Video-audio signals through firewire?

Gentlemen, we need to export our video-audio signals of our projects from timeline to a DV tape external deck recorders or a Betacam to be recorded into tapes too. In FCP7 we did it through the firewire i/o option from the timeline, but with FCPX we found it is not possible. Do you know if the version FCP X.3 will let me do this task? We edit long projects, as Broadcast programes for Television of one or two hours duration, in iMacs i5 stations.
Thanks to all.

I have the same problem here, having spent much time getting a workflow sorted in order to use Soundtrack Pro 2.02 via exported markers from Final Cut for a dubbing project it seems that when video is output onto a second screen the audio disappears (desktop preview).
Also get a message after about 5 seconds saying that ST Pro can't play the audio due to hard disk not fast enough (I can run a 36 track mix in Logic..) and to remove 'Long files' or quit apps, but am not running anything else and I only have one audio track!
Another thread with a similar issue suggested rebuilding permissions, this I have done and verified drive, plus tried using an external drive for files too. No difference. Seems interesting that the possible link is due to FCP export? I noticed at one point that ST was still referencing the original clips in FCP even after making them independent and exporting as separate files.
Also can't see the Timecode hud when it is on the second monitor when video is playing there (shows fine on desktop on second screen). It's vital to be able to see the timecode over the presented video as this is being fed to a dubbing cabin.
Come on Apple give us some support here as it seems rare that such problems get any direct answers from you! I've just paid a packet for the Final Cut Studio and Logic Studio suites and our whole production is being delayed by these issues (and many others!)

Similar Messages

Final cut pro audio output through firewire

Hi,
At present I'm using my macbook pro for video playback in an in house broadcasting studio. I'm sending my video and sound through firewire into a Canapus ADVC110 box and then I split the audio into my sound board, and my video into a video mixer. Unfortunately, I'm only getting one track of sound from FCP. Do you know how I could get both tracks going through the firewire? I'm hoping it's a simple solution.
Thanks

The problem is that I'm not sending it through speakers. I'm sending it into a mixer, that broadcasts to both televisions and simulcasts out of the headphones into a PA system. I broadcast out of a school. The problem is that the mixer only sees one side (audio track 1) It doesn't see the other side. However, if I hook a dvd player up to the same plugs on the mixer, it sees 2 sides.
Everything is cool for most presentations; however, when students do voice overs and they only go to one track, it may not be heard through the mixer.
Remember, my hookup is as follows: macbook pro - firewire - canopus advc110 video converter - then the video goes into a anologue video mixer (panasonic AG-MX70) but the sound gets split and goes into a audio mixer. The problem is that the sound out of the canopus box gives me only one side. I've tried replacing every cord, firewire, plug, etc, and the result is the same.
To survive the next few days of presentations, how do I send out a mono audio signal from my macbook, instead of a stereo audio signal????

Audio lost through firewire

If we send video out through firewire then we get the video signal but no audio, then when we change video output to none, audio returns via built-in audio. How do we get the audio to stay on when outputting video to Firewire (audio goes off when output to Desktop Video as well). This is with projects sent from FCP to STP. FCP audio plays fine through Firewire.

I have the same problem here, having spent much time getting a workflow sorted in order to use Soundtrack Pro 2.02 via exported markers from Final Cut for a dubbing project it seems that when video is output onto a second screen the audio disappears (desktop preview).
Also get a message after about 5 seconds saying that ST Pro can't play the audio due to hard disk not fast enough (I can run a 36 track mix in Logic..) and to remove 'Long files' or quit apps, but am not running anything else and I only have one audio track!
Another thread with a similar issue suggested rebuilding permissions, this I have done and verified drive, plus tried using an external drive for files too. No difference. Seems interesting that the possible link is due to FCP export? I noticed at one point that ST was still referencing the original clips in FCP even after making them independent and exporting as separate files.
Also can't see the Timecode hud when it is on the second monitor when video is playing there (shows fine on desktop on second screen). It's vital to be able to see the timecode over the presented video as this is being fed to a dubbing cabin.
Come on Apple give us some support here as it seems rare that such problems get any direct answers from you! I've just paid a packet for the Final Cut Studio and Logic Studio suites and our whole production is being delayed by these issues (and many others!)

