information, our development team will hopefully be able to find the source of the problem, and ultimately resolve it.
Thanks in advance

Similar Messages

  • G5 Shuts down after I put it to Sleep

    Why is my G5 suddenly shutting down all the time when I put it to sleep .... I come back to use it and I have to power it up each time ?

    To log a sequence of events:
    Open the Console application, located in Applications/Utilities.
    Click Logs in the toolbar.
    Click the triangle next to a log to see more available logs.
    Select the appropriate log and click Clear.
    Perform the actions that produced the problem you are troubleshooting.
    Read the messages that appear in the Console window.
    Hello .... I can't seem to find where to " Search " and enter " Shut Down " .... I have opened Console and and able to open the triangles on many things ... This is one of them ... is this the correct one below ?
    ALSO - about 4 - 5 years approx. after the warranty expired I had a problem with the power supply and Apple Canada replaced it and the Mother Board free of charge $ 1300.00 would have been the cost there abouts ... Does this mean the same thing is happening again ??? I doubt if I have the info and the paperwork for that repair ( dumb me, I wish I did now ) .... Is there a way for me to find that info with my serial number ?
    If so - do you know why it would happen again and if so , is Apple still prepared to stand behind their product once again ?
    Thanks Much for you Help .... is the " below " does not show you what you asked me to find ... what are the steps I should do for you ... ?
    Eric
    Jun 28 19:35:50 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
    Jun 28 19:35:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:41:40 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
    Jun 28 19:47:34 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
    Jun 28 19:47:34 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:34 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:35 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
    Jun 28 19:47:35 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
    Jun 28 19:47:35 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:44 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:45 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:46 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:48 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:48 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:47:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:48:51 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Jun 28 19:48:51 Eric-Willies-Computer shutdown: reboot by ericwillie:
    Jun 28 19:48:52 Eric-Willies-Computer SystemStarter[706]: authentication service (714) did not complete successfully
    Jun 28 19:49:57 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jun 28 19:49:56 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[33]: starting
    Jun 28 19:49:58 localhost kernel[0]: vmpagebootstrap: 508164 free pages
    Jun 28 19:49:56 localhost memberd[43]: memberd starting up
    Jun 28 19:49:58 localhost kernel[0]: migtable_maxdispl = 70
    Jun 28 19:49:57 localhost lookupd[42]: lookupd (version 369.8) starting - Mon Jun 28 19:49:57 2010
    Jun 28 19:49:58 localhost kernel[0]: 96 prelinked modules
    Jun 28 19:49:58 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jun 28 19:49:58 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jun 28 19:49:58 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
    Jun 28 19:49:58 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
    Jun 28 19:49:58 localhost kernel[0]: DART enabled
    Jun 28 19:49:58 localhost kernel[0]: USB caused wake event (EHCI)
    Jun 28 19:49:58 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 000d93ff fe466022; max speed s400.
    Jun 28 19:49:58 localhost kernel[0]: Security auditing service present
    Jun 28 19:49:58 localhost kernel[0]: BSM auditing present
    Jun 28 19:49:58 localhost kernel[0]: disabled
    Jun 28 19:49:58 localhost kernel[0]: rooting via boot-uuid from /chosen: 9FA6414F-22D6-339E-B202-EB404D827F6C
    Jun 28 19:49:58 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jun 28 19:49:58 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST380013AS Media/IOApplePartitionScheme/Untitled@3
    Jun 28 19:49:58 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
    Jun 28 19:49:58 localhost kernel[0]: AppleSMU -- shutdown cause = 2
    Jun 28 19:49:58 localhost kernel[0]: AppleSMU::PMU vers = 0x000d0054, SPU vers = 0x15, SDB vers = 0x01,
    Jun 28 19:49:58 localhost kernel[0]: Jettisoning kernel linker.
    Jun 28 19:49:58 localhost kernel[0]: Resetting IOCatalogue.
    Jun 28 19:49:58 localhost kernel[0]: Matching service count = 1
    Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
    Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
    Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
    Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
    Jun 28 19:49:58 localhost kernel[0]: Matching service count = 4
    Jun 28 19:49:58 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
    Jun 28 19:49:58 localhost kernel[0]: NVDANV30HAL loaded and registered.
    Jun 28 19:49:58 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
    Jun 28 19:49:58 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Jun 28 19:50:01 localhost diskarbitrationd[41]: disk0s3 hfs 9FA6414F-22D6-339E-B202-EB404D827F6C Macintosh HD /
    Jun 28 19:50:01 localhost diskarbitrationd[41]: disk1s1 msdos 00000000-0000-0000-0000-000000000000 LACIE [not mounted]
    Jun 28 19:50:02 localhost usbmuxd[37]: usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
    Jun 28 19:50:02 localhost DirectoryService[53]: Launched version 2.1 (v353.6)
    Jun 28 19:50:04 localhost kernel[0]: UniNEnet: Ethernet address 00:0d:93:46:60:22
    Jun 28 19:50:04 localhost lookupd[67]: lookupd (version 369.8) starting - Mon Jun 28 19:50:04 2010
    Jun 28 19:50:05 localhost kernel[0]: NVDA,Display-A: vram [a0000000:08000000]
    Jun 28 19:50:06 localhost kernel[0]: NVDA,Display-B: vram [00000000:01000000]
    Jun 28 19:50:07 localhost kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    Jun 28 19:50:07 Eric-Willies-Computer configd[39]: setting hostname to "Eric-Willies-Computer.local"
    Jun 28 19:50:09 Eric-Willies-Computer launchd: Server 2b1b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[67]: exited abnormally: Hangup
    Jun 28 19:50:09 Eric-Willies-Computer configd[39]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Jun 28 19:50:09 Eric-Willies-Computer configd[39]: posting notification com.apple.system.config.network_change
    Jun 28 19:50:09 Eric-Willies-Computer lookupd[73]: lookupd (version 369.8) starting - Mon Jun 28 19:50:09 2010
    Jun 28 19:50:11 Eric-Willies-Computer mDNSResponder: Adding browse domain local.
    Jun 28 19:50:12 Eric-Willies-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Jun 28 19:50:13 Eric-Willies-Computer configd[39]: target=enable-network: disabled
    Jun 28 19:50:21 Eric-Willies-Computer loginwindow[71]: Login Window Started Security Agent
    Jun 28 22:39:21 Eric-Willies-Computer diskarbitrationd[41]: disk1s1 msdos 00000000-0000-0000-0000-000000000000 LACIE /Volumes/LACIE

