Vici valve

Bonjour,
Pour mon projet j'ai besoin de contrôler une valve 2 positions (Vici Valco Instruments). Pour cela je dispose d'une interface digitale de la valve (DVI) qui me permet de contrôler la valve manuellement mais aussi de manière automatisé. Pour la communication avec l'ordinateur j'utilise un relais de marque superlogics type (8067 combiné avec 8025). Superlogics fournis sur son site web un programme "Utility 8000" qui me permet en l'exécutant indépendamment de Labview de contrôler la valve sans aucun problème ce qui signifie que la communication est bien établie.
Comment puis-je incorporer "utility" dans un programme labview sachant que superlogics a fournis un vi?
Ci-joint le vi "utility"
Pièces jointes :
_Utility.llb ‏85 KB

Bonjour,
Excuser moi de la confusion mais ces 2 VIs n'ont pas était fournis par le constructeur de la valve, mais par le constructeur du relais superlogics (8025 combine avec 8067). Je suppose que la carte d'acquisition/génération correspond au relais superlogics. Le driver NI-DAQmx est installé. J'ai déjà contacté superlogics est ils mon dit qu'ils n'ont aucune expérience avec LabVIEW est qu'ils ne peuvent pas m'aider.
Ci-joint un programme que j'utilise comme modèle car le contrôle de cette valve a déjà été fait mais la personne qui a écrit ce programme a quitter le labo.
Cordialement
Japaris
Pièces jointes :
john breen program.vi ‏989 KB
Shut Down JB 060509.vi ‏870 KB

Similar Messages

My family of four (2 iPhones, 2 iPods) all share the same iTunes account. Many text messages sent to or from mine or my husband's phones are also received on my daughter's iPod, and vice versa. How do I fix this?

How can I keep text messages sent from my or husband's phone from being received on daughter's iPod, and vice versa? We have five devices on one iTunes account - 2 iPhones, 2 iPods and an iPad.

Hello Hrd1977,
This is typically caused by both devices sharing an Apple ID for iMessage and FaceTime. I would recommend signing out of iMessage on your daughter's device. Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out. Then sign in with the desired Apple ID.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers,
Allen

Unable to capture while external00 plugged in, vice versa

Ok, so first time i captured to my external harddrive it all went gravy. second time not so. If my external is plugged in, and I go to log and capture, it does not recognize that there is a camera plugged in through the firewire 400. vice versa. if i have my camera plugged in first and go to capture and log and then plug in my external to set the scratch disks, no way jose. starts freesing up and the spin wheel of death starts spinning. Why would this happen? Solution? Let me know. I need to edit!
External Harddrive: LaCie harddisk 750gb, firewire 800
Final Cut 6 Studio 2
MacBook Pro intel core duo 120gb, 2 gb

Marc
I'm not in the States but just as an example, look at these:
http://www.nitroav.com/product/444/
http://www.sonnettech.com/product/fwusbexpresscard34.html
Please make a research. Probably the Macbook Pro forum is a good place to start Searching:
http://discussions.apple.com/search.jspa?objID=f1152&search=Go&q=firewire+expres scard
Good luck!
Alberto

While inserting numeric data into a character datatype field and vice versa

Sir,
I have a very basic qiestion.Why am i not getting any error while inserting to say employees table a character type data to a numeric type field and vice versa?Iam using Oracle Database 10g Enterprise edition.

Why am i not getting any error while inserting to say employees table a character type data to a numeric type field and vice versa?
Oracle tries an automatic conversion, when possible. Post an example of a character type data inserted into a numeric column.

