Video and audio transmission from MacBook to TV

Since I really get mixed up with various posts about connecting MacBooks to a TV set I would love to get simple answers to the following questions:
How can I connect my MacBook to a TV so that I have video and audio rendering? My MacBook has a mini-DVi output, my TV set has VGA, HDMI, and audio inputs. Since to my knowledge HDI carries no audio signals I suspect that I need an extra audio connection. Is this true?

to rapanuii
depending on your macbook model you may need a "converter", meritline.com/mini-hdmi-to-cvbs-converter-adapter---p-83103.aspx?source=fghdac& gclid=CO7J9NSU67QCFWGnPAodRBsAAw similar to this. Use a mini DVI to HDMI apple adaptor. if you have RGB connectors on your tv you want http://www.monoprice.com/products/product.asp?seq=1&format=2&p_id=8125&CAWELAID= 1329456201&cagpspn=pla&gclid=CKW25beg67QCFaGPPAodRHAAfg

Similar Messages

How to transfer video and audio files from windows PC to new ipad?

How to transfer video and audio files from windows PC to new ipad?

iTunes: Syncing media content to iOS devices and iPod
Sync with iTunes.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on all of the albums, artists, playlists that you want to sync
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
Follow the same procedure for Movies.

Cutting and saving individual video and audio files from a clip

I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

Without knowing more about your project, it's hard to even guess at the most efficient workflow.
Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
Good luck.
Russ

Video and audio latency from 6 seconds to 4 seconds

Hello,
I have developed a video transmission and viewing application . I am facing a problem of one way video latency of about 6 seconds.
Adobe says that the latency can be reduced to about 3 seconds one way. I have set up the buffertime for transmitter about 3 seconds.
Please can anyone suggest me how to reduce the latency from 6 seconds to about 3 seconds ??
I have no issues regarding the bandwidth , but can anyone suggest the proper optimization technique for CPU and memory usage .
What should be the ideal configuration for minimum latency.
Currently my audio and video transmission one way is 6 sec and hence 2 way for both is 12 -14 sec.
Kindly guide me how to resolve the problem.
Thanks,
Chinmay Chitale

phosphene
followed your instructions and as soon as I tick "multiplexed Mpeg-1/layer 2 audio" the m2v extension changes to mts. This won't play in Quicktime even if i change the extension to mpg, m2v or whatever. I'm assuming i need a quicktime plugin to fix this.
Andrew

Video and Audio tags from compressor??

Hey guys,
I have some thing Im trying to solve. I have an audio and video podcast that i run through compressor every week and would really like to add all the meta-data straight from compressor. Its a pain to add to itunes and then grab that file and finally upload to the FTP server. If compressor cant do it, is there a simple app that I can use to just edit the data with having to add it to a library at all. Thanks in advance.

Sorry not to be able to answer this for you immediately, I'll be watching for my own benefit. We will be facing a similar situation soon.
If you have CS4, you can explore the XMP file system.
bogiesan

Video and audio files from dvd using FCP

Hi
Trying to get footage from a dvd using fcp. I can import the clips ok using file >import but they have no audio with them and the audio folder on the dvd is blank...any ideas????????
cheers

The audio_TS folder is normally blank.
You need to use MPEG Streamclip to get the DVD files to Quicktime.

Using video and audio signal from a camera connect...

Why is it not possible and is skype intending to implement the ability to use the video signal form a digital camcorder connected to a tv?
A lot of people these days have digital camcorders or digital cameras that produce video signal. Why can't those be supported as video input by skype?

BC825 wrote:
..... Previously I had a HDMI to DVI cable and I had to awkwardly move the image off the PC monitor to the HDTV but with no sound. Should I send the equipment (Kanex VGA to HDMI converter and associated cables) back to B&H while I can still return them and get refunded....
Hi,
The following ports are at the back of your computer:
Figure 4: Back I/O panel
1 - USB 2.0: 4
2 - LAN
3 - DVI-D
4 - D-SUB port (VGA port)
5 - Audio: Line in
6 - Audio: Line out
7 - Audio: Microphone
You already mentioned DVI-HDMI : it works but no sound. That's true because DVI does not carry audio signals. All you need is using RCA cable to connect port #6 to your TV.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No picture etc. on TV.after connecting S video and audio cables fr.HP dv4305US and old Samsung

No picture coming from TV.after installing S video and audio cables from HP 4305 US to 6yrs.old Samsung TV.Much appreciate info on how to correct this.Do I have to have cable TV or a digital TV.converter?