Help needed with getting Audio signal through to Mac Book Pro (using Logic 9 & Behringer Xenyx 1204USB mixer)

Ok so I am sure I have everything set up correctly,
Logic has recognised and is using the mixer, I have sound coming through the headphones when I put in a drum sample onto audio track, no signal going in from audio using the first channel. Audio channel is set up with correct inputs & outputs. USB setting used on mixer......phantom tried on and off with the condenser mic I am using.....still no luck not even changing from mi to guitar. No signal when recording audio...... AAAHHH HELP! Racking my brains!
Thank you in advance

Kudos to figuring it out yourself.
Yes, Logic is geared to the professional user, you will need to set up the program to your particular way of working, Logic was well developed for professional use long before Apple purchased it, it's not an Apple program per se. It's complex and offers a myriad number of choices so that it can be configured to many styles of working, there's often 3 or 4 ways to perform the same function.
Logic insists the user educate themselves... which is a good thing.
Here ya go!
http://documentation.apple.com/en/logicpro/
"Exploring Logic Pro" is a good one to start with.
Also in the main manual... "Setting Up Your System"

IChat Video/Audio Conferencing through Cisco 2811/2821/Other ISR Device

I have found some discussion, but I still have yet to find resolution on this forum or Cisco's forums. I am trying to get iChat AV to work through a Cisco 2821 ISR (Integrated Services Router).
The problem is that AV calls running over dynamic NAT do not work. If any machine in the mix has a static NAT (esentially binding it to a global IP) it will work. If the machine on the other side has a global IP, it also works. It appears that either A) iChat will not function over a dual NAT-Transversal, or the ISR is taking the SIP packets and attempting to route them to a VoIP WIC that is not in the router.
Has anyone been able to solve this yet? Does anyone have ideas? I am working with Cisco on this, but thusfar, they too have no solution.

Hi Brent,
That would seem to cover any SIP binding to port 5060 which would stop the device trying to divert all SIP traffic to a Phone or Phone service (VoIP devices)
Formatting for CLI stuff is not my forte but I can tell you which ports you open.
Port 5678 on USP is where the invite go oit and come in on.
Port 5060 on UDP is where the application ngociates with the Buddy as to which ports from the group of twenty are used.
Ports 16384-16403 are the group of twenty ports also UDP.
iChat logs into the AIM server on port 5190 on the TCP protocol by default. (It can login on almost any port)
Certain chats and sending files and updates like Status Message and new Buddy pics, to the Buddy List, need port 5190 on the UDP protocol.
Jabber port are 5220, 5222 and 5223 for some older Jabber servers and GoogleTalk.
Bonjour needs 5297, 5298 and 5353 on UDP and 5298 on TCP as well for Local stuff.
See pic http://www.ralphjohnsuk.dsl.pipex.com/images/tableport.png
Do a Search for "Cisco" in the box on the right.
Change the Forum to the catagory of iChat to get iChat 2 and 3 results as I believe there have been older posts about this that might make this clearer.
10:13 PM Sunday; October 8, 2006

Audio output via firewire

I can not get audio working through firewire on my late 2013 MacBook Pro 13".
If I test channels in channel setup it gives me static, but if I play iTunes od Spybot nothing happens.
Internal speakers work fine.
Any ideas what to do?

I am connecting it through the firewire thunderbolt adapter. Then firewire 400/800 cable, because Presonus mixer has Firewire s400 port.
Funny is that iTunes worked fine in the morning. Then I started to check why I can not play Youtube through firewire. From Audio MIDI Setup - Presonus Firestudio - Output - Configure Speakers I changed Multichannel channels. That was all I changed.

Video/audio application sharing

Hi,
Is it possible to show video/audio files through application sharing.
Thanks &Regards
Developer

Hi Raghu thanks,
My requirement is, using application sharing i want to watch a video file running in mediaplayer from some others desktop.
Currently i can see all applications in my desktop thru application sharing except video(mpeg)\audio files.
When i try to see video files, mediaplayer comes with a blank view but the progress bar is moving while application is running properly in the accessed desktop.
Is this is a problem in streaming server ?
How to change the settings of streamingserver ? or any other solution available ?
Plz help me.
Edited by: EpDeveloper on May 26, 2009 8:00 AM

Audio bad: Sony analog video, RCAs into converter, firewire into PowerBook

Using iMovie HD 5.0.2 and OS X 10.4.9 on a PowerBook G4.
Importing video from a Sony analog video camera by running an RCA cable for video and an RCA cable for audio from the Sony camera into a Formac converter. From the converter I run a FireWire line into the PowerBook. With this set-up, iMovie captures the video okay, but the audio is only a rapid buzz; sounds like a perfectly regular square wave.
I can confirm that the audio signal is being sent from the Sony camera through the converter and on into the FireWire cable by using the same hardware set-up but using Final Cut Express to capture the movie. But I don't want to work in FCE, I want to work in iMovie.
What might be going wrong with the audio capture in iMovie?
several Mac OS X (10.4.9)

Welcome to iMovie Discussions.
As far as I remember, some of the Formacs (..I've never used one, but there was talk of this here..) exhibited this "chainsaw buzz" around the time that iMovie was upgraded to Version 4, I think.
(..Something to do with Formac's non-stringent interpretation of the Firewire spec, perhaps..)
Formac did post info about it on their website, and offered two kinds of upgrade; a firmware download/upgrade for some models ..which you could do yourself.. and a factory upgrade for others.
I don't know if they still offer either of these options, sorry..

