Video and display

I put videos on my i-pod and they used to play normally, then all of a sudden it started acting up my vidoes are all scrambled and staticy and now there are little black lines on my screen that keep spreading, it started off as two little black spots right in the middle of my screen and in the matter of four days spread all the way across the screen. My music still plays normally it's just the video and these lines. Do I have a virus in my i-pod or something.

Have you tried the basics?

Similar Messages

Jerky Video and Display Driver Error

We use CS3 at our production house. My editor has told me he is now getting jerky videos and the following error. This pops up in a yellow triangle at the bottom of the screen which when I click on it, an Events Window is opened.
Error: "Desktop Display Mode has been reset because the video card returned an error. Please reset the Desktop Display Mode in the Playback Settings dialog as this may impact your playback performance."
The computer is a Sony Vaio with 1GB RAM, P4 w/HT, RAID5 of SCSI drives, and ATI Radeon 1600 Pro. We are running Windows XP Pro and Premiere Pro CS3. Supposedly the video just started being jerky the last month or two. Windows update issue? I have tried updating the video card drivers (released March 2009) and also changed the Desktop Display to all three options ... Comptable, Standard and GPU. The video still plays back and exports to tape jerky. However, if we export to an AVI on the local disk, then pull that video back into an older version of Premiere Pro we can export to tape.
Any thoughts!?!?! I have found similar qusetions in other forums, but it seems like no one has an answer.

It is very common for OS updates to render display drivers obsolete, and most people do not even know that these are installed. If you have tried the most recent driver (replaceing an older one), and not helped, it might be something else.
The aspect of the video Exporting poorly, leads me to believe that your system might be underpowered, especially in the I/O sub-system. A slow, fragmented, or full HDD can do the same. That would NOT address the warning message, though. That almost has to be a vid-card, or driver issue.
Also, if your Assets have to be decoded by PrPro, that will tax the system. If you Export as DV-AVI, then the CPU does not need to work overtime on the conversion.
Please give a complete description of the Assest, especially their CODEC's. Please give a system breakdown, paying special attention to the I/O sub-system (HDD's specs. and all configuration details).
Good luck,
Hunt

Video and display having artefacts

Hi
For the past week or two (maybe its because I am in Greece and the temperature is 36°C and the CPU temp is at 80°C most of the time).
But when I have been capturing video and doing anything that uses a lot of the CPU it seems to have artefacts or stutter on video playback, or the video freezes and the sound continues, etc.
Even on YouTube, etc.
Anything I can do to help this? Zap the VRAM/PRAM??
Thanks in advance

Have you tried the basics?

Link to QT videos and display in media holder on same CF page

I am using a learning object which I downloaded from Macromedia many years ago. The white paper which came with it was very usueful in parts but did not cover this problem. One of the interactions which I was never able to get to work as given was for a video to play in a placeholder when one of five links on the same page was selected. This really is a very neat elearning object and although Macromedia also left out two of the sets of videos the rest would be very useful for me to deploy with a client. If anyone knows the whereabouts of the missing movies let me know.
Please supply a contact email if you can help as this forum willnot allow me to attach this particular .cfm file!!!!
I am running CF8 in IIS and using Dreamweaver to edit.
Grazi hafna

Hi,
I did it once - however, I am not sure if Portal 10.1.2 has support for MIME types other than text/plain. I implemented a JSP solution and this is what I did :
1. I have a Servlet that checks the choice of output i.e, html or Excel.
2. The Servlet first renders the page in HTML, with a link that invites the user to "Export" the report to Excel. The Servlet forwards the rendering to a JSP ( which is a Portlet ).
3. If the link is click, the same Servlet is invoked - thsi time, I made the Servlet to render the output as Excel using the usual code: response.setContentType("application/vnd.ms-excel");
4. The same output is rendered in Excel.
The Servlet was not a Portlet - I had to do this workaround as Oracle Portal 9.0.4 wouldn't support the content-type application/vnd.ms-excel
Thus, the HTML rendering was done via a JSP, which is a Portlet. THe PDF / Excel redering was done by a Servlet, which is not a Portlet.
I would be interested to know if 10.1.2 ( & the later verions ) support the Excel / PDF MIME Types.
Regards,
Sandeep