High ping on Valve servers

Hi,
Over the past month or so, ive noticed im getting a ping of over 200 on Valve servers on Team Fortess 2. For the past 2 weeks, it seemed to had settled down a little to about 70 ping, which i can play on but now its back to 200+. After starting a steam forum thread about this, i soo realised that everyone that has the problem is on BT infinity. One guy added me and we discussed what we was on and what problems we were getting and they were identical. BT Homehub 4, high ping only on Valve servers
Ive reset my connection in a million different ways suggested by different people and none of that did anything. From a few searches, some people fixed the issue by getting mods to change their latency type from Interleaved to Fast, but i dont know what im on so i cant tell if thats the issue.
I dont know what im meant to post but this is all the specs under "Helpdesk":
1. Product name:
BT Home Hub
2. Serial number:
+068341+NQ31327903
3. Firmware version:
Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 10/05/14
4. Board version:
BT Hub 4A
5. WAN:
PPP Connected
6. Data sent/received:
136.1 MB / 415.5 MB
7. Broadband username:
[email protected]
8. BT FON:
Yes
9. 2.4 GHz Wireless network/SSID:
BTHub4-XS3P
10. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
11. 2.4 GHz Wireless security:
WPA and WPA2
12. 2.4 GHz Wireless channel:
Automatic / 11
13. 5 GHz Wireless network/SSID:
BTHub4-XS3P
14. 5 GHz Wireless connections:
Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
15. 5 GHz Wireless security:
WPA2
16. 5 GHz Wireless channel:
Automatic / 40
17. Firewall:
Default
18. MAC Address:
2c:39:96:6b:7d:56
19. Software variant:
20. Boot loader:
BT Home Hub 4 (Type A) | Software version 4.7.5.1.83.8.130.1.17 | Last updated 10/05/14
Any help?

Just got off the phone with someone from BT trying to convince me its an issue either my end or Valve's end (Even though it happens on non valve games also). Valve have told me its my ISP, which i am 100% certain it is, and she is just telling me to reset my router just once more.
Hope the forum can save me here

How do I control a servo-valve to open and close with Dasylab?

I am currently using a servo-valve to run an endurance test and would like to control it to open a close at a set frequency rate and set pressure rate (6000psi). Is there a controller that I can use to do that? I am using Dasylab with a NI Daq board and I get the pressure and flow readings from the analog to digital signals correctly but to actually control a servo which is powered with and external power supply to provide 25VDC.

It would be unwise to use DASYLAb to close a loop on a servovalve.
The best way to do that would be to buy a analog PID controller board, MOOG and Parker sells those, and use an anaqlog output from the NI card to controll it.
We did many tests using this way.
There are also other option like servo-controllers that could perform many tasks, like FG, conditioning, limits, and profiles and then use DASYLAb for Data acquisition.
The price for this solution would be of course higher.
Tom Rizzo
InSyS Corp.
www.insyscorp.com
Your DASYLab integrator

Opening & closing a solenoid valve using ni usb-6009

Hi,
I am very new to labview so any help would be apprciated.
I am using the ni usb-6009 as a power source for my solenoid valve. The valve is 12vdc but because the max output voltage for the ni usb-6009 is 5v i have designed and build an op-amp circuit which will amplify the voltage. I want to create a vi that will give a +5v digital output when a push button is pressed and 0v when the push button is off. What would be the most efficient way of doing this? Thank you.
Solved!
Go to Solution.

How much current does the solenoid draw? You say that you are powering the solenoid from the USB-6009 so just converting the voltage from 5V to 12V will not work - there is a current limit of 8.5mA on the 6009 which will not be enough to power the solenoid. You will need to use an external supply that can provide sufficient current to drive the coils of the solenoid and then use a transistor circuit to switch on the supply from the digital output of the 6009 (which can't draw more than 8.5mA).
Once you've got your circuit right, you can use MAX Test Panels, the Data Acquisition Express VIs or the DAQmx palette in LabVIEW to control the digital output. There are lots of examples in LabVIEW on how to do this
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

I just got 2 new iphone 4 (verizon) i have a issue, i have 2 itunes account 2 phone seperate names and emails. but when i update or sync my phone it copys my wife stuff on to my phone and vice versa.

hello
i need some help.
well you see up above where i have 2 iphone 2 different names for the phones and 2 different accounts with 1 itunes on widows 7.
my problem is when i update or sync my phone it grabs all her info and apps ect. and vice versa when she does it to. is there any way that i can stop this from happing again?
1 more thing this happens just on her phone when she goes to download a app for some reason my email is on her phone, we have to sign out from her phone and sign back in and put her email in any thoughts on this?

By far the simplest way to do this is create separate accounts on the computer for each person. That way, you each log into your own separate account, sync your own device(s) to your own contacts/calendars/apps/music and so forth.

My nephew and I use the same iTunes account and when I add an app it is loaded on to his iPhone and vice versa... How do I make that stop?

