Video audio cutting into soundtrack music

Hi everyone I have a video I am making which is backed by a music track, in most parts it is fine but a few areas sound from the video cuts in...I am sure I have set the audio properties for each clip to 0% volume, I have even tried detaching the audio and deleting it to no avail.
The video is edited clips of a video I made in iMovie before so the audio cutting in is a different music soundtrack I had used.
How can I get it so just be the music track covering all the sound without the annoying video sound?
Many thanks

If you have made any custom speed changes in your project, rather than using the presets on the speed slider, you may experience audio glitches after export. See my post in this thread:
http://discussions.apple.com/thread.jspa?threadID=2576834&tstart=0
John

Similar Messages

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks, any ideas please?

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks and then sync them, any ideas please?

If you import the audiobook as an audiobook to your iTunes Library, it will be listed in the Books section of your Library. You may need to turn on Books in order to see them. If you cannot see the File/Edit... etc. menu, use CTRL B on your keyboard to make that menu bar appear. Then go to Edit/Preferences>Books and put a tick in the box.
But, if the imported audiobook shows up in the Music section of your iTunes Library, highglight the files (in iTunes) and select File/Get Info/Options/Media Kind>Audiobook. These files will now transfer to the Books section of iTunes.
Once on an iPod Classic, look under the Audiobooks menu. Again, you may need to change the settings in the Settings menus, in order to have the Audiobooks option shown on the Main Menu and/or the Music Menu.

Video/Audio cut out

Hi there,
I am trying to edit a video file that is in .mov format ( see bellow a screen shot of the original file ):
It says it has 01:11:31 duration, but when i enter it in Premier it show's up only to 01:08:10 ( see bellow ), so the video and audio cuts at this point. Any ideas why this is happening ?

Same issue in Premier. Sees only until 01:08:15
General
Complete name                            : F:\Completed\Flo\Assets\05-03-2015\1.mp4
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 178 MiB
Duration                                 : 1h 11mn
Overall bit rate mode                    : Variable
Overall bit rate                         : 347 Kbps
Tagged date                              : UTC 2015-03-06 12:23:46
Writing application                      : HandBrake 0.10.0 2014112200
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 4 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 1h 8mn
Bit rate                                 : 109 Kbps
Width                                    : 1 650 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 3:2
Frame rate mode                          : Constant
Frame rate                               : 25.000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.002
Stream size                              : 53.0 MiB (30%)
Writing library                          : x264 core 142 r2479 dd79a61
Encoding settings                        : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Color range                              : Limited
Audio #1
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 1h 11mn
Bit rate mode                            : Variable
Bit rate                                 : 139 Kbps
Channel(s)                               : 2 channels
Channel(s)_Original                      : 1 channel
Channel positions                        : Front: C
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 70.9 MiB (40%)
Title                                    : Mono / Mono
Audio #2
ID                                       : 3
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : ac-3
Duration                                 : 1h 11mn
Bit rate mode                            : Constant
Bit rate                                 : 96.0 Kbps
Channel(s)                               : 1 channel
Channel positions                        : Front: C
Sampling rate                            : 44.1 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 49.1 MiB (28%)
Title                                    : Mono / Mono

CAF Audio Files into Soundtrack

Hello,
I am just now starting to use Soundtrack Pro, but I would like to know if (or how) I can still use my old I-movie sound effects. Some of them aren't so bad, and I'm used to them.
Can I import them into Soundtrack Pro? The Imovie files are CAF files... is there a way to convert them to AIFF files?
Thanks

Awesome, thanks.
But if I'm wanting to use them on a Final Cut Pro project, will I have to convert it to an AIFF or WAV file?
Thanks again!

From Final Cut into Soundtrack

Is there a way to edit the audio from a video clip in FCP in Soundtrack while FCP is running?
- Anthony

Try right clicking on the audio and selecting 'Send to STP Audio File Project'

Is it possible to mute video audio and play music?

I am trying to put together a video and would like to at one point in the video mute the video audio and play a bit of music during the video and then after that section un mute the video audio and mute the music.
Can this be done in iMovie 09 and if so how?
Thanks

If you're Airplaying from you computer, you might be able to do this. Here's what I would try:
Go to the Airplay icon in iTunes. You should see both your Apple TV and your speakers listed as options. Select "Multiple speakers." You'll see both devices together. Turn the volume all the way down on the Apple TV. You should be getting the video on the TV, but only hear audio through the speakers.
Using the "Multiple Speakers" option will sync the output of your devices so that the sound matches the picture.
I haven't tried this myself, but I'm thinking this would work. However, this approach will only work when using Airplay from your computer – not from am iPad or iPhone – as they don’t have the "Multiple Speakers" option (as far as I know). It also won't work with content streamed directly to your ATV, obviously, because there's no way to stream from ATV to other devices.
Let me know if this works.

No audio video audio using airport express?

does anyone know why you cant listen to music video audio thru airport express. music works fine...not audio.

