Video and Data files together

I never had this request before! How do you (steps please) import and burn a Video file along with PDF files together in DVDSP that when opening the DVD on their computer they will be able to download the PDFs?
I very much would appreciate an answer. Thanks!

Hi Again,
Eric is correct, but I believe you said "Open on their computer",
that you can do,
Assemble your PDFs in a folder named as you wish,
put that folder in another folder and note it's location.
in your DVD project, select the disc in the outline tab,
go to the disc inspector>general tab, look to the bottom,
check the box and navigate to the outer folder only (not the inner one)
check the file size to make sure you have room on your disc,
that oughta' do it.
and again, Eric is correct, this will not function on a set top box.
J>H<L
(edited to correct spelling)
Message was edited by: KADVD

Similar Messages

  • Hi, I have recently updated my iMac from OS x mountain lion to OS X Mavericks. After that I can't upload any video and some files to my personal email account. Can anyone please help me to sort this problem.

    Hi,
    I have recently updated my iMac from OS x mountain lion to OS X Mavericks.
    After that I can't upload any video and some files to my personal email account.
    I have tried to send a small video clip to the sender as attachment. i have done this before
    with the same video same and same email account. This problem found just after installed the
    OS X Movericks. Can anyone please help me to sort this problem.
    Thanks.
    Roman

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in earlier versions there is only one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • EMIEsitelist and EMIEuserlist hidden directories and dat-files

    2014-04-05
    Cross-posted from
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-security/erniesitelist-and-ernieuserlist/00407bd2-e349-423c-a8e5-cb6127840ea5
    Original Post dated April 21, 2014
    EmieSiteList and EmieUserList
    Microsoft Security - Privacy Concerns
    I found two unknown directories on my PC in my user profile.  I have, so far, been unable to identify what put them there, which process owns them, and when I delete them (using Admin escalated privileges) they come back after a few minutes or immediately
    after reboot.
         c:\users\USERNAME\appdata\local\EmieSitelist\container.dat
         c:\users\USERNAME\appdata\local\EmieUserlist\container.dat
         C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
         C:\Users\USERNAME\AppData\LocalLow\EmieUserlist\container.dat
    It was time, anyway, so I wiped the drive using factory low-level overwriting and performed a clean install of Windows 8.1 Pro using a freshly downloaded ISO from Microsoft; one with an ESD distribution, written to a new just out-of-the-bedamned-hardshell-plastic
    flashdrive..
    I just completed the clean install, in this sequence:
    Boot to flashdrive and let Windows create partitions then install.  Reboot.  Check AppData; no folders found.
    Activate.  Check AppData; no folders found.
    Run first Update; install everything except Bing Bar and Desktop.    Check AppData; no folders found.  Reboot.  Check AppData; no folders found.
    Add Feature Windows Media Center.  Check AppData; no folders found.  Reboot.  Check AppData; no folders found.
    Run Updates a second time.  Check AppData; no folders found.  Reboot.  Check AppData; no folders found.
    Remove MS C++ v12 x86 and x64 installed during Update.    Check AppData; no folders found.  Reboot.  Check AppData; no folders found.
    Download from MSDN (http://msdn.microsoft.com/en-us/vstudio/default) Redistributables MS C++ x86 and x64, 2005, 2008, 2010, and 2012.4 versions, and install in sequence.  Check AppData
    after each install; no folders found.  Reboot after each install and check AppData; no folders found.
    Run Updates a third time.  Response was No Updates Available.  Check AppData; no folders found.
    Reboot.  Check AppData; all four sub-directories are now present.
    These sub-directories and dat-files are not, so far, present in the AppData\Roaming directory.
    There is nothing except Microsoft Windows 8.1 Pro WMC and the 10 MS C++ packages installed; and MS Silverlight and AMD (videocard) Catalyst Control Center on the machine.  Windows Defender is present but is installed as part of Windows 8 and 8.1;
    and its' updates are provided via the MS Update process.  All - repeat ALL of these items are provided by Microsoft.
    My questions are:  What are the Emie directories for; what program created them, and what does the various container.dat files "contain"?  And . . . if not absolutely necessary, How do I get rid of them and keep them from coming back?
    First attempt at Solution:
    Permissions are Full for System, USERNAME, and group Administrators.  The USERNAME is the Owner, and Effective Permissions for each of the 3 is Full.
    Open Command Prompt (Admin)
    C:\Windows\system32>cd\
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList\container.dat
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList\container.dat
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList\container.dat
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList
    C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
    C:\>
    BOTH Files and Directories are no longer Hidden.  The Directories still show that the files within are READ-Only, but checking the actual file shows that it is no longer R-O.
    I then deleted each of the 4 directories and  closed Windows (File) Explorer.
    After less than 3 minutes reading pages on the internet (at Microsoft's Ask Windows Community), I opened Windows Explorer to check and found that the sub-directories had re-created themselves in both the Local and LocalLow directories.
    The container.dat files were back in the Local sub-dir and after another few minutes, also back in the LocalLow sub-dir.
    Both the sub-directories and the container.dat files are once again Super-Hidden.
    Analysis using Windows utilities and SysInternals and NirSoft tools have not identified which object or process or service owns these objects.
    ADDED:  My system is a home system, not connected to any work domain via VPN or otherwise.  WHY is the Windows Update Team not spending time to implement condition-and-error-checking to ensure that unneeded updates, services, and changes are not made
    without the system owner/operator permission?  Further, WHY is this particular issue so hard to find info about; what is being kept from customers and why?

