Video & Audio Tracks are not connected

For some reason my video and audio tracks are no longer conneted. It used to be when I would click on the video track that the 2 audio tracks that match it would also be highlighted so I could move them together, trim them together, etc. but for some reason now all my video clips that I put on the timeline are seperate (1 video and 2 audio) so I have to highlight all 3 lines to have them stay together, and it will not let me trim or apply transitions to all 3 at the same time. Is there a setting for this?

Make sure the "Link" button is on-- it's the small chain at the top right of the timeline, next to snapping. Once turned on, though, your clips already on the timeline may still lack cohesion; if so, select a video clip and the audio clip(s) that you want to link, and go Modify>Link.

Similar Messages

Audio tracks are not nesting

So all of a sudden, when I select the audio and video clips and right click > Nest....only the video tracks are being replaced by the nested sequence on the timeline while the audio clips stay intact on the timeline. When I look at the nested sequence all the audio clips have been copied there.

Ok, I'm officially upgrading this bug. Now, in Adobe Premiere Pro CC 2014, when I use the "Nest" command I get the same behavior as mentioned above. Except now when I drag the nest into a time line, it acts like the nest is not there and instead drags all the tracks in (6 tracks). Even if I try to drag a sequence into another sequence, it instead drags it in not as a nest, which is something I definitely do every day in CS6, but instead as all the separate tracks.
At this point, I'm starting to feel a bit like a beta tester on an unreleased product. Just a few more of these bugs and I'm going to have to go back to "last years model" CC until an update for 2014 is released.

Audio Tracks are not linked when imported

I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
Adam

There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

Midi and audio tracks are not synchronised properly?

no problem for a year and then after synchronizing my old Roland VS 880 in order to transfer audio tracks to a new project in my mac all new audio recordings run out of sync with the midi percussion tracks. They move along together but not quite in sync. It sounds as though the guitar parts have been badly played but believe me that is not the case.

Good question. I don't know. If the sampling frequency changed it did it on it's own because I have never even come across that before. I am going to look around logic to try and educate myself but so much time has been lost already I am at my wits end. We couldn't talk could we? Are you with skype?

Audio tracks are not importing into Premiere Pro CS3

I am importing video files but audio does not seem to come attached. I know that the files have audio since I've check iwth other media players. What may I be missing?

Most likely a CODEC that is not designed to be edited
Work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link... For question #1 use the FREE http://www.headbands.com/gspot/

Exported audio tracks are not starting from beginning of track

I have GB '08.
I export recorded podcasts (i actually make language learning CDs using an external mic) so each track ends up at between 20 sec or say 2 mins, to an Itunes playlist. I may play a track, and then click on another, by double clicking as is usual in itunes to start a new track, EXCEPT that it starts the new track at the place it was last time when it was played, even if it is its first time played in itunes, but was listened to some point whilst in garage band.
so the tracks dont start at the beginning of the track but rather where they were left off when last listened too. This happens also on my ipod with those tracks and i have to manually drag a track's progress bar back to the beginning to hear it from its start.
This is a disaster for my product. Is it a bug or is it a setting? Please help urgently.
Many thanks, Craig

Hi christoph, this is one of those headbangers.
the AAC and mpeg or exported as mp3 files both do it, which yes, is totally weird.
So, i can get the context menu, right clicking or cntl click, but what option is there to set it to new, as you suggest.
Thanks for your efforts
:)c
Hey, brother
I just got the solution in another forum. fascinating.
see the link http://forums.macrumors.com/showthread.php?p=7191871#post7191871
its about the "remember playback position" checked in the individual track options in track info.
Nice one.
Auf Wiedersehn.

Audio track edits not saved

I am using Captivate 4. I have a group of files where any edits I make to the audio track are not saved. The audio plays back fine in the audio editor. It just will not save the changes I make to the audio track (cut segments, add silent segments, etc.) I make a change, click OK in the audio editor, close the editor. When I reopen the editor the changes are not saved. I tried uninstalling and reintalling Captivate. I tried saving the file under a different name. Any ideas why this might be happening and if there is any workaround? thanks.

Hi there
You should ensure that Captivate has been updated to the most recent release. The developers released an update after the initial release. Additionally, you may need to follow what is outlined in this blog post. I had to do that on my PC.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

When downloading video into FCP my two audio tracks are locked together.

When downloading HD video into FCP my two audio tracks are locked together. Channel one will not separate from channel two. Not good. One channel is my miked talent, the other abient. Any suggestions? I cannot find the problem. Sequence settings? Preference settings?
Help!

gary Boland wrote:
When downloading HD video into FCP
I think you mean "importing", not downloading.
Downloading is when you copy a file from an Internet server to your computer.
Channel one will not separate from channel two.
Any suggestions?
Select the two tracks and choose Modify > Stereo Pair
Or you can just use the keyboard shortcut option-L

"The source and output audio channels are not compatible or a conversion does not exist" - ?

