Vibration alert not worked

sir After IOS 7 updation my phone vibration alerts not worked

The battery probably is dead. LiIon batteries last from two to six years, depending on usage and how deeply it's been discharged.
The vibrating alert is probably going to be a simple fix. One of the wires are probably just loose and needs re-soldering. If you're comfortable with soldering electronics and opening the device, I suggest you just open the device and solder the wire(s) back yourself. Or, you can send it to Chris Short or http://www.usedpdaparts.com for a small fee and they'll fix it for you and make sure everything is working as it should.
Post relates to: Tungsten T5

Similar Messages

Vibration is not working in ios7

After updating to ios7, the vibration is not working in my iphone4s, i have checked after disabling the Do not disturb mode.

I have a couple apps that have been in the marketplace for quite some time. Now with iOS 7 there have been some bugs reported. I am trying to rebuild them in XCode 5 with a iOS 6 target. However, I have some serious problems with the StoreKit. The first App always returns "Cannot connect to iTunes" when I try to test an In-App purchase on my iOS 7 iPad. With my second App, the In-App purchase seems to work, however I never get any responses using NSNotificationCenter. "productPurchased" and "productPurchaseFailed" never get hit. I created test users and I believe they are valid. I logged out of iTunes on the device. Does anyone know what might have caused this to stop working for me? I have made no other changes to my code. I am only trying to run it in XCode 5 on an iOS 7 device. Thanks for any help someone might be able to provide!

Why are my alerts not working?

Why are my alerts not working? Sometimes the alerts work and other times I have to manually retrieve messages.

You can set alerts at verizonwireless.com, and you can set alerts on most smartphones as well, and those can be highly customized as to when you are alerted.
Go to settings, data usage, and there are/should be options to view, limit, and alert you as to your mobile data usage on the phone itself.

Vibration ANE not work at iPhone5+iOS7 environment

Hi,
I'm creating an iPhone application using Flash CS6 + Adobe AIR for iOS version 3.9.
Have been using (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html) native extension for vibration,
but not work at iPhone5+iOS7 environment.
* I confirm the work with iPhone4S+iOS7 environment.
For example, for the following items, and when it was found to cause something,
I think I'm afraid very much and if you can teach.
-iPhone5 might differ from where you want to enable vibration on the terminal side setting in iOS7 environment
-iPhone as apps, there is a point that implementation in the environment is different
-AIR have the necessary set for use in vibration for iOS

I beleive I have solved this. My router had a setting for Proxy filtering on ports 80, 8000, 3128, and 8080. Turning this OFF allowed updates to work. I can now update idevices from home.

6300 & Lotus Notes - Calander Alert Not Working

Hi I have an O2 6300 & Lotus Notes ( v6 )and the phones calander alert not working / going off when it should.
I've not changed any thing that I am aware of from the defaults and its less than a week or two old so I'm hoping its not a software OS bug and a user issue / some thing I have to switch on some where.
Can any one help me ?
Terran
( PS I noticed some N95 users had the same prob last year )

Hi SaikatDas,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation
Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based on your issue, it is related to the IIS, so I’m afraid that it is not the correct forum for this issue. therefore, I suggest you can post this issue directly to the IIS forum:http://forums.iis.net/
, maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My iphone 4s vibrate is not working pleaz tel me wat can i do

My iphone 4s vibrate is not working pleaz tel me wat can i do

it is not working i do evrey thenk ho can i download vibrate software for my iphone 4s ?

IPhone 6 Plus LED alert not working.

I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Vibration Mode Not Working

I have Pearl 8130 that is approximately 13 months old (just out of warranty of course) and the vibration mode quit working. The day that it quit working I received a call in the morning and it worked. That afternoon no more vibration it had been on my belt the entire day and not dropped.
I have contacted my service provider and they helped me through several steps.
1. Hard reboot.
2. New operating software.
3. Checked profile to make sure that the vibration alert was active.
4. Created a new profile making sure that the vibration mode was active.
I am sure we tried some more things but right now I cannot remember what that might have been.
Does anyone have any idea of how to correct this problem???
Should I contact Blackberry and see if they can help me out?
Thanks

You will need a USB connection to your phone and the Nokia Software Updater. More on that here : http://europe.nokia.com/softwareupdate

E52 msg alerts not working

            Hi, I bought a nokia e 52 phone on 7th october.my phone was fine for the first few weeks nd then the message alerts stopped working.The problem is the message is recieved in the inbox but the phone does not show that it has recieved a message.This is happening in all profiles.If it is in general and outdoor profiles there is no response from the phone,even in silent it does not vibrate.To solve this problem t have to restart my phone everytime when this problem occours.this problem was not there for me before the software update.
             can any one help me out with this please.i have tried doing reinstallation of phone software with nokia software updater.But that dint solve my problem. one more problem is that phone gets hung up when i answer a call.My phone comes back to normal state after a while.hope nokia will soon give a software update nd resolve the problems.
             when i took it to nokia priority those guys were like evrything is fine.but still the problem persists.can any one help me out in this?

