Vibration Doesn't work with incoming Calls

On my iphone4 when I turn my Vibration ON it doesn't repond to normal calls, but it respond to rest. tried everything else except Restore. I dont want to restore coz I need all my messages, and other data. any ideas?????

Thank you so very much.
. Simple yet perplexing.. I bought the waterproof case and had them put it on before leaving the store.. GRANTED, I never read the instructions.. Just knew it must have been something in the way I programmed the phone. I especially loved that you put up an illustration with your explanation.
Mahalo,
Donna Jo

Similar Messages

Ringer doesn't work for incoming calls

My iPhone 4 ringer won't work for incoming calls. It is not on vibrate only and the ringer works through the earphones when earphones are connected. Any suggestions?

Thank you so very much.
. Simple yet perplexing.. I bought the waterproof case and had them put it on before leaving the store.. GRANTED, I never read the instructions.. Just knew it must have been something in the way I programmed the phone. I especially loved that you put up an illustration with your explanation.
Mahalo,
Donna Jo

Volume keys will not work with incoming calls on headphones

So the headphone that came with my iPhone 4s, and others of the same type I have used, will not allow me to lower the volume of the caller. I would be listening to my music or something, it could even be at 50% volume, however the incoming call pushes it to 100% and will not allow for my headphone or iPhone volume control turn down the call. I have to unplug my headphones and just talk on the phone its self in order to turn down the volume.
This problem was first noticed in iOS 6, and is contiued into iOS 7. I do not recal it happening in iOS 5.

TTY was on after going through the settings one by one. They need to explain what TTY is within the settings menu. I have been useing TTY for 2 years now not knowing it.

ChooseFromLists doesn't work with service calls (FormId 60110)

Hi,
I use this code for every marketing document and for the activities. In all Forms it works but not in the service calls. What is going wrong?
best regards
Horst
If ev.FormType = 60110 And ev.EventType = SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST Then
                     If ev.ItemUID = "14" Then
                If ev.InnerEvent And ev.BeforeAction = True Then
                    BubbleEvent = False
                    oForm = SBO_Application.Forms.Item(FormUID)
                    oCFL = oForm.ChooseFromLists.Item("2")
                    oCFL.SetConditions(Nothing)
                    oCons = New SAPbouiCOM.Conditions
                    oCons = oCFL.GetConditions()
                    If 0 = oCons.Count Then
                        oCon = oCons.Add()
                        oCon.Alias = "SlpCode"
                        oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
                        oCon.CondVal = oSales
                        oCFL.SetConditions(oCons)
                    End If
                    BubbleEvent = True
                End If
            End If
        End If

Hello,
Service call is a special type of form (Different from marketing documents) That's the reason why it is not working.
It will not work
To do:
1. Create an editbox , connect to the OSCL.cUSTOMER Fields, and define your CFL over it.
2. Hide the original item "14"
Regards,
J

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

Fixed the problem. Got the Iphone 5

Contact names not showing with incoming calls!!!

Hi all,
I just got my E71-1 yesterday and upgraded from a very effiecient E61i....everything was going smooth until all of a sudden, contact names stopped appearing with incoming calls and SMS's.
I went through the forums searching for a solutions and apparently alot of people experienced the same thing.....except in my case, I do not have any duplicate names or numbers!!!!
Any ideas what could solve this???

There is a fix for it but you won't like it. I have tried it a few times and it always works but it involves a lot of work. This is what you do.
1. Make a backup of nothing else but your contacts only.
2. Delete all your contacts from both phone and sim card.
3. Start by entering the troublesome contacts from scratch making sure not to duplicate any numbers.
4. Now get those people to ring you to make sure that your CLI is working fine.
5. If it works then start entering the rest of the numbers, once again making sure there is no duplication whatsoever.
6. If it doesn't work, just restore the backup you made of your contacts.
I am fairly sure it will work, but just in case it doesn't you can always restore your backup and you are back to square one.

C2-01 doesn't recognise numbers incoming calls (wi...

Hello,
Context of the problem:
In our company we get a basic phone with split bill system. This works exactly as a normal phone but the provider puts each outgoing call in 2 groups; normal is at your own expense, or at the expense of the company when you put a "2" in front of the normal number.
For example when I dial "0475666777" I pay for it, when I dial "20475666777" the company pays for it.
Lets say "20475666777" is a colleaguecalled "BOB"
Problem:
For example when "BOB" calls me the phone doesn’t recognize the incoming call. The display says incoming call from "+32475666777" in stead of incoming call from "BOB".
All the other nokia phones we used did this just fine....
Also when I save the same number without the "2" the phone say's the number is already in use for "BOB"
Maybe we can change a setting???
Several colleagues got this type of phone as a replacement and they all have the same problem since.
My apologies for the rather long text, hope it is (kind of) clear?
Thank you in advance!
Gert

You will have to store them AS SEPERATE numbers IE BOB 1 0475666777
And BOB 2 20475666777
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?

My iphone would not ring with incoming call despite ring tone was set up using sound setting. In the beginning, it did ring. After a while it stops working. Any idea to make it work again?

