Vibrating Pixels - Not on during startup
Hello,
On my Powerbook (which hasn't been used in a month but the issue did not appear the last time used), now the screen has random distorted pixels all over the screen. It is not the lines that most people have reported, rather a strange pulsating type of look. When booting up or shutting down the computer, the screen looks fine, but as soon the background loads they appear. The seem to also spread the longer the computer is on. Any suggestions?
Thanks
Actually, I was expecting that it would make the system crash Hmm!
Have you tried changing your desktop background? There are some patterns that will cause interesting artifacts on LCD panels. See this page for more details - http://www.techmind.org/lcd/
I'm surprised you don't have the correct hardware test DVD (it should have come with your system), but trying the up to date one will be helpful.
Similar Messages
-
Aluminium keyboard sending repeat keystrokes/not recognised during startup
hi everyone, my first post here,
i recent purchased an additional slimline alu-keyboard for my imac to customise as an editing keyboard for logic pro. only problem is i appear to be having issues with it. recently it has been sending repeat keystrokes in os x. it's not one of the letter keys because no text is typed onscreen. the other issue is that during startup none of the boot-up keys are recognised (ie. reset pram combination/bootup menu) with leads me to belive something is very wrong.
i have already tried reseting the pram - although i had to use my other keyboard to do this as the new one isn't recognised. i also tried reseting the smc but it seems certain that there is an issue with the keyboard itself
the keyboard is still well within warranty and i have my receipt but i'm concerned about the fact that it has been customised with a editing layout set and might not be replaced
hope someone can suggest something!
thanks
jps. i just did a little further googling and it seems to be suggest that this is a 10.5.6 usb related issue
-
Fingerprint Reader Not Detected during startup on Windows 7
Dear Community Users/Tech Guru,
I am hoping somebody could shed light into a weired issue I am facing with this *stupid* Microsoft OS. I purchased a T400 last year and brought a x64 bit Windows 7 three months ago and have it setup for clean installation. I followed the procedure published in lenovo.
I had the security setup of my notebook to use pre-desktop authentication and single sign-on. I had everything setup and running.
However, after a few weeks I began to noticed that upon power up and giving a fingerprint swipe on the bios authentication, it would halt on the windows startup page (where we would normally login). It turns out that the fingerprint device is not detected! Something is not workin properly during the startup of bill gates Microsoft Windows 7! I would try a reboot on the system and it will load properly afterwards.
But I find it stupid that Windows doesn't detect my fingerprint device on startup! This happens when it's a cold boot using a battery (at least 70% of the time it turns out that way). I disabled the single sign-on but retained the desktop authentication (means I have to swipe twice). But this f*ck OS is still not detecting it during cold start.
Anyone... please advice?
Solved!
Go to Solution.I attempted to reset the policy settings of CSS but then the pop up screen just got stuck:
- I did a reboot and reset the fingerprint data and password (after exporting the
settings),
- uninstalled the fingerprint reader and CSS
- uninstalled the CSS. I had encountered some issues while uninstalling it
Windows is reporting that the installation log file could not be found. I manually
downloaded the driver from the site and used the installer to remove it from my PC
- Reinstalled both CSS and Fingerprint driver
- Import all my security settings (password and fingerprint)
- Tested CSS and used fingerprint as default login method in battery mode
- Enabled Single SignIn method in CSS and BIOS
So far so good, the reinstallation fixed the issue. I did recall that there was a windows update before this mayhem on the fingerprint reader started. -
Bookmarks LIST does not load during startup.
Until recent Firefox update, my BOOKMARKS list would automatically load during Firefox start up. Now when starting up, I must every time manually select "View", "Sidebar" & "Bookmarks" to populate Bookmarks list. How do I reestablish the automatic Bookmark list during start up? Thx, Gerald
A possible cause is a corrupted file localstore.rdf.
See http://kb.mozillazine.org/Corrupt_localstore.rdf -
CS3 Extension that initializes a JS-Object during startup is not working in CS4
Here is a simple Extension that works fine in DW CS3 and doesn't work in DW CS4 (trial version):
The File myObj_Startup.htm was placed in Folder Configuration/Startup. It initializes a quite simple Javascript-Object during Startup of DW.
