Video Animation problem

Hello,
I have come across a problem where if I have applied an effect to a video clip such as Gaussain and make an adjust to the timing of the effect under Video Animation option, it wont save that particular adjustment and wont render it.
Any help would be appreciated.
Regards
David

It's the slider on picture below... It will work for some of the effects, however sometimes it doesn't - it wont render, meaning the effect will render, but it wont recognise the slider setting eg. the effect will be fully on. The thing is it's not doing it all the time, only sometimes. It might be the specific effect, or perhaps having multiple effectss etc. Not sure, but I have played around with it a lot and can not figure out what is going on.
David

Similar Messages

  • Spherical Video / Animation - Need help with a unique problem

    Hi, could anyone help me which direction should I go with this issue:
    I have a video / animation which is 2 unit long, 1 unit high. I would like to wrap it around a virtual sphere to create a  video in which the viewer is able to decide which way to look. The same idea as behind Quick Time Spherical Panorama Photos - but this time it is a moving image. Any Quick Time Panorama Photos have the same 2:1 ration  when extended flat, you wrap it around with a panorama software, and then you can "enter" it with quick time.
    One or two software already exists which do the job with moving images (360 Spherical Video Viewer 4.02) but either they cannot deal with large files or belong to a company who would not give out their software without buying their whole system with cameras.
    I need to solve this, but in such a way that:
    1) the extended flat movie animation is large in terms of pixel dimension (around 6000*3000 pixel or 4000*2000) but short in time (4-8minutes) It is necessary to have such a large file because we always see a small part of the whole, and the visible part should be close to HD
    2) should be on a loop
    3) the mouse pointer is invisible even when we navigate inside the animation
    4) full screen
    Question: which program(s) will be able to solve (part of) this? Flash? Or a 3d program? Or the combination? Any further advice what to use in the given program? Any idea will be appreciated! Thank you!!

    I think you're probably in the wrong forum. The only Apple product I can think of that might be able to help you with this is Quartz Composer. You can wrap video onto a user-controlled sphere pretty easily (and much more besides). You may face performance issues with such a large video, however, and you'll need to experiment with codecs to balance data rate with decoding speed.
    Quartz Composer is free and is part of the Developer Tools, freely downloadable from Apple and possibly on your system installation discs in the Options folder.

  • Photoshop CC 2014 3D positioning in video animation timeline

    I'm a mac user and experimenting with the 3D and video timeline features. All I am trying to do is make a small custom shaped logo spin in place although it starts to spin around an axis that is off camera. My instructor at school did the exact same process that I've been doing on her computer, and it worked flawlessly which leads me to believe there is a snap, pin, or setting that my computer has turned on/off. I have found the 'Edit Pins' option in the View tab but I have not been able to select it as it is grayed out. Is that where the answer to my problem is? If not then where? The object that i am trying to rotate in this situation will move from the origin point whenever i try to apply a transformation of any kind, such as rotating, scaling, and moving.
    There is a similar problem that i have found on this forum, Photoshop CC 2014: 3D Scene Position Missing - Video Animation Timeline is the title of it although it has not been answered. This question was posted about the same time of my problems started as well. After a good amount of hours I haven't found anything close to an answer.

    I don't do 3D animations, but Seb Zaremba said it worked in the former Photoshop CC. You can have both version installed on your computer. Go to the Creative Cloud app and Apps>Filter & version>previous versions. There you will find the installer for CC (2013). Give it a try.
    Also, you might consider reporting a bug over at feedback.photoshop.com
    Benjamin

  • Photoshop CC 2014: 3D Scene Position Missing - Video Animation Timeline

    The 3D Scene Position line in the video animation timeline - missing in 2014.2.1 (CC 2014 up-to-date) ... I have tried all the posted work arounds; using 3D Meshes but the movement from center problem is still present... the answer provided in other posts about this being moved to the Scene group is entirely unhelpful. The 3D Camera post saying it was just renamed is not correct this does not rotate the object. What is the answer or the problem, is there a solution within Photoshop CC?

    I don't do 3D animations, but Seb Zaremba said it worked in the former Photoshop CC. You can have both version installed on your computer. Go to the Creative Cloud app and Apps>Filter & version>previous versions. There you will find the installer for CC (2013). Give it a try.
    Also, you might consider reporting a bug over at feedback.photoshop.com
    Benjamin

  • MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

    I find the following information that I collected very interesting at the very least...
    Here goes...
    The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
    Here is how I tested.
    Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
    Logitech iFeel Optical Mouse, USB= failed.
    Microsoft Cordless Ball Mouse, PS/2= failed.
    Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
    When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
    Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
    Anyways I figure out it was the mouse, and not the memory.
    Obviously MSI needs to make a patch for this mouse problem.
    I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
    MSI, get to work on a new BIOS to fix this mess!!!  :]
    BioHaz

    Quote
    Originally posted by Raven_
    hi
    its possible to use an ps/2 mouse AND a usb mouse at the same time.
    i used the ps/2 mouse in windows and the usb mouse when playing games.
    you can get some trouble if you do it the way i did it.
    i was in windows surfing and the pointer just jumped all over the screen.
    when i looked on the other side under a table a friends little kid played with the usn mouse.  )
    bye
    LOL, that isn't what I'm talking about.
    There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
    BioHaz

