Video and audio files no longer play thru safari, QT, RP...but itunes OK?

What might have caused this? Last I did was to install some sw to hear/see wiki posts....

psychjed-
Greetings and welcome to the Apple boards.
Take a look at this document.
Luck-
-DaddyPaycheck

Similar Messages

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • How to transfer video and audio files from windows PC to new ipad?

    How to transfer video and audio files from windows PC to new ipad?

    iTunes: Syncing media content to iOS devices and iPod
    Sync with iTunes.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums, artists, playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Follow the same procedure for Movies.

  • Cutting and saving individual video and audio files from a clip

    I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

    Without knowing more about your project, it's hard to even guess at the most efficient workflow.
    Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
    As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
    Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
    Good luck.
    Russ

  • Video and audio files hosted on your site

    It would be great to be able to host your own video and audio files and not have to rely on YouTube or Vimeo.  Design a widget to for ease of use.

    Yes, you can easily work with only audio or only video from a video clip in Premiere Elements.
    How you do this depends on which version of the program you are using.

  • Some audio files no longer playing?

    I am half way through an imovie project and recently added audio commentry, however some files no longer play also a few now have a yellow warning triangle?
    Im assuming the files are now corrupt or something?
    really annoying!, anyone have an idea what the problem is??
    Cheers

    Hi
    I'm assuming the files are now corrupt or something?
    I don't
    Yellow triangle - indicates that the pointer in iMovie to the Audio file used, no longer is valid.
    iMovie - DO NOT Copy the audio You put into Your movie project's at all - only points to where You found it.
    E.g. - You insert an Audio-CD and use a tune from this in Your movie - then you need a tune from another CD and Ejects the first one =====>  RESULTING IN A YELLOW Triangle - pointer to the tune on Your Audio-CD is broken up on You ejected the CD.
    I copy all needed Audio to a dedicated folder first (as I store in a proper place e.g. movie folder in User account) - then I use them into my movie.
    The deeper thing is - That there is NO movie in Your Movie Project at all - only a small text document pointing to the material used (video, photos, texts and audio) AND how You want it to be presented AS a Movie.
    Only when Shared / Finalized - there is an actual movie created.
    This is Non-Destructive non linear Video Editing and how it works.
    Yours Bengt W

  • Scrol bar to slow down a video and audio file

    Hello,
    I need a scrol bar to slow down a video file (video and audio)
    Thank you.

    you want a video to play at something other than its native framerate?
    if yes, you can't easily do that with an flvplayback component.  you'll need to separate the audio and visual parts of your video and had them to a movieclip timeline.  then you'll need to customize the playback speed of that movieclip.
    you can use the following to play any movieclip (forward or backward) at any speed:
    function playF(mc:MovieClip, m:int, n:int, fps:int):void {
        var playFFF2:Function = function(mc:MovieClip):void {
            trace(getTimer(),mc.currentFrame);
            if (mc.m<mc.n) {
                mc.nextFrame();
            } else {
                mc.prevFrame();
            if (mc.currentFrame == mc.n) {
                clearInterval(mc.int);
            //updateAfterEvent();
        mc.m = m;
        mc.n = n;
        mc.fps = fps;
        mc.gotoAndStop(mc.m);
        clearInterval(mc.int);
        mc.int = setInterval(playFFF2, 1000/mc.fps, mc);
    // and to stop it:
    function stopF(mc:MovieClip):void {
        clearInterval(mc.int);

  • How do I play a video and audio file at the same time on Apple Tv?

    I need to play a video loop (with no audio) on my apple tv and also play some music in the background. Its a video loop with no audio and then I need music to play in the background. The loop needs to repeat all day because its only 5 min long and the audio is an entire play list that's several hours. This is for a lobby flat screen setup.

    QuickTimeKirk wrote:
    Very difficult request because the Apple TV can only play one file at a time. It doesn't have a "loop" feature.
    You could use QuickTime Player Pro to "join" the audio files into one file. The hard part would be adding the five minute video chunks via copy/paste as each would be added as a new "video" track. QuickTime .mov files can have up to 99 "tracks" and the .mov container is supported by Apple TV.
    So this new file would have a new video track (actually just a copy of the original) that played up to 98 times. A five minute source video would end up being a bit over 8 hours in duration.
    The 98 track video could be "flattened" into one video track via export. The same for the audio track movie.
    Other options:
    Set the Quicktime Loop flag in the movie inspector properties.
    Make a video playlist, adding the file to the playlist lots of times - make sure playlists are enabled in Settings for video not just music.