Content of myObj_Startup.html:
<!-- MENU-LOCATION=NONE -->
<HTML>
<HEAD>
<TITLE>beim Öffnen</TITLE>
<SCRIPT LANGUAGE="javascript">
myObj =
showMsg : function (msg)
alert(msg);
function onOpen()
myObj.showMsg("startup");
// SCRIPT ENDE
</SCRIPT>
</HEAD>
<BODY onLoad="onOpen();">
</BODY>
</HTML>
Besides this, an additional menuitem was defined in menus.xml to use the JS-object myObj:
<menu mmstring:name="menus/DWMenu_File" id="DWMenu_File">
<menuitem name="Test" command="myObj.showMsg('Testing');" enabled="true" domRequired="false" id="DWMenu_File_SIEMENSTEST" />
<menuitem mmstring:name="menus/DWMenu_File_New" key="Cmd+N" command="dw.newDocument()" enabled="true" domRequired="false" id="DWMenu_File_New" />
With Dreamweaver CS3 everything works out fine: I get a Alert-message: "startup" during Startup and when I'm clicking Menu->File->Test I get a Alert-message: "Testing".
With Dreamweaver CS4 (trial version) I get a message: "startup" as well but when I'm clicking Menu->File->Test I get no message.
Instead I get a Logfile "C:\Documents and Settings\user\Application Data\Adobe\Dreamweaver CS4\en_US\Configuration\Logs\DW JavaScript.log" telling me:
JS Error:
myObj is not defined
filename:
lineno: 0
While executing DWMenu_File_TEST command in menus.xml, the following JavaScript error(s) occurred:
ReferenceError: myObj is not defined
Why is this simple extension working in DW CS3 and not working in DW CS4?
Did they change the treatment of JS-objects initialized during startup?
Is the object out of scope?
Are such extensions not working in trial versions of DW CS4?
I cannot explain this behavior - please help!Hi,
I have an similar problem and couldnt find an workaround for the problem.
When i add an new menu item to the menus.xml file, the menu item shows up, but my custom command (simple alert) wont trigger.
Can somebody please help? -
Diskgroup not mounted during cluster startup
Hi,
I have a 2 node RAC(11GR2) on VMWare 7.1.4. OS is Solaris 10
I have registered 2 instances in the cluster.
srvctl add database -d dbrac -o /u01/app/oracle/product/11.2.0/dbhome_1 -a "extdg,nordg"
srvctl add instance -d dbrac -i dbrac2 -n vmsol2
srvctl add instance -d dbrac -i dbrac1 -n vmsol1
After after registering the 2 instances, initially the instance were automatically up when ever I execute a ./crsctl start cluster.
But now the database instances on both nodes are not comming up; only ASM is up.
While checking ASM disk group, I found EXTDG and NORDG is not mounted. So I mounted the disk group and started the database.
Then I manually mounted, the disk groups and started the database.
SQL> alter diskgroup nordg mount;
Diskgroup altered
SQL> alter diskgroup extdg mount;
Later I tried removing the the database configuration from the cluster using SRVCTL and added the database to cluster again.
srvctl remove instance -d dbrac -i dbrac1
srvctl remove instance -d dbrac -i dbrac2
srvctl remove database -d dbrac
srvctl add database -d dbrac -o /u01/app/oracle/product/11.2.0/dbhome_1 -a "extdg,nordg"
srvctl add instance -d dbrac -i dbrac2 -n vmsol2
srvctl add instance -d dbrac -i dbrac1 -n vmsol1
Still database is not starting during cluster startup.
Why did the disk group is not getting mounted while cluster is starting? Can someone help me?
Regards,
Mat
Edited by: user11278087 on Mar 9, 2012 7:37 PM
Edited by: user11278087 on Mar 9, 2012 7:41 PM
Edited by: user11278087 on Mar 9, 2012 7:42 PMHi,
Thank you for your replay.
Disk group was mounting previously without doing any modification in spfile after executing the following commands.
srvctl add database -d dbrac -o /u01/app/oracle/product/11.2.0/dbhome_1 -a "extdg,nordg"
srvctl add instance -d dbrac -i dbrac2 -n vmsol2
srvctl add instance -d dbrac -i dbrac1 -n vmsol1
But suddenly this issue happened.
I do not have metalink access. Could you please help me?
Regards,
Mat. -
Freeze during startup if magic trackpad not available
Down in SF last week and bought a magic trackpad and installed it. worked fine.
