Video black after playing
hi,
I have some event videos in my slides. After the video plays, in the video area appears black screen (just for a moment). It is really annoying, it is not nice at all.
I have been doing several tests but the black screen still there
Any help?
Thanks!
Sinera
hello Ajaneai,
I have tried externalize all resources. I have published in .swf and html. I have also with and without Auto Rewind. But still a black frame appears in video for a moment when video finishes
http://www.gestoriatrafico.es/captivate/black_frame.swf
thanks,
sinera
Similar Messages
-
Youtube scrren goes black after playing live video for 2-3minutes
I was watching the ipl live in youtube and after 5min the screen goes blank if the page is loaded again the it would work for another 2-3min then again goes blank
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Making video vanish after playing?
I would like to have an approx. half viewer height video play to open the cover of our publication, then fade to the full page composition. Anyone know how to make a video play, then essentially fade to what is behind it on the page? I have seen this before; a mag opens with a video at some size that is not the page size, then fades to the cover image.
Thanks in advanceI have going down the pallet in the Slideshow window:
Auto Play: On
Tap to Play/Pause: Off
Delay 28 seconds (per suggestion to achieve the video dissolve as discussed)
Interval: 1 sec
Play: 1 time
Loop: Unchecked
Stop at last image: Checked
Cross Fade: Checked
Speed: 1 sec
Thanks again -
ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully
Have you tried resetting your iPod: Nothing will be lost:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
Blacks out after playing video
My ipod blacked out after playing a video I downloaded from Itunes music store. Not responding, does anyone know how to solve this?
There is no screen event triggered when the video finishes playing that you can use to jump to the next slide or unhide a button to enable the user to navigate forward at a time of their own choosing.
If you know the duration of the video, you can place a navigation button on the timeline at that point so that it appears just after the video finishes playing. However, you may find that on different PCs with different system specs the video may take slightly more or less time to play. -
Youtube videos don't play after upgrading from 3.x to 4.0.1.
Youtube videos no longer play after upgrading from Firefox 3.x to the new 4.0.1.
The youtube page loads completely but the video never starts.
Firefox displays the page like its done downloading the video, but no video.
It displays as "done" loading the page with no activity in the page tab or bottom bar... but the video screen is black. Everything but the video loads.Hi There
I seem to have experienced the same problem, after applying the APEX 4.0.2 patch, my theme produced errors on the new type of date picker. I use the Bravo theme.
I am now trying to purchase the Delta theme, but unfortunately I see today on the Apex-Themes website that the themes are not available to purchase anymore.
Did you manage to resolve your issue? And do you maybe by any chance know where I can get hold of the Delta theme now?
Regards
Marissa -
Videos won't play after update
Updated iPad 1 to OS 4.3.3 and now all iTune videos won't play. Screen goes black and then resets with "Unable to play this video" message. Any way to fix without downloading 50gb of movies again?
Not sure if this was the fix but the problem was resolved. I was also having App store sync problems so I rebooted the iPad (hard reboot) and then immediately went to app store any updated all apps (video player want one of them) and after it was complete I did another hard boot/reset. When the iPad restarted I immediately went into the video player and Problem Solved! Nt sure how it resolved itself but it works without reloading the files. Never connected to my laptop or resync'dthe iPad but just did an update to all of my apps from the App store (there were 11 to update). Good luck with it.
-
ITunes videos won't play after 10.8 upgrade--checkerboard pattern
On my Mac Mini (mid-2009) connected to an LG TV, after upgrading to Mountain Lion, all purchased videos on iTunes play audio but display a gray/white checkerboard pattern instead of a video. The same happens when I try to play the videos in Quicktime.
Someone else posted a similar problem here -- https://discussions.apple.com/message/19104312#19104312 -- but my problem doesn't seem to be the same (a conflict with Edovia's TouchPad app). I do, however, connect to this Mac Mini through Screen Sharing, and perhaps there's a VNC conflict going on. Just to be sure, I turned off another Edovia app, "Screens," on my iPad, but the issue remained.
iTunes will happily play non-iTunes-store videos. Also, I'm able to stream the iTunes Store videos from the Mac Mini to my MacBooks (running Mountain Lion and Lion) and iPad without any problems.
Thinking it was a DRM-related issue, I disassociated all devices and computers from my iTunes Store account and then reconnected them. No joy. I repaired disk permissions. No luck. Lots of restarting.
Has anybody else run into this? Possible solutions? It's driving me batty.I am having this exact problem, however, it's only video content I download from iTunes. Anything that I've imported into iTunes, from alternate sources, will play just fine.
This seems to be a Quicktime problem as I have found that when you attempt to play iTunes files in Quicktime player, the same grey and white checkerboard pattern appears.
I am using my MacBook and MacMini in the exact same way. I am hoping there is an update to fix this probelm ASAP. This was my media center. -
Monitor won't enter power save after playing You Tube videos...
Hi
An issue has developed on my system in the last couple of months for which, after having done a lot of research and testing, a solution has not been found. After playing a video in You Tube, my monitor won't go into power save mode after the prescribed time. It tries to go off for a second and the screen goes blank but then comes straight on again. This happens after playing the You Tube videos in Firefox, Google Chrome and Internet Explorer. I am running Windows XP Professional and I have the latest version of Adobe Flashplayer installed, the latest graphics card drivers, the latest version of direct x 9.0c.
