Vibration test with time stamp

Hello, is there anyone familiar with the subject? I'm looking for a example VI that measures vibration and displays the actual time stamp.
On the test, I want to see the peaks and time when it occured.
Any help will be appreciated.
Thanks!
FlipTek
KowdTek
LabVIEW 2009
One Step At A Time, Maybe Two...

Any example that returns a waveform datatype will do the trick for you.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

Mail attachment with time stamp

Hi
My scenario is Proxy to Mail.
On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
How to add time stamp to the attachment in reciever mail adapter.
Regards
Sowmya
Edited by: Sowmya on Aug 28, 2008 12:24 PM

hi sowmya,
The bellow link for MessageTransformBean..
[http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
In that ContentDisposition is used to fill the value for Attachment file name..
Its allows the value accordingly "RFC1806" Note..
RFC1806 allows accordingly RFC822 ..
Check RFC822 ..
5. DATE AND TIME SPECIFICATION
Regards,
Prakasu

File name for append processing mode with time stamp

Hi Experts
we are doing file to file scenario using the processing mode as Append.
the requirement for us to append the files and we need to have new file name with time stamp added to the appended file.but in the processing mode of the file adapter either we can append or add time stamp. thatz the problem I am facing now.
we are doing file based processing not message based ,micheal blog regarding the dynamic file name is for message based not for file based.
Please provide your valuable comments.
Thanks
Faheem

Hi mohamed,
I suggest you to map the target source structure to the required filename u want, like for example ur filename is input26062008.txt means to the target structure u perform the following mapping
constant (input) concat with currentdate function --> concat with constant .txt --> map this concat to target. So u will get the filename u expected with the time.
Then in the communication channel u select the mode as append. Now ur requirement will get solve i think so. plz try.
Regards,
Murugavel

How to read multiple Digital samples and plot a chart with time stamps

Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input'
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi ‏27 KB
DigitalNSample.vi ‏27 KB

Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi ‏27 KB

TDMS viewer not showing data with time stamp

Need help with time stamping data in a TDMS file generated by DAQ Assistant.
When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013).
Solved!
Go to Solution.

Bo_Xie, I have simplifed my VI and now able to display the correct time stamp. Thank for your time!

Advertisement Details of Specific Computer with Time Stamp

Hello Guys,
Could you please help me how to get Advertisement Details of Specific Computer with Time Stamp?
Thanks in Advance.
Mukhyaprana

It's true that there is no reliable install date, but IMO last status time for an advertisement is usually close enough.
Select r.name0, adv.advertisementname, stat.laststatename, stat.lastexecutionresult, stat.lastStatusTime
from v_r_system r
inner join v_clientAdvertisementStatus stat on stat.resourceID = r.resourceID
inner join v_advertisement adv on stat.AdvertisementID = adv.AdvertisementID
where r.name0 = 'clientname'
order by adv.advertisementname

Apache Trinidad is running with time-stamp checking enabled.

Experts,
Contents of my web.xml file
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>When my application runs i get the following on the weblogic console
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
Isnt it a bit strange ? Please advise what is wrong.
thnks
jdev 11.1.2.1

If you're talking about the integrated WLS, time-stamp checking is automatically enabled no matter what so that changes you make in the IDE can be picked up. It's nothing to worry about.
John

Inserting Current Date with time stamp in oracle database

Hi Experts,
I want to insert the current Date and time stamp in a field in the Oracle Database Table.
I am able to insert date but i am not able to insert the date with time stamp. Any Suggestions??
Thanks
Naveen

Naveen,
Do you want to get current date (from sysdate) with a specific format or transform a value containing a date/time value to insert it in ORACLE ?
Usually, you insert current datetimestamp in a date field using this :
TO_DATE(sysdate,'dd/mm/yyyy hh:mi:ss')
you may have to tweak the format pattern ('dd/mm....') according to your needs
if you want to transform a date, use something like this:
TO_DATE(your_date,your_format)
but make sure your format is compliant with your date, ie
TO_DATE('31/12/2008','MM/DD/YYYY') could raise error (litteral does not match) cuz ORACLE can't recognize 31 as a month pattern
Chris

File with time stamp

Hi All,
I using RFC to file scenario ,in this when file is created it folder it is coming with date and time stamp.but i am not using add time stamp in processing paramerts.i have checked the file name in communication channel monitoring it is coming without timestamp
but in folder file is getting created with time stamp.
Regards

Hi Gangadhar,
In the receiver file adapter, under Processing tab, see the value of File Construction Mode.
This value should be Create instead of Add Time Stamp.
After making the changes save & activate the file receiver channel. The output file then will not have timestamp appended to its name.
Regards,
Gautam Purohit

Bounce with time stamp

hi, is there a way to bounce with time stamp in logic? can logic automatically put time stamped files in the right place in the arrange window?
thx, w

Hi, Acmarie.
Thank you for visiting Apple Support Communities.
To see what time a message was sent or received. Drag any bubble to the left. Below, I have included the user guide which references this new feature on page 66.
iPhone User Guide
Cheers,
Jason H.

