Vibration and sound stops working
Randomly my phone will stop vibrating or using sound and then it'll come back on again like 5 minutes later. I've noticed that sometimes it will occur while typing using the SwiftKey app, but at other times it just happens without me even using the phone. Very very annoying as this caused me to miss an alarm a few days ago.
Check your Voice settings if you haven't, Go to settings then Voice or Sound.. And try this do a Power cycle if you don't know the procedure, It goes like this Power + Volume key try lower if that don't work try upper volume.. let me know if things get restored after trying that. b33
Member Since: November 13, 2010
Similar Messages
-
Iphone4s updated to iOS 6.1.3 and sound stopped working
I have updated my Iphone 4s to iOS 6.1.3 and right away sound stopped working. Is anyone else facing this issue? When I open siri i can hear the sound that means speakers are good. Looks like something is wrong with iOS 6.1.3 update. When headphones are connected then sound is ok.
Pleae let me know if there is any work around.I have the same problem....no sound after updade
-
4.2.1 Update and Sound Stopped Working
I was watching Netflix tonight and a request for update appeared. I did the update and then had no sound. I tried to restart the ATV and still no sound. I did a reset and then did a roll back to factory settings and still no sound. I made sure the HDMI cable was seated correctly.
Netflix server problem from what i can find out.. compatibility issue.
-
Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.
Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.
-
I updated my ipad and the sound stopped working.
I updated my ipad to IOS 8.1.and the sound stopped working. My sidebar buttons say soundeffects or soundeffects mute when I press them. On my control panel there is no sound bar. As you can see in this screenshot it is not showing a sound bar to adjust volume. HELP?!
Update: Last night, I cleaned my headphone port & docking port. Reset Network Settings & General Reset all settings & reset ipad. Didn't work immediately & had some setbacks. I decided to wait to do the restore factory default for the next day, this morning. I decided to test the sound before proceeding. My sound is working correctly now & didn't need to resort to the restore factory default. All of the above worked but perhaps needed over night to really dry the rubbing alcohol used to clean the ports.?
sound is working. Thanks so much for your help Diavonex! -
Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please
Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario -
Why does the sound for my iPad lock and keys stop working
Why o the sounds for my iPad lock and keys stop working?
1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg -
Mac Mini sound output and superdrive stop working randomly
Every once in a while the sound stops working and when I check the sound preferences it says no output devices are connected, even when I've got stuff plugged in. Doesn't recognize the built in speaker either. This has been happening for a while, but the most recent time I had tried to read a DVD and it wouldn't show up, and wouldn't come out of the drive when I hit the eject key. System Profiler wasn't recognizing the drive either. I fixed all this by shutting down and disconnecting all the cords from the back, as has worked for the sound problems before, but this doesn't seem to fix it permanantly. The sound problems seem to have started when I installed a security update a week or 2 ago, not sure about the superdrive problems. Anybody got any ideas?
I am having this same problem. It just started this morning (August 19th). No sound was coming out and the headphone jack in the back was lit up red. When I plugged the headphones in, sound came out of there. I unplugged them and sound came out of the computer as usual...but only for a minute or so, then the same problem. Nothing works in changing preferences either. Has anyone had any luck with this problem?
-
Imac's Sound and Mic stopped working!
Last night my Imac's sound stopped working. Internal speakers don't work, plugging in external speakers don't work. I thought this was just a hardware problem, but my internal mic also doesn't work, which is on the other side of the computer....
I've rebooted many times, cleared the pram, checked my preferences, played with the audio midi controls, plugged and unplugged the cord in the line out and did everything besides dance around the mac singing.
Any suggestions on how or why this would just stop working? It has to be something i'm missing, some setting.
I've downloaded Line In, didnt do anything. I downloaded Sunflower, didn't do anything.
The only thing I can think of is I just loaded Parallels and Win XP, but I just uninstalled it and still no solution.
Help please!!ok let me help you with this process, go to the system preferences in your OSX go to the icon Sound click on it internal volume should be all the way up or mid high up Output volume either all the way up or mid way up thats in the input tab on the top. Now the output tab should the balance should be in the middle and output volume should be mid or all the way up . If that is not the case then there could be a hardware problem which I doubt because when the computer is off it creates a connection from line in to line out.
-
I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.
Now it is not working even with fliping, is the problem with hardware or software?
Is any soloution to solve the problem?The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
Yogurt spilled on my macbook air and now sounds stopped working. Pls help
Hi!