Is the silent switch on the side of the iphone on?

Apple tv doesn't work with my receiver

I updated my apple tv 3 and now it doesn't work with my Denon AVR-591 receiver. When I called Denon they said unfortunately the firmware on my receiver doesn't update and therefore may not work with certain devices. Is this possible?

connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

Why EL doesn't work with custom tags ?!

I don't know why expression lang. doesn't work with me.
here's an example, and please tell me why :
--- the jsp page with EL ==> doesn't work :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="${product}" addToShoppingCartUri="<%= response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
when using expressions instead, the page works .
the new page is :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="<%= product %>"
addToShoppingCartUri="<%=
response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
The error was :
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper
.java:512)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.runtime.JspRuntimeLibrary.getValueFromPropertyEditorManager(Js
pRuntimeLibrary.java:885)
org.apache.jsp.ShowProductCatalog_jsp._jspService(ShowProductCatalog_jsp.java:77
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.20 logs.

Regarding setup, see this post reply #6
http://forum.java.sun.com/thread.jspa?threadID=629437&tstart=0
Other potential things to check: make sure you are getting the right value passed in
productCatalog="${applicationScope.product}"
${product} by preference would take a pageContext, request or session attribute before the application level one (it uses pageContext.findAttribute).
What do you get if you just print out ${product} on the screen?
It should call a toString() on it for rendering purposes.

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

WP Greek Century in Mac doesn't work with Dreamweaver

I am a many year PC user and have finally made the leap too Mac and its another learning curve .. That said, in Dreamweaver and in Mac, WP Greek Century does not work! I have reloaded the font and all I see is the alpha #.   If I load it into any browser, it still will not read greek. My old PC didn't have a problem with this. Some of the download sites say that this font, WP Greek Century, works with both PC and Mac. The one odd spin to all this is that this greek font works in Fireworks ... Is there anything I can do to make it work in Dreamweaver? Please advise and thanks. Mark
ps. I called Apple support and they could not help.

Thanks for your reply and I was afraid that this might the answer. Looks
like I'm going to have to go back and fix a bunch of documents. Appreciate
your help in this matter. Mark
From:   SnakEyez02 <[email protected]>
To:     Marcusb B <[email protected]>
Date:   02/13/2012 09:20 PM
Subject:        WP Greek Century in Mac doesn't work with
Dreamweaver
Re: WP Greek Century in Mac doesn't work with Dreamweaver
created by SnakEyez02 in Dreamweaver - View the full discussion
Fonts don't work on the web like they do in print. Any font you use on a
website will require that the end user have that same font installed on
their system.
I did try to load that font from a free source (assuming this is how you
got it). It is a PC TrueType and doesn't appear to work at all on the
Mac. Now if you are looking for just a few characters you can code this
into the HTML:
http://tlt.its.psu.edu/suggestions/international/bylanguage/greekchart
.html . As far as other fonts, this greek font seems to work on Mac:
http://www.dafont.com/ancient-geek.font . But again, it's not a web-font
so you won't be legally allowed to use it on web pages, and it will only
work if the end user has that font installed on their system, unlike the
HTML entities previously linked.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4205108#4205108]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4205108#4205108]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL

In OC4J 9.0.3, when SSL is enabled, the call to
HttpServletRequest.isRequestedSessionIdValid() method doesn't seem to work. It always returns false when it is called even though the session has not yet expired.
On the contrary, when SSL is disabled, the HttpServletRequest.isRequestedSessionIdValid() works correctly as specified in the servlet specification.
Can anyone in this forum explain to me why HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL? Any solution for that problem?
Thanks in advance.

Hi Sanjit,
I've tried this on multiple PCs and get the same problem everywhere.
See picture with IE11 and chrome.
Sincerely,
Davy

Seconds_between doesn't work with variables in SQLScript

There is a sample procedure:
create procedure testproc
language SQLSCRIPT
as
l_curtime timestamp;
l_timedelta integer;
begin
select systimestamp into l_curtime from dual;
select seconds_between(:l_curtime, systimestamp) into l_timedelta from dual;
end;
It should return seconds between 2 timestamp values.
The code returns an error:
Could not execute 'create procedure testproc language SQLSCRIPT as l_curtime timestamp; l_timedelta integer; begin ...'
SAP DBTech JDBC: (at 160): inconsistent datatype: line 8 col 10 (at pos 160)
With «time» and «date» datatypes that's the same. So, seconds_between doesn't work with SQLScript variable (in this example, l_curtime). Is it a normal behaviour or supposed to be a bug?

Hello,
I can confirm same behavior - using variable inside seconds_between function leads to error. If you put there static string it is ok.
Of course you can always create "dummy" table (having 1 row with 1 column) where you will store the result of first call and then you will reference in second. But of course it is not that clean and it will be slower (especially if called many times).
But I would suggest to wait few more days - there should be SP03 released and everything can be different.
Tomas

Vibration Doesn't work with incoming Calls

Similar Messages

Maybe you are looking for