Video artwork not correct

I imported several videos into Itunes. In the folder they were originally in, they each had indivdual artwork (screen captures). In Itunes, all of a sudden ten of the videos all display the same artwork (which is only the correct one for the first video). Simialr story for another three videos. When I click 'get info', in the summary tab, the correct screen capture IS displayed,but under the artwork tab there is nothing. When i copied an image into the artwork page, it didnt change what is being displyed in Itunes.
Any ideas as to how to make the videos display the image they have from the original folder?

Tried changing the album names- six songs changed to a different picture, but again its the same picture for those 6. Also, i just realised this is only happening in the grid view on itunes- if use the cover flow view, the correct pictures show up.
ETA Uhh....so in the last 60 secs i was mucking around with the size bar so i could view all the icons in grid view without scrolling-and all of a sudden the pics were correct! i don't know why but something worked...
Thanks

Similar Messages

Ipod Classic artwork not correct

i have restored my ipod classic 3x and the artwork is still not correct on several songs even though the artwork is correct in itunes? any suggestions?

Although you did a Restore, there may be a cached version of the iPod's artwork database in iTunes (on the computer). You should try removing those songs (with the artwork problem) from the iPod, use the iPod to confirm they are gone, then sync those songs back to the iPod. Hopefully, the artwork will be corrected this time.
If that is a problem, because your sync setting is to sync the entire iTunes music library, please post back.

Time on videos is not correct

anyone know how to fix?

I just noticed this same problem. The time on the recorded videos is ahead by an hour. Is this a Verizon fix or a user fix?

Poster Frames on Ripped Videos Lost, Not Synced to iPad or iPhone

iTunes 10.2.1 on latest Mac OS X 10.6.7.
I have videos which I've ripped from Blu-ray via MakeMKV and Handbrake. When I import them into iTunes and then set a poster frame, more often than not:
1. The poster frame is easily lost, especially if I do a Get Info on a movie. Sometimes the poster frame disappears without me having done anything.
2. The poster frame is not included when I sync the movie onto my iPad or iPhone.
3. Also, chapter thumbnails for chapters appear in all black on the iPad or iPhone.
This is seriously lame. Does anyone know of a solution for these problems? Is ANYONE from Apple working on this? This USED to work in the days before iOS 4.2 and iTunes 10.

I've just experienced similar problem at work and found a solution to some extent. Initially we got the video artwork looking correct in itunes by right clicking on the video window whilst it was playing and clicking 'set poster frame', however although this worked for itunes the artwork dissappeared once on the iPad. The solution I have found is to use metaX on the pc to set the .mp4 video artwork and then use itunes on my mac to sync the videos. It's worth noting that every time I tried to use the mac version of metaX to add the artwork it made the entre video into a black screen.
Basically it seems itunes fails to proerly tag the metadata of some files, luckily other programs like metaX seem to do it ok.

HD video does not play correctly in Quicktime

I have a Kodak Z1275 camera. My PC is a Compaq with Athlon 64 3800 processor. Quicktime version 7.4.1.
When I play videos taken in HD mode, the color is not correct when I play them back using Quicktime. Everything is blue.
When I play them back on the camera, they are fine.
Videos taken in non-HD mode play fine on the PC.
Can anyone tell me what is going on?
Thanks

Open the QuickTime Control Panel / Video tab and check the box to use "Safe mode".
Quit and relaunch QuickTime Player and any open browser and try the file again.

Why I can't to open youtube video that shown the server is not correctly configured?

Youtube has an error the server is not correctly configured. Could you help me to solve this problem?

With any other device such as my Samsung TV or portable computers, access to Youtube is flawless, everything working perfectly.
So i assume that any Apple iOS device with recent updates have a problem with Youtube.
A bug or else from Apple iOS.
Apple iOS is not compatible with Flash and now it seems it's not compatible with Youtube either.
Maybe Youtube is using to much flash type programs.
If you can help, please do so, because we can not show our Youtube videos with Apple iPod Touch or iPAD2 anymore.
Hey, does Google have Youtube now? If so, maybe Google is giving a hard time to Apple?
Anybody from Apple or the community can't help?
Thanks.