Chris--
I'm sure it's the same reason you can't listen to audio through Airtunes and on your computer's speakers at the same time: there's a significant delay as iTunes processes the audio, sends it over the network, and the Airport Express decodes it and sends it to your stereo. The video on your computer would be out of sync with the audio from the speakers.
best,
charlie

Final cut pro - editing music video audio falls out of sync

filmed with canon 7D- i play the music in the background for th artist to perform. upon loading up the footage into final cut, i sync the start of the video audio with the record, as they both play it falls out of sync. i did not have this problem when i edited with premiere. any ideas

Sync issues are *usually* going to be mismatched sample rates, for instance, you imported 44.1kHz audio into a 48kHz project.
This happened to me awhile back, and unfortunately, I don't remember exactly what I did to fix it. But what I *think* I did was click on the imported audio and went to the Retime menu and selected Conform Speed. If that doesn't work, right click on the audio in the event browser and select Transcode (if there's an option to do so in the dialog).
It is also possible to manually resync audio by Retiming it. Turn on snapping (N), select the clip, type Command-R and drag the audio clip's retiming handle until the end of the audio snaps with the end of the video clip (this is actually amazingly accurate.) [If your recorded audio is not the same length of the audio on the video, then set markers on the video and audio tracks and retime until the markers snap.] You should do this before any other edits.

Record video into finalcut and audio multitrack into logic in sync

Hi,
I'm an experienced logic user but new to video.
What is the best way to record video and audio multitrack!! synchronously?
Can I record video direct to my harddisc and synchronously record audio into logic or soundtrack pro? We have two separate macs available.
-Can I connect finalcut with logic via rewire or do I need additional sync hardware?
-How can I start record simultaneously for finalcut and logic?
-Do I need finalcut pro?
-Can I record video and audio directly and simultaneously into soundtrack pro or finalcut?
I currently work with a cutter who uses canopus but assign each video take to each audio take is so time consuming. There must be a better solution for video production.
Any feedback appreciated,
Thanks Eddie

I may be wrong about this, but AFAIK…
Can I record video direct to my harddisc and synchronously record audio into logic or soundtrack pro?
No.
-Can I connect finalcut with logic via rewire or do I need additional sync hardware?
FCP is not ReWire compatible.
-How can I start record simultaneously for finalcut and logic?
You can not.
-Do I need finalcut pro?
Maybe, but I can't say one way or the other. What is your goal with video?
-Can I record video and audio directly and simultaneously into soundtrack pro or finalcut?
You can record directly into FCP, either via FW or SDI (if you have supporting hardware)
I currently work with a cutter who uses canopus but assign each video take to each audio take is so time consuming. There must be a better solution for video production.
Not familiar with Canopus, so I can't comment.
Any feedback appreciated,
Some editors find the term "cutter" to be an unfair characterization of what they do. We do waaaaay more than just cut out the bad takes!

Why Does My Mp3 Audio Behind Video Clip Cut To Length Of Video Clip?

Ok. So I am trying to put together a music video using iMovie 11, and am having the hardest time getting started. I put my selected video clip up on the dashboard to get ready to cut as well as edit the footage. When i put the Mp3(Song) on the dashboard it automatically cuts to the length of the amount of video footage that is on the dashboard at that time. I have tried to lengthen the duration of the mp3 using the settings feature given on the audio clip, but it automatically jumps back to the duration of the amount of video clip. Ultimately I am trying to lengthen my duration, and have my mp3 the full length of the song to stay for the whole project, which gives me room and a real chance to work with my clips. I figure that it is something very conspicuous that I am missing. I'm sure it is just a minor issue, and would love if somebody could help assist me with this problem. Please, and thank you your time is much appreciated.

Hey Matt,
Welcome to Apple Support Communities.
It sounds like you’re trying to add an audio track to your iMovie project but you’re running into an issue adjusting the length of the track. If you haven't already, try making audio waveforms visible in the Project browser as shown in the article linked below.
iMovie '11: Set the beginning and end of a sound or music clip
Using audio waveforms:
With audio waveforms visible in the Project browser, you can modify aspects of all the sound elements in your project in the same window. This feature is especially useful if you have many changes to make to your project’s audio.
These instructions apply to modifying the startpoints and endpoints of audio you’ve added to your project, or audio you’ve detached from video. These instructions don’t apply to modifying the audio recorded with, and still attached to, your video, or to modifying background music you’ve added.
With your project open, click the Audio Waveform button below the Project browser.
Waveforms for each of the sound elements in your project appear in green, blue, or purple bands below the video clips. Blue waveforms represent the sound that was recorded with your video. Green waveforms represent sounds and music you’ve added to your project. Purple waveforms represent voiceovers or audio that was detached from a video clip. Names appear in the top-left corner of each green or purple waveform to make it easy to identify them.
Select the sound clip you want to trim by clicking its name at the top of its waveform; the clip becomes outlined in yellow.
Move your pointer over either end of the clip so that it turns into a resize pointer (if the clip has a jagged edge, it means the clip is split onto two lines), and then do one or both of the following:
To set where the sound clip starts playing, drag its left edge to the right or left.
To set where the sound clip stops playing, drag its right edge to the right or left.
Cheers.
-Jason