My nephew and I use the same iTunes account and when I add an app it is loaded on to his iPhone and vice versa... How do I make that stop? I have already unchecked the "Auto Update Apps" button. It happens with all purchases in the app store and on iTunes. HELP!

I also think separate accounts is the way to go....if he is over 13yrs also remember if you do make an account for him and use your bank card all purchases will be charged to your card.

My wife and I got Iphone 4S same day 2 years ago. I used the same Apple ID for both. We do not use iCloud, but today after I updated my phone to IOS7 I keep getting her texts on my phone ans vice versa.

My wife and I got Iphone 4S same day 2 years ago. I used the same Apple ID for both. We do not use iCloud, but today after I updated my phone to IOS7 I keep getting her texts on my phone ans vice versa. I turned off imessage in message settings. Seems to have stopped now? Never did this before IOS7. Will I have more troubble when her phone updates to IOS7? Is icloud going to be forced on me then?

This is being caused by using the same Apple ID for iMessage on both phones. To separate your messages, go to Settings>Messages>Send & Receive and do one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
If you want to continue to receive iMessages at this email address, on one of the two phones, tap the Apple ID at the top, sign out, then sign back in using a different Apple ID.

HT1766 Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

You can share the same Apple ID in
Settings > iTunes & App Store > Apple ID: here
But for all other Apple services like:
FaceTime, iMessage, iCloud, etc, one of you should use a different Apple ID.

Email sent on my iphone 5 does not show in the sent folder in mail on my macbook pro and vice versa especially since update to Yosemite

I have an iphone 5 and a Macbook pro. Since upgrading to Yosemite, when I send an email from my yahoo email account or another email account linked to my website, on my iphone, the emails don't show in the sent folder in mail on my macbook pro and vice versa.
I have deleted the accounts and re-created them on both my iphone and macbook pro but the samething keeps happening.
When last I was at the istore, they were unable to sort it out and said I needed to book it in.
Any suggestions that will prevent me from booking my macbook pro in are welcome.

Hi,
Are you saying you are trying to synch iMessages across two iPhones ?
Or do you mean you are trying to get iMessage that were synced to one iPhone to show on another ?
Whilst the first is possible - from the date you add the second iPhone the second is not possible.
10:11 PM Saturday; January 5, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My partner and I share and iCloud account, we updated our software now whenever she gets a text message I see it on my phone and vice versa

My partner and I share an iCloud account . We both have the iPhone 5. We recently updated the software to the iOS 7.2 and now whenever she gets a text message I receive and vice versa. This never happened before only happened since the update

iCloud has nothing to do with messages (iCloud does include an email account, but not a messaging service). If you both use the same AppleID for iMessage, then you are sharing the same messaging account.
One of you needs to get an alternate AppleID, sigin out of iMessage, then sign in with the alternate AppleID. That way you will each have your own private iMessage accounts.

How to sync my iPhone to my MacBook Pro and vice versa as it no longer seems to be doing?

How to sync my iphone to my MacBook Pro and vice versa as it no longer seems to be doing? When I initially set up everything it worked fine; however, now my contacts are not syncing between devices?
I have Icloud and even paid for ectra storage to see if this was the issue but it doesnt seems to be. When I try and view devices on my itunes to sync it will not allow - blank option?
If anyone could please help it would be really appreciated- thanks in advance:)

I don't know how you got to your current position, but you might want to start by replacing your calendar with your MacBook Pro calendar if it is correct (if it isn't, skip this): first disable calendar syncing on your phone (Settings>iCloud>Calendars set to OFF), then prior to syncing open iTunes on your computer and disable automatic syncing (under Preferences>Devices>Disable...from syncing automatically syncing). Next connect your phone and set your sync settings on the Info tab to Syc Calendars with iCal, and below under Advanced choose "Replace Information on this iPhone" and check Calendars. Now sync and this will hopefully replicate your MacBook calendar on your iPhone.
Next, carefully review this to see that you have correctly set up iCloud on both your phone and your MacBook: http://www.apple.com/icloud/setup/, and that your meet the minimum system requirements (latest version of iOS on your phone, latest version of iTunes, OSX Lion 10.7.2 or later).

Vici valve

Similar Messages

Maybe you are looking for