Hi eb
Welcome to Apple Discussions
Could be a bad Dynex adapter, return that one for another and/or cough up the extra $3 for Apples.
I'm now using a Mini-DVD to to DVI and a 21.5 LG monitor, but my Apple Mini-DVI to Video adapter and my 27" Sharp served me well for a couple of years.
See the Tip in > http://support.apple.com/kb/TA23844?
+Tip: To make sure that your iMac automatically detects the external display or projector, be sure you plug the adapter into the external display or projector before you plug it into the iMac.+
Dennis

Video and Audio Issues

I am having troubles with playing videos and audio on my macbook pro. When attempting to play videos, the video generally stops playing after 2-3 seconds. The audio starts out choppy and eventually doesn't work at all. This issue persists on all browsers (safari, chrome, firefox), with both flash and HTML5 players. HTML5 players generally seem like they are fast forwarding for 5 seconds then stop. I have tried re-installing flash player and clearing the cache, but that does not fix the issue. I have also logged into a guest account and the issue still persists. Any advice on how to fix this would be welcomed, thank you.
Model Nam
L3 Cache: 3 MB
Memory: 4 GB

I have also tried getting rid of add-ons as well, which doesn't work either. Any ideas?

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

Fastest way to transfer video and audio from MacBook to TV?

Hello All,
Thanks for visiting my page. I would like to transfer video and audio from my Macbook mid-2010 (specs below), and would like to do so with minimum lag. I m aware Apple TV has a feature which allows me to do that, however considering it is connected via either wi-fi or bluetooth (not sure which) I feel streaming an HD movie or playing an MMO will cause significant lag and/or a distorted picture.
So with that said, what is the best way to transfer video and audio with minimal lag?
Also, as a part II of the question, will the picture be distorted regardless if my TV is 60 inches?
Thanks for the feed back!
Macbook Specs:
Processor 2.4 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software OS X 10.8.4 (12E55)

The easiest and most reliable option is to connect your Mac to the TV wired. Just buy a Mini DisplayPort to HDMI adapter and a HDMI cable to connect your MacBook to your TV. See > http://support.apple.com/kb/HT4241 Image and sound will appear on the TV automatically.
If the adapter and cable are OK, you won't get the picture distorted. Your Mac will try to use the maximum resolution the GPU allows in order to adapt the picture to your TV. It may not support the maximum resolution of the TV, but picture won't be distorted

What do I need to transfer video and audio from my 2009 Macbook to my television?

I want to watch a movie with my family tonight, but the DVD is broken. I was planning on renting the movie online and transferring the video and audio from my Macbook to the television. What cables will I need to accomplish this? Also, does anyone know, were I to use a Windows instead, would transferring the audio be simpler? (And what would I need to do that?)

Try doing it without a cable!
Use AirDrop, described here:
http://support.apple.com/kb/HT4783
UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
Message was edited by: sberman

With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV. Any way to do this?

I am trying to get audio to play through the soundbar attached to the TV for great sound. Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers. If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all. The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV. I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar. Any solutions will be appreciated.

its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
power down your Mac
connect firewire from camera to Mac
power on camera and insert tape in camera and play back
power up Mac
start QuickTime
File > Preferences > record tab
video source - select the camera you have
sound source - select the camera you have
quality - select device native
the video should show in the QuicTime window
a green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
rewind tape and playback
click on red button to start recording

Video and audio not synchrone with apple tv after update mountian lion on macbook pro

i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

Video and audio transmission from MacBook to TV

Similar Messages

Maybe you are looking for