Video and sound stutters in imovie project, made up entirely of stills with voice-over and music. I'm using iMovie 9.0.4 on a PowerBook 2GHz running 10.6.8 with 274 GB of space free. Size of project is 588 Gb.

This particular project is made up entirely of still photos with Ken Burns moves and dissolves between each photo. As I got further into the project, the voice over audio started stuttering, and now it hardly plays at all with a motorboat sound when it does play. I've also started added music with the dsame audio problem. I'm running on a Mac PowerBook 2GHz using System 10.6.8. I have IMovie version 9.0.4. The project file size is 588 Mb. I have 274 Gb of hard disc space left. I have shut off all other running programs and even disconnected from the internet, but nopthing seems to help. I acts like it's a memory problem of some sort, but all other applications run fine.

This particular project is made up entirely of still photos with Ken Burns moves and dissolves between each photo. As I got further into the project, the voice over audio started stuttering, and now it hardly plays at all with a motorboat sound when it does play. I've also started added music with the dsame audio problem. I'm running on a Mac PowerBook 2GHz using System 10.6.8. I have IMovie version 9.0.4. The project file size is 588 Mb. I have 274 Gb of hard disc space left. I have shut off all other running programs and even disconnected from the internet, but nopthing seems to help. I acts like it's a memory problem of some sort, but all other applications run fine.

Similar Messages

  • Screen locked with voice over and zero value

    My ipad screen is locked with voice over and every time I put in my pass code it just repeats and says zero value.  How do I get into my ipad without having to loose all my data.  Have icloud backup but not sure if that is working properly.Frustrated!

    Try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut (or Triple-Click Home depending upon the iOS version).
    If that doesn't turn it off then you can either turn it off directly on the iPad to go into Settings > General > Accessibility and turn VoiceOver 'off'. You need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling e.g. to type a digit of your passcode tap the digit so that it gets a box around it, and then double-tap the digit to type it.
    Or you can do it by connecting to your computer's iTunes (after typing in your passcode via the tap/double-tap process) : select the iPad  in iTunes, select its Summary tab, scroll to the bottom of that and click the 'configure accessibility' button :
    And on the popup select 'none' for the 'seeing' option :
    Clicking 'ok' should turn it 'off' on your iPad

  • Controlling flash presentation with voice over and animation

    Hi everyone,
    I have a project coming up where I will have voice over to
    explain some animation that will appear on stage. It is basically a
    explanation of what a company does, services they offer...etc.
    Can anyone point me in the right direction on where to start
    something like this? So that my final project has a prev, next,
    stop, play, pause buttons and all of these affect the animations
    and voice overs. I suggested to make this on video and bring it
    into flash using a video player, but they want it to be into a
    single SWF to put on their website.
    Any help would be great!
    Thank you,
    Rafa.

    kglad,
    That is what I ended up doing after posting. I made a little
    demo for my client showing him how well it was running as an FLV
    and mentioned the possibility of losing sync if we went the other
    way.
    They were not to impress with the default player controls
    that come with flash. Do you know of any good tutorials on building
    custom controls (scrub bar, play/pause, prev, next...etc)?
    thank you,
    Rafa.

  • Can I create Ebooks with voice over and page transition with Creative Cloud? Which product?

    I have created little kids e-booklets with voice over in Powerpoint that I'd like to sell online. What I am missing is the slide transition effect on mobile and pads.
    Powerpoint only allows this function in a presentation/show format, but this doesn't work when I download the booklets on my phone. Does Adobe Creative Cloud offer this feature for my ebooks?
    Best regards,
    Ingrid Heyerdahl

    Hi Tommy,
    Yes, you can create a site in Muse and publish it to business catalyst. It will be in trial mode and your client will be able to view the site over the web.
    Cheers,
    Aishvarya Raj Rastogi

  • Working with voice over and a Blackmagic Multibridge Eclipse

    I cant make the voice over work with my Blackmagic. I've tried with my M-Audio but I get the same result... No audio in voice over. The only way I can record is if I use Soundtrack.
    Can anyone help me?
    Thanks

    so many options here but to start with basics:
    using Firewire:
    mic > XLR cable > XLR mic input of mixer > Firewire out of mixer > Firewire Input of Mac
    using Decklink:
    mic > XLR cable > XLR mic input of mixer > balanced output of mixer > balanced line in of Decklink
    the mixer must have a mic input, which has an internal preamp, a line level input is no use; you need some thing like this ?
    link: [M-Audio front|http://www.m-audio.com/images/global/mediahqpics/FWSolo-frontRGB.jpg]
    link: [M-Audio back|http://www.m-audio.com/images/global/mediahqpics/fwsolo-backrgb.jpg]

  • How to unlock ipad with voice over?I even entered my correct password byt the voice over kept on saying it's wrong? 0409 is my password how come its wrong.. and the voice over kept on saying zero has no value?

    how to unlock ipad with voice over and password?  i already entered my correct password the voice over kept on saying its wrong..my password is 0409.. and the voive over says"zero" has no value?