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

Audio cutting out at the end of my video

So I exported a AVCHD video into an uncompressed AVI and then re imported it. I brought it into the time line and edited it a bunch and also brought in another video and mixed that in. For about half of the video, I used the audio from the video itself... but in different sections, I brought in a separate wav file. I used this wav file towards the end of the video for about 1 minute of the video. After I was done, I exported the entire project into a normal avi file because what I'm going to do for now is upload these to YouTube and so I don't want the file sizes to be too huge.
So I opened up the final avi file in VLC player... and everything is great... except the last 30 seconds or so of the video doesn't have the audio. It plays the audio from the wav about halfway through... and then it stops. The video continues... but there is no sound.
I went back into the project and everything looks fine. The wav file extends to the end and the audio plays fine when I preview the video. So I exported again just to see if it was some sort of error the first time... but no... it did the same thing.
So why is the audio cutting out at the end? How do I fix it?
Thanks in advance.

Ok I figured out how to do a better quality MP4. However I had two problems. 1... the quality isn't near as good as the AVI. 2... now the audio cuts out in even more places instead of just the end. It seems that the .wav file I imported is causing the problems. In the AVI, the wav file cuts out at the end. In the MP4, the wav file cuts out in the middle AND at the end. I don't understand why this is happening. The wav file plays all the way through normaly, and it also sounds find when I preview the video... but when I encode it... it cuts out in places regardless of the format. Is there some step I'm missing in the process to make sure the audio is all in place?

Audio synched on Quicktime videos until imported into Premiere Pro CS5

I have Quicktime HD footage that has been cut into several QT videos that works perfectly (in the QT player) before it is imported into PP. Once I import the videos the audio is slightly off at the beginning of the timeline and continues to get worse throughout the project.
I have tried clearing my media cache and reimporting the videos and have not found anything that works.
Thanks in advance for your help!

Unfortunately, I do not have any suggestions there, but perhaps others will.
I use the MainConcept H.264, but have to admit that I do not do that much work to H.264.
Good luck, and I am sure that others will have just what you need,
Hunt

Sync Music audio with Video Audio PE10

Hi.
I am new to Premiere elements 10 (Changed from Corel to Adobe, so i'm not new to video editing, but I'm not used to PE10).
I am filming a lot of my daughters Circus performances, so very often I find the music number used at the performance and merge that with the video audio in the project.
But I have a problem syncing the music from the audio track on the video with the seperate music track.
So to specify: I want both Audio tracks running at the same time, so that I keep the clapping and the whisteling from the audience, but get the better quality of the music from the external file merged with the music in the video-audio-clip.
Is there a special tool or can someone help me with a special tecnique?
Regards Settemand

Along with the instructions offered above, when nudging the Audio, I would make sure that Snap is OFF, as Snap will try to align your Audio with the beginning (Head), or end (Tail), of you Video Clips. That is useful for many editing operations, but for nudging Audio will frustrate you. The Snap function is a toggle with the S key. Just do not forget to turn it back ON, when done.
Also, though the Soundtrack Audio Track seems to be the ideal location for your extra music, some users have experienced issues, when using it, or the Narration Audio Track. While it seems that those issues are Project-specific, and those Tracks often work well, to keep from being tripped up later, I recommend putting your music on a free Audio Track, such as Audio 2 - just to be safe.
Also, with either an Audio, or Video Track, you can Zoom IN/OUT horizontally with the Timeline Zoom slider, AND can also Zoom IN/OUT vertically, by going to the Track's Header (where the Track Name is located), then hovering your cursor over the little line between the Track, until it changes to an equal sign with up/down arrows, then click+drag, to enlarge the Track (and the Clip display) vertically. I find that this makes viewing the Audio Waveform Display easier, and the peaks are more obvious. When done, you can just reverse that operation to Zoom OUT on the Track vertically, so that it looks like it did, before you started.
Good luck, and this FAQ Entry might be useful, though it talks about OOS (Out Of Sync) Audio, the functions are the same for syncing additional Audio: http://forums.adobe.com/thread/436751?tstart=0
Hunt

Render video pon audio import from Soundtrack Pro

Unique issue I have here. My video is standard NTSC Animation Codec and is in my Sequence in FCS2. I import my project into Soundtrack Pro edit my audio, Export back into FCS 2 (following the manual to insure proper steps).
Once I arrive back into FCS2 my video needs to be rendered. It checked the codec and everything matches up fine. Why is it now asking me to render mt video?

Paul,
Did you edit to picture inside STP? And was it in sync there?
You may have an issue with a frequency shift. Audio doesn't have frames. It really runs in "real time." So if you shift frequencies the units per second change. It still has the same number of units, so ultimately the time changes.
How did you get the audio into STP in the first place?

Video audio cutting into soundtrack music

Similar Messages

Maybe you are looking for