  • Video and Audio Files are different lengths when exporting

    I'm just trying to get comforatable with a much faster Windows workstation on PPro and AE.
    I just exported my first project from PPro to burn to Blu-ray like I've done dozens of times on our older Mac Pro w/o problems.
    My Ppro file is 7:04:18 in length.  I export the video as an mp2 Blu-ray video and import it into Encore and it shows up at that same length.
    I export the audio as an aif and import it into Encore and it shows up as 7:06:19 in length--2 seconds and 1 frame longer.
    Everything is CS6.  File is 1920 x 1080, sq pixels, 29.97.
    Any suggestions as to why this is happening?

    Thanks for the feedback.  I exported to aif as I was going to burn the Blu-ray on our Mac Pro in Encore, since we don't yet have a Blu-ray burner installed in our new Windows workstation. 
    Upon seeing your note, I re-exported the project as you described and placed the wav and mp2 in Windows Encore and they are both the same time length.
    It seems the aif should be the same too... but I assume wav is likely the preferred format on Windows so will be using that as the new workflow.
    Thanks for your help!

  • Help!- MP3 and WMA files no longer playing on my Micro Pl

    I have a 52mb micro plus that I got in September 2005. All of a sudden, I can longer play my mp3 and wma files... just the radio. I have updated my creative zen file organizer, I have a full powered battery inside, I have done no significant damage to the player (I dropped the player once on the sidewalk but not from a big distance or very hard), and I really can't think of anything else that is causing the problem. Can someone please help me fix my player so I can start playing my music files again? Thank you.Message Edited by jjc92787 on 05--200707:0 AM

    No unfortunately not. I don't know how to escalate this to Apple tech but I think that is the next step as I believe it is IOS based problem, not user related.

  • Embedded audio file won't play in Safari

    I'm trying to plan an embedded audio file in safari, but it just never loads. Similar files on the same page are marked 'Flash 9 is required to listen to audio' - I have listened to these files before without any problems.
    I have Flash 11.5 installed, have tried uninstalling/reinstalling Flash and all the fixes for when YouTube videos won't play in Safari but to no avail.
    Any suggestions?

    You will really need to upload it if you want someone to help you troubleshoot the problem.  It could be any number of reasons.
    If and when you do upload, make sure that you upload the supporting folder that is created when you create a swf on a page.

  • Cannot preview videos and audio files

    I have Adobe Bridge cs3 2.1.1.9 and Version Cue cs3 3.1 installed and I am unable to preview my video files. Also, I am having trouble with playback of .wav files as well. I have tested the .wav files with a media info software and it told me that I do not need any additional codecs for its playback, but still I cannot play them on any of my players.
    I still think the .wav problem might be codec related or some other issue after the same fashion, but I believe the "movie files can't preview on bridge" is some sort of stupid setting I just can't seem to find (specially because all of them play on their default players).
    Any thoughts would be most helpful.
    Tnx in advance.

    In the past I have seen posts where Quicktime and Bridge had conflicts. Update Quicktime to latest version and see if that solves problem.

  • Need to convert video and audio files in high quality

    Hi to all, i need to convert file types such as .AVI, .WMV and .MOV and keep the high quality, but i dont have or know any software to do this, are there any good options out there?
    I don't really want to use a trial version, thanks.

    I've used FFMpegX for my conversions. I've never looked at them on a large screen to see how well the video quality held on, but they look fine on my MacBook.
    http://www.ffmpegx.com/
    ~Lyssa

  • Video and audio files from dvd using FCP

    Hi
    Trying to get footage from a dvd using fcp. I can import the clips ok using file >import but they have no audio with them and the audio folder on the dvd is blank...any ideas????????
    cheers

    The audio_TS folder is normally blank.
    You need to use MPEG Streamclip to get the DVD files to Quicktime.

  • How to download video and audio files

    Pl tell me how to download mp3 & mp4 files from fox browser

    hello afrozahamed, please have a look at the following article which should cover your question: [[How do I download music, photos and videos from the browser?]]

Maybe you are looking for