  • 'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

    I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8.  [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems: 
    First, after importing the file (.avi), I get a message about ‘dropped frames.’ 
    Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ]   I can use the shift-arrow key and see that the video is there.
    Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer.  There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux). 
    Questions:
    1.  Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

    "I think you're telling me you're using a backwards compatible Digital8  camcorder to capture your video as DV-AVIs. Is that right?" YES
    "Are you using  Premiere Elements to do this capturing?" YES, AS ABOVE PE8
    "Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
    WMP v12 is dumb. Under properties, media, it says 'video.'  However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
    So, back to the Questions:
    1.  Why doesn’t the source  monitor play the video? Is this a problem with PE8 (latest update as of 3  March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

  • MacBook Pro 15" video card problems (i think)

    Can anyone tell me if this is indeed a video card problem?
    MBP 15" info (Dec. 2011)
    Processor 2.4 GHz Intel Core i7
    Memory 4GB 1333 MHz DDR3
    Graphics Intel HD Graphics 3000 384 MB
    OS X Lion 10.7.5
    This is what happened:
    I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
    After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
    The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
    I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
    Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
    Can somebody tell me if this is really about the video card? Thank you

    Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
    Ask them.

  • Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

    Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
    1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
    2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
    3. upgraded from 1.9 to 2.0 BIOS. still the same problem
    4. reverted from 2.0 to 1.7 BIOS. the problem ended.
    BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
    so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

    Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card.  That was the last step (before chucking this mobo completely) in my attempts to fix the same problem.  It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work.  Would boot sometimes and at others gave a blue screen video error.
    Flashing to bios 1.7 was the only thing that fixed it.  Tried different memory, updating software, various combinations of drives, etc.  For the record I tried bios 1.8, 1.9, 2.0, and 2.1.  Not sure what about those updates causes problems but there definitely is something wrong.
    Thanks.

  • The Video Out Problem...Fixed?

    I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
    It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
    I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

    I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
    That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
    What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
    ted.h.

  • Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive but many are not showing up in Aperture.

    Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • Video import problem from iphone5 to PC giving error

    Hi evereyone,
                      I have iphone 5. I try to import my videos but am not able to import all, its giving error. I tried also using windows live photo still same prob. the imported videos have problem in playing. I tried with vlc, quick time, the frames are broken and audio video lag. Please help me how i can import all and rum smoothly.

    Ilan_B wrote:
    Every time I plug my iphone 5 into the laptop (using windows 7) the easiest way is to right click on the portable device (iphone icon) and import to my pictures, BUT every time I do this it wants to import ALL photos and videos.
    And when you do this, it should ask if you want to import the pictures that have already been imported. Select No.
    Then, after you import, the photos should be deleted from the Camera Roll.
    After the photos are imported and deleted from the Camera Roll, you can import using iTunes, only the photos you want on the iPhone.

  • Hello to all: My iMac has developed a video display problem. It displays everything in cartoon like colors - purple, green, blue. Can this be repaired? Is there a way to output to a different monitor? Thanks in advance!  isplays

    Hello -
    My iMac has developed a video display problem. Everything now appears in a strange, cartoonish way. Purples, greens, blues. Can this be fixed, and if so, any idea how much it might cost? Also, could I output to a seperate monitor? I plan to replace the unit , but cannot right now. Thanks!

    Go to System Preferences > Universal Access > Seeing.
    In the Display area, reset it to "Black on white" by clicking that checkbox.
    You can also reset it by pressing Command-Option-Control-8

  • Old IMac 17'' video sync problem at boot

    Hi,
    A friend has brought his IMac 17'', which has a video sync problem. At boot, all screen lines are out of sync, but I can more or less recognize the apple logo, which disappears later. Something happens at least, there is a boot processing going on I think.
    I tried to reset the parameter ram, it does not help.
    I have heard of a power supply problem that can cause that problem. Is that right? The computer serial is: W8446APAPP7.
    Can anyone help?
    Thanks!
    Philippe

    Here's a simple test case I've made, it's just a bunch of lines drawn in an orthographic OpenGL view. When you scroll horizontially with scrollbars or by space+dragging, the effect is very noticeble.
    The .app and source are available here:
    http://www.johnpsimons.com/mac/TestApp.tgz
    http://www.johnpsimons.com/mac/TestSource.tgz
    I believe this is the same problem as with the Apple homepage Flash thing. It's not just a problem with Flash.

  • Video TC problems in 9.1

    Dears all,
    i get a problem only in 9.1.
    It's simple :
    I have a video with tc burned in.
    I perfect match frame rate etc.
    But : the film is not matching the logic session.
    Example :
    Measure 10 -> tc 02:00:00:20 ( tc on video and Logic perfect )
    Moving forward 3/4 measures
    Back on the measure 10 = the previous tc on video is different in terms of 3/4 fps : the tc in Logic is
    OK.
    Opening the same in Logic 9.02 = all is ok.
    Anyone ?
    Thanks
    -A

    Hi thanks for your answer.....
    do you understand my question ?
    I mean, after checking on my 3 systems and getting confirmation fro my colleague, that Logic 9.1
    have a video related problems.
    On the paper the video is not still smoothly following Logic...... no problems in version 9.02.
    I mean that if i put the spl on a place in the song i get a fps, if i move and back the place is not the same, kind of not immediate match.
    -A

Maybe you are looking for