Video & Audio record

Hi,
Need to record all communication through skype specially video and audio in an enterprice level.
please provide us details solution with cost.
Thanks

Hi, Sadybd, and welcome to the Community,
Please see this FAQ article which describes third-party add-on options to record Skype calls:
https://support.skype.com/en/faq/FA12395/how-can-i​-record-my-skype-calls?
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

  • I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing incase an answer is contested. We will need to stop recording and access the footage as the day progresses. Any suggestions?

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

  • How to estimate gigabites per minute of video/audio recording

    Is there a basic equation that I can use when trying to estimate the number of gigabites my original video/audio footage will consume when I download it from my miniDV Camcorder? Thanks

    Hi(Bonjour)!
    See user's manual (help menu) at page 180:
    *DV-format video*
    30 sec. 1 min. 5 min. 10 min. 30 min. 60 min.
    108 MB 216 MB 1.08 GB 2.16 GB 6.5 GB 13 GB
    *Apple Intermediate Codec*
    *HDV 720p30*
    30 sec. 1 min. 5 min. 10 min. 30 min. 60 min.
    210 MB 420 MB 2.05 GB 4.10 GB 12.30 GB 24.61 GB
    *HDV 1080i50*
    30 sec. 1 min. 5 min. 10 min. 30 min. 60 min.
    360 MB 720 MB 3.52 GB 7.03 GB 21.11 GB 42.19 GB
    *HDV 1080i60*
    30 sec. 1 min. 5 min. 10 min. 30 min. 60 min.
    420 MB 840 MB 4.10 GB 8.20 GB 24.61 GB 49.22 GB
    Michel Boissonneault

  • Video + audio recorded in Quicktime X is out of sync when used in iMovie

    I have recorded video in Quicktime X. When I try to edit it in iMovie, the audio and video are out of sync. They are in sync if I play the video in Quicktime. I am using the latest version of iMovie '11. Anyone know how I can fix this?

    You should not HAVE TO but did you try extracting out the audio? This has been a issue for a long time. I am not sure why you never see this problem in Final Cut but it rears its ugly head in iMovie all the time. What do the call it now? Oh yes... detach. Select the clip then Clip -> Detach audio and line it back up.
    -- Dan
    Keeper of TheUnofficialiMovieFAQ.com

  • Version 4+, extensions for video & audio record/save, great. Now, version 5... they are all gone! Why?

    Firefox kept putting box on screen to inform me to download new version 5. I finally did. Now, the extensions I did have are no longer there. How do I get them back? Will they work with V5?

    Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 5.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.

  • I have a Zoom Q3 HD video/audio recorder, that records me playing the drums.  How can I add the sound of the song I am playing to to this audio/video mix.  Can this be done with Garage Band or iMovie?

    Any clues???

    thomjw,
    Have a look at this article:
    http://docs.info.apple.com/article.html?path=iMovie/HD/en/im18.html
    Post back if you still have questions.
    Matt

  • I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
    What is the brand/model/settings of the camera that recorded these videos?        ony  PMW 320
    When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
    the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
    the video in the Premiere Elements Editor, how many channels does the Audio Meter display?   
      I just drag and drop video and when playing back only channel 1 will appear
    What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
    I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
    Thanks for the help if possible,Kevin416 873 8374

  • Record a 3 hour live webcast video & audio

    Can QT record a webcast? If yes, how? I don't see the controls for recording. If no, then what is "the program" to use? I have been searching several discussions and programs but nothing seems to be a for sure solution unless I am recording from a camera or DVD or only want audio. I have Final Cut Express HD that I bought February 2007 and never opened but don't see that it has recording capability. I need to record video & audio of a webcast coming over the net and I only have a couple hours left to get this working.
    ThankU for any help

    How much hard drive space do you have???
    Depending on the dimensions (xy), acquisition codec and final codec for the video your looking at some major hard drive space.
    I believe Snapz Pro X uses acquisition codec and then transcodes that video to a final codec/format. IShowU is another screen capture program. It transcodes on the fly, major CPU usage. (I have both of these programs.)
    This is something to should have been setup and tested a few days ago. All you need is a small hiccup during recoding and you'll end up with nothing but garbage at the end of the recording. If you recoded to your system hard drive and fill it up during recoding you could run into some problems with you system hard drive. I wouldn't advise recording to your system hard. Recoding to a USB external hard drive won't cut the mustard, to slow. You'll need something like a external 800 firewire hard drive.
    Three hours of recoding won't be a easy task.

  • Stereo Audio Record problem (While recording video as well)

    Hi,
    I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
    Any solution?
    Thanks.

    @uliwooly  This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4  then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp.  Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not  the typical "sony" thing to carry on.

  • Audio & Video Call Recording Solution for CUCM

    Hi,
    I am looking for a audio and video call recording solution for CUCM. The requirement is the recording system shall record all audio & video calls including incoming, outgoing, and station-to-station calls. One cirtical requirement is: The users on the CUCM system shall be able to record video calls for video equipped stations with a push of a button on their Cisco IP Desk set or their Cisco soft phone.
    Does anyone know the product or third party vendor who supports audio and video recording for CUCM?
    -Thanks
    Vaijanath

    Currently Cisco doesn't support video recording with a push of a button on their Cisco IP Desk set or their Cisco soft phone. Also, I have checked with the third party vendors and they only support the video recording using Passive Call recording (port mirroring).
    http://www.verba.com/cisco-call-recording-solutions

  • How to add audio from a video while recording.

    Hi,
    I want captivate to recognize the audio of the video when recording a video demo. I know that it is possible in captivate 6.1 but not sure how. It sounds lame but I am a beginner.

