Video and Audio Track Destination in FC Pro

Sometimes my Source Bar (In the Timeline) doesn't allow me to execute it. That is in the video and audio tracks.
g-5   Mac OS X (10.4.6)  

Hi there,
I just came across this problem. I had a clip in the viewer with video and audio and a sequence in the timeline. But somehow FCP wouldn't let me edit the video into the timeline, I couldn't patch the video.
So I opened up another sequence. Same thing.
Third sequence, and the video track selector miraculously appears.
Any ideas? After I quit and restarted FCP, it all worked normally.
Tales from the not-so-far-side, I guess.....
Cheers,
Colin
PowerMac G5 2.5GHz DP and PowerMac G4 500MHz DP    

Similar Messages

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Can I link and lock video and audio tracks - layers - as in Photoshop?

    I'd like to link and lock entire clips of video and audio tracks, as I might in Photoshop, so that I can insert some material ahead of this group without having to move each separate tack in my timeline. I have a group of clips which works well together now, and it would be so nice to be able to link them, lock them together as on unit, and just insert the new material into the timeline ahead of this piece. Any ideas?

    alann
    What version of Premiere Elements and on what computer operating system?
    For now, a generalized Premiere Elements Windows answer.....
    You would select all the clips (all at one time) that you want to move together, then Clip Menu/Group.
    Or right click anywhere in the selection to bring up the pop up menu including the Group option.
    Have you been there and done that yet?
    Please supply more information so that we can fine tune the information that you seek.
    Thank you.
    ATR

  • Can't play Video and audio tracks.

    What software components are necessary to play the video and
    audio tracks on OTN.
    I'm using Windows 2000.

    Most of the iDevelop 2001 videos and audios require a Real
    Networks player.

  • How many video and audio tracks now?

    If there is one single bad thing in iMovie is the lack of tracks. Most "consumer editors" would like at least 3 sets of stereo audio tracks and the titles would be nicer on a separate track. But in the iMovie site there is no mention to those things. Strange, every video app site has some specs about video and audio tracks, even the free ones.

    Hi John,
    Unfortunately the iMovie '06 has the exact same arrangement as '05: One video track and two audio tracks. I was so badly hoping for at least a second video track in the new version because that makes things so much better, but for some reason they didn't add one. They probably know that less people would shell out $300 for Final Cut Express if they added a second video track to iMovie. sigh
    A big disappointment.
    ~'kito

  • Combining Separate Video and Audio tracks

    Hi, what's the best way to combine a video and audio tracks into a single file? We will be given the video and audio from 13 volleyball games, and each game will be coming as a file.mpg (mpeg2) video and an mp3 file.
    We're looking for a way to either manually bring it in, or bulk automate a way of combining the two tracks for each game to have one file that is in a format that doesn't need to be rendered in FCP.
    Thanks!

    Seems like there should be some way to combine clips somewhere though? < </div>
    Not if they're form separate devices or in different codecs. the MPEG2 files are the big problem, next time, have your people shoot conventional DV and use the audio interface to bring in a feed from your announce booth or radio station or whatever so it's in sync.
    bogiesan

  • Independant video and audio tracks separate

    I am using Premiere Elements 12 on a PC. I am working on a multimedia project combining video, stills and audio. Independant video and audio tracks separate when I insert a still image on another track. The tracks are not grouped or linked together. I do not know how to prevent this happening. The manual suggests pressing the Alt button when inserting but this does not work.

    skinnymurray
    Holding down the Alt key of the computer main keyboard does work and works well under most ordinary conditions. Please practice and refine your Alt technique with care patience. But....
    Have you tried keeping certain parts of your established track content together by using the Group command after selecting a
    bunch of clips all at one time?
    Please review the following free online video tutorial which I post for informational and non promotional purposes
    https://www.youtube.com/watch?v=IqRT8OzdxVc
    I am having a lot of trouble with Internet connection today due to local storms. The above link was snowy when I viewed
    it but it should be OK if your Internet connection is OK. I will monitor this situation. The information given in that video tutorial relates to your question.
    We will be watching for your results.
    Thank you.
    ATR

  • Video and audio tracks not synchronized after importing

    When I try to watch a video in quicktime or itunes video and audio tracks not synchronized. If I wach on another player they are synced. Anyone help?

