Vibration ANE not work at iPhone5+iOS7 environment

Hi,
I'm creating an iPhone application using Flash CS6 + Adobe AIR for iOS version 3.9.
Have been using (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html) native extension for vibration,
but not work at iPhone5+iOS7 environment.
* I confirm the work with iPhone4S+iOS7 environment.
For example, for the following items, and when it was found to cause something,
I think I'm afraid very much and if you can teach.
-iPhone5 might differ from where you want to enable vibration on the terminal side setting in iOS7 environment
-iPhone as apps, there is a point that implementation in the environment is different
-AIR have the necessary set for use in vibration for iOS

I beleive I have solved this.   My router had a setting for Proxy filtering on ports 80, 8000, 3128, and 8080.  Turning this OFF allowed updates to work. I can now update idevices from home.  

Similar Messages

  • Vibration is not working in ios7

    After updating to ios7, the vibration is not working in my iphone4s, i have checked after disabling the Do not disturb mode.

    I have a couple apps that have been in the marketplace for quite some time. Now with iOS 7 there have been some bugs reported. I am trying to rebuild them in XCode 5 with a iOS 6 target. However, I have some serious problems with the StoreKit. The first App always returns "Cannot connect to iTunes" when I try to test an In-App purchase on my iOS 7 iPad. With my second App, the In-App purchase seems to work, however I never get any responses using NSNotificationCenter. "productPurchased" and "productPurchaseFailed" never get hit. I created test users and I believe they are valid. I logged out of iTunes on the device. Does anyone know what might have caused this to stop working for me? I have made no other changes to my code. I am only trying to run it in XCode 5 on an iOS 7 device. Thanks for any help someone might be able to provide!

  • Vibration not working in Iphone5

    My Iphone5 vibration is not working both modes : in Slient and in Ring & vibrate.. Kindly advise?

    I have the same problem, with my brand new iphone 5, in this moment I trying to restore, and i guess that the problem solves

  • Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

    Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
    SELECT po_header_id, segment1, type_lookup_code
    FROM po_headers
    WHERE segment1 = '5000002'
    Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
    EXEC mo_global.set_policy_context('S',129)
    But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
    ===========
    I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
    I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
    Please suggest. Appreciate your response.
    Thanks,
    Kesava Chunduri

    Hi Hussein,
    Thanks for the quick response.
    Yes, I've gone thru both the notes specified below:
    Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
    - Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
    - For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
    I am able to create the receipt, when i remove this profile option.
    No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
    - I see that the products i am running these reports from AR/GL - already exists in these tables.
    Anything other options??
    Thanks,
    Kesava

  • (Substitution Variables) not working in "SQL Developer" Environment !!!!!!!

    this photo illustrate how that (Substitution Variables) not working in "SQL Developer" Environment :-
    http://www.imagehosting.com/show.php/1555180_ddddd.PNG.html
    any solve for this problem ?????!!!!!!!!!!

    There is a dedicated forum for SQL Developer related questions
    SQL Developer
    I should admit however, that query you have provided ( with substitution variables) works like a charme in my environment (SQL Developer 1.1.0.23 build 23.64)
    Best regards
    Maxim

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • My iphone 4s vibrate is not working pleaz tel me wat can i do

    My iphone 4s vibrate is not working pleaz tel me wat can i do

    it is not working i do evrey thenk ho can i download vibrate software for my iphone 4s ?

  • Outgoing icloud email not working on iphone5, ipad and mbpro.

    Outgoing icloud email not working on iphone5, ipad and mbpro.
    Get message - Outgoing server failed.
    Problem started last night.
    I'm in Northern California.
    Never had this problem before, dont know what to do next.

    I still can't make it work on the iPhone5 or iPad.
    I can't figure out how to switch outgoing servers on the iP5 or iPad.
    On the MBPro I can use a different outgoing server and it works.
    Here's another threrad on the topic: https://discussions.apple.com/message/25446573#25446573

  • Safari not working on iphone5

    Safari not working on iphone5 I have rest my network settings still not working also my gmail is not working

    After upgrading to iOS 7 some of the settings on the phone remain from the iOS 6. To resolve the issue you will go to Settings > General > Reset and select "Reset All Settings" that should address the issue you mentioned about Safari and also any other potential incompatibility between the iOS 7 and settings.
    Hope this helps.

  • My vibrate does not work on my iphone 4

    My vibrate function does not work on my iPhone 4. Does anyone have any information on this or solution to the fault??
    Any feedback is much appreciated.

    http://www.apple.com/retail/
    make a reservation on top tool bar
    do a back up as if faulty Apple will exchange and your device will go

  • My hands free is not working after the ios7 upgrade, any solutions?