  • IMac G5 (1.8 Ghz) Shuts down after being put to sleep

    My G5 shuts down immediately after being put to sleep and shortly after falling into sleep mode automatically. I have reset the SMU to no avail. I have also reset the Energy Saver preferences to the default setting.I didn't have this problem prior to installing OS 10.4.11. Any suggestions?

    To The Apple Discussion Boards!
    Have you tried repairing permissions & restarting either from the Utility Menu or your Tiger Install DVD?
    See if your computer qualifies for the G5 iMac Repair Programs
    **WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER ON THESE MESSAGE BOARDS.**

  • Viber shuts down / close after i open it , tried reinstall

    Viber shuts down / close after i open it , tried reinstall .. Deleting and installing again ..
    Can too much groups cause this ? ..
    What to do ?
    I have iphone 4s 5.1.1
    Thank you .

    Hi guys!
    This is a member of the Viber Team.
    Please contact our support team for further assistance at: http://helpme.viber.com/index.php?/Tickets/Submit/RenderForm/13
    Please feel free to let us know your thoughts, questions and comments, we'd be happy to assist.
    Thanks,
    Viber Team

  • Mac won't shut down after 10.6.8 update - a possible fix

    I noticed that after updating my MacBook Pro to 10.6.8 (using the latest 1.1 combo update) that often times when attempting to shut-down after using Safari the computer would just hang or, I'd get a message that said something like, "OSX didn't log you out because Safari did not quit...".
    After putting the system into SAFE BOOT mode and trying to launch Safari I was getting tons of errors about Flash Player plug-in 10.6 crashing.
    After downloading the latest Flash player plug-in from Adobe the hang-on-shutdown behavior seems to have stopped.
    FYI for those who haven't found a fix.

    Hi, I've just come accross the same problem... did you manage to get a resolution??
    Cheers, Chris.