Garbled video and display

Sometimes after I use my computer it begins to get this garbled video on screen:
The above picture is just an example. It gets worse though... certain things that require alpha blending (like when the brightness/volume bezels fade out) or even simple things (like scrolling certain windows) makes the video all garbled. Scroll bars will flicker when scrolling. Only happens sometimes and in certain windows.
I have a feeling it's the graphics card, but could it be something simpler to fix, like some corrupt background app?
Anybody seen anything like this?

Anybody?

Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?

Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?

If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

How to load and display the external flv video files in dynamicly and the how to control the flv fil

How to load and display the external flv video files in dynamicly using AS 3.0
and How to control the flv file add the play paus button and add seekbar.
I have using to load the flv file following code
var flvPlaceHolder1:MovieClip = new MovieClip();
var vid1:Video = new Video(734, 408);
flvPlaceHolder1.addChild(vid1);
addChild(flvPlaceHolder1);
flvPlaceHolder1.x = 1059;
flvPlaceHolder1.y = 152;
var nc1:NetConnection = new NetConnection();
nc1.connect(null);
var ns1:NetStream = new NetStream(nc1);
vid1.attachNetStream(ns1);
var listener1:Object = new Object();
listener1.onMetaData = function(evt:Object):void {};
ns1.client = listener1;
ns1.play("GV-1600 TURNING.flv");
ns1.addEventListener(NetStatusEvent.NET_STATUS, statusChanged1);
function statusChanged1(ns1:NetStatusEvent):void
         trace(ns1.info.code);
        if (ns1.info.code == 'NetStream.Buffer.Empty')
             trace('the video has ended');
             removeChild(flvPlaceHolder1);
             //trace('removeChild');
            gotoAndPlay(1786);
then how to add the play,paus ,full screen button    and   seekbar,volumebar.

I have to Create the flash presentation for our company product
In this presentation the left side the text animation are displayed then right side the our product video is displayed.
In this presentation i need the following option :
1, The first product video and animation is finished then the next product is played
2, then the video displayed (size width and height 400x300) , I click this video to increase the size(ex:1000x700)
3, then the playing video i control it play, stop, paus button and volume bar, seek bar.
4, then this presentation is displayed on 42 inches LCD TV so this full presentation is run full screen.
I have finished first two steps 1 and 2
the following are the screen short and code:-
code :-
var count=0;
var flvPlaceHolder2:MovieClip = new MovieClip();
var vid2:Video = new Video(734, 408);
flvPlaceHolder2.addChild(vid2);
addChild(flvPlaceHolder2);
flvPlaceHolder2.x = 1059;
flvPlaceHolder2.y = 152;
var nc2:NetConnection = new NetConnection();
nc2.connect(null);
var ns2:NetStream = new NetStream(nc2);
vid2.attachNetStream(ns2);
var listener2:Object = new Object();
listener2.onMetaData = function(evt:Object):void {};
ns2.client = listener2;
ns2.play("GS-4000.flv");
this.addEventListener(Event.ENTER_FRAME, BtnFadeIn2);
function BtnFadeIn2(event:Event):void
    if (this.currentFrame == 387)
        /*flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        trace('Screen size is changed');*/
        if(count==0)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        count++;
ns2.addEventListener(NetStatusEvent.NET_STATUS, statusChanged2);
function statusChanged2(ns2:NetStatusEvent):void
    trace(ns2.info.code);
    if (ns2.info.code == 'NetStream.Buffer.Empty')
            trace('the video has ended');
             removeChild(flvPlaceHolder2);
             //trace('removeChild');
            gotoAndPlay(433);
flvPlaceHolder2.buttonMode=true;
flvPlaceHolder2.addEventListener(MouseEvent.CLICK,home2);
function home2(e:MouseEvent):void
    if(vid2.width==734 && vid2.height==408)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
    else
        flvPlaceHolder2.x = 1059;
        flvPlaceHolder2.y = 152;
        vid2.width=734;
        vid2.height=408;

Photo or Video clip is not being saved and display...

hello! i have nokia n95 8gb model n95-2type:rm.320 when we take photo or video clip it does not save and display in gallry
Moderator's Note: A more appropriate subject was provided as the post was moved to the correct board.

ghorzang, who made you microSD card?

