Video and audio clips not moving together on timeline

So every time I move my video clips in the timeline, the audio clips are not following.
I know "make a stereo pair" links up the audios, but is there any way to make the video and both the appropriate audio tracks move together?
Thanks
D

Link them - select the video and audio tracks and press ⌘L.
Patrick

Similar Messages

  • Linked video and audio do not move together on timeline

    Hello, I have been working in a project for a couple of days and cannot find out why the video and audio do not move together when one of them is dragged laterally on the timeline. They are linked yet do not move together. I seem to remember one of the first clips I dragged down to the timeline did what it should but they do not behave as they should. If I click on both clips the only option is unlink. When I move one part in the timeline it shows me how much they are out of sync.Any ideas?
    ~Grant

  • How can i fix a clip when the video and audio are not matching up?

    How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

    I would try detaching the audio and the dragging the audio to the left or right until it lines up.

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • My Video and Audio are not syncing up after importing

    I am trying to edit a few Ipad Clips in premier pro.  My video and audio are not syncing.  They are .mov lower resolution from the ipad.  The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead).  I did not add any affects or change anything.  Please advise?
    Thanks for any help in advance.
    Allison

    Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

  • FR: Keep Video and Audio clips Linked in Multicam once razored

    Here is my feature request, if you agree please cut and paste and submit to feature request!
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    *******Enhancement / FMR*********
    Brief title for your desired feature:
    Keep Video and Audio cuts in a Multicam sequence linked together when using the razor tool.
    How would you like the feature to work?
    Whether inside a multicam created sequence, or a multicam sequence that has been pasted into another layer on a separate sequence, I want the video and audio to remain linked together when a cut is made. Currently, when I make a cut, the audio and video become unlinked and I have to first a. make all the razor cuts, then b. go and relink the video and audio clips back together. Takes an extra 30 minutes every time now.
    Why is this feature important to you?
    To save time and stop the long redundant process of click selecting the video and audio and linking them, over and over and over, in a multicam sequence. Obviously if I can do it manually, it can also be done in-program.

    When you create the multicam sequence manually (still the best way, I think), video and audio remain linked.

  • Here is a Tutorial on How to sync Multiple Video and Audio Clips

    Check out my Tutorial on How to sync Multiple Video and Audio Clips http://vimeo.com/28972315

    Very true ! My main point was to show how easy it was to sync. I still think apple has a way to go to make this a great tool. It was fast to edit but when I want to send somthing to AE 5.5 it was a nightmare. I do  I love how it organizes keywords and the color correction tools are good if you want to do it your self (check out this site http://www.colorgradingcentral.com/final-cut-pro-x-color-grading-table-of-conten ts ) it will be a great program if apple listens to all the comments but does not make it too complicated the you cant create quickly.

  • I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync.  They work fine when played in Quicktime.

    Hello,
    I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program.  It appears to work fine in Quicktime.
    Thanks in advance.

    mbgoodwi
    Thanks for the reply. This is the plan.
    Open Premiere Elements 12/12.1 to the Expert workspace.
    In the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, select the project preset
    NTSC
    AVCHD
    AVCHD LITE 720p30
    OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
    Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
    Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
    into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
    Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
    There should be no colored line over the content if the project preset matches the video properties. But, if you do see
    that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
    the Render button above the Timeline.
    Do your video/audio now play back in the Edit area monitor in sync?
    Please let us know the result, and then we will decide what next.
    Thanks.
    ATR

  • I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips?

    I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips? This is not hack/ripped video but a legit home movie.

    In this case, it looks like Quicktime wasn't very efficient in managing memory, leading to a slowdown in playback. If QT has a lag and VLC doesn't, that's more evidence.
    I couldn't say why your friend's windows computer plays the media fine, while your Mac doesn't. The only thing I could suggest is to disable QT streaming video - which has been known to slow down performance.

  • Video and audio tracks not synchronized after importing

    When I try to watch a video in quicktime or itunes video and audio tracks not synchronized. If I wach on another player they are synced. Anyone help?

    John:
    Thanks for your reply.  Excuse my referring to you as "Kevin".  I'm new to the Adobe Community.  I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself.  I'm going to try both solutions.  Whichever works I'll be sure to reply to the thread with my findings.  I found this article which provides the following solution:  http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

  • Video audio enabled clips not moving together

    I am dragging clips on to the timeline. They have audio and video. the dialogue box says they are enabled. However, If I move the clip, audio and video  are not moving together when I drag either the video or audio clip in the timeline. Even when I disable the clip, link them or group the audio and video, they do not move together

    Link them - select the video and audio tracks and press ⌘L.
    Patrick

  • How can I incorporate several video and audio clips into one iMovie project?