    John:
    Thanks for your reply.  Excuse my referring to you as "Kevin".  I'm new to the Adobe Community.  I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself.  I'm going to try both solutions.  Whichever works I'll be sure to reply to the thread with my findings.  I found this article which provides the following solution:  http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

  • Video and Audio Track Selection

    Is there any quick way to do this? Nothing in the keyboard shortcuts menu that seems close to "Sleect Video Track 1", "Select Audio Track 1", etc. Is it only achieveable with a mouse? Thanks all.

    I have made custom keyboard shortcuts for video and audio tracks using Toggle Track.
    I use numbers 1 to 7 for Video and Shift 1-7 for Audio.
    In conjunction with Mouse clicking and shift mouse clicking on tracks..does all that I need.

  • Is it possible to group video and audio tracks separately in the timeline?

    Currectly tracks are ordered like this:
    video
    audio
    video
    audio
    video
    audio
    Can I arrange them to look more like:
    video
    video
    video
    audio
    audio
    audio
    Since I get to use both Premiere Pro and Final Cut Pro frequently at work, I would find it more natural if audio and video were grouped separately.

    You are welcome.
    I find it interesting, as about 10% of the users of PrE would like to arrange the Audio & Video Tracks in the form of PrPro, however, about 10% of the users of PrPro would like to arrange them like PrE!
    Personally, I find the PrPro arrangement (as you were requesting) to be the most logical for my workflow. I do my Video first, and like all Tracks grouped atop the divider line, and when done there, move down to my Audio. I still get lost and confused in PrE, because of the grouping there.
    Now one little tip, that might help you a bit: one can Add, or Delete Tracks pretty easily. I have a Sequence (think multiple Timelines in PrE) Preset that gives me 4 Video Tracks, 1 mono Audio Track, 4 stereo Audio Tracks, and a DD 5.1 SS Master Track. This is the "average" of the normal Timelines that I work with. When doing an edit, where the extra Tracks are not needed, I choose Sequence>Delete Unused Tracks to "clean" things up a bit. Then, I am only looking at Tracks (Video and Audio) that are in use.
    Good luck,
    Hunt

  • Two video and audio tracks, only need one audio

    Question- I recorded an event- about two hours long. I used two cameras from two different angles. The main camera has the worst audio whereas camera two is best. I want to use the audio from the camera 2. I know how to do this by syncing them up, "turning" down the video from cam 2 and turning down audio from cam 1, BUT here are my questions:
    1- I want to make sure the video fits on a 4GB DVD when project is finished. Will the size of the project double because I have two videos on the same timeline? If yes, is there a way to delete the video or portions of from one camera to save on the size of the overall project after converting to Quicktime?
    Thanks to anyone who responds!!

    Will the size of the project double because I have two videos on the same timeline?
    No. It all gets rendered to a single video track.
    Whether your finished product fits on a DVD has to do with the running time. Two hours will fit easily.
    Your Final Cut Pro master file could be 300 GB for example, it all gets transcoded to MPEG2 video and ac3 audio for the DVD.

  • Detaching separate video and audio tracks

    If I import a video file without audio, and then a music file, why does FCPx snap them together in a way that, if I want to move the first 20 seconds of the clip further away, when I move it forward, it takes the audio track with it?, how can I detach it?    