So mac and yogurt were inside my bag and the yogurt's lid accidentally opened getting into my mac's charger, usb and headphones port. I tried turning it on and everything seemed fine, sounds and the heaphone port were both working but the usb port wasn't so i just wiped away the yogurt. After wiping everything I could see off, i tried connecting my mac to the power and it's working. Usb port not working tho and the sound stopped working, tried connecting a headset and still not working. Those seem to be the only problems. Right now my mac's open and standing to it's side near the heater to dry. What should I do? :(Right now my mac's open and standing to it's side near the heater to dry.
Yes, everyone tries the "dry it out" method, doesnt work,... when it does 'work' it works for a while until corrosion sets in. Make a service call.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement. -
My sound stopped working on my HP dv6-1280us
Its only a couple of months old but my sound stopped working. I don't know much about laptops but here is what I do know.
It stopped working around 10 days ago. At first there was no sound but I could move the volume up and down with the quicklaunch pad and the mute button would go from red to blue when touched. I checked to make sure nothing was muted and everything seemed to be fine.
I googled the problem and it said to do a system restoration back before it stopped working. I tried several times and it went through the process but then when it rebooted it said that it didn't work and that none of the settings have worked.
Then a couple of hours ago I noticed the mute button is now red and won't change to blue the volume slider is not responding to touch either.
Then I saw a post on here that said to go to system recovery and reinstall the sound drived (IDT High Definition CODEC) and I did and it said it did but it didn't fix the problem.
I am lost and would love some help if anyone has any ideas? please?
Thanks
Amy
This question was solved.
View Solution.I got some help from a friend and her advice worked. I thought I would post this for others having trouble
Well I guess you could try this it would not hurt. Assuming you use Windows that is.
Go to run and type services.msc when the box pops up scroll down to Windows Audio and double click. Make sure that the service is started. -
Iphone sound stopped working after ios 6.0 update
My 4s was working fine until I updated to 6.0. After that, my sound stopped working. If I plug in headphones it works, but as soon as I unplug it stops. When I plug into my USB sync cable it works, but when I unplug it stops working. I updated through user settings over wifi and not through itunes sync if that makes any difference. I know other people are experiencing similar problems. Any help would be appreciated.
Yes rev, I tried the dock cleaning as well, I didn't help me either. I read and tried everything others did-no luck. I'm guessing these are the facts, either it will quietly get fixed on an update or the % of phones with the problem compared to those that don't doesn't warrant attention and is better addressed through Apple by just replacing it..if it's still under warranty.
-
The sound stopped working on Mac Book Pro OS X?
The sound stopped working. Firefox installed updates and since, the sound is disactivated. I went to preference, and the silence box is checked, but it doesn't allow me to uncheck it. The sound peripheric is not recognised it seems. What can I do?
Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Make sure Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so uncheck it.
Option click the speaker icon, if present and select Internal Speakers.
6. Launch iTunes and play a song. Adjust the volume there.
Best. -
KM2M + WIN XP sound stops working after a few minutes
as in subject i have a KM2M COMBO-L (MS 6738) MoBo with athlon xp 2000+ and 128 MB spectek PC2100.
The problem is that the sound stops working after some minutes of use.
It's the same problem in all the 10 PCs of my webcafeKM2M uses the Realtek ALC650 CODEC. Are you using the VIA Audio driver or Realtek? It should say under audio properties.
I recommend the Realtek drivers.
Of course, if you are already using the Realtek, then I recommend the VIA drivers.
Pretty insightful, eh?
Maybe you are looking for
-
Cannot send email with new ios5 on iphone 4
my email can recieve but cannot send ever since I downloaded ios5 the other day, please help.
-
Oracle 10g OCI based application talking to an Oracle 9i database
Hi all, Got a question. I have an OCI C++ application that is written using the Oracle 10g OCI includes, etc ... This of course is running on a 10g client. The client OS is actually a Windows x64 system since 10g is the only native OCI client right n
-
Dispalying ME23N w.r.t the EBELN
Hi Folks, I am doing an interactive report where at the level of list 4 I have to call ME23N w.r.t the EBELN I had displayed in list 3. loop at iekpo. iekpo-ebeln hotspot on, hide iekpo-ebeln. endloop. if sy-lsind = 4. call transaction 'ME23N' and
-
Padding with zero according to field size!
Dear All, I want to add leading zeros, as per numeric column width while selecting data through sql query. Kindly let me know how to do this. For example if in a table there is field empID number(3) Now if the data is 1 23 999 45 7 The result i shoul
-
My New I-Pod Pouch 5 Is Stuck With A Screen With A USB Pointing Up To An I-Tunes Logo HELP
I Bought My Grandson A I-Pod Touch 5 & It's Stuck With A Screen That Shows A USB Wire With An Arrow Pointing Up To A I-Tunes LOGO, Cannot Get It To Do Anything??? Help Please <> Thank :-)