Video and audio Problem

I have a 5g ipod 30 gig. Sometimes when I play video files, and then try to go back to the menu and select an audio file, both of the files will play. This results in a terrible sounding, distorted sound where I can here the audio from both the video and the song/audiobook. I mean that once I play the audio file, the video file resumes as well so I can hear the sound on both of them. Has anyone else had this problem? Should I send the ipod back to Apple and get it fixed/replaced. Thanks in advance for your help

PLEASE HELP ME

Similar Messages

Video and audio problem, please help!

Every time I stream a video or play a DVD, the video and sound freezes for about ten to twelve seconds continously. It is very irritating and rather inconvenient.
Does anyone have any idea why? I just switched to a Mac and am loving it so far. I would hate to have to take my laptop in.

Toggle Linked selection. Shift-L. Or press the button over by snapping in the top right of the timeline,
-Jake

Adobe premiere Elements 12 video and audio problems

When ever I import a video that was recorded with bandicam both the audio and video are terrible, the video is 360 p and the audio is static. I just bought Adobe premiere yesterday and already having issues. If anyone can help it is greatly appreciated.
The format for the video is: MPEG-1
The audio is: MPEG-1 L2

Bandicam read #10 http://forums.adobe.com/thread/954394

IChat video and audio problems Mac to Mac

My associate and I have just set up video chatting with iChat, AIM accounts, and Logitech Quickcam Vision Pro cameras. I have a 12" G4 Powerbook and he has a late-model G5. We are both connecting to internet via Airports, with cable at my end and DSL at his end. After going through many discussion postings, we adjusted our settings so that Quicktime streaming was set to 1.5mbps, log on to AIM was on port 443 rather than 5190, iChat video bandwidth was set to 500, and Internet sharing was off on both machines. We can now see and hear one another, but the sound quality is very poor (we tried Skype, too, and the sound quality is much, much better) and the images we see of one another are very fuzzy and jerky (very slightly better than Skype, and our local images are very sharp and smooth). Worse, the image I see of him disintegrates (pixelates, horizontal lines, etc.) most of the time; he can see some of this on his local image of himself. The disintegration does not occur on Skype. We would rather use iChat, but obviously cannot with these conditions. I have seen no description of anything like this in any of the first 15 or so pages of discussions. Help!

Hi,
If Quicktime is at 1.5Mbps and you get this try the Bandwidth Setting at NONE.
WE suggest the 500 setting fro a couple of reasons.
Two ISPs, Comcast and Road Runner, practice Data Stream Management to combat File Sharing apps. This reduces the Internet Speed they supply to try and make these applications unworkable.
Unfortunately they can not distinguish between those Apps and iChat in an A/V chat which is also Peer-to-Peer and sending lots of data in both directions.
Other ISPs practice "Fair Usage" Policies and restrict the Bandwidth (And therefore speed) during High Use periods (but never say when those periods are).
The effect is the same as the Comcast/Road Runner issue.
If NONE still does not work try one of the other two setting in-between NONE and 500kbsp.
iChat does use a large amount of processor and Video card time and processing.
It pays to make sure you are not rendering some iMovie item or other high Processor use App.
AS iChat can be effected by Bandwidth issues Sharing the Connection you have with another computer that is downloading or streaming something from the 'Net can be an issue.
It may pay him to look in Activity Monitor (Applications/Utilities) and see what is using the Processor (Set it to All Processes then click the CPU column to re-arrange the list). Anything over about 20% may effect iChat. (vcencoder in lower case is part of iChat)
8:12 PM Friday; January 30, 2009

Pauses in video and audio.

I have the updated version of Flash player. However I still get pauses in the video and audio. What's wrong.

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the user of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video
Non-HTML5 video
Thanks,
Chris

Video and audio linking problem, and others?

So, I am having 2 main problems. When I first started using FCE everything was great. Then, I changed some settings, and for some reason, it doesn't work like I want it to. So, my first problem is linking. When I import, it is automatically unlinked, but I think FCE thinks that it is! When I do press Apple L (shortcut to link video and audio) it still isn't linked! How can I get it to link?
My 2nd problem may be linked to the first. When I want to make a cut right on the playhead, it is really hard to get it on the playhead. Previously, it would just snap on the playhead if I got close, and now it doesn't! How can I get it to snap better?
Thanks for all the help!

1) Make sure linking (Shift-L) is turned on before you add your clip to the timeline. To manually link audio tracks to your video tracks select the two and go to +Modify > Link+ (Command-L).
2) Make sure snapping is turned on in the timeline. Hit the "N" key to toggle it on or off.