Do you have a very high no. of messages stored in the phone ? If so delete max. possible.. Incude all the sub-folders in the 'Messaging' folder..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Pantech Hotshot Alerts Not Working

I recently started using our son's Pantech Hotshot and cannot get the alarms and calender alerts to work. The volume is at max and there is a specific tone selected for each. I have taken out the battery and took off the vibration for the alerts. It still is not working. Does anyone have any suggestions? Thanks.

Hello WhiteDrone,
Are you still experiencing this? If you are please PM me your name, mobile number and best contact number so I can further assist you. Thank you.

Level 1 Alerts Not Working On BB Pearl.......Please help!

Hi all,
I used to have level 1 alerts on my BB to notify me of special emails that I needed to respond to urgently. Recently my company got acquired and we changed over to a new Exchange Server with a new Enterprise Activation (which wiped my BB completely before restoring all the data again).
In the process, I lost all my level 1 alerts. I installed Desktop Manager (4.2) and tried to setup again using my old .rfi files but this has not worked. The Desktop Manager confirms all ok but when I test my BB does nothing at all. Originally I would have had a special tone (Sonar, I love that tone! Sad I know!) and the BB would vibrate and the messages would be in RED. Now, nothing happens. I have set the level 1 messages to Sonar & Vibrate but nothing happens (and it's not on mute!).
I have also downloaded Desktop Manager 5.0 to see if that does anything but that's not working either.
I'm hoping that someone else has had this issue in the past and has overcome it by doing something simple that I have overlooked. Can anyone help? I'm quite desperate.
Many thanks for your help.

You might wanna search for the thread where I asked for a SelctCmDevices example.. then use that as a starting point. That's how I finally managed to get things working on my CCM 5.1 and 6.1.

My vibrate does not work on my iphone 4

My vibrate function does not work on my iPhone 4. Does anyone have any information on this or solution to the fault??
Any feedback is much appreciated.

http://www.apple.com/retail/
make a reservation on top tool bar
do a back up as if faulty Apple will exchange and your device will go

Ringtones and BBM alerts not working

Hi, I have created several custom ringtones and phone alerts on both mine and my husbands new BB 9320's . These were working just fine for the first few weeks but now the custom BBM alerts will not work on my phone but the custom ringtones do work. Instead of the custom alert I've selected the alert sound for the normal profile is the one that sounds. However the custom alerts DO work for text messages ! Just not BBM !
My husbands phone has the exact opposite problem, BBM alerts work, ringtones don't !
The problem seems to have happened after I had installed some various Apps . So I uninstalled all those apps and I've done both a soft reboot and battery pull on each phone trying to fix this. I also deleted those contacts and their custom alert set-ups and re-added everything from scratch, rebooted again, still nothing. It's been like this for a few weeks now, I just can't figure it out . Please help !

Hi and welcome to the forums!
The media cache might be corrupted, here's a fix.
Thanks,
Bifocals
KB26203 BlackBerry smartphone ringtones will not play
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Sound alerts not working in Mail and Ichat apps since upgrade to 10.4.9

I just noticed my Sound alets not working in Mail and Ichat apps since upgrade to 10.4.9.
I'm using soundsticks which is playing sounds thru quicktime, itunes, etc but my alert sounds for getting new emails and IM messages is not working. I get the quick "white flash" on the screen instead. I checked the prefs on both apps and it is set to give me the alert sound, I can even test it in the ichat pref when I change the new message alert sound it will play it thru my speakers but when I get a new message in either app it just gives me the white flash.
I'm read that it can be an issue of not having the balance in the system sound pref set the middle, so I checked that, restarted, all that but still no luck.
I really like the sound alert features because I can be in another part of my house, turn the sound way up and I'll know when one of my clients is trying to reach me but now I can't do that.
Any ideas?
Thanks in advance!
Brown.Recluse

Ok, weird, strange...did ONE more restart and now its working fine...who knows?
Me

Alerts not working when formula is in the cell

I am having a problem where my alerts are not working in the preview mode. They work fine when I hard code the alert range. But I need the alert to change under differnt conditions and I am using an IF statement
the formula is simple
=IF('TXF Inputs'!D27=3, C34/2, C34)
output is either 0.375 or 0.375/2 = 0.1875
if i hardcode the cell with either of these values the alert works, but it does not work with the formula. The confusing part is that I have other alerts that have IF statements in them and they all work.
They also work fine in the main screen, ie it shows yellow if my default values =0.1875, but then when I preview or publish they don't work
bw

Can u give us the details like which component you are using for alerts.

Vibration alert not worked

Similar Messages

Maybe you are looking for