Got home and turned on my MBP; it froze during startup with only the finder window open, no dock, and not much else. mouse pointer couldn't click on things, etc. I tried restarting and restarting into my test (bare bones) account. No luck.
Then I wondered if the problem was that my new magic trackpad was there and turned on. That was the problem. As soon as I got the trackpad and turned it on, my system completed normal startup.
Anyone else have this experience. This seems like a bug.Today I tried to replicate my problem and couldn't. Either by turning off the trackpad before I shut down or else while my computer was off.
So apparently my incident was an isolated one. -
Strange Apple Logo Behavior During Startup
I've got a 15" Powerbook with 10.3 installed on it that is exhibiting some strange startup behavior.
When the apple logo appears during startup, it briefly shakes and then becomes pixelated.
Startup continues after this, and the computer is not exhibiting any other problems.
However, I'm concerned that it might be a sign of a more serious problem that I need to address sooner rather than later.
I've scoured the discussion boards, but haven't come up with any other similar reports.
Any one have any ideas?When the apple logo appears during startup, it
briefly shakes and then becomes pixelated.
That means that the computor is having a problem with your password... It is having problems recognizing your password, which it finally accepts....
george -
Error during startup of portal service after SPS11
Hi Guys,
After installation of SPS11 to our 2004s portal system we have problem with startup of our Portal service.
Before SPS11 we had SPS9 system and everything was working correctly.
Our service is connecting to Database during its initialization.
This is part of our code:
Properties p = new Properties();
p.put("java.naming.factory.initial", "com.sap.engine.services.jndi.InitialContextFactoryImpl");
try
Context ctx = new InitialContext(p);
_ds = (DataSource)ctx.lookup(POOLNAME);
Connection conn = _ds.getConnection();
conn.close();
LogWriter.traceInfo(LogWrapper.trace,"Connection established.");
} catch (NamingException ex)
The error is:
#1.5#000802A2BF4A00580000038200003E3000042C1F016BDC9A#1174411586934#System.err#sap.com/irj#System.err#Guest#2####a813ff20d70611dbbcd7000802a2bf4a#SAPEngine_Application_Thread[impl:3]_27##0#0#Error##Plain###com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SABMILLER.
at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)
at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:344)
at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:254)
at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:271)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at cz.sap.statemanagement.StateLogRetriever.<init>(StateLogRetriever.java:73)
The probleam appears only during startup of portal!
If you deploy service on running portal it is started without any problems.
We tried to apply note (Note 960199 - 2-Phase Init Mechanism for Portal Services is Deprecated) but without success.
This is modification of our portalapps.xml as described in Note.
<service name="StatemanagementLogService">
<service-config>
<property name="className" value="cz.sap.statemanagement.StatemanagementLogService"/>
<property name="startup" value="true"/>
<property name="twophaseinit" value="always"/>
</service-config>
Please could you help us with this problem?
Anyone has an idea what is wrong?
Thanks a lot
OndrejHi Nirmal,
thanks you for your quick response. This is what the installer returns when I use your suggested command:
Mar 7, 2012 2:35:56 PM [Error]: The parameter jce_policy_zip in externally supplied configuration is invalid.
I looked up the parameters for the STARTUP:
rootdir [guiport] [httpport] [guistart] [guimode] [config] [sid] [instanceNr]
Thus the jce_policy_zip is not a valid parameter.
However, after deleting the file specified I could just run STARTUP again and this worked.
Thanks
Marcel
Edited by: M. Rabe on Mar 7, 2012 2:57 PM -
Screen Goes Black During Startup (after login)
Hello,
I have a 2005 Mac Mini PPC OS 10.4.11. This is the first problem I've had since purchasing the computer. This problem popped up out of nowhere. The screen goes black during startup just after I login into my account. I can hear the hard drive spin like it is finishing the startup process. The monitor power button blinks green.
I'm using the digital video cable. I tried switching to the VGA cable but the screen then goes black before the login screen.
The computer will startup in Safe mode.
I've tried Disk Utility (repair disk and repair permissions), Techtool Pro, Drive Genius, ColorSync Utility, Reset Pram, installed latest OS updates, and even re-installed the System twice (once because I removed all the Extension files and then the computer would not startup at all).
I've also tried removing cache files, plist files, startup files, preference files, and some or all of extension files.