  • Mail shut down after launch

    Even after Recovery installation of OS X, Mail on ly worked one day before Mail again shut down after launch and receiving incoming mails. Any who have a functionally solution to fix this subject.

    Do a backup.
    Quit Mail.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail.  Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Restart, re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis. Thanks to leonie for some information contained in this.
    Crashes/quits unexpectedly

  • My computer shuts down when I put it to sleep

    Ever since I used some of those auto-download upgrades my Mac shuts down when I put it to sleep. What's wrong?

    Hi gazebo, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Mac mini shuts down after 10 seconds..

    At first today, the CDs and discs kept automatically ejecting and wouldn't read (obviously). So I keep putting them back in hoping it would read or hold something. Then I restarted and the Mac Mini shuts down after 10 seconds of the seeing the desktop. Did I fry it? I did hear a weird sizzling when I put my hand on top of the mini. And is this under any warranty - I bought it Feb. 07? Any help would be greatly appreciated.

    Any thoughts on that?
    One or two come to mind, not least that if the unit is under warranty now (as it clearly is) and they aren't taking this fault seriously, then buying AppleCare so it remains under warranty longer isn't the right solution - having them examine it and resolve the problem is.
    There's no doubt at all that in the event there is a system with a suspected fault, extending the warranty long enough that the system ceases to function and can be repaired is a good thing, but it shouldn't be necessary to go to that extreme in order to get a problem resolved now!
    I would simply take this elsewhere and have it looked at. While odd noises are sometimes hard to hear in an environment where there are people and other activities going on, and thus it is reasonable to expect diagnosis of them to prove difficult, a system that shuts down of its own accord after a few seconds is clearly not working correctly. To be sure, if it is overheating, then testing it when it's cold is likely to miss the problem, but the description of the fault from the user ought to give enough clues to put the system on test long enough to see what happens when it warms up. If the fault can't then be replicated with a system that is at normal running temperature and under load, then giving it a clean bill of health is reasonable.
    Thus, in your place I would ask them if they did, in fact, test it in that way. Alternatively, write a description of the fault, specifically identifying the premature shutdowns and the circumstances in which they happen (if they still do) and the noises and the circumstances in which they occur (if they still do) and take the system and description to an approved service provider and let them look at it.
    If the shutdowns are no longer occurring, and the noise is absent, then whether you buy AppleCare or not is really a matter of how confident you are that the problem has gone. If you have doubts that the system is running correctly, AppleCare is expensive but at least extends the warranty sufficiently that you can stop worrying too much. Alternatively, if the problem(s) still persist, rather than AppleCare, have the system examined and repaired right now.

  • HP 15-f009wm shuts down after one minute

    HP 15-f009wm, shuts down after one minute at idle. If you are doing something on it, like moving the mouse, it will stay on. I tried to go in, and change the power plans, and the options pertaining to this, but no help at all. I even tried to take the password off, so my wife wouldn't have a hard time trying to put it in, everytime it shuts down.  I seen the option, marked it, and it still needs the password to open it.

    If you have a virus and malware infestation, they you will have to certainly address that. This might be a good starting point to attempt to clean your system: Resolving and Preventing Viruses on Your Computer (Windows 8)
    This is one way you can prevent or at least reduce potential infection in the future:
    Using Windows 8 Defender to Prevent Virus and Spyware Problems
    Some virus and malware are very tough to remove. This may be the quickest way to clean your system and start over. If you do this, you may want to take the time to clean any external drives you may have (ie. USB Sticks) as to not potentially infect your system again: Performing an HP System Recovery (Windows 8)
    I hope this helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My computer shuts down after being unplugged

    My powerbook G4 sometimes shuts down when I unplug it, even though the battery is fully charged. This seems to happen more often when I unplug it and then pick it up (or put it down). After I restart it, the clock and date have been reset to 1970.
    Any ideas of what may be wrong?

    Hi c,
    Welcome to Apple Discussions.
    How long does your PB run on the batt when it does not shut down after removing the power adapter? If a very short time, you may have a nearly dead batt, and the backup batt, even if it is still operational, only lasts a few minutes; once that is dead too, then date and time are reset.
    I should have said this first, but just noticed that you said movement seems to cause the issue. That strongly suggests a loose battery. The "fix" can be as simple as wedging a thin piece of rubbery material between the battery compartment and the battery itself, on the side opposite the contacts, to make the contacts remain in contact at all times (earlier models had this issue, but it was supposedly fixed on later models, yet we still hear about it periodically).

