Video both in source window and edit window stops after just a few seconds. It also runs slow after a few seconds.

Video both in source window and edit window stops after just a few seconds. It also runs slow after a few seconds. I don't if the problem  is the fact that it;'s a Vimeo down load. Any one got a suggestion as to why?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Similar Messages

  • Video Stutters in Source window, in Playback and in Bridge

    I'm using the trial version of Premiere Pro CS5.5, running it on a MacBook Pro: 2.6 GHz Intel Core Duo, 4GB RAM, NVIDIA GeForce 8600M GT, 200 GB Hitachi hard drive with 50 GB of hard drive space remaining. My monitor is an Eizo FlexScan SX2262W. I'm editing 1920x1080 HD @ 24fps captured on a DSLR (Nikon D7000). The footage plays fine in Quicktime and also Lightroom, but in Premiere Pro it stutters when played in the source window or on playback, and also when I view it in Bridge. I read one post that suggested rendering the footage. This worked for the footage in playback, but not for the footage in the source window. What is causing the stutter and is there a way around it without having to render everything first?
    I'm a still photographer coming to video and am not very techie.

    http://forums.adobe.com/thread/860846?tstart=0

  • Resize Video, both the file size and actual size

    Hi All,
    I am very new to Adobe Premiere (CS3). I have had it for a while but not needed to use until now. A client of mine has sent me a video that he wants on his website. But it’s 150M and 1280 * 720. Can anyone help me out with how I can resize both the file size and actual size to say 800 * 450 so it can stream it via the net?
    Like I said very new to this,
    Cheers,
    Mike.

    The first thing you need to do is determine just what KIND of file you were sent, so you may start a project that matches the file
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    I don't do streaming video, so you should search the help file... I **think** what you want out is a Flash file, but that is only after you know what you are going to load into the CS3 timeline

  • Source monitor and programm monitor stopped displaying anything

    Hey there,
    I'm a CS6 Production Premium user and in severe trouble here: I'm working on a big 1080p AVC-Intra50 project for a client that is due next monday. I'm close to completion, but a couple of days ago, the source monitor stopped displaying video. It would show a still as I loaded in a clip, but as soon as I played back, the source monitor simply went black. The clip was playing though and audio can be heard. Not that big a problem, I thought, and simply used the program monitor for playback. But yesterday, the same thing happened to the program monitor as well. But not just that: Even the stills are gone now. Both monitors remain black at all times, even though playback and sound still work. So I got curious and tried different materials and different projects: AVCHD, DNxHD, even JPEGS, nothing shows on either monitors, regardless of the resolution. Still, everything works just fine on my laptop.
    So I completely uninstalled the entire Creative Suite, used the Clean Script multiple times, including reboots, deleted all remaining files from user and windows directories and updated all my hardware to the latest drivers. Nothing. Both monitors remain black and useless. I didn't change anything to my Adobe setup, nor my hardware or software configuration while this error occured. I searched the web for hours and I'm completely at my wits' end. Any suggestions?
    My system:
    Windows 7 x64
    Intel Core i7 2600k
    8 GB RAM
    ATi 6870

    I did purge the entire cache and database. Didn't help.
    EDIT: I'm sorry, I only purged the database. Now, that I deleted all cached media files manually, the programm monitors is working again, but the source monitor is still out.
    EDIT 2: Okay, now stuff is getting really weird: So the program monitor was working again. I continued editing for a bit, then put the program monitor into full screen and it went black again. Even when I went back to the normal size, it remains black, BUT, now the source monitor was working again. So I put the source monitor intro full screen and it went black again and both monitors stayed black.
    So after deleting the media cache, I had the program monitor working again. After full screen use, it went balck, but the source monitor was working. After full screen use on the source monitor, both monitors are black again. What is going on?!

