Video and audio not matching
I am fairly new to editing so this may seem like a basic question. I am working on a project where there were 2 cameras. I put down the footage from the first camera into the time line. I am trying to overlay footage from the second camera on v2 so instead of a close-up shot, it shows a wider angle shot. Since both camera were going at the same time, I am only using the audio from the first camera. My problem is when I overlay the second camera footage, I can't seem to get the audio to match exactly. Even when I think I have the playhead in the right spot, it seems off slightly. I have tried moving it several times but I can't get it exactly right.
Thank-you in advance for any help you can give me.
what you need to do is find a single frame where you can match with certain frame accuracy
a good example of a frame to match on would be one where a flash occurs (from a stills camera) or one where a subject in camera blinks. double click the upper track to load it in the viewer, find a good sync point frame and add a marker (press M), now do the same for the lower clip, marking the same frame. down in the timeline nudge the clips left or right so that the two markers line up
you might also want to do a little reading on using FCP's built-in Multiclip functionality
Similar Messages
-
Video and audio not synchrone with apple tv after update mountian lion on macbook pro
i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????
Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps. -
Anybody else experiencing video & audio not in sync since upgrading to Lion? I have a MacBook Pro 15-inch, Early 2011 with
AMD Radeon HD 6490M 256 MB graphics. I mostly stream You Tube, Netflix, & news videos and occasionally watch movies I have in iTunes or on DVD, and since upgrading, I've seen out of sync video and audio in every one of these situations. Sometimes it starts out OK and then slowly deteriorates. Other times it just starts out that way and stays that way. Happens with all browsers as well as iTunes and DVD Player. Tried a few Google searches but haven't come across any postings reporting this with Lion, so I thought I would try here. Thanks for any confirmations and/or pointers to a solution if there is one.Ahh...boom. I have it too. Forgot it was even there. I had it turned off back when running Snow Leopard since it was glitchy. Apparenty, I somehow reenabled it and wasn't even aware it was on since its volume was turned down. After disabling it, all video & audio appears to be in sync.
boom...the sound you'll hear as I nuke it from my system.
Thanks efrancis76 for figuring this out. Much appreciated! -
Video and audio not in sync. Other answers here do not help.
My audio and video are not in sync in many streams but some are OK.
I do not have any extensions, add-ons and I am using the default theme. I have disabled hardware acceleration. I am now running in Safe Mode and the problem persists.
The video and audio sync for the first few minutes and then they work their way futhter and further apart, usually several seconds out of sync. I don't think this particular situation has been covered in the other posts.You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting -
Video and Audio not in sync after capture
Hi there,
This is probably a common problem, I have trawled the site but can't seem to find and explanation for it.
I'm capturing vide/audio into final cut pro from my SONY DVR. The video i have streaming into the sony DVR is from a small covert video device which records video/audio onto an SD card. SO I'm running that into the DVR and then DVR is outputting that as DV PAL firewire (uncontrollable device).
I'm capturing the 40 minutes of video as one clip, and when i drag it into the timeline the audio and video are WAY out of sync. Is there a simple reason for why this is happening?
It's almost as if not capturing it right.
I hope someone can help,
Thanks in advance.
Jamie McIntyreIt is interesting that you are having this problem. I recently purchased a brand new Mac Pro (a week ago) and I am using Premiere Pro and it is doing the exact same thing. I mean this video and audio is REALLy out of sync. I tried capturing an hour at a time, and 30 minutes at a time. Still, no luck. I was debating on getting Final Cut, but after reading this post I am rethinking not only Final Cut, but using Apple all together. Part of me thinks that it is not a Premiere or Final Cut problem but a Mac OS problem. But hey, what do I know. I only edit for a living.
-
Video and Audio not synced on .mov file in final cut, but perfect in QT!
I recently just captured a miniDV tape onto final cut. I captured it in 23.98fps. After I captured it and opened it up in final cut's sequence, the video and audio was not synced at all. it's way off and even when i try to move the audio around on the timeline and get one voice synced up, about a minute into the video it's off again.
i tried opening the video in quick time under the captured scratch folder, and when it plays in quick time, it's perfect. there is no sync problem at all. only when i open it in final cut is there a problem.
does anyone know how to fix this or what is going wrong?!