    I was paired and working fine with the blue tooth in my 2012 FJ Cruiser, after all of the ios7 upgrades it is still not working, kept thinking 7.0.2 thru 7.0.4 would have the solution but nothing yet. Has anyone found a solution?

    Hi, ramt14. 
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article you may find helpful when experiencing this issue.
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Cheers,
    Jason H.

  • Jms is not working properly in clustered environment

    Hi all,
    i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
    we are using the jndi.properties as follows ...
    java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
    java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
    java.naming.security.principal=oc4juser
    java.naming.security.credentials=oc4juser
    oracle.j2ee.rmi.loadBalance=lookup
    we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
    i have seen that for every instance there one jms server. at runtime it is taking one application servers services
    say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
    here jms is not working properly when i send message
    As we have clustered environment message must be propagated all the applications who use above jndi.properties.
    if i keep use only one application server opmn say
    java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
    then its is working excellently
    please can u provide any solution ASAP
    thanks in advance
    Manu

    Dear Aravindth
      (.*?) means -> Select all contents from where you start and end,
    For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
    (?) Match zero or one occurrences. Equivalent to {0,1}.
    (*) Match zero or more occurrences. Equivalent to {0,}.
    (+) Match one or more occurrences. Equivalent to {1,}.
    (.) (Dot). Match any character except newline or another Unicode line terminator.
    (.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
    Could you please refere the below cite :
    http://www.javascriptkit.com/jsref/regexp.shtml
    Thanks & Regards
    T.R.Harihara SudhaN

  • Screen not working for iphone5

    The touch screen is not working for my iphone5 and there are dashes running across the top of the screen. I have already tried a soft reset a couple of times and still the screen will not work and dashes continue to flicker across the top of the screen. Any idea on what I can try?

    Try holding down the power and home button until it turns off. If not try fully restoring it from your laptop. It may require you to update as well

  • Flash not working in 64 bit environment on 4b9

    After testing on Adobe's website and others, flash is definetly not working on 4b9 64 bit, but it does on 32 bit environment. It's also perfectly working with safari.

    Adobe Flash "Square" is a 64-bit beta version of Adobe Flash.
    [http://labs.adobe.com/downloads/flashplayer10_square.html]
    It brought flash back to Firefox 4b10 on my 64-bit macbook with Mac OS 10.6.

  • Vibration Mode Not Working

    I have Pearl 8130 that is approximately 13 months old (just out of warranty of course) and the vibration mode quit working.  The day that it quit working I received a call in the morning and it worked. That afternoon no more vibration it had been on my belt the entire day and not dropped.
    I have contacted my service provider and they helped me through several steps.
    1. Hard reboot.
    2. New operating software.
    3. Checked profile to make sure that the vibration alert was active.
    4. Created a new profile making sure that the vibration mode was active.
    I am sure we tried some more things but right now I cannot remember what that might have been. 
    Does anyone have any idea of how to correct this problem???
    Should I contact Blackberry and see if they can help me out?
    Thanks

    You will need a USB connection to your phone and the Nokia Software Updater. More on that here : http://europe.nokia.com/softwareupdate

Maybe you are looking for

  • Extended search problem in SRM

    Hi, We have a problem with extended search in SRM while checking the status. In Status If I have selected 'Awaiting approval' and clicked on start button, now it is showing all the SC of awating approvals status. If I have selected 'In approval inbox

  • SVG Viewer for a Vista-PC

    Hi everyone, i just got a new notebook running with vista. in the apex-apps there are some SVGs but as i have seen there are no vista support by adobe; even worse they will end this service at the end of the year. Due to adobe this wouldn't be necess

  • Firmware for 6233 RM-145 CODE:0539282

    Hello Is there any new firmware for 6233 RM-145 CODE:0539282 ? I have V3.70 and V3.70 language pack. There is no new update on Nokia Software Updater. Please help. Filip

  • Flex 4 ToggleButton selected property not working

    I am trying to set a FlexToggle buttons selected property by state value and it does not work. It only works when I click on the button. <buttons:MaxRestoreToggleButton id="resizeWindowButton" selected="false" selected.maximized="true"/> any ideas?

  • Adding functionality to existing buttons, not overriding

    Hi, I have a toolbar that I created that has some new buttons as well as some of the already existing buttons in acrobat. I know we can use AVSetExecuteProc() to set the functionality of the buttons. For the already existing buttons, is there some wa