  • Playback in Preview window stops after about 1 second

    Hi,
    When I hit the spacebar to view the clip in the preview window, the playback stops after about one second each time. It goes smoothly, then after one second, it stops. I can however drag the slider across the time line and there seems to be no problems.
    I'm sure I have a powerful enough computer, so I don't think it's something to do with ram (I have 6 gig ram, Vista, triple core processor, good graphics card... brand new computer bought yesterday)
    I'd appreciate help with this.
    Thanks!

    I'm not sure what you mean... I am importing from a DV tape which was recorded onto by a MiniDV Camera. When I plug in the camera to my fire wire, Windows gives me the options of AVI and WMV format (I am not sure which one to go with by the way, but WMV format seems clearer and 5 times smaller too.. why is that?)
    Any ideas?
    Thanks again
    EDIT: Also, I borrowed some video files on the net and premiere does the exact same thing- stopping after one second :/

  • Video and audio STILL Stopping after 2 seconds

    I am running Premiere Pro CS3 for Mac. For some reason, regardless of whether I capture direct fromDV cam or import a video or audio file. Occasionally (3 out of 5 times) the video and audio stops after 2 seconds. I hit space bar and it does it again. Ay ideas why?
    I am running this on a brand new Mac Pro too.
    Thanks,

    Please provide
    these details to help us help you.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Mail and contacts wont open on imac  also runs slow

    Mail wont open  contacts wont open  rus very slow   help

    Boot from your recovery partition (command-R at startup) and select Get Help Online. Safari will launch. Is it slow?

  • HT4623 I just updated my phone to ios6 and it says update completed, just a few ore steps and im done but wont let me go beyond that page when i press continue it just goes back to the ios6 screen "slide to update"???

    i just updated my iphone to ios6 and now it wont let me use my phone it says i phone was updated there are just a few more steps then im done but it wont let me get past the first screen it just goes back to the slide to update screen....

    If you are absolutely positively sure that the password you are typing in is your Apple ID password, I would try once more to enter the password. Be real careful as you type and make sure that Autocorrect is not changing what you are typing.
    If no luck try to proceed without entering the password. If you can get the iPad functional go into
    Settings > ITunes and App Store and log in there.
    If you can log into to your Apple ID there you will also need to go to
    Settings > Messages > Send and Receive and enter or check the email at which you want to receive messages,
    Also
    Settings > FaceTime > check or enter the email address you want to be reached by FaceTime.

  • The CPU fan starts with the case switch on and the system stops after 2 seconds

    Hi,
    I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
    The CPU fan starts when I switch on the power with the switch on the back of the case, but stops after two seconds. I don't get anything when I push the Start button of the case.
    At the beginning I got some feeble orange light on the D-bracket LEDs. Now, there is nothing at all.
    I have tried to do a CMOS and also to put the Mobo out of the case after having disconnected the HD, the DVD reader, the floppy disk reader and all the Front panel connectors ===> nothing changed.
    The Power capacity of my case is 300 watts. I had computed on Power Supply Wattage Calculator (http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php?cmd=AMD) that it is quite sufficient for my system.
    Other materials on my system: the MSI FX5200-T and a PQI RAM PC 3200 which worked well on a former MSI Mobo (K7N2 Delta). I don't intend to keep this RAM on my new system but I use it to test it, before installing the Corsair Value which are on the system with which I write this post.
    Thank you in advance for your help.

    Finally, it appears that I had damaged the motherboard and the CPU.
    When I installed the CPU, I hesitated because the User's guide said that "the gold arrow should point towards the lever pivot", whereas the illustration and the AMD's one pointed towards the opposite corner. I had finally made the good choice (that of the illustrations), but I have certainly displaced some pins of the processor while hesitating.
    The shopper told me that MSI will never agree that its text had troubled me and refused to give me a new motherboard.
    I have finally bought an ASUS motherboard and, as I was fed up with the computer building, I paid a technician to do this job.
    I would like to mention two other mistakes in the MSI K8N Neo User's guide:
    - it devoted one page to the installation of the retention mechanism which was already installed.
    - there was no explanation about the mention of two "Power LED" connectors.
    I acknowledge that I have been stupid, since I should have asked the question of the direction of the golden arrow in a forum, where I would have found very quckly the right answer to my hesitation.
    However, I am revolted that MSI does not acknowledge that a grave mistake and two troubling omissions in the User's Guide can lead novice people to grave failures.
    I'll never more have confidence in a company that make such mistakes and does not assume its responsibility.
    Once again, thank you for your help.