I'm trying to export from Premiere Pro for a f4v file that matches all source settings except resizing the video. I've done this a million times but today, when I hit EXPORT, I'm getting an error message from Adobe Media Encoder that says "the source and output audio channels are not compatible or a conversion does not exist." I'm using wav, mov and mts files in my audio tracks and everything plays happily in the timeline. Any ideas?
Thanks for any help!

Sounds like you unsuccessfully trying to output a 5.1 Master to a stereo or mono file. Or something along those lines.

Audio Tracks will not play

Hi there,
I'm using FCP 7 for a project that was originally edited in Final Cut 6 (I had to switch to 7 because BOTH my computers at home have crashed today which use FCP6, now I'm up at my office and have to use 7 - bad day, I know).
I'm trying to do some sound edits and only one audio track is playing (tracks 3 and 4) which are the source audio from the XDCAM Footage (note, these tracks have not been soloed - if that's a word). All my other tracks are not working. When played they produce no sound, but the audio meters to the right are moving. When played in quicktime, iTunes, or Finder they do indeed still work.
Audio Output has been set to Default, though I've also tried Built-in Audio Output. I'm using headphones, but it also does not play through the computer. I've also tried speakers. All other audio on the computer is fine - my volume is up.
Sometimes I can get tracks one and two to play after re-rendering.
RT is set to Unlimited, but it also doesn't work with Safe RT.
Any insight into this issue would be much appreciated!
Thanks

Go to Sequence Settings...then the AUDIO TAB. How many tracks of audio do you have? More than 2 and STEREO?
If you right-click on the track patch area on the timeline, you can assign these tracks to audio ouputs...are they set to anything other than 1 or 2?
Shane

Audio Tracks are silent after Narration PE12

Audio Tracks are silent after Narration. Mixer is at 0.0dB on all channels. Audio plays fine when double clicked but is silent when played back on timeline. Narration is fine. Any ideas as to what's happening and how to correct this?

c.s.radiation
What you described is a known issue with Premiere Elements 12/12.1. I have not been able to reproduce the problem which has been encountered by
several. But....
Please read about the fix offered by Llamadude99. That specific fix as well as modifications of it have resolved this problem for several.
http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html
After reading the above link content, determine if it works for you, and then let us know the outcome.
Thank you.
ATR

"itunes could not contact the ipod software update server because you are not connected to the internet" Help?

Hello all, new to the forums.
I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
I've already scanned through numerous websites and forums for help, but none of them worked.
This set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
# Open Internet Options from control panel.
# Click the Connections tab.
# Click the LAN Settings button.
# Select the Automatically detect settings checkbox.
Others include installing IE7, which that didn't work either.
Can anyone help?

Here it is:
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
LENOVO 2537FC4
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DB3100363E3C0
Current user is not an administrator.
The current local date and time is 2011-06-16 17:03:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 3100M
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
Description:          Intel(R) Centrino(R) Advanced-N 6200 AGN
IP Address:          192.168.0.3
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Thu Jun 16 16:54:56 2011
Lease Expires:          Fri Jun 17 16:54:56 2011
DNS Servers:          192.168.0.1
                    68.94.156.1
Adapter Name:          {610821DE-0532-4C65-839B-B74B65859FBA}
Description:          Intel(R) 82577LM Gigabit Network Connection
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:          {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
Description:          Bluetooth Device (Personal Area Network)
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection:          Broadband Connection
Connected:          No
Online:                    No
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-16 15:35:33.

Audio track will not record - picture is fine PE9

PE9 audio track will not record. Tried in several projects - audio gets through to computer - but the audio is not being recorded. Help please.

Hi ATR
Was transferring a client's DVD-R into my Adobe PE9 to do some editing requested by client.
The audio from the DVD was coming through clearly on my computer speakers but when I finished tranferring I stopped recording and discovered the video track was fine but there was no audio track.
Tried recording said DVD into some of my other files on PE9 but same thing.
Since posting my cry for help I uninstalled PE9 and reinstalled it.
This appears to have fixed the problem as I am now transferring client's DVD-R once again.
A quick check after a few minutes revealed the audio track is now being recorded with no problems!
Thanks for your interest.
Kind regards
David

HT201272 My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem?

My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem? I have already authorised my new computer and I am currently downloading my purchased music and videos however the books (audiobooks) are not showing for download.
Hope someone can help!

"My audio books are not showing up in purchase history,"
That is correct. You cannot redownload audiobooks.
" is anyone having the same problem?"
Everyone and it is not a problem. Audiobooks simply are not available for redownload.

Videos on Facebook are not playing

Videos on Facebook are not playing when I am connected to AirPort Extreme. They are working on LTE. Any advise? Please help

Yeah strange isnt it? I just tried it with my wife's 5C iOS 8.1.2 and it works perfectly and my lads iPad mini 3 is perfect too. It's just my iPhone 6,I have tried everything resetting network settings, hard reboot, remove/reinstall app, different updates of FB app. I am now leaning towards a full factory reset of i6 does anyone else have a clue as to why just the iPhone is affected?

Video & Audio Tracks are not connected

Similar Messages

Maybe you are looking for