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • I activated voice over and screen display is not shown and when touched, says time and "screen locked"

    activated voice over and screen display is not shown and when touched, says time and "screen locked"

    Hi muhsinmuhmmed,
    If you are having issues with Voice Over and a locked screen, you may find the following discussion helpful:
    Apple Support Communities: My iPad is locked and I can't type since VoiceOver is active.
    https://discussions.apple.com/thread/3933512
    Regards,
    - Brenden

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • I made a photo collage and when I sent it in a PDF it only duplicates one picture over and over

    I made a photo collage and when I sent it in a PDF it only duplicates one picture over and over. I have Mac OS X 10.8.4.  Pages 09, version 4.3

    They apparently did not have Location Service activated when they took the photo.  If it is turned off, the photo is not tagged with the info.

  • I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

    I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

    Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
    If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

  • HT201274 i have ipod 2nd generation and i had reset   Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am co

    i have ipod 2nd generation 32 gb and i had reset >  Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!

    For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Can I turn an iPhone 5 on with voice activation and Siri?

    I'm a quad with limited function and want to know if I can turn an iPhone 5 on with voice activation and Siri? I'm hoping to wear it on my wrist.

    No. If the phone is off there is no way to do anything.

  • 6th generation with voice over turned off, still plays random song names and lists 45 min into a run

    6th generation with voice over turned off still plays random song names and playlist 45 min into a run. How can I fix this.

    Sweat is getting into your buttons and causing spoken menus to come on. Run with your ipod placed somewhere that gets less exposed to your sweat.
    i

  • My mother got an iPad air after she thought her old iPad was locked up with voice over anyway it says to hook to itunes i told it to fetch from the iCloud and it wont hook up to iTunes can someone help?

    my mother got an iPad air after she thought her old iPad was locked up with voice over anyway it says to hook to itunes i told it to fetch from the iCloud and it wont hook up to iTunes can someone help?

    Punctuation would make your post a little easier to read and understand.
    What do you mean it won't hook up to iTunes? you mean iTunes does not recognize the device? If that's what you mean, one of these might be helpful.
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

  • Virtualization software with voice over

    Hello
    I need to use Windows and Linux in my macBook.
    I use VMware in Windows and VirtualBox in Linux.
    I know we can use Parallelx, VMware fusion and virtualbox.
    does anybody know which virtualization software for Leopard is accessible with Voice over?
    thanks

    To my knowledge, there aren't any emulators that work directly with voiceover. It's certainly possible for such a system to work, but it'd be a bit of a task to implement. At the moment though, vm fusion works well if you're interested in running dos/windows/linux, with the caveat that once the target os is loaded, you need to load a screen reader specifically for that os. I.E. windows xp requires jaws or equivalent screen reader. I've been trying to port dosemu to osx, but the tools to do just aren't present on osx, I.E. proper versions of gcc/header libraries and so on), so as of now, dosemu isn't an option, and nobody else seems to be working on it, because of all the commercial alternatives (paralels, vm fusion), and the free ones (dosbox, and so forth) Unfortunately for us, none of these options allow vo to act as a screen reader for the simulated oses, because none of them take vo into account with their design. So, the short of it is: if you want to run paralels or vm fusion, you'll need both a copy of the host os (windows xp, redhat linux, etc.) and you'll also need a screen reader for each os you're virtualizing (jaws, yasr, etc.) Hope this helps.

Maybe you are looking for

  • Trying to add Firebox B Addon, tells me I need 3.6 but am running 4, help please

    I would like to install the Firefox B Add on but when I do to 'add to firefox it tells me the following:- this Persona requires Firefox 3.6. You are currently using Firefox 3.0.13. But I downloaded and installed Firefox 4.0.1 which is confirmed when

  • Not a clear video..Why??

    Why does my video that I am creating doesn't  have the clear picture as the original video shown in the organizer? Please help I have been working on this video a long time and when I view it the picture is not good at all. I even tried making a DVD

  • Creating additional input areas as required

    Good Day; I have been asked to design a form using Livecycle that will replace an existing MS Word form. The form will be used to grant access to a total of 42 information systems. At first glance this did not seem to be a problem until I stated to d

  • Plugging in 2nd Display = Crash

    Everytime I plug in my second display to my Powerbook, the box asking me if I'm sure I want to shut down appears for about 3 seconds, and then my system dies. It doesn't go through the shut down process, where the screen goes grey and that thing spin

  • House move, disabled parent and no phone for three...

    Hi... Can anyone help me with this as I can't believe I'm the first to have experienced the problem. I move house on 1st May. On 21st April I contacted BT in respect of my house move. The really helpful team at home movers could not find a line at my