Video appears stretched.

I've burned several copies using both the 4X3 and 16x9 format and all the videos look fine when played on my computer, but once I put them into my portable dvd player (which I will be hooking up to an LCD projector, at my daughter's wedding reception) or play on our widescreen tv., the bride and groom each look stretched out and as though they've gained 20 pounds. I edited the video using both iMovie HD and iMovie 09, which I then sent into FCE and exported back into IM/HD. Using im09 was the only way I could figure out how to do some closeups of each of them.
I even tried exporting out to tape and then re-importing. But still no luck. They're STRETCHED.
Could the problem be my player or our widescreen t.v?
Thanks for you help, I don't have much time before their big day.
Midge

amosuc wrote:
Could the problem be my player or our widescreen t.v?
Yes.
You didn't post enough specifics but I know that widescreen TV's have several different settings for aspect ratio because some channels still broadcast in 4:3 and people don't want to see the left/right black bars... in that case, it stretches horizontally to fit.
Also, DVD players have similar settings for 4:3 with and without black bars as well as a 16:9 setting.
Not knowing your situation, try to find those settings on your TV & DVD player and figure out the combination that works.

Similar Messages

  • Input video appears stretched when imported to Premiere Pro CS6

    I'm on a beginner level on Premiere Pro so please be gentle if this question is very basic. I'm trying to make a video that preserves the input video resolution exactly. My input video was an MP4 movie with resolution 1440 x 1080. It's an iPad screen recording using X-Mirage software. When I opened it normally in quicktime, it didn't seem stretched. However, when I imported the clip into Premiere, the clip appeared stretched. I checked the Properties of the clip and it turned out to have Pixel Aspect Ratio of 1.3333, which meant the pixels were stretched. My output sequence was also stretched out because of this, even though the output indicated that the resolution is the same: 1440 x 1080. I tried to comply with "Clip Mismatch Warning" and the result was still a stretched version. Please help!

    Hi,
    In premiere pro, you will see sequence on the top. Click on sequence and from the drop down select sequence settings. Under sequence settings there would be a tab of pixel aspect ratio. Try and change it to d1/dv ntsc widescreen 16:9 or hd anamorphic.
    Check if it makes any difference.
    Thank You
    Arjun

  • Video appears stretched outside of program and pixilated images

    I am using Final Cut Express for the first time and am trying to make a slideshow. Everything displays nicely in the program, however when I export it to quicktime and play it on the computer in quicktime, everything is stretched including the generated text, still images, and the few video clips I used. When I burn it to a disk and play it on the tv, it is also stretched horizontly. I was able to solve this problem by opening up the exported version in iMovie, and saving it again and then burning it to DVD, but I know there must be some setting that I am missing in Final Cut. Please help.
    Also, the pictures display quite pixilated on the tv screen. I am using full sized jpeg files. Any setting changes I need to make on those to make them more clear?
    Thank you.

    What I am most concerned about is the still image quality. The still images are taken with a Canon 20D. I initially exported them from Lightroom as full sized jpegs. But I have now tried exporting them as 720x480 and 720x540. I export them into a folder, then tell FCE to import them and then drag and drop into the timeline. I have not adjusted any of the program settings.
    The video is taken with the Minolta (a stills camera that will shoot video clips), I don't use it much, and am not as concerned about the quality there. Sometime down the road I would like to invest in an actual video camera. At this point I am making slideshows with a few video clips tossed in. After importing the video, it was smaller than full screen so I manually enlarged it, which is why it is now the larger 720x480, but I bet it originaly came in at 640x480 at 30fps.
    I did have the slideshow completed, rendered it and played it on the computer in quicktime and burned it to dvd. In FCE the aspect ratio displayed normal, in quicktime and on DVD the images were stretched horizontly. In all programs, the images appear pixelated and seem to be of very poor quality even though the original images are all very sharp.
    Prior to this I used iMovie and have not had any problems. FCE has for some reason proved to be more complicated than I was expecting.

  • 2 Out Of 9 Short FCE Videos Mysteriously Stretched In iDVD.