Artwork on my iPad does not match iTunes and is not correct for movies, TV Shows Nd some songs

Artwork on my iPad does not match iTunes and is not correct for Movies, TV Shows and some songs & Albums. Is this issue resolved? If so what was or is the fix. I have not been successful in locating that. I found posts stretching back into late 2010.

most of these items were downloaded from eihter iTunes or in the case of movies, imported into the app and then loading them to TV Series or Movies as appropriate. They were all fine until about two days ago when I did a sync. Then the artwork went haywire. I tried manualy removing and replacing the artwork in iTunes with the correct jpg's. and then re-sync. iTunes shows everything OK, but the iPad is the one with it all messed up.

ITunes is not syncing my videos or music correctly

I backed up my old iPhone 5 that had been upgraded to iOS 8. got my iPhone 6 Plus and restored it using the latest iPhone 5 backup. I cannot get ALL of my music or the videos I select to sync to my iPhone 6. This occurs when I select "Manually manage music and videos" or not. It also does not matter if I select "Sync only checked songs and videos" or not. Syncing takes a REALLY long time. None of the options I have tried has worked, i.e. turning on airplane mode, syncing over wifi, etc.

I'm having same issue and when i try to add a video or song one at a time it shows the window like I've never had my iPhone synced to the only computer its ever been synced to.this su.got it to actually work once after 9 hours and then didn't sync but about a third of my music and then added almost 40gb to the other section.this need to be fixed VERY SOON.

Video creation date not correctly read?

This might be a bug--it appears to me that Bridge is not reading the EXIF "date/time original" field for avi files--instead it is reading the MS windows dates which is a bad thing because any time you copy a file, these dates get changed. Even just moving a video file to another hard disk will destroy the MS windows "creation date". However the EXIF dates are untouched.
I'm using exiftool to read the metadata.
Bart

iPhoto uses EXIF metadata for it's creation date and videos do not have that metadata. You can use the Photos ➙ Adjust Date and Time.... menu option to change the date to whatever you need to get it to sort in the right order when sorted by Date.
OT

I noticed after switching from IE9 to Firefox that some website videos will not play. How is this corrected?

I sometimes want to look at how-to videos. Some play and some do not in Firefox. When a message does come up on the screen it says someting like 'sorry, but the video will not play...do you wish to download the plugin?'. Because I am very catious about what I download, I am not confident about downloading a plugin. Does anyone know what I need for Firefox to play all website videos?
+++++++++++++++++++++++++++++++++++++++++++++++
I am adding this to my original question:
I see that quick-time is an available plugin...Is this soething that will work?
++++++++++++++++++++++++++++++++++++++++++++++++
Thank you

You're welcome. Glad I was able to help you.

GeForce4 TI Video Card Not Recognized Anymore?

For about almost a year, the fan on the GeForce4 TI video card would occasionally make a grinding noise, although it has always been easily fixed by lightly sticking a finger on the fan to stop it for a second and it would go back to normal.
However, about a month ago this little fix stopped working. The grinding noise was unbearable. After searching the Internet for a few minutes, I found out that I wasn't the only one suffering from this problem, and some even offered tips on how to replace the fan.
I followed the steps very carefully and made sure the card was not harmed. After installing the new fan, which was very easy, I stuck it back into the Power Mac and boot it up. However the monitor didn't find a signal.
I was glad that I installed Remote Desktop on the Power Mac so I was able to connect to it and see what's going on. I opened Apple System Profiler and noticed that the computer isn't properly recognizing the graphics card anymore! Instead of the very detailed information I'm used to seeing, this is what I saw below:
pci10de,a:
Type: VGA-Compatible Controller
Bus: AGP
Slot: SLOT-1
Vendor: nVIDIA (0x10de)
Device ID: 0x252
Revision ID: 0x00a3
I have no clue what this means as it seems like the computer still recognizes A video card. Also this also gave me the impression that the Power Mac is missing the drivers, but that's impossible as I haven't touched the software on the hard drive and nVidia drivers are part of OS X.
If the card is broken then fine, I'll take my losses and buy a new one as I would hate to just throw the computer away since it still more than fulfill my needs. But I just hope the AGP slot isn't broken.
Any ideas? Thanks in advance.