Analog Video/Audio into G5 Quad via USB/Firewire

Hello!
I have a Mac G5 Quad and I already have a capture card installed for my
Betacam SP deck (it's a Blackmagic Decklink SP card). From time to time I'd also
like to capture video/audio straight from VHS, DVD and occasionally even
LaserDisc but I don't want to start disconnecting my Betacam SP-to-G5 cables to do
this.
Is there a quality device that would allow me to go from RCA video/audio
outputs directly into my G5 via USB or Firewire? I've done a bit of research
online and it appears that the quality of the output video/audio varies greatly
according to which device one uses.
Any advice, guidance or recommendations are much needed and most appreciated.
Cheers!
Mark Punswick
Shields Pictures, Inc.
San Francisco, CA
tel: (650) 652-6504
e-mail: [email protected]
website: www.ShieldsPictures.com

Canopus 110 or Canopus 300. They will convert the signal into a DV signal and the 300 will even clean it up.
Shane

No sound through firewire audio interface

-I know theres a million postings on this topic, but I'm going ahead anyway. I broke down my setup while I went on vacation.. i plug everything back in and i get no input into my audio interface. sys pref sound says the edirol fa-101 is the selected output. it is the selected input as well. firewire is obviously connected correctly if the the system is picking up as online. all monitors are connected correctly. when i switch output to internal speakers sound resumes. i tested this on itunes. when i switch back to fa-101 i get not even any input on the level meter. the fa 101 is not receiving sound. all volumes in sys pref are turned up, there is no mute activated. shut dwon and start up of applications and the computer do nothing. im stumped. could it be a faulty firewire cable? ill try hat and see what happens. any suggestions would be appreciated.
-the edirol is designed to work automatically with apple. you plug it in and it works automatically. i called tech support for edirol and they said that i would have to send the unit in. so i took the unit to the studio i work at and tested my exact same unit on an apple just like mine. lo and behold the darn thing worked. all the same wires and everything. but as soon as i took it home and tested it on my system again... nada. so now im convinced that my system has decided to not send signal through the firewire. this is very strange
-Ok so i tested my firewire. i used isight in either firewire port and it worked fine. i thought maybe my firewire bus was bad, but isight worked. there seems to be little clue offered. i really need help with this.
-Now ive run repair disk permissions and a whole truckload of bad permissions were found and repaired. it mentioned a lot of audio permission repairs. the i ran verify/repair disk. lots of repairs popped up. it said it was repaired and then it also said 1 volume could not be repaired. i tested the unit again and the problem is still not solved. i gotta find an answer. ill probably have to take it to the apple store. but what i really dont want is to see the computer disappear for two weeks to be repaired. ive decided that it is the computer itself and not the interface.
-checked other user account.. problem persists.
-reset pram, reset pmu, reset firewire bus, ran hardware test. all clean. what is happening?

adamlu-
An Archive and Install is in order.
Read the document before doing the procedure so that you will better understand what will be happening.
Luck-
-DaddyPaycheck

How can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

Using video and audio signal from a camera connect...

Why is it not possible and is skype intending to implement the ability to use the video signal form a digital camcorder connected to a tv?
A lot of people these days have digital camcorders or digital cameras that produce video signal. Why can't those be supported as video input by skype?

BC825 wrote:
..... Previously I had a HDMI to DVI cable and I had to awkwardly move the image off the PC monitor to the HDTV but with no sound. Should I send the equipment (Kanex VGA to HDMI converter and associated cables) back to B&H while I can still return them and get refunded....
Hi,
The following ports are at the back of your computer:
Figure 4: Back I/O panel
1 - USB 2.0: 4
2 - LAN
3 - DVI-D
4 - D-SUB port (VGA port)
5 - Audio: Line in
6 - Audio: Line out
7 - Audio: Microphone
You already mentioned DVI-HDMI : it works but no sound. That's true because DVI does not carry audio signals. All you need is using RCA cable to connect port #6 to your TV.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Timed video out through firewire?

Hey everyone,
In Final Cut Pro 5, is there a way to set print to video on a timer? For example, print to video on Friday at 2PM.... Or simply, just play the entire video in the timeline at a specific time?
I'm assuming not, so does anyone know of any program out there that can play Quicktime videos out through Firewire on some kind of timer system?
I know this is an unusual request... and I can explain why exactly I want this if anybody wants me to, but it's kind of a long story =)
Any suggestions would be great!
Thanks,
Dean.

You can easily set up an Automator script to work with an iCal event...
use the script for PLAY MOVIE instead of record new video that I used here:
http://homepage.mac.com/captmench/QTAuto.swf
The video was done in haste... and there are a few errors in it... but you'll get an idea of what to do.
Good luck,
CaptM

Video-audio signals through firewire?

Similar Messages

Maybe you are looking for