    Hello all.  Basically, I'm trying to solve a problem before it becomes one.  I'm going to put together a short iMovie project for a thank-you dinner.  Several people from out-of-town will not be able to make the dinner.  I want to give them the opportunity to "speak" by having them put together a short video or audio clip.  I then need to gather up all the clips and put them together in one iMovie project.  I guess I'm looking for some assistance in terms of format, what types of files/formats to use, etc.  I've done a few movies (mainly from still pictures -- glorified slideshows with music).  But, I'm still a relative neophyte when it comes to the computer world.  Any assistance would be greatly appreciated.  (feel free to point to a "How to " tutorial if there's a good one out there). 
    Thanks.

    your problem will not be the process of 'glueing stuff together'
    follow advice given here
    http://www.apple.com/support/imovie/
    under 'Getting started' or follow the 'Video' tutorials ...
    the real task is, to make all clips readable for usage in iM ...
    before making you a technician on video-codecs:
    download and install the free tools Mpeg Streamclip and Perian.org
    you have to relaunch your Mac after doing so...-
    BEFORE adding any of your external sources into an Event, use Streamclip to manually convert to DV, or if source is HDef, to Quicktime/Appleintermediate.
    the resulting files should import flawless into iM, proceed as usual.
    iM 'swallows' a lot of formats, so it could be this manual conversion isn't needed ... 
    don't hesitate to come back here, if probs occur ...

  • FME Firewire Video and Audio Support(not from Camera)

    I can't seem to find any definitive answer on weather FME can
    support both video and audio from a single Firewire connection that
    is coming from an analog to digital Firewire converter box. I want
    to take the analog audio and video feed, convert it to a Firewire
    feed (using a Canopus DV converter) and feed that into a laptop.
    Seems like that should work and both audio/video would be
    present...
    That being said, I have found a few conflicting reports on
    weather or not both the audio and video will be recognized. I also
    note that others have been having issues in FME with PCI cards (no
    audio when it should be there) so I'm curious if anyone has tried
    Firewire (not from a camera). Will it work in FME v2.5+? If not, is
    there an elegant laptop analog to digital conversion solution (that
    doesn't require using the crapy mic in or line in ports)? (RCA
    connectors would be preferred.)
    Thanks so much!
    P.S. I'm disappointed with Adobe's lack of support on this
    encoder. They claim Firewire is supported but I've only found a few
    3rd party sources that say 'video only' and nothing concrete at
    that (even in the downloadable manual). I'm also disappointed at
    Adobe's lack of e-mail support for 'pre-sale' product questions.
    Not supper great customer service!

    FME should support audio and video from Firewire
    source.

  • Video and audio chat not working

    Hi All,
    I also have problems with iChat. I tried it before leaving home with two macs on a wireless network. Worked well. Im now overseas and the text chat works ok but both the video and audio chat fails to work. The buddy receives the telephone tone informing him that im trying to chat and once accepted the chat fails and the error message is "buddy failed to respond". Not sure what to do to get this working. Please help as it worked from room to room but not country to country???

    Hi,
    The Log can be expanded when it pops up and the top part of the log can help us to pin point things for you.
    The Logs are also stored in User(your account)/Library/Logs/iChatConnectionErrors
    Error 8s refer to port and NAT issues.
    The details can isolate where to some extent.
    We will need to know the connection device you are using at both ends (Modems and routers) ?
    How you have set them up (DHCP, Ports opened, methods used) ?
    What you have done on each mac to set up iChat and the Mac for iChat
    4:30 PM Saturday; November 17, 2007

  • Linking All Video and Audio Clips at Once

    I'm running the most recent version of Premiere CC 2014 on OSX.
    Somehow I accidentally unlinked every video and audio track on my timeline (I didn't make them offline - I unlinked them so that they select independently on my timeline when I want linked video and audio from the same clip to select simultaneously).
    I don't want to have to go through my entire timeline and re-link every clip. Is there a way to easily select all media and link it? I've tried highlighting everything, right clicking and selecting "Link," but this hasn't worked.
    Any tips would be appreciated.

    I have to start you from the beginning to make sure everything is set correctly.
    Under the Edit menu, make sure "Linked Selection" is checkmarked (also Shift+L).
    Once that is done, make sure the video clip is linked the it's corresponding audio in the timeline. Do this by selecting them all, and choosing "Link" under the Modify menu (or hitting command + L).
    Try that and if it doesn't work we'll go from there.
    Joni

Maybe you are looking for

  • Can i bring an iMac from us to use in uk

    Hi Guys, My dad has purchased an imac for us. but he has bought it in the US. But I live in the UK. I am worried that there might be a voltage problem. And what about customs and above all getting it here. Has any one done this kind of thing before?

  • Xperia z3+ dual second sim problem

    Hey guys, I just purchased a Xperia Z3+ dual and the first time I turned it on with both sim cards it was working fine.  Then for some reason the second sim stopped working on the 2G gsm network. I factory restored the phone and it worked again. The

  • Series of Dark Spots at the Screen Bottom

    Hi all, Just purchased my Macbook Pro 15" w/ Anti-Glare LCD screen. This is the 4th Mac I've owned over the years so I'm familiar with them. The second time I went to use it, I noticed a series of dark spots positioned horizontally at the bottom of t

  • Why can't Safari save anything?

    If I can view an image, why not allow the browser to save it? Same goes for videos supported by the iPhone. Just seems silly ... though I suppose it allows further content control and all that ... but c'mon. :\

  • The simplest of form spam traps

    I feel as if I am just one step away from solving my form spam problem. I want to institute the simplest of traps in my form.cgi file, whereby I check a hidden field for any content or I check a field for specific content ("what is 5 x 5"). I just do