Just for clarification:
You have two systems based on the same MS-7008 mainboard, correct? Both use the same BIOS Version?
In one system, the card is functioning, running in AGP 3.0 Mode x8 and in the other, same mainboard model, what are the symptoms of "video card not recognized" besides the AGP 2.0 Mode x4 limitation?
I mean, if you can see the BIOS Setup, the card is putting something out on the screen, right?

Video does not Work in iTunes Store please help! annoying problem!

The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?

I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video.

Monitor says VIDEO MODE NOT SUPPORTED after changing display settings

HELP! I am about to have a nervous breakdown with my mac mini! I hooked up the mac to my Philips LCD via DVI. No problem at all. But because the screen is only 15" I wanted to play around with the display settings a bit. So I changed the resolution from it's original 1204x768 to the one higher (not sure of numbers) and to my HORROR, I now can't get any picture at all - it says "VIDEO MODE NOT SUPPORTED". I have tried everything I can think of. I have rest the P-RAM, I have unplugged all cables, plugged the back in again, I bought the mac into work and hooked it up to my monitor and changed the resolution back to 1024x768 which is what it was on originally and that STILL didn't work. I can see the Apple logo and then it goes black and comes up with the error message. HELP! What am I doing wrong - I can't believe one click of a mouse button has rendered my display useless!!!

Welcome to Apple Discussions!
Try booting the mini without the display connected, and then, once the system is running, connect the display. This will often force the system to default to a low resolution, and then correctly detect the display when it is connected.
If that doesn't help, with the display connected, boot into safe mode (hold the shift key down when starting up) and once the system is running, change the resolution to 1024x768, and ensure the correct refresh rate is selected. Rebooting normally ought then to give you a good display.
If all else fails, boot into safe mode with the display connected, and then in the Finder's file menu, use the 'find' option to search for 'windowserver' (no quotes). You should get 2 or 3 results, including one with a string of alphanumeric characters. Move all of them to the trash and restart normally.

I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
This question was solved.
View Solution.

Hi,
Try a clean installation of the flash plugin/activeX as follows.
First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
Flash Player Uninstaller.
When the download has completed, close all browser windows, open your Download folder and run the uninstaller. After this has completed, restart the notebook.
When windows has reloaded, download and install the latest version of Adobe Flash. Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
When the installation has completed, restart the notebook.
If the above doesn't correct the issue, then try the following.
First of all, download and run the Shockwave uninstaller on the link below.
http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
After this has completed, restart the notebook.
When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
http://get.adobe.com/shockwave/
Again, after this installation, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When I sync my iphone to be able to import all the photos from a specific photo album onto my iphone.. why do the videos included not import?!

So I used to have an iPhone 5 with 7000+ photos inc videos. I finally decided to free up some memory by exporting the entire camera roll into a specific folder on my windows pc. In the album are all the photos and videos, matching the content from my camera roll (obviously). Now I have the 5S and would like the entire library of photos back into my photos app. So obviously it was as simple as plugging in my iPhone and clicking the photos tab, then 'Sync Photos from' and choosing that specific folder that I had previous exported my camera roll into. I then ticked the include videos checkbox. After the sync was completed, I then went onto my photo album and found the correct album being listed. However the number of photos on the iphone album did not match the number of photos in the actual album on my windows pc. Then I realised the reason.. the videos have not transferred? I've tried resyncing several times. iTunes identifies the album to exist the correct number of photos/videos as it should do, yet my iphone still has not imported any videos. Is there anything i'm doing wrong?! Thanks in advance for any help.

Seems that you can no longer hide them on your phone. Try doing so in iTunes: http://support.apple.com/kb/HT4919.

Video artwork not correct

Similar Messages

Maybe you are looking for