The only applications I have recently installed were QuickTime Pro and a .flv movie player; both about a week before this problem started. I tried to uninstall them but could not figure out how.
What is the problem? How can this be fixed?
Thanks.
RichardHowdy. I have Had the same problem as you in regards to a ViewSonic Monitor and the Mac Mini. This is my post:
Monitor failure when switching resolutions
Using Displays with the Mac mini, Apr 1, 2008, Replies: 2
Running 10.5.2 on Mac Mini G4 1.42 Ghz with ATI Radeon 9200, 32 MB VRAM and ViewSonic VX922
When switching resolutions from 1280x1024 to 800x600 or vice versa, the monitor will cut to black and the power light on the monitor switches from solid green to flashing green. Only by combinations of powering down the mini and starting it up again with the monitor on or off will bring the monitor back to life. This problem makes it difficult to play World of Warcraft amongst other games. Any feedback in regards to this problem would be appreciated.
Thank You!
At this point, I am unable to switch Monitor resolutions. If I do, the monitor goes black, and I have to power everything down and wait a while before I can restart.
I've resigned myself to not switching resolutions, but I'm wondering if you've had any luck.
Thanks for your time!
Kevin -
FRM-92101 There was a failure in the forms server during startup
Hi guys when running EBS i am getting this error:
it happens when i try to load any form i.e hrms managemnet --> work structure -> organization
error : FRM-92101 There was a failure in the forms server during startup
this could happen due to invalid configuration
please look into webserver log file for detail
following are the formsweb.cfg file details:
-------------------------------------------------------------------------------start----------------------------------------
[oratest@kapp server]$ vi formsweb.cfg
[oratest@kapp server]$ tail -1000 formsweb.cfg
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/mnt/extdrive/VIS/apps/tech_st/10.1.2/
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=orac
------------------------------------------------------end----------------------------------------------
plz help
regards,
kashifHi Hussein,
i got the error in application log that libXm.so.2 is missing, then i installed openmotif to resolve it, but after that form window is not opening.
and application log is as follows:
10/10/22 18:41:45.258 10.1.3.0.0 Started
10/10/22 18:41:46.981 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/22 18:41:46.993 formsweb: 10.1.3.0.0 Started
10/10/22 18:44:38.873 formsweb: ListenerServlet init()
10/10/22 18:44:40.204 formsweb: Forms session <1> failed during startup: no response from runtime process
10/10/22 18:44:40.206 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 14:57:11.795 10.1.3.0.0 Started
10/10/23 14:57:22.415 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 14:57:22.641 formsweb: 10.1.3.0.0 Started
10/10/23 15:01:33.111 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:05:56.542 10.1.3.0.0 Started
10/10/23 15:05:58.541 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:05:58.652 formsweb: 10.1.3.0.0 Started
10/10/23 15:15:29.23 formsweb: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 15:32:28.558 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:33:44.992 10.1.3.0.0 Started
10/10/23 15:33:46.570 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:33:46.610 formsweb: 10.1.3.0.0 Started
regards,
kashif -
Problem during startup of NWDS - Error while opening NWDS -
Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
at org.eclipse.swt.SWT.error(SWT.java:2330)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
at org.eclipse.swt.widgets.Display.release(Display.java:1782)
at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
... 8 moreHi nayab,
Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit -
My MacBook keeps freezing and crashing during startup and use, what's wrong?
My MacBook functioned perfectly for YEARS, and suddenly it started freezing during startup. One of four things happens: it starts up no problem, it freezes at the apple logo with the load wheel spinning, it freezes at a 'no' symbol (a circle with a line through it) with the load wheel spinning, or it freezes at a logo which is a folder with a question mark in it. It occasionally goes through and gets to the homepage, where I can use the computer for a certain amount of time before it freezes again. I never get to use it for more than 30 or 45 minutes at a time.
Yes, I have updated all my software, and I haven't dropped it or downloaded anything that could cause this issue. What could be going wrong? :(There are corrupted system files involved, so my suggestion is to reinstall OS X.