    Dear sir Shovel Driver,
       About:  EMIEsitelist  and  EMIEuserlist
    .., hidden directories and dat-files
    Internet Explorer 11 (on Windows 7 and Windows 8.1) provides increased performance, improved security, and support for the modern technologies like HTML5 and CSS3 that power today’s Web sites and services. By adding better backward compatibility with
    Enterprise Mode, Internet Explorer 11 now helps customers stay up to date with the latest browser—and facilitates using the latest software, services, and devices.
    IE11 Enterprise Mode can be set in the Group Policy Console, or by adding a
    Registry setting:
    REGISTRY:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main]
    "EnterpriseMode"="Disable"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode]
    Or a edit a Group Policy setting, which you can find under:
    [Windows-Key]+[R]->[Run]->Type here:
       gpedit.msc
    Press [Enter], with an UAC Warning:
    Do you want to allow the following program to make changes on this computer:
    gpedit.msc ?
    Select/Press: Yes
    Go to in the Left pane of the GPedti.msc Window:
      Computer Configuration
      Administrative Templates
      Windows Components
      Internet Explorer
    Change / Add at right list, down under:
      "Use the Enterprise Mode IE website list"
    Set this option to - whatever you need;  Disabled,
    Enabled (Default is: Not Configured)
    When Enabled, you need to add a list with Web-Sites, Domains or Web-Pages.
    This policy setting lets you specify where to find the list of websites you want opened using Enterprise Mode IE, instead of Standard mode, because of compatibility issues. Users can't edit this list.
    If you enable this policy setting, Internet Explorer downloads the website list from your location
      (HKCU or HKLM\Software\policies\Microsoft\Internet Explorer\Main\EnterpriseMode),
    opening all listed websites using Enterprise Mode IE, Web-Sites are seperated by a sign: "
    If you disable or don't configure this policy setting, Internet Explorer opens all websites using Standards mode.
    Now to
    properly close and conclude this
    mystery:
    EMIEsitelist and EMIEuserlist
    .., are hidden directories and dat-files
    Thses directories and dat files are used to store data for the IE11
    EnterpriseMode.
    It is not a: Virus, neither it is a Trojan, Hoax, KeyLogger or anything else bad.
    TECHNET Sources:
     Turn on Enterprise Mode and Use a Site List (Deploy):
     http://technet.microsoft.com/en-us/ie/dn262703.aspx
     What is Enterprise Mode?:
     http://technet.microsoft.com/library/dn640687.aspx
    If you find this usefull, please Vote at the button
    "I Find This Usefull"
    Thank you! ;)
    Best regards, MPVS
    MP|VS

  • How do I import video and sound files from a hard drive into Final Cut Pro X?

    I just installed the lastest upgrade to Final Cut Pro X.  I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer? 

    File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

  • How to transfer video and audio files from windows PC to new ipad?

    How to transfer video and audio files from windows PC to new ipad?

    iTunes: Syncing media content to iOS devices and iPod
    Sync with iTunes.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums, artists, playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Follow the same procedure for Movies.

  • Cutting and saving individual video and audio files from a clip

    I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

    Without knowing more about your project, it's hard to even guess at the most efficient workflow.
    Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
    As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
    Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
    Good luck.
    Russ

  • Video and audio files hosted on your site

    It would be great to be able to host your own video and audio files and not have to rely on YouTube or Vimeo.  Design a widget to for ease of use.

    Yes, you can easily work with only audio or only video from a video clip in Premiere Elements.
    How you do this depends on which version of the program you are using.