    As you can see in the image attached, theese green lines seem to keep united both tracks (or track sectors)

  • Splitting video and audio tracks

    Hi folks!
    I'm a newbie to the whole world of mac and this is my first time using imovie. What I am trying to do is to split the video track and keep the audio from it and run that over another video track, then come back to the original video track... so basically putting in a cut-away... is this possible with imovie?
    Thanks for any help you can give!
    Kate xxx

    Hi - I was getting help from someone else on this aduio issue - and saw this post, so hope you don't mind my asking you too -
    I extracted the sound out of a video clip. The track of sound got put doen below the clip, like it should. And it zerod out the original clip audio as it should.
    The 3rd audio track is a separate song, that plays over the video track. When I play the timeline back, all is fine. But when I record the dvd [and I have tried over 20 times in various ways this week], even though the preview [I am using Toast 6] shows the movie playing right, when the recorde dvd comes out, the audio that I extracted and deleted, still plays. [and the song plays right, but is suppose]. I have clicked on the video clip, and it shows 0% ...
    ANy thoughts? i movie 5, G4 [ps - I've made movies before and haven't had trouble]

  • Separate Video and Audio tracks

    After I've opened a new project and dragged the clips into the timeline, the Audio and Video tracks suddenly are separated. Their pôsition is changed an the video track is on track 1 while the audio is to find on track 6. (see image attached) There is no way to drag them together, also by first having them disconnected. Does anybody know how to bring them both together on their track 1 as it use to be and as illustrated on the second attached image ?
    Joined tracks

    Thanks Bill,
    How do I get acces to the main forum ?
    But isn't it so that if you import clips containing 5.1 surround, automatic a 5.1 channel audiotrack is added to the project.
    When I do this, the audio channel is created on track 6, although I have the preset of the standard timeline by starting a new project put on 3 audio and 3 video tracks.
    Tracks 4 and 5 don't exist.
    When I load an old project with the normal timeline, i still can add clips by the usual way. Everything works normal.
    When I try to drag the audio track to the track Audio as it use to be thits place, both tracks jumps two tracks higher.
    I compaired the old and the new project and find no difference in the presettings.
    I am desperate because it's useless to start new projects with this failure.
    Many thanks in advance to help me anyway.

  • Clips - video and audio tracks

    Hi all. I am quite confused about the a couple things when adding a video clip to the timeline...
    First, when I add the clip I want the audio to be added to A1 and A2, but I am not sure how to make sure the audio tracks go there rather than other audio tracks - they seem to want to go to A7 & A8. I tried selecting and deselecting the auto select buttons of the audio tracks, without either helping. I tried looking through the manual for help but did not find help (or did not understand what was there).
    Second, when I add the clips now, only 1 audio channel is added (to A7) if I add the clip from the Bin to the video track. If I drag the clip to the audio section of the timeline, both audio tracks are added as is the video. I could move the video if I want, but doing things this was does not allow the audio and video to be linked.
    I do not know what is going on here.
    Thanks in advance for the help.
    Larry

    What video track are you using? V4? With default patch, (v1/V1, a1/A1, a2/A2), I think a video clip put on V4 will send audio to A7 & A8. In other words, default patch will retain relationships among V1/A1/A2, V2/A3/A4, etc.
    Move your v1 patch to the desired video track and leave the a1 & a2 tabs at A1 & A2 and your audio should go to A1 & A2.
    A side question: Why does it matter? You should mix down your audio before export anyway.
    If none of this helps, you might try trashing the FCE preferences, always a good idea when the app behaves strangely. Here's how:
    http://www.fcpbook.com/Misc1.html

Maybe you are looking for

  • Need help with connecting file inputs to arrays

    In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays. That w

  • SAP Script Program Code

    Hello, I want to write a patch of code in SAP SCript which will fetch multiple lines of data(no of lines fetch is unknown). How can I do it? I tried Perform Endperform but it had limit to the varibales it can send back. I don't know the line items(va

  • JTable header : text = two-rows, onClick action = sorting

    Hi guys. I want to create a JTable where the user can have the data sorted by clicking upon a column's header. The code below shows the table I describe (you can click upon a column and sorting is performed). import javax.swing.JFrame; import java.aw

  • How to insert special symbols into mysql?

    im parsing data from xml and inserting values to the mysql database .. no problem in that, values inserting fine.. when i try to parse "Σ" n ary summation and insert to mysql the symbol is replaced by "?" im using toad for mysql i have tried prepared

  • How to create glass effect??

    hi i wish to creat a mobile phone on screen and wish to know if it is possible to produce a glass screen? any help would be great thank martin