If you are using Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you are using Leopard or Tiger:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Class not found for Startup servlet
I have deployed a war file under weblogic 7. The application has some startup servlets,
which are failing to load during startup. It returns the following error messages
for each servlet
####<Jan 8, 2003 2:00:25 PM CST> <Error> <HTTP> <abc-web1> <abcAppServer> <Thread-8>
<kernel identity> <> <101249> <[ServletContext(id=3959381,name=abcApps,context-path=/abcApps)]:
Servlet class com.abc.servlets.startup.StartupTSContentDaemonServlet for servlet
StartupTSContentDaemonServlet could not be loaded because the requested class
was not found in the classpath D:\bea\user_projects\abcdomain\abcAppServer\stage\abcApps\abcApps.war;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\servlet2373.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\jbcl2374.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\jaxp2375.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\xerces2376.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\AS4002377.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\decrypt2378.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\cls2372.jar.
java.lang.UnsupportedClassVersionError: com/abc/servlets/startup/StartupTSContentDaemonServlet
(Unsupported major.minor version 48.0)>
####<Jan 8, 2003 2:00:25 PM CST> <Error> <HTTP> <abc-web1> <abcAppServer> <Thread-8>
<kernel identity> <> <101216> <Servlet: "StartupTSContentDaemonServlet" failed
to preload on startup in webapp: "abcApps">
javax.servlet.ServletException: [ServletContext(id=3959381,name=abcApps,context-path=/abcApps)]:
Servlet class com.abc.servlets.startup.StartupTSContentDaemonServlet for servlet
StartupTSContentDaemonServlet could not be loaded because the requested class
was not found in the classpath D:\bea\user_projects\abcdomain\abcAppServer\stage\abcApps\abcApps.war;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\servlet2373.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\jbcl2374.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\jaxp2375.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\xerces2376.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\AS4002377.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\decrypt2378.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\cls2372.jar.
java.lang.UnsupportedClassVersionError: com/abc/servlets/startup/StartupTSContentDaemonServlet
(Unsupported major.minor version 48.0)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:785)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:2763)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:2708)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:2681)
at weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:552)
at weblogic.servlet.internal.WebService.preloadResources(WebService.java:476)
at weblogic.t3.srvr.ServletInitRunner$1.run(ServletInitRunner.java:50)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:46)
at java.lang.Thread.run(Thread.java:479)
When i look into the directories weblogic created after deployment, there is a
cls2372.jar at 1 level above the web-inf folder and it has all the servlets in
the correct package structure i.e. com/abc/servlets/startup
Any idea on why this is happening or what i am doing wrong?also posting to servlet newsgroup.
"Ram" <[email protected]> wrote in message
news:[email protected]...
>
I have deployed a war file under weblogic 7. The application has somestartup servlets,
which are failing to load during startup. It returns the following errormessages
for each servlet
####<Jan 8, 2003 2:00:25 PM CST> <Error> <HTTP> <abc-web1> <abcAppServer><Thread-8>
<kernel identity> <> <101249><[ServletContext(id=3959381,name=abcApps,context-path=/abcApps)]:
Servlet class com.abc.servlets.startup.StartupTSContentDaemonServlet forservlet
StartupTSContentDaemonServlet could not be loaded because the requestedclass
was not found in the classpathD:\bea\user_projects\abcdomain\abcAppServer\stage\abcApps\abcApps.war;D:\bea
\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381
\jarfiles\WEB-INF\lib\servlet2373.jar;D:\bea\user_projects\abcdomain\.\abcAp
pServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\jbcl2374.j
ar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApp
s_3959381\jarfiles\WEB-INF\lib\jaxp2375.jar;D:\bea\user_projects\abcdomain\.
\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\xerc
es2376.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApp
s_abcApps_3959381\jarfiles\WEB-INF\lib\AS4002377.jar;D:\bea\user_projects\ab
cdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF
\lib\decrypt2378.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdel
ete\abcApps_abcApps_3959381\jarfiles\cls2372.jar.
java.lang.UnsupportedClassVersionError:com/abc/servlets/startup/StartupTSContentDaemonServlet
(Unsupported major.minor version 48.0)>
####<Jan 8, 2003 2:00:25 PM CST> <Error> <HTTP> <abc-web1> <abcAppServer><Thread-8>
<kernel identity> <> <101216> <Servlet: "StartupTSContentDaemonServlet"failed
to preload on startup in webapp: "abcApps">
javax.servlet.ServletException:[ServletContext(id=3959381,name=abcApps,context-path=/abcApps)]:
Servlet class com.abc.servlets.startup.StartupTSContentDaemonServlet forservlet
StartupTSContentDaemonServlet could not be loaded because the requestedclass
was not found in the classpathD:\bea\user_projects\abcdomain\abcAppServer\stage\abcApps\abcApps.war;D:\bea
\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381
\jarfiles\WEB-INF\lib\servlet2373.jar;D:\bea\user_projects\abcdomain\.\abcAp
pServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\jbcl2374.j
ar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApp
s_3959381\jarfiles\WEB-INF\lib\jaxp2375.jar;D:\bea\user_projects\abcdomain\.