  • Sharing Photo, Video and Music files

    My new iMac has arrived and I'm looking forward to transferring across all my files at the weekend and to starting to use it.
    We use the computer as a family computer although we have different accounts on the computer. I would like to enable all members of the family to have access to all photo, video and music files when they are signed into their individual accounts and using iLife.
    My question is this: where should I place these files to enable common access. At the moment they are stored under my user name and therefore only I can access them. A slight refinement on this is that although I want to encourage the kids to use iLife and develop their skills in this area, I want to make sure that they don't delete/alter any of the original files so would ideally like them to save any changes they make in a new file under their accounts.
    Hopefully this makes sense!

    harris101
    I want to make sure that they don't delete/alter any of the original files so would ideally like them to save any changes they make in a new file under their accounts.
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    To protect your own user account:
    Create a new Account on your Mac, call it Media. Create an iPhoto Library there. (BTW: This will work for iTunes too.)
    Enable Sharing on the Library:(Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other accounts. In those accounts, enable 'Look For Shared Libraries'. The Library will appear in the other source pane.
    This means that both users will be able to see the pics. If you want to use a pic then simply drag it from the shared Library to your own in the iPhoto Window. This means that each user can have their own edits.
    If you want to add photos to the Library: Log into the Media account for that purpose.
    To make it all seamless: Set your Mac to log into the Media Account automatically. Set iPhoto to launch on log-in. Then switch to your own account using Fast User Switching.
    Net result: a Library that's permanently available to all users but also protected. Each user can have their own versions of the pics if they want.
    Regards
    TD

  • HT3775 why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

    why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

    why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

  • Cant find transfereed video and music files

    i transferred some video and audeo files from my computer by blue tooth to my nokia lumia 630, but cant findwhere to find them to play

    This is the link to the app that @adrianhughes is referring to: http://bit.ly/1oSEpFp

  • Dragging video and still files into a atom strand template

    How do I drag video and still files into an atom strand theme template in Motion 4? I am trying to do it but the opened file keeps snapping back to the file list.

    The templates can be challenging to modify.
    In that template, it's not the camera that's being animated, it's the group containing the camera. If you select that group, and set the Keyframe Editor to view animated keyframes, you'll see them.
    To modify them, it may be easier to show them in the Timeline so that the keyframes at each frame are bundled into one object and therefore easier to move. But if you are new to Motion, you are diving into the deep end of the pool here.

  • I'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

    i'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

    Thanks for your suggestions. I checked to see if the options you suggested were set incorrectly but they were set to sync all. This led me to think the problem was actually in the iphone. I re-initialized the iphone and did not allow the system to restore any of the previous settings. In essence, I forced the phone to reset to factory settings. Then my video podcasts started syncing. All is well now. I did notice that I had seven podcasts selected that were "HD" presentations, and as such, are not compatible with the iphone. I don't know if this had anything to do with my earlier situation, but now I'm getting the video podcasts automatically. I'm happy. It wasn't much fun forcing the iphone to forget all of my preferences and I'm still customizing the phone now several days later. I think I have everything working and back to normal except I haven't identified any of my email accounts as of yet. Thanks for your help.

  • Cofiles and data files in trans dir

    hi everyone,
    We will be doing a lot of transports in a day or in a week. What will happen to the older cofiles and data files in their corresponding directories? will they be removed from trans/data and trans/cofiles automatically or do we need to take back up of these directories?

    Actually there are 3 transport profile parameters which can be used to control this:
    1. DATALIFETIME
    2. COFILELIFETIME
    3. OLDDATALIFETIME
    Check more here:
    http://myadmin.wordpress.com/2007/02/19/sap-r3-correction-and-transport-system/
    Also OSS notes: 41732 &312843. They will clear some more concepts.
    Regards.
    Ruchit.

  • How to transport the CO and DATA file to SAP system

    Hello Experts ,
                          I want to know the procedure to import a transport request into an isolated SAP system ( which is not in the transport route ) using the CO and DATA files .
    I know that user should have adminstrator role to do this but i dont know how to do this .
    Regards
    Vivek

    Simply copy the source cofile and datafile from the source system to the target system and then import.
    Data file is located at /usr/sap/trans/<sid>/data with format R<transport_number>.<sid> and cofile is located at /usr/sap/trans/<sid>/cofile with format K<transport_number>.<sid>
    Copy them to the same location on the target system and then go to STMS -> Extras -> Add -> insert the name of the transport in format <sid>K<transport_number>, this will add the transport to the import queue then just simply import the transport.
    Regards
    Juan

  • I currently have Lion, when I upgrade to Mountain Lion, all my apps, music, videos and other files will be erased?

    I currently have Lion, when I upgrade to Mountain Lion, all my apps, music, videos and other files will be erased?

    Lion dropped application support for PowerPC. An OS may drop or change what to use to open a file, not the file.
    Of course CCC is what many have used for 10 yrs now and it is or will be $20 like SuperDuper - commercial.
    Always use something like those in addition to or instead of TimeMachine.

Maybe you are looking for