Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Similar Messages

  • HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card

    i want  HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card (Windows 7) 

    Hi:
    Below is the link to the support and driver page for your notebook.
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c03061225&lc=en&product=5163244&quer...
    Your model uses the AMD graphics driver only. Don't install the Intel one.

  • Premiere Pro 2.0 compatable video and audio formats

    I am working on a project that uses old vintage newreel clips and such from the 50's and 60's, they are available for download in several different formats.
    I have downloaded many of them but when i import them into my timeline, there is no audio for these clips. They work when i just play them out of premiere. What are the supported formats for premiere pro 2 both in video and audio?
    I have made several movies but haven't come upon this issue before.

    Welcome to the forums.
    The following links will help you:
    FAQ: How do I import xyz format files?
    FAQ:How do I convert my files?
    FAQ:Why is there no audio in my imported MPEG file?
    Cheers
    Eddie

  • Changing Video and Audio Formats

    Hi
    Can I use JMF to convert videos and audio from one format to another?
    Regards,
    N�stor Bosc�n

    Yes you can, I'm struggling to do just than, with audio captured from a mic to mp3 file, and also from mp3 file to wav file.
    Message was edited by:
    MuadDib

  • When I switch between "normal" and fullscreen in a youtube video, the video and audio stops for a half second. Any solution?

    It is only present in firefox. Did reinstall whole windows 7 also, still have the problem :(

    Hello,
    This could be related to the graphics card taking some time to display the flash video. Can you please check and confirm if you are seeing this issue when you use the HTML5 player of YouTube. To do that, you can do the following
    #visit the [http://www.youtube.com/html5 HTML5 page of YouTube]
    #Select the 'Request HTML5 Player' option
    #Try viewing the video and see if the issue is happening
    #You can switch back to the flash based player by revisiting the page and selecting 'Use the default player'
    Please try that and let us know if the issue is recurring or not.
    Thank you

  • I have sluggish video and audio when mirroring ipad 3 or iphone.  Any solution?

    I have the new ipad and also the latest iphone.  I really want to use mirroring to stream a particular video each day that i subscribe to using the mirroring feature.  I have found that the audio keeps dropping and playing catch up.   The audio drops out often whether i use the ipad or iphone.  I have a very good wifi connection in the house with full bars for what that is worth.  The audio is fine if i do airplay only.  But the mirroring feature drops the audio often. 
    Is there a way around this?

    I had exactly the same problem. The solution is whatever device you first paired your jam speakers to, go back to that device and and delete jam2 from the bluetooth settings in that device. You're then free to pair your speakers to another device, mac book, ipad, whatever.
    So each time you want to pair your speakers to a different device from the last, you have to go into the bluetooth settings of said device and delete jam2 from it's memory. A bit of a headache but nowhere as annoying as wondering why the **** your speakers won't with your mac/ipad when they've just been working with your phone!!!!

  • Video and Audio Format Conversion

    Hello,
    I recently bought a Macbook, and I am wondering if there are apps available that can convert audio and video.
    I used VirtualDubMod on the PC to edit video, Audacity to edit audio, and SUPER to convert formats of the edited audio/video.
    Are there similar apps available for the Mac? (All of the above are free apps too!)
    Thanks,
    Abid

    Check here for what you are interested in. Some of them are free.
    http://www.pure-mac.com/video.html
    http://www.pure-mac.com/audio.html

  • Cutting and saving individual video and audio files from a clip

    I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

    Without knowing more about your project, it's hard to even guess at the most efficient workflow.
    Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
    As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
    Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
    Good luck.
    Russ

  • Video and audio not in sync. Other answers here do not help.

    My audio and video are not in sync in many streams but some are OK.
    I do not have any extensions, add-ons and I am using the default theme. I have disabled hardware acceleration. I am now running in Safe Mode and the problem persists.
    The video and audio sync for the first few minutes and then they work their way futhter and further apart, usually several seconds out of sync. I don't think this particular situation has been covered in the other posts.