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

Having problems with Video and Audio

Hi - I am new to Captivate. I have created a demostration with about 85 slides with audio on each slide. When I preview the project all is fine. When I publish the swf and htm and play on my machine all is fine. However when my colleagues try and listen to the demo, the video and audio get out of sync. The audio seems to go faster than the video. I am not sure if it is due to the sound speeding up or the video slowing down. Has anybody seen this bfore ? Can anybody help ? I am using Captivate 4 with the latest patch

Hi there
I've seen others suggest that adjusting the audio clips for each slide so they begin playing at perhaps .1 or .2 seconds after the slide begins solves the issue.
Perhaps you will have good luck with this approach as well.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

Video and audio (in one direction only) deteriorate after about 90 seconds

I begin a two-way video chat as normal, both parties can see and hear clearly. After about one and a half minutes of normal video chat, the person on the other end suddenly starts getting a highly pixelated image of me, and they start to lose chunks of audio from me. Meanwhile I continue to get a very nice clear video and audio from them. We usually end up closing the chat, because they are unable to hear or see me enough to continue.
The first 1.5 minutes or so is always clear, it starts after that. I always receive good audio and sound from the other party throughout the chat. I have never had problems receiving video/audio.
It happens with most (but not all) people I connect to. I am in California, and I always have this trouble when connecting to a relative in Connecticut. I have the problem again with one relative in Sydney Australia, but not with a different relative in Sydney. These are just a few examples by location.
I have repeatedly tested my connection speeds, and I have good up and down speeds - more than the minimum requirements. (My speed today is 8200 kb/s Down, 1309 kb/s up).
I have also tried:
Checking my Quicktime settings - (set to 1.5 Mbps T1/Intranet/LAN)
Bypassing my Airport modem/router, by connecting directly by ethernet to my Comcast cable modem (which has no router built in)
Replaced the cable modem with a brand new one.
Changed locations - tried it at a friend's house, still had the same problem.
So, I think I have isolated the problem to my PowerBook. This PowerBook used to do iChats really well for at least 18 months. I have been having this issue for about 5 or 6 months now. I have no idea what the problem could be. Any tips would be much appreciated.
Thanks, Martin
My setup:
ISP: Comcast Cable (Cable modem)
Apple Airport Exteme Base Station
Powerbook G4 1.67Ghz, 1 GB RAM, 80 GB HD
O/S: Tiger 10.4.10
iChat 3.1.8 (with Chax)
External iSight camera

With Comcast.
Try rebooting the Modem.
This seems to refresh the connection in some manner.
Also speak to them. They may not admit any connection management but thing may "magically" get better.
1:17 PM Wednesday; August 29, 2007

ITunes 11.02 update - video and audio no longer working

I updated to iTunes 11.02 last night.
Now, I can't play any video or any audio files, whether using iTunes or Quicktime. Even online Vimeo and YouTube content won't play. Clicking the play button does nothing - the movie or song's progress indicator doesn't move.
In Sytem Preferences > Sound: I get the following message for input and output devices "No input device found" and "No output device found"
There doesn't seem to be a way to check if the graphics card is recognised but it's still showing up in the system profiler.
Looks like the iTunes update has completely nixed my laptop's video and audio capabilities. Does anyone have any recommendations?

I do a lot of SONY HRD FX1 native 1080i HDV capture with Final Cut Pro 5 on my PowerBook 1.3 GHz G4..
Before Apple started supporting HDV, getting the audio and video lined up was such a nightmare that it wasn't even worth working on projects.
My material works great inside FCP 5, but I have had similar problems to what you describe when making the DVDs
However, I use DVD Studio Pro and was able to move the audio relative to the video slightly to get the most important parts to line up. However if your audio and video clips aren't the same length then you will have variable slippage for long clips.
I have been using MPEG Power Professional (Heuris Inc) to do my MPEG2 video encodes as well as my audio encodes and I haven't had the problem lately.

Video and audio crashes with communication error -8.

Hi, I sure could use some help please.
This is my problem, I can no longer use iChat on either of my computers which both have systems 10.4.10 and 10.4.11 in them. IChat version is 3.1.8 in both computers, my 2003 G4 eMac and my new Intel Core iMac.
I get a communication error -8 that comes as soon as I click on the video camera to connect to anyone.
I use no firewalls, my ISP server doesn't either and they block NO ports.
IChat used to work before I upgraded to system 10.4, in fact it even worked on dial up before I got high speed internet and it worked on high speed internet before the upgrade. One of my computers is brand spanking new, the iMac with system 10.4.10 in it.
I have automatic quicktime streaming and when I did try other setting, it made no difference.
I've called Apple and they had me remove plists from library preference folder but that made no difference either.
Both my cameras work for Skype and for yahoo. I'm bewildered. Can anyone help? I'd really like to have my iChat video and audio work again. (My audio gets the same error)
Thank you,
Martha

This post fails to say that the original computer was direct to the modem and now there is a router involved.
I also think I remember there was something else but my memory eludes me.
The info is in another thread.
7:40 PM Saturday; December 22, 2007

Video and audio not synchrone with apple tv after update mountian lion on macbook pro

i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I. We are able to do video chat through gmail, but I had hoped to use iChat. I am using OS 10.6.8, iChat v. 5.0.3. What am I missing?

HI,
iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
However it will not Video to the Web Page login to iGoogle or the Web Mail Page login. (where people can Google Chat as it were in a Web Browser).
Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
More on this here This article has been changed several time in the recent months. It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
It could be Internet speed but at this stage I would doubt this at this stage.
10:27 PM Saturday; January 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Video and audio Problem

Similar Messages

Maybe you are looking for