  • What do I do if an iPod shuts down after going into sleep mode

    My friends iPod keeps shutting down after it goes into sleep mode. I just fixed it up (restored it, had to dry it out after it fell into water) and now it does that. Everything else works fine but if I put it in sleep mode or put it into sleep mode it shuts down. How do I fix this because I've never seen this happen before.

    Hey Tecmo_SB_Guy, 
    I would suggest you take a look at advanced power settings. It can seem like the notebook is turning off when it is actually just hibernating. You can set it to not hibernate. 
    1. Windows key + Q to open the Search Bar
    2. Type "power" 
    3. Click Settings under the Search Bar
    4. Select Power Options from the results on the left. 
    5. In Power Options, Click Change when the computer sleeps, on the left. 
    6. Set the Put the computer to sleep setting so that it fits your usage best. 
    7. Click Change advanced power settings, at the bottom.
    8. Expand Sleep and expand Hibernate after. If you want you can change the hibernation setting to Never by typing "Never" into the minutes field. See attached picture. You can do this for battery and/or plugged in.
    9. Click Apply to save changes.
    If you don't already shut it down periodically, I would suggest shutting it down at least 2-3 times a week if you use it daily. Leaving the computer running continuously can shorten its lifespan. Hard drive failures and motherboard issues are seen much more often on machines that are left running constantly. Computers get bogged down and run slowly when the memory is full. Memory only clears out and resets itself when the computer is shut down. Here is a link explaining more about memory accumulation and hardware aging.
    I hope these suggestions help! Please let me know if you have any questions
    Attachments:
    PowerHibernateNever.jpg ‏59 KB

  • Macbook Pro keeps shutting down after a period of inactivity

    I don't know if my problem is related to this but after trying to set up Apple's 1Password, my laptop now shuts down after some time after I put it to sleep or even if I don't put it to sleep but don't use it for awhile.      Any ideas?