    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Pcastagentd video and audio settings

    Dear List,
    Since it took us some time to find this list (buried in the pcastagentd binary), here are the possible video and audio settings for the capture agent:
    RecordingVideoCodec: H264, MPEG, DVNTSC, DVPAL, AppleAnimation, AppleComponent
    RecordingVideoCodecQuality: Low, Medium, High, Lossless
    RecordingAudioCodec: AAC, NONE
    RecordingAudioSampleRate: 24, 32, 44, 48
    I hope this saves others both time and energy.
    Regards,
    Jamie Hodge

    Dear List,
    Please note that there is also a "raw" NONE setting for the video recording codec. I have tested the various settings. All have "booted" save for the AppleComponent codec.
    I hope this helps.
    Jamie Hodge

  • Video formats for Ipad

    Hey, i Have an ipad 2 and am trying to place video files on it. I have been tryig to copy over the same files i use on my ipod clasic but they wont work and said its not compatable. its weird. Thanks for your help.

    Here are the spec for video and audio for the iPad:
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Embedding video and audio for internet flipbook

    Dear All,
    first of all, sorry if it's been asked before but I could not find direct answer.
    My company, small translation agency in Poland, plans on to buy InDesign to improve quality of our output documents, but we have one more feature in mind and we don't know if InDesign CS6 supports this.
    In a movie http://tv.adobe.com/watch/cs55-design-standard-feature-tour/create-more-compelling-ebooks- with-indesign-cs55/ Terry White presents how to make an eBook with embedded video. We need a solution to create a similar effect, but the final document would be accessible from WWW (eg. http://essentialabsurdities.com/dance/ - there is no video in the example) - we want people to be able to browse content like in a book (flipbook?) and access video and audio (embedded or stored on a serwer along the document) when needed.
    Does InDesign support this? What should be the final format of such a document? Interactive PDF? SWF? Everybody says Flash is going to be retired soon (Apple does not support it, Android devices are soon to follow, the same for PCs in the nearest future probably) so we do not want to use this.
    Many thanks for your opinions on the issue.
    Best wishes,
    Michal Kornacki

    I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

  • How to transfer video and audio files from windows PC to new ipad?

    How to transfer video and audio files from windows PC to new ipad?

    iTunes: Syncing media content to iOS devices and iPod
    Sync with iTunes.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums, artists, playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Follow the same procedure for Movies.

  • I need to connect Lightning to RCA componet for both Video and Audio

    I have an Ipad  2nd generation and use a 30 pin to RCA Componet adapter from rockfish and its work great for video and audio.  I now have a IPad mini 5 gen and I bought a lightning to 30 pin adapter and tried to use my Ipad mini to watch video and audio.  Audio works but video does not. Does anyone have a solution for this for the new Ipad Mini and iphone 5s.

    Nope.
    There is no lightning to RCA.
    The 30 pin adaptor clearly states it does not support video out.

  • Best video and audio converter that contains most format at mac app store

    Dear All;
    What is the best video and audio converter that contains most format at mac app store?Can you suggest any on Mac App Store?
    Regards;

    I use Wondreshare's dvd ripper. I travel for a living, so the $60 or $70 I spent to rip my entire dvd collection onto an external hard drive that I can take anywhere I go. Their software isn't available in the App Store to my knowledge but I have had it for a couple years now without any trouble.

Maybe you are looking for

  • ITunes says iPad is supervised by another computer?

    I have a school distributed iPad and they gave us the freedom to put music on it. However, when I plug in my iPad into my PC, an error message comes up and says, 'iPad is supervised by another computer and cannot be used with this computer,' and then

  • Copying Header level Billing Plan to Item Level Billing Plan

    Hi Gurus, I have the following Business Scenario: I am creating Sales Order with reference to contract. In the sales order item level detail, a check box(Copy Header level Billing Plan to item level Billing Plan) is checked. For my Business Scenario,

  • Strange slowness in creating new folders.

    I have not noticed any troubles with my mac in general. But for some reason when I go into a certain folder in my documents and create a new subfolder I get a spinning ball and it takes about a mintue (no joke) for the ball to stop so I can name it.

  • Compress and change to read-only on a warehouse table partition?

    I found the command to compress a partition. I was wondering if I can also make a particular partition read only or is that only possible at the table space level? This is for a warehouse and we'd like to save space on our partitions that age out of

  • Code Inspector for Module program

    Dear all, in release time, this error is detected by code inspector..............................I/O field (output field) ZZWERKS1 has no accessible label........................how can i hide it. actually for this no pseodo code is available.