    I posted this in the iDVD forum yesterday but have received no response and it now appears it could equally be an FCE problem.
    Yesterday I made 9 short slideshow videos in Final Cut Express, exported them as QuickTime Movies (NOT self-contained) and dragged them into a 4:3 PAL iDVD project. (The pictures were hi-res JPEG scans of 35mm slides so have an aspect ratio of 3:2 and appear letterboxed in the 4:3 sequences in FCE).
    On playing the project in iDVD, 2 of the 9 videos were stretched and had the statement "Widescreen Preview" in green.
    Yet all the videos were created identically.
    Thinking it was maybe an FCE problem I checked all the project/sequence data in FCE and it was all OK. They also played back normally in both FCE and QT Player.
    Can anyone suggest how this has happened?
    This morning I trashed both FCE’s and iDVD’s preferences to no avail.
    I have also re-exported the videos as self-contained QT Movies but still no luck.
    One other, more sinister “problem”, is that last night I let the cursor hover over the iDVD playback button and the iDVD monitor suddenly started giving a fantastic display of brightly coloured geometrical shapes ...... mostly triangles, I think.
    Then when I switched back to FCE there was a strange interface break-up just under and around the cursor looking like lots of small black squares or mosaics. I switched both apps off immediately and went to bed!
    A failing video card?
    So far this morning, after trashing preferences, repairing permissions and disconnecting the power cable for several minutes, both programs appear to be OK, but I am expecting the worst!

    Hi Ian, try looking over these two threads:
    The short and seemingly useful one:
    http://discussions.apple.com/thread.jspa?messageID=8995428
    The long and somewhat unhelpful one:
    http://discussions.apple.com/thread.jspa?threadID=1475310&start=0&tstart=0
    The key in the first one seems to be re-saving the movie as a self-contained movie using QT Pro. I wonder if the same thing would work if you exported as a self-contained QT movie from FCE?
    The second one toys around with the AIFF audio being the problem, and suggests a workaround using a program called Inverse-Anamorphicizer. I'm not sure if I believe the conclusion about the audio these people came up with...
    You might try the QT Pro approach first and see if that fixes it, especially because the second thread is quite long.
    Also, take a look over this MacFixIt link:
    http://www.macfixit.com/article.php?story=20080612095355771
    Apparently you are not the only one with this problem!
    Message was edited by: skalicki`

  • Jpegs appear stretched in Timeline

    I'm bringing jpegs into FCP for a slideshow and they appear stretched out as though in HD. The sequence setting is set for 720 x 480. How would I make them appear as they normally should?
    Thanks.

    1440 x 1080
    Did you use one of the Photoshop film and video presets and paste your photos into that? If so, those pixel dimensions would apply to an Anamorphic HD video setting such as that used for HDV.
    In video, dpi doesn't mean a thing. Let's not get hung up on that.
    What happens when you take one of the original jpegs and drop that into your Timeline?

  • Video appearing in a different location

    Hello everyone,
    I'm somewhat new to Dreamweaver and just completed a website with embedded QuickTime videos. All the pages look identical except for one in which the video appears in a different location on the web, than it does in Dreamweaver and the browser preview. The code for each page layout is identical. Any help resolving this would be appreciated.

    Post a URL to the page please.  The answer is in your code.
    HTML Validator - http://validator.w3.org
    CSS Validator - http://jigsaw.w3.org/css-validator/
    Video Streaming Tutorials http://www.mediacollege.com/video/streaming/
    Nancy O.

  • Import file problem, the video is stretched

    I have a 720*576 .mov file, but when I import this file in iMoive, the video is stretched, it have two black bars on both sides... How can I fix it?
    Thanks very much!!

    Where did this video come from? Captured from a camera? Open the file into the QT player and report exactly what it says in the movie inspector. You might need to run it through MPEG Streamclip or the QT pro player to fix the anamorphic flag.

  • I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    Plus, EXACTLY what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Can I make iMovie theatre videos appear in my macs iCloud folder?

    Hi -
    is it possible to make my iMovie theatre videos appear in my macs iCloud folder?  Also, is there any way of doing this on iOS? I don't particularly need iMovie on my phone but would like to be able to access my movies
    thanks!
    N

    Hey there Nickholl,
    It sounds like you want to know how to share iMovie Theater videos between your devices with iCloud Drive. The article below provides a lot of great information that should answer your question and walk you through setting up the devices.
    Use iMovie Theater with iOS 8 or OS X Yosemite - Apple Support
    Also, if you haven’t already upgraded to OS X Yosemite on your MacBook Pro, this webpage will guide you through that process:
    Apple - OS X Yosemite - How to Upgrade
    Ciao,
    -Jason

  • Some video appears currupted in windows 7 and cant be played!!.