    Interval Since Last Panic Report:  15746 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    6D0A9F4E-7842-8892-C4EB-02A0645B2A1F
    Thu Feb  6 21:29:20 2014
    panic(cpu 4 caller 0xffffff802e6b8945): Kernel trap at 0xffffff7faef3fe59, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000040, CR3: 0x000000003112b000, CR4: 0x00000000001606e0
    RAX: 0x0000000000000000, RBX: 0x0000000000000001, RCX: 0x0000000000000000, RDX: 0x0000000000002400
    RSP: 0xffffff812206b9b0, RBP: 0xffffff812206ba50, RSI: 0x0000000000000000, RDI: 0xffffff8101fb1000
    R8:  0xffffff7faf13d8fc, R9:  0xffffff812206b584, R10: 0xffffffffffffffff, R11: 0xffffff802ec85ef8
    R12: 0x0000000000000000, R13: 0xffffff812206bcf8, R14: 0xffffff8101fb1000, R15: 0x00000000ffffff00
    RFL: 0x0000000000010282, RIP: 0xffffff7faef3fe59, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000040, Error code: 0x0000000000000000, Fault CPU: 0x4
    Backtrace (CPU 4), Frame : Return Address
    0xffffff812206b650 : 0xffffff802e61d636
    0xffffff812206b6c0 : 0xffffff802e6b8945
    0xffffff812206b890 : 0xffffff802e6cebfd
    0xffffff812206b8b0 : 0xffffff7faef3fe59
    0xffffff812206ba50 : 0xffffff7faef33d37
    0xffffff812206bbe0 : 0xffffff7faed2a0d7
    0xffffff812206bc60 : 0xffffff7faed1659b
    0xffffff812206bcd0 : 0xffffff7faed191d8
    0xffffff812206bd40 : 0xffffff7faed19363
    0xffffff812206bdb0 : 0xffffff7faed18dd4
    0xffffff812206be10 : 0xffffff7faecdfc48
    0xffffff812206be50 : 0xffffff7faecdef33
    0xffffff812206be80 : 0xffffff7faecde2e8
    0xffffff812206bef0 : 0xffffff802ea50e58
    0xffffff812206bf30 : 0xffffff802ea4f95a
    0xffffff812206bf80 : 0xffffff802ea4fa89
    0xffffff812206bfb0 : 0xffffff802e6b3257
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7faecd1000->0xffffff7faed08fff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7faec8e000
             com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7faed14000->0xffffff7faed25fff
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7faecd1000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7faec8e000
             com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7faed 28000->0xffffff7faefcafff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7faec8e000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7faed14000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7faecd1000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12F45
    Kernel version:
    Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
    Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
    Kernel slide:     0x000000002e400000
    Kernel text base: 0xffffff802e600000
    System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
    System uptime in nanoseconds: 17992128474525
    last loaded kext at 9828800164554: com.apple.filesystems.msdosfs          1.8.1 (addr 0xffffff7fb0a4a000, size 65536)
    last unloaded kext at 7712720771981: com.apple.filesystems.msdosfs          1.8.1 (addr 0xffffff7faf31a000, size 57344)
    loaded kexts:
    com.apple.filesystems.msdosfs          1.8.1
    com.apple.filesystems.smbfs          1.8.4
    com.apple.driver.AppleBluetoothMultitouch          75.19
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.60
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.1.7f2
    com.apple.driver.ApplePlatformEnabler          2.0.7d2
    com.apple.driver.AGPM          100.13.12
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.4.7fc4
    com.apple.driver.AppleMikeyDriver          2.4.7fc4
    com.apple.GeForce          8.1.6
    com.apple.driver.AppleUpstreamUserClient          3.5.12
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.1.7f4
    com.apple.driver.AppleIntelHD4000Graphics          8.1.6
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleSMBusPCI          1.0.11d1
    com.apple.driver.AppleLPC          1.6.3
    com.apple.driver.AppleIntelFramebufferCapri          8.1.6
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleMuxControl          3.4.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.iokit.SCSITaskUserClient          3.5.6
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.driver.AppleUSBODD          3.3.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.5
    com.apple.driver.AppleSDXC          1.4.3
    com.apple.driver.AppleUSBHub          635.4.0
    com.apple.driver.AirPort.Brcm4331          615.20.17
    com.apple.driver.AppleAHCIPort          2.6.6
    com.apple.driver.AppleUSBEHCI          621.4.6
    com.apple.driver.AppleUSBXHCI          635.4.0
    com.apple.driver.AppleIntelCPUPowerManagementClient          214.0.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          1.8
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.8
    com.apple.driver.AppleAPIC          1.7
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          214.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard          170.2.4
    com.apple.driver.AppleHIDKeyboard          170.2.4
    com.apple.driver.IOBluetoothHIDDriver          4.1.7f2
    com.apple.driver.AppleMultitouchDriver          237.4
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.DspFuncLib          2.4.7fc4
    com.apple.iokit.IOAudioFamily          1.9.2fc7
    com.apple.kext.OSvKernDSPLib          1.12
    com.apple.nvidia.gk100hal          8.1.6
    com.apple.NVDAResman          8.1.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.1.7f2
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.iokit.IOAcceleratorFamily          74.15
    com.apple.driver.AppleHDAController          2.4.7fc4
    com.apple.iokit.IOHDAFamily          2.4.7fc4
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.7f2
    com.apple.driver.AppleSMC          3.1.5d4
    com.apple.driver.IOPlatformPluginFamily          5.4.1d13
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.6
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.6
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOUSBMassStorageClass          3.5.2
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.6
    com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.3.2
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          623.4.0
    com.apple.driver.AppleUSBMergeNub          621.4.6
    com.apple.driver.AppleUSBComposite          621.4.0
    com.apple.driver.CoreStorage          296.18.2
    com.apple.driver.AppleThunderboltNHI          1.9.2
    com.apple.iokit.IOThunderboltFamily          2.7.7
    com.apple.iokit.IO80211Family          530.5
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBUserClient          630.4.4
    com.apple.iokit.IOAHCIFamily          2.5.1
    com.apple.iokit.IOUSBFamily          635.4.0
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.8
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f36
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 3 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM256E, 251 GB
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: MacBook Air SuperDrive, apple_vendor_id, 0x1500, 0x1a120000 / 4
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2512, 0x1d180000 / 3
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 7
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 4

  • Macbook shutting down after 10 seconds of inactivity

    Hi,
    My daughters macbook will not power up unless you run your finger over the trackpad, it just shuts down if you are not doing this. This also happens during normal use if left for more than 10 seconds. It puts the the shut down message and powers down the macbook. Any ideas?