    Hi there,
    Welcome to Adobe Forums.
    You can do this by selecting the System Audio option on the recording window. Please refer to the below image:
    Hope this helps!
    Thanks!

  • Recording Streaming Video-Audio

    A class I'm taking does not offer a permanent written syllabus or treatise to retain for reference, only a streaming video-audio. Is there any way to record or capture the show on either my iMac 20" Intel or MacBookPro Intel? This is strictly for my own use and reference.
    I presume this would somehow go into iMovie HD, which of course I have on these machines as part of OS X 10.4.9.
    Thanks for the help and suggestions.
    Dave
    [email protected]

    How do you access the stream? I.e. what format is it in, and what applications can you use to watch it. Some players allow you to save (or export) the stream. Some streams are setup so that these options become disabled in the player.
    Unless you want to edit the video after you captured it, iMovie will not be part of the solution.

  • Captivate 5.5 Software simulation video crashes when adding audio recording

    I run Windows 7 and Adobe captivate crashes after trying to start a audio recording in software simulation. My simulation is ready and the moment, I click the "record audio" button, the application freezes and I have to go to end the application via Task Manager.
    Solution approaches:
    I have started Captivate as administrator and that didn't help.
    I have then tried to look up my preferences but didn't find any files which i could identify as preferences.
    I have already tried the solution in the Note below (http://forums.adobe.com/thread/759455)
    Help please.
    Thanks,
    A

    I am having similar issues, but with the internal speach generator. I have both simulation and demonstration videos. I was able to enter text and convert to Paul's voice without issue, but the minute I tried to add closed captions Captivate totally locked up. And now when I try to do any sort of audio edit, no matter which method of access to the audio (using Audio - Audio Management or Audio - Speech Management or the Add/Edit Audio buttons in the Properties window or using the Closed Caption button in the Slide Notes tab or double click the audio wave file in the Timeline tab) Captivate totally locks up. I was originally able to create 1 file with closed captions but now it also locks up when I try to edit and no other file will let me add CC or use the Audio edit features.
    Captivate 5.5, Windows 7; run captivate as admin or not - no difference. Run captivate on my primary or secondary monitor - no difference; run captivate with or without other applications open - no difference.
    When I force close using Task Manager I did get a CpDump file that was created. Not sure what to do with that...I submitted a bug but have heard nothing back.
    I did follow the steps in the earlier referenced link about deleting the preferences. I also did not find a specific file/folder labeled preferences but my IT group said it was OK to delete the entire final folder in the referenced chain (Captivate 5). Once I did that, I had access to my Closed Captions again and could edit the audio.

  • Logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

    logic audio engine crashes while streaming video and recording 4 channels simultaneous audio

    Hi there,
    I also wanted to thank you for your response and let you know that I have tried all those trouble shooting things you suggest to no avail.
    it seems to me that the first explanations are most likely to be the case.
    namely that the program can multithread while the plugs only use one processor (particularly EXS24) which is bloody useless.
    also increasing the buffer to 1024 is not an option cause you gotta bloody lay tracks, which means you gotta hear the BG tracks and play yours on top in time otherwise, you record your new tracks and they are so out of time that it sounds like a little kid wanking on a guitar or whatever...
    and of course for composition with midi intruments it doesn't work at all cause your latency becomes so huge that you would need a miracle to quantize your off time notes back to normal so that you can arrange, print score, etc.
    either way, I hope that my tone is not disrespectful, it is aimed at apple in frustration, I'm grateful for your help.
    thank you
    David

  • No Stereo audio recording in HD video recording.

    Hi,
    I have Nokia 701.
    It's too bad that there is no true stereo audio recording while HD video recording.
    Though in specification it is given that there are two microphones for stereo recording.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

    I was right there with you. I posted early on in this thread and was working with tech support on the phone. We worked for a few days and it was like I was having to do too much work on my end. Nothing was working and they were so busy. Someone else posted that they took theirs back and it was an easy swap. I had already made an appointment at the apple store as a backup so I decided to drive the 50 miles. It was so easy....the guy really did not care too much about me working with support. He just tried a restore and was able to repeat the issue. Not saying that all stores are like that but I have had very good results with other apple products and getting support at the genius bar. Good luck...but you may be waiting a while. Seems that the hot topic for them is really the "reception" issue.

Maybe you are looking for

  • How to correct the time on a bunch of photos?

    I have imported a bunch of photos, but the time of the camera was not correctly set. Now I have to change the time of each photo by adding 4h 45'. Is there an efficient way to do this? (There is Photos → Batch Change... but this offers to add x minut

  • Error messages in opening and closing garageband

    when I open or start a project it says "Error reading/writing file \U201Ccom.apple.garageband.cs\U201D: Logical end-of-file reached during read operation." Then when I quit it says "The application GarageBand quit unexpectedly." ect Basicly its a bit

  • Why do my x values revert to 0 when I enter them in iWork's Numbers?

    When I am enetering my values for X and Y, whenever I enter a value for X, it reverts back to zero I am using Pages and I opened up the Chart Data interface this way. I am normally a excel user but I figured since I have iWork, and since its free, it

  • JTextField and alignment

    Hello, I hope I am just missing something basic. I have a class, KarJTextField, which inherits from JTextField. It does some things like change the text red when the users changes it etc, and that has all been working fine for months. Today I decided

  • Spry UI Image Slideshow preview in IE8

    Hello, sorry to re-ask a tired question, but I've scoured the forums and can't get  a handle on the answer. My issue: I have inserted the Spry Image Slideshow 7.1 widget in my dreamweaver (CS5) doc (thank you Widget Browser!), and made the necessary