\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF\lib\xerc
es2376.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdelete\abcApp
s_abcApps_3959381\jarfiles\WEB-INF\lib\AS4002377.jar;D:\bea\user_projects\ab
cdomain\.\abcAppServer\.wlnotdelete\abcApps_abcApps_3959381\jarfiles\WEB-INF
\lib\decrypt2378.jar;D:\bea\user_projects\abcdomain\.\abcAppServer\.wlnotdel
ete\abcApps_abcApps_3959381\jarfiles\cls2372.jar.
java.lang.UnsupportedClassVersionError:com/abc/servlets/startup/StartupTSContentDaemonServlet
(Unsupported major.minor version 48.0)
atweblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.jav
a:785)
atweblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletC
ontext.java:2763)
atweblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServlet
Context.java:2708)
atweblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServle
tContext.java:2681)
atweblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:552)
atweblogic.servlet.internal.WebService.preloadResources(WebService.java:476)
at weblogic.t3.srvr.ServletInitRunner$1.run(ServletInitRunner.java:50)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:744)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:46)
at java.lang.Thread.run(Thread.java:479)
When i look into the directories weblogic created after deployment, thereis a
cls2372.jar at 1 level above the web-inf folder and it has all theservlets in
the correct package structure i.e. com/abc/servlets/startup
Any idea on why this is happening or what i am doing wrong? -
IMac keeps shutting down during startup loading bar under apple sign
My electricity went out and came back on a minute later. When my computer started up again the font was back to original factory setting. I then restarted my computer and every time it would load up it would shutdown. The computer chimes and then reaches a grey screen with an apple sign. Below it is a loading bar. This bar loads about 10% then goes back down and loads from 0%. A couple minutes later it shuts down after staying at 0%. It keeps doing this routine every time I start the computer. I then did a command s and rebooted the computer to factory reset it. The computer still shuts down and has the old habit of reaching 10% and 0% with the loading bar but now after the loading bar is at 0% it then disappears to the Apple sign and a loading circle. It then shuts down again. This iMac was originally 10.6.8. but i believe i updated it to 10.9.4 and was purchased new around 2008. I also tried to put in a CD with Firmware Restoration CD 1.7. but that didnt work. Can anyone help? or has anyone had similar issues?
Hello canwary
Good job on troubleshooting your issue so far. For most issues that deal with your Mac not starting up, consult the article below to see what the issue could be.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/TS2570
Let me know if this helps,
-Norm G.
Maybe you are looking for
-
How can I delete all my songs from my Creative Zen Micr
Hi, I have one of the older pink creative zen micro's and I want to delete all of my songs from it as most of them are really old and I want to put some new ones on there. However, I have recently got a new computer so lost my installation of the zen
-
Portal forms connecting to each other in tabbed page
Well, here's a challenge...for me anyway. If the forms are created and they are published as portlets and in the tabbed page, is there a way to get the user to fill out 1 form and be passed automatically to the next? I haven't done this before, but a
-
SharePoint 2010 creates a new instance for SharePoint server.
I have installed SP 2010.My env is Windows server 2008 R2 and SQL 2008 r2 (10.50.1600). When I install the SP 2010, configuration wizard (Start the SharePoint Products Configuration Wizard) directly goes to configuration wizard and installed SP 2010
-
Recording My Electric Guitar - Sorry New
Greetings. I'm sorry for the very easy question. But I was wondering how I go about plugging my electric guitar into my computer/ Remote 25SL Compact Keyboard Controller. Any answers will be greatly appreciated.
-
Shortcut key to select between languages in Yosemite
I would like to know the short cut key or create a custom short cut key to select between the two languages (English and Tamil, in my case). Since Command+Spacebar is used for Spotlight search - which is essential to me - I need to know how to overco