    Are you still having problems? or is it fixed?
    I have just been through a big problem similar to this but mine was shutting down after 40mins.
    The reason I said "big" was that I have had the problem when doing large downloads and then having to restart them again only to have it happen again. I had spoken to AppleCare and for more than a year the issue was not resolved.
    I was told to take my computer the local 'MacDoctors' and they said they thought it was the Hard Drive and replaced it and then charged me to transfer my data. The data transfer was mucked up (if you don't know what Mucked Up means replace the 'M' with a 'F' and you'll get it) causing more trouble.
    It didn't fix the problem but it did mean I couldn't go for a Macca's for a month (kidding - I still went to Maccas but didn't order fries).
    Anyway, finally, in desperation and much frustration I thought I would give the Apple Care guys another go and got an 'escalation' guy that really took charge of the problem. He didn't know what to do to fix it but was talking about it to one of his fellow super techosleuths and his friend asked has he looked at the 'Security and Privacy' option in the System Preferences?
    Inside that option is an 'Advance' option (OSX 10.7.5) and once opened has a tick box which asks when you want your computer to shut down. Sure enough it was ticked for 40mins - it is now unticked.
    I have mentioned this to Applecare people and the MacDoctors and NONE of them had any idea that this tick box was in that section of the system.
    Computer shutting down?..... check it out.

  • Km3m mobo shut down after a few seconds

    i have been playing with this new mobo for a while now trying to get it to work
    it keeps shutting down after 15 or so seconds, so i tried every possible combination
    with the power sw and reset sw and such. still had problem so i came on here to read up on similar problems. then i read some advice that cpu might be overheating or heating to quickly and is causing comptuer to shut off. so i took out the cpu and turned her on and she didnt not shut down so i am assuming that i have this problem. the advice given to the other guy was to make sure the hsf paste was on correctly. now is the paste that improtant or is the hsf defect any advice?

    yeah i didnt put the paste on the die, didnt think it made such a difference, have to wait a little bit to go get some more paste. but now the original psu is not working,( it was an hour ago), i got another that is but i cant keep it. the fan works when you do the green wire black wire trick so i am really confused now. yes wires are connected properly
    oh rates on psu non- working one  +3 @ 28a, +5@40a, +12@17a
    3+5 total max 220w, total 380w
    working one +3@38a +5@28a +12@23a
    3+5 total 240, total 380

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

Maybe you are looking for

  • ITunes stuck on backing up my iPhone 5C

    I have an iPhone 5C and I tried to get my pictures on my phone.  As soon as I pressed apply it went into the syncing process and froze on "Backing up"  I just want my pictures on my phone.  It's a new out of the box iPhone 5C and I've never backed it

  • Advice on client proxy generation (ABAP and SAP PI)

    Hi, I've set up an ABAP client proxy using the wizard in transaction SE80 in the backend system, released it using transaction SOAMANAGER and tested that it works. I now want to compare this technical approach against the same scenario using a proxy

  • Hp 8600. WINDOWS 7. ADMIN LOCKED. I am the Admin but can't get in. No IP address.

    HP 8600 printer.   Using Windows 7. IP:  No link Network Name:  Not applicable Wireless Direct: Off I am the Adminstrator.  Since there's no connectivity, I can't get to the printer's Embedded Web Server (EWS) page to reset the Network Settings.  Can

  • Problem after installing 1.2.5.0.0

    After I've installed the lastest Migration Workbench, I recived an error when I tried to start a service of my Oracle database. Oracle.exe - Entry Point Not Found The procedure entry point kghsstdrv could not be located in the dynamic link library or

  • Translation problem , While conversion from English to Poland

    Hello Gurus Pl suggest  Translation problem , While conversion from English to Poland  getting message "Code page not found for Poland " Code page 1401 exits in system SAP version 4.6C Best regards Krish