Where clause with time stamp

Hii,
I have an issue with using where clause with time stamp. My requirement is to
select * from driver_on_policy
where last_change_datetime = '2001-03-06 19:00:06'
date is in this form 6/3/2001 7:00:06 PM
thnks
sam

If you want to use '6/3/2001 7:00:06 PM', then
where last_change_datetime = to_timestamp('6/3/2001 7:00:06 PM','DD/MM/YYYY HH:MI:SS PM')If you can use a literal string in ANSI standard YYYY-MM-DD HH24:MI:SS format, then just
where last_change_datetime = timestamp '2001-03-06 19:00:06' (That 'DD/MM' might need to be switched around to 'MM/DD' if you are in America.)
Message was edited by:
William Robertson

Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "

Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
Thanks

whats the problem?
Aquaphire
---USING LABVIEW 6.1---

Formatting a string with time stamp and double precision numbers

%s\t%f\r%f
This is a format string that I have in old code that I've decided to change. Problem is I cannot make sense of the string codes in my own old code! Let me explain what I want, and hopefully someone can explain how to do it.
I am using the format into string subvi to merge a time stamp (formatted as %m%d%Y%H%M%S%5u) and two different double precision numbers. This string is then wired into the Write Characters to File subvi so that I can record data as a .txt file, and open it in either Matlab or Excel. There is a minor problem with the string format above because in excel the first time stamp entry is blank, and the first loop only gives the two double precision numbers withouth the time stamp - the time stamp appears in the next loop (probably a looping issue and not due to the string format, but if you see differently please let me know). Now what I want to do is 1. potentially fix that problem and 2. add some more doubles.
1. Is there a string format issue that is evident that I am not seeing that causes the time stamp to be formatted into the string after a carriage return? Or should I be looking at looping issues?
2. How do I add another one - three floating point numbers (double precision)? Are the \'s marking different numbers in this string constant? Or is it the %? I can't find any information about the \'s, but I see that % begins the format specifier.
Ideally, I want these data in the following columns: Date, Time(absolute), FP, FP, FP, carriage return for the next loop (FP is floating point double precision number).
Thanks,
Brad

Hi JonN,
Here there is no need of string concordinate function (in your code), the same result you can find if you connect the output of the format string to shift register, and shift register in data to initialize string connector in format into string function.
<<KUDOS ARE WELCOME>>
ELECTRO SAM
For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
- John 3:16

IDOC number should be passed with Time stamp

Here the scenario is IDOC to File.
Currently I am getting the date and time stamp but I want to pass the IDOC number after the torr_asn_20080522-010137-257.txt
torr_asn_?_20080522-010137-257.txt
Here in place of question mark I want to pass the IDOC number and how to pass
Let me know quickly as the issue is very urgent.
Points will be awarded.

Hi Arjya,
If your requirement is to create , the file name dynamically for your receiver file adapter, you can do so using your FILE ADAPTER CONFIGURATION itself, and need not go for any JAVA Mappping / Java Code at all.
*The dynamic filename generation concept is as follows.8
In your filename field in the receiver file adapter, just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
Also, in your FILE Adapter under the option FILE CREATION MODE, you have options like,
1.Add Counter,
2. Append
3. Create
4. Add Time Stamp
Reward points if this helps
Regards
Pragathi.

Exporting data to excel with time stamp

We have written an express VI code recording voltage. The code works, and the data is recorded, but the data is transferred to an excel file without the time stamp. In the excel file we have the data down column A, but there is no time at which any of the data was recorded. Is there a way we can get the time recorded in excel also? Thanks for the help.

I maybe wrong but I believe that the timestamp data associated with the data that is logged will be in the TDMS file as properties of those channels. Are you sure the time data isn't logged as a property?
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Vibration test with time stamp

Similar Messages

Maybe you are looking for