Which MacBook Pros are safe to buy used and not recalled for video graphics/display failure (due to overheating)?

I've had some bad luck with MacBook Pros lately. I bought a 2010 model but it was effectively a Total Loss because of a vehicle accident. From searching with Google, people have reported logic board failures. Who knows if mine would've failed, too.
Then I bought an older 2009 MacBook Pro and that eventually failed due to the graphics chip failure. There was a recall on it but the problem occured JUST after the recall period expired. I don't have a microwave solder lying around or a proper setup to fix the problem myself.
Now, I im in the market for a used MacBook Pro, as a gift (I can't afford a new one right now) (with the luck I have, I'm basically done with them but the person wants one).
I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures. I don't get it. I understand paying for the name, but the name also has to have reliability and you don't hear about video graphics failures from some of the more well known PC manufacturers..just saying.
I'd strongly prefer to not purchase any retina models, if at all possible. I want a mechanical SATA HDD and an optical drive. I oppose proprietary components -- as I understand it, the retina models make it nearly impossible to upgrade.
Which used MacBook Pros are safe for purchase? In other words, which ones do not have recalls or are susceptible to video graphics/display failures? I don't want to put the money down for one, only to hear it kicked the bucket and it needs service and is out of warranty.
Thank you for your time.

WindowsGreaterThanUnix wrote:
I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures.
I have an early 2011 MBP and have haad zero problems since it was new.

Acquire and Displaying Video from D-Link DCS-930L

Hello! I want to know about acquiring video from the camera as I have mentioned in the topic, but I don,t have much experience about IMAQ related apps.The idea behind the whole concept is to display a video and then through some kind of shared variable it is displayed on other PC connected via ethernet cable.

-First you need to know the need and difference between the software available in Labview like Vision development Module and Vision Acquisition particularly.
http://digital.ni.com/public.nsf/allkb/45A5682F377996BB862572B50072787F
-Then know the difference between IMAQ and IMAQ dx devices.
-Check in Measurement & Automation Explorer for your device and do quick test setup of Grab and snap then go ahead for programming in Labview.
-Now start using simple Grab and Acquire examples provided in the Labview Examples.
-If you still found difficulty then post your query.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

IMac Late 2013 - video card and display totally glitches

HI.
Today, something strange is happened.
Looks like the video or display in my iMac Late 2013 is totally broken. I don't know what to do now.
Teh screen is always blinking, glitch and unresponsive. Impossible to use the mouse. I can see partially only 10% of the screen with a distortion from the top of the screen..... It's annoying. imac is almost new, I've bought it and started use it from the January 2014.
The problem is - that in my country (Belarus) there are no any official apple service...
as I understood - need to replace gpu, but gpu is an Intel Iris Pro. And I guess replacement will touch all the board.
such a problem... I hope there is a way to fix somehow?
A Little bit details:
iMac was not overheated. there was not any damages or something else. iMac is standing on the table and used maybe for a 5-8 hours in week. Without any hard load (graphic load). So this is double strange for me. Looks like factory defect or something like this.
Im very upset.

Thanks for the reply!
I've tried to unplug everything (before was plugged only a4tech mouse and HP printer), and reboot the system. Nothing helps . i've performed reboot about 10 times. Also I've tried to reset SMC (unplug power cord for 15 sec, then plug 5 sec after, cmd opt p r) so sad. I can't use apple service in my country because of lack of service at all, only unofficial... Anyway thanks for replies... I will try to find the way to transport iMac to the nearest country with an apple service.... So sad, it was never happened with me, first critical issue with an apple device.