To clear this error, I have to go into my XP power schemes settings and change it to another power scheme and then change it back to my default power scheme. However, as soon as I play another you tube video the same problem re-occurs.
I have tried turning off hardware acceleration but this makes no difference. My graphics card is a Gigabyte gv-nx86t512h: http://uk.gigabyte.com/products/product-page.aspx?pid=2604#ov
This never used to happen until recently. It seems that there is something with the Flashplayer that is not compatible with Firefox, Chrome, Internet Explorer etc.
Any ideas as to what may be causing this and what can be done to overcome it would be greatly appreciated as it is a real nuisance.
Many thanks.
Dthanks for your suggestions.
i found the solution/workaround from somone else on the adobe forums:
Go to control panel, display, screen saver, choose a random screen saver, set a long time (i.e. 60 min, but always longer than your monitor shut off time), then select no screen saver, and save! Simple as that… -
I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1Try updating to iOS 6.1.3.
-
I CANT PLAY MY VIDEOS RIGHT AFTER SOME EFFECTS ON THE VIDEO premiere pro cs4
HEY
I can t play videos right after some effects it freeze for like half a second then it stops by its self and I have to enter play again its like a LAG PLEASE HELP I have xp I just bought yesterday with computer and all the requirements are done with higher speed and stronger.Read suggestion in post above. But main problem with that is the video card and disks setup, and XP is not very good choice for CS4 because of the memory limitations. You would be better of with Vista 32 bit or even better 64 Bit system.
-
Freezes after playing video playlist
My 60G freezes after playing my video playlist. I have to wait until the battery runs down then plug it in to reboot it for it to work again. I took it back to Best Buy where I purchased it, and they installed the latest update. They claimed this would fix the problem. Wrong! Any suggestions?
Thanks!There is no screen event triggered when the video finishes playing that you can use to jump to the next slide or unhide a button to enable the user to navigate forward at a time of their own choosing.
If you know the duration of the video, you can place a navigation button on the timeline at that point so that it appears just after the video finishes playing. However, you may find that on different PCs with different system specs the video may take slightly more or less time to play. -
Play again button after video is done playing
Hi,
I need help with some flash video stuff please... I am importing video into flash via FLVPlayback Component..
What I would like to do is have a button after the video is done playing that offers to re-play the video and may be another button with some other action.. I"m sure it's some kind of "if" statement... (to see when the video is done playing) but I'm very new to AS - I would really appreciate any help. Thanks ahead of time!!What I"m trying to do is have a movie play (with auto hide controls), and once it's done playing, I wanted to have an option to
either play it again or do something else, like to to all movies etc. Now my code doesn't give me any errors but it still doesn't doesn't do what I want it to do. Now it plays the movie and afterward the button appears.. but it doesn't restart the movie..
import fl.video.FLVPlayback;
import fl.video.VideoEvent;
import flash.events.MouseEvent;
bttn.visible = false;
player.addEventListener(VideoEvent.COMPLETE, addPlayAgain, false, 0, true);
function addPlayAgain(e:VideoEvent) {
bttn.visible = true;
bttn.addEventListener(MouseEvent.CLICK, restart);
function restart(e:MouseEvent):void {
gotoAndStop(1); -
why cant youtube play most videos even after the suggested flash player #
11 has been succefully installed?Can you please take a look at this thread, and see if it answers your question? http://forums.adobe.com/message/4937894
-
Issue with Youtube and Flash Player, videos don't play after a while
When I go to Youtube I can watch videos, but after I've player 5 or 6, when I select the next one, I get a snowy screen with a message "The Adobe Flash Player is required for video playback. Get the latest Flash Player". Issues is I already have the latest Flash Player, and it was playing fine just a minute ago. But from then on I cannot play more videos until I restart the computer. I'm tired of reinstalling Flash every day.
Win 7 64 bits, IE 9 and Firefox (happens with both)
Flash Player 11.7.700.202
Apparently the browser at first recognizes that Flash is installed, but then it doesn't find it anymore. Not sure how that happens.strangest thing... a few 'non-youtube' sites still work ok, but still complain 'no javascript' ..
so went to firefox (v17.0.4 ESR) 'tools, options, content' and yup, javascript UNTICKED!! :O :O my bad memory? something else??? {shrugs}
ticked it, now ok........ think im getting old?????? ROFL..
Maybe you are looking for
-
Pre Purchase Question: Adding a second hard drive on a DV4t
I'm really interested in the DV4T and I was customizing online but can't seem to find any option to add or even where to purchase an internal second hard drive for the SmartBay. Could someone help, Thanks in advance.
-
Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
-
I am a rookie DVD author but have studied hard and can do a pretty good job of creating a DVD. My question is "How do I build my DVD so that the images I have (500) play on the TV, without creating 6 slideshow Buttons"? My DVD player stops after 99 i
-
I want to limit some users ability to see most objects in other schema. Is there a privilege that I can revoke from public that will still allow a user to access a specified table but cannot do a select * from all_tables to find the table names. What
-
Hello. How can I protect access to a WebApp (or a servlet, or a HTML page) with ACLs ? In the WL console, you can define ACLs, but you cannot assign them to a WebApp. It seems that only roles can do that, or Have I to do some programing ? WL document