HELP MEwell i mean we recorded it in 24PA, which is what we've been doing for this project of ours. And when we go to capture in final cut we choose the Advanced Pull Down setting. So in the end, our video is in 23.98 fps.
I just thought I'd mention that just to give more details. idk if it's helpful or not -
Hello all:
I'm using FC 4.5 and for some reason the video and audio has decided to no longer link together... even though they are captured as merged files. The Stereo Pair and Link command under the Modify tab seem to have no effect (even though the clips indicate that they are - a line runs through them). Only recently started to occur. Real pain the in the buttocks. Any ideas out there?
Thanks
Adrian SIf diligent work with the link and stereo pair t'aint
What does FCP rescue do... other than trash/restore my settings?
Thanks
A.S.
working, perhaps it is time for FCP Rescue.
It can be found at the site listed below - be sure to
select the appropriate version for the FCP you run.
http://www.pistolerapost2.com/fcprescue/
cheers,
x -
Quick Time 7.67 video and audio not playing in CourseCompass MyMathLab
When I first used MyMathLab through Course Compass, the video and audio played with the digital picture broken up. Since then it stopped running the video and audio. I have tried uninstalling and reinstalling Quick Time more than once without any change. Now when it is trying to load,I just get white screen with Q logo and an arrow running across the bottom of its window.
I forgot to mention I use Firefox. I just updated to Firefox 3.6.9 today. The quick Time problem already existed before I update Firefox.Is there a problem with Quick Time being compatible with Firefox?
-
Video and audio not linked after upgrade to cc
I recently upgraded from 5.5 to CC. Every project that I know open, the video and audio are no longer linked. I right click and enabled is checked. It's a huge pain when editing!!
Another starnge thing, after I reopen a project I'll notice that the audio tracks duplicated themselves??You're welcome.
http://blogs.adobe.com/kevinmonahan/2013/09/11/marking-posts-as-correct-or-helpful-on-the- adobe-forums/ -
When I import the video from my camcorder(JVC GR-HD1U) via firewire the video and the audio do not match. does anyone know how to fix this.
welcome Delta X to the board...
long imports (>15 - 20min) of NTSC content get out of sync, due to some specs trouble (NTSC has 29.95 fps, but audio is an even 48KHz... that "shifts" the audio... known NTSC problem...)
there's a fix on the web, never tried my own, me PAL country:
Movie out of sync fix
I've read reports, to import just smaller segments of your tape (see iM's prefs) could solve the problem too... give that a try... -
Help! I shot a video on miniDV. When I bring it into final cut express 4.0 the first 25 minutes of the 50 minutes is synced perfectly audio and video, and then all of a sudden for no reason the audio and video are not syncing properly. It is not because it's not linked, because just when I preview it in the viewer it does the same thing. HELP HELP HELP! Thanks!
Open the clip in QuickTime and see if it does the same thing there. If so, then there was some kind of glitch at that point in the capture. This happens sometimes and you might consider recapturing the video.
Does the sound go out of sync & stay out of sync by the same apparent amount, or does it drift further out of sync as time goes on?
If the sound doesn't drift (meaning, it just goes out of sync by a fixed amount, say 1 sec) ... and the point where it goes unsync'd is not critical ... you might consider razor cutting your clip at that point in the timeline, unlinking the audio from the video in the portion of your clip that is out of sync, turn on audio waveforms, and then slide the audio clip back into sync with the video. It will take some noodling and you will probably have to zoom in on your timeline, but it can be done. Best to find some place in the clip where there is a sharp sound associated with a motion (a door slamming, for example) - that will make it easier to resync the audio with the video. -
Picture and audio not matching in Photo Booth
Hi, can anyone tell me why when I record a video using Photo Booth the audio doesn't match up to the picture? I recently recorded a video and when I went back to watch it I noticed that the video starts and then like 30 seconds later the sound starts. I tried to make another one and it was better but still off, the second one was only off by a few seconds. Is there a reason why this is happening and is there a way to fix it? Thanks for your time.
I have the same issue. Seems if the video is short, like 10-20 seconds the sound and video sync. But, if it's longer than that, then the sound is off and gets worse the longer the video. This is imbarrising since I have no other means and need to send a video to my professor.