HT4437 can i display anything which is on my ipod touch screen onto the hdtv? or is it just videos and music?

i am looking to buy an ipod touch 4g, but i'm not sure to whether to, because the screen might be too small to read emails and the web-- can I just stream everything thats on the ipod touch screen to the airplay enabled tv, or is it just videos and music? thanks

Welcome to the Apple Community.
Only the iPad 2 and the iPhone 4s currently have AirPlay mirroring.

Does DVI to Video adapter send both s-video and composite simoutanesly?

Hi,
I´m wondering if you connect the DVI to Video adapter on the new MacMini (DVI to s-video+composite), does the Mini send BOTH s-video and composite at the same time?
If connected to TV and projector, I want to see both simotanesly, not neede to change something in the setup...
The both having same resolution I guess is a must!
Regards,
Pat

Yes, many think, but i´ve havnt heard anyone whoose sure?! Can´t be such a odd thing, connect a Mini to two displays at same same time...

Exit out of video and return to stage frame 1

Ive manged to create a flash player that incorporates a video
using a online
tutorial with the code below.
All is working well but at the end of the video I want to
exit out of the
video and return to the stage at frame 1. The reason being
is; before a user
hits play an interface image (containing info) is displayed.
When they hit
the play button the video appears and plays over the
interface image.
problem is at the end of the video the layer containing the
image is still
covered by the video. when the video finishes I need a line
of code to exit
and return the player to the original state without the
presecence of the
video layer.
any ideas? thanks in advance
Brett
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
rewindButton.onRelease = function() {
ns.seek(0);
ns.play();
playButton.onRelease = function() {
ns.play("modular.flv");
pauseButton.onRelease = function() {
ns.pause();
var videoInterval = setInterval(videoStatus,100);
var amountLoaded:Number;
var duration:Number;
ns["onMetaData"] = function (obj) {
duration = obj.duration;
function videoStatus() {
amountLoaded = ns.bytesLoaded / ns.bytesTotal;
loader.loadbar._width = amountLoaded * 200;
loader.scrub._x = ns.time / duration * 200;
var scrubInterval;
loader.scrub.onPress = function(){
clearInterval(videoInterval);
scrubInterval = setInterval(scrubit, 10);
this.startDrag(false,1,this._y,198,this._y);
loader.scrub.onRelease = loader.scrub.onReleaseOutside =
function () {
clearInterval(scrubInterval);
videoInterval = setInterval(videoStatus,100);
this.stopDrag();
function scrubit() {
ns.seek(Math.floor((loader.scrub._x/200)*duration));

Inside the videoStatus() function Check the Current Time and
Total time for video completion. Some time the Video doesn't have
exact Time when comparing to the Total duration so use Math.floor
to compare. if you still facing problem also check the Buffer
status and Video status too.

DVI to s-video TV display

what I want to do: I want to be able to use my tv as a second display to watch movies on etc.
What I have: Macbook pro 15in with a DVI Out, DVI to s-video/ composite adapter.
RF modulator for the tv as it is an old tv with only coaxel in, the RF modulator has an s-video and composite in.
Ive tried hooking up the dvi to s_video adapter to the dvi port, the s-video cable to that converter then to the rf modualtor, the rf modulator is hooked up to the tv and is working properly. I tune the tv to channel 4 like i do for my ps2... no dice. when I hook my macbook pro up to my dvi monitor it auto detects is and displays. it does not do this however with my tv. I have tried testing displays and changing the resolution down to 800x600 AND lower, still no go. What do i need to do? does it involve the F7 button?? bc ive pushed it... infact i have no idea what that does, i thought it was a display button. guess not.

turns out the dvi to s-video converter was kinda sorta broke, I had to jam the cable down into the s-video and rca plastic piece, I guess it wasnt making a perfect condition. Oh well works now.

Video and display

Similar Messages

Maybe you are looking for