    Hello, I was watching videos on my laptop normally but suddenly most videos appeared corrupted and won't open, I cant play them any more. I've formatted my computer but sadly they are still corrupted please help me what the hell happened to those files????I've
    tried an anti-malware software but it didn't found anything...

    So when you play them after exporting in QT and do get info what are the codecs and bitrates?
    If you want to have life easier use MPEG Streamclip, open, select export to MPEG-4 and pick a preset from the iTunes button and you will be happy. And it also does batches and you may find it is also faster.
    And it is free.

  • What defines the order videos appear in iTunes U?

    I've got some videos that appear in a different order on the iPad than they show up in ITunes on my Desktop. How can you control the order with which the videos appear on the iPad?

    This has been discussed on the forum before. You might want to search using the search fnction on the right.
    I think the solution is to put them in a playlist. It may be necessary to add track number too.

  • Music videos appear in music library

    I hope someone can help. My music videos appear in my music library as well as in my music video library. How can I get them to appear in the video library only? Thanks in advance.
    Mike

    You cannot. This is so you can also play the audio for those.

  • Why do some videos appear distorted or grainy?

    I have first generation iPad. Why do some videos appear distorted or grainy?  Is there a fix for this? I am using only WiFi portion of product.

    What videos? You may be viewing some very low-resolution videos.

  • 16:9 Letterbox dvd appearing stretched wide

    I know this is a tough thing to pinpoint with different playback set-ups, but I wanted to see if there is anything I'm overlooking.
    I have a dvd sp project, SD, set up in 16:9 letterbox format. All of the menus and tracks appear fine on: build disc on all macs, and a dvd player + flatscreen in one location. But on a new dvd player setup, it looks like it's getting double letterboxed...in other words the 16:9 menu and tracks are appearing stretched wide, and we get bars top and bottom. In this same setup, we play two other 16:9 dvds (not authored by me), and they appear correct, so it doesn't seem to be a global setting in the playback set-up.
    Any ideas?
    Thank you

    Did you use Pan & Scan at all in the settings? It should just be Letterbox, not Pan & Scan/Letterbox or Pan & Scan. I would check that first, though I do not think it would cause what you are describing but those settings can cause strange results. (It sounds like you did not letterbox the movie in Final Cut, which is the right way to do it, but just checking.)
    What you are describing does sound weird. Have you tried on any other players (sounds like you tested on two standalone players so far.) I would also double check the settings on the new set-up just in case and make sure that they are set for 16:9.

  • Some music videos appear twice on my iPhone but not in my iTunes library. How can I resolve this?

    Hello everyone.
    I have an iPhone 4 with iOS 5 and I am using the latest version of iTunes 10.5
    I have downloaded three music videos by the same artist. The three videos appear in my Music library in iTunes
    On my iPhone two of the videos appear twice with the other one appearing once as it should do. I have played all of these videos and they work fine. It is just annoying that two out of the three music videos I have are listed twice on my iPhone.
    Would anyone be able to help me resolve this issue?
    Thank you.

    In the iTunes Store click Purchased in the Quick Links section on the right.

Maybe you are looking for

  • How to find the number of entries in a master data table

    Hi Experts, I am trying to find the entries in 0CUSTOMER master data. BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need. I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it i

  • How to execute a statement in application process on new authentication

    Hi all, How can i execute a statement such as set role TABLE_NAME identified by sunil; in my application process? I have tried exec('set role TABLE_NAME identified by sunil');, but wasn't successful. Does anybody knows the problem in my syntax? Thank

  • Index of the row where the cursor is clicked

    Hi all,    I need to set some values in table control for the fields where i clicked the cursor.  Actually i am using the below code but its not working...       lo_el_zdcapsc = wdevent->get_context_element( 'CONTEXT_ELEMENT'  ).     lv_sel_index = l

  • How do I get past the (-50) download error

    I can not dowload from ITunes. I receive the error message THERE WAS AN ERROR DOWNLOADING YOUR PURCHASED MUSIC. AN UNKNOWN ERROR OCCURRED (-50). Based on everything I have read, there is an internet block. I ckd wdws and it shows Itunes being cleared

  • Windows media player for 9300i

    Hi, I tried to play Live Radio at http://www.bloomberg.com/tvradio/radio/# It gave me the message that i would need windows media player. what do you recommmend I should do. Thank you for your help Andonny