-
Video and audio not in sync (ALSA underrun occurred)
Hi, after a recent system upgrade (upgrade log here http://pastebin.com/1gRwexFr), video and sound are not in sync anymore. The problem occurs in mplayer instantly, and in XBMC after a while (the audio is slowly getting out of sync). The error message I get continuously in XBMC is "ALSA lib pcm.c:7339:(snd_pcm_recover) underrun occurred". The error I get in mplayer is "[ac3 @ 0xf46b40]frame sync error" I did another system upgrade and the problem persists. I'm using Terratec Aureon 7.1 external sound card and linux 3.3.3-1-ARCH. I'm not using pulseaudio, just alsa.
EDIT: I downgraded (sudo pacman -U linux-3.2.13-1-x86_64.pkg.tar.xz linux-headers-3.2.13-1-x86_64.pkg.tar.xz linux-api-headers-3.1.6-1-x86_64.pkg.tar.xz dbus-1.4.16-1-x86_64.pkg.tar.xz dbus-core-1.4.16-1-x86_64.pkg.tar.xz glibc-2.15-7-x86_64.pkg.tar.xz) and the problem seems to be gone. I'm suspecting the kernel upgrade broke it..
Last edited by nawitus (2012-05-02 20:08:53)nawitus wrote:underrun occurred
See what buffer size you end up with. Start mplayer, and run:
cat /proc/asound/card0/pcm0p/sub0/hw_params -
Sound for recording video and audio not working
I have tried everything to get the sound to work. I have reinstalled the audio driver. When I go to soundrecording.exe to see if I can record sound it gives me a message "An audio recording device cannot be found." Please help this is driving me crazy.
well, since people can hear you on a call, it's not a hardware problem with the microphone.
It appears to be something wrong with your recording apps -- the camera (in the case of video) and whatsapp.
First attempt would be to:
a) install another camera app with video capability and see if IT will record audio. and
b) uninstall and reinstall whatsapp to see if that fixes the problem.
If that doesn't work, to a backup, then try a hard reset and re-install the apps one by one, confirming that recording works after each install.
/drt -
audio and video do not syncronize. all forms of videos. music videos to tv shows. what do i need to do the syncronize them again
they are in sync on iPod, but not on computer.
another issue that might be from the same cause is, the order of episodes of the tv shows i have downloaded, they appear in order on computer, but on iPod they show out of order.
any tips on how to fix this would very much help.
thank you.Welcome to Apple Discussions!
An old version of iTunes will cause this and mess up the videos on your iPod. Always make sure you always use an up-to-date version of iTunes.
Make sure all the software on your computer is up to date...
iTunes
iPod Updater
Updating iPod's Software
You will then need to restore the iPod and then let iTunes update your iPod and put your music, videos, etc. back onto your iPod...
Restore the iPod
btabz
Maybe you are looking for
-
Hello, The user is trying to create a Goods Issue wrt a Consingment order, and the system generates an error M7021 : Deficit of customerSt unr. prev 198,800 lb: .This is batch managed . I did check MMBE and there is unrestricted stock for the req
-
Extended Withholding Tax error
I have done EWT configuration. But while posting the entry, TDS is not deducted and no posting to TDS accounts are made. I have assigned GL accounts & done the settings in sequence given in SAP nodes What wrong setting i would have done ?
-
Copy/Paste duplicates graphic styles
Scenario: Start with a named graphic style of say 2 pt black stroke/no fill called '2.0 pt'. Create an object using said style, copy and paste it, every time I do this I get '2.0 pt 1', '2.0 pt 2', '2.0 pt 3' etc. insanely populating my graphic style
-
Where do I get Lens Profile for lens correction in LR3
I have LR3 and need help figuring something out. I mainly shoot with a Tamron 24-70mm. LR3 doesn't list this lens under the lens correction so I can't correct any of the lens distortion. Anyone know where/how I can locate/install this profile? Do I g
-
Using Captivate 5.5 can I translate to different languages?
I Use Adobe Captivate 5.5 to make tutorials for online training. I am wondering if it is possible to also translate into other languages? Is there another piece or add-on I can get to do this?