  • Premiere Pro won't let me drag an imported video from the Source window to my timeline

    I've tried to insert it, but it won't me do that either. It just gives me a "Do not Enter" sign next to my cursor. Any ideas?

    It sounds like you have not created a Sequence.
    Be sure that your Sequence settings match your footage by doing this:
    Or, right-click a media file and select 'New Sequence From Clip".
    How do I choose the right sequence settings?
    http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings

  • QuickTime and UTube movies stop & start. How can I re-set for slow internet connection?

    UTube will start the movie OK, but stops a few seconds in, then buffers the feed?, and then continues. Sometimes it doesn't continue. I have a rather slow dsl connection - ethernet to my 2011 imac running 10.7.5. My question is: Is there some way to re-set the buffer settings so the videos play without stopping?

    If none of the above works, please try the below.
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

  • CS3 crashes when Opening and saving files - also runs slow

    Today, while using photoshop, it locked up on me & I had to force quit. It then wouldn't open a file either via Bridge or the open menu. I could create a new file, but it would hang while attempting to save.
    I downloaded and ran the FixVCUIFramework, and it allowed me to open and save 1 file, before it started not saving or opening again. Running the Fix again has no effect.
    I switched to another user account, and everything works fine - in fact PS runs much speedier in the 2nd user account than in my main account. I hadn't noticed how slow it had become in opening and saving.
    Any ideas of where to look in trying to repair my main account? I don't want to have to migrate everything over to the 2nd account. Bridge in the 2nd account doesn't allow me to open all my folders, so I'd prefer not to work totally with a new user account.
    PSCS3 10.0.1
    Mac 2GHZ dual 4.5 gig ram
    10 gig external scratch disk - PS running at 71%
    Mac OS X.4.11
    A day without Photoshop is like a day without sunshine ...
    Thanks

    A forced quit WILL create corruption.
    An Archive and Install of the OS will give you a fresh system in your regular account while preserving your settings. Should take you less than 45 minutes.
    But you may want to try deleting your Photoshop preferences and running the 10.4.11 update over your existing 10.4.11 system first. That may work too, and it would be faster.

  • I have a new PC with Win 7 Pro and trying to xfer my libraries from my previous PC also running Win 7 Pro. How do I accomplish that?

    I have a new PC running Win 7 Pro 64 bit.  I want to xfer all of my iTune libraries from previous PC also running
    Win 7 Pro 64 bit to my new PC.  Thus far have been successful in doing so.  Any suggestions on how I should
    accomplish this?

    Yes.
    tomfromlong beech wrote:
    "Remember one one level of subfolders is allowed."  Does this mean that you can have as many subfolders as you want, but they can only be one level deep under the main folder?

  • TX goes blank and resets when deleting even just a few emails on versamail....arrrgh

    Any fixes out there?
    Post relates to: Treo 755p (Sprint)

    Are you deleting the emails according to the directions on page 366 in the user guide?
    Click on the following link for the support page for your device on the kb.palm.com webpage.
    http://www.palm.com/us/support/tx/
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
    Post relates to: Palm i705

  • Issues with video/audio playback and Source window

    I have some video that I am trying to import to get into my sequence. Anytime I open the video into my source window (or drag it to the timeline), the audio goes crazy. It starts skipping around and jumbling itself. When I open the video file in Quicktime on my computer, it opens and plays fine. Also, I don't know if it is unrelated, but sometimes when I open a video in my Source window, there is no audio. I can drag it to the Sequence and double click on it to bring the Sequence video into the Source window and it plays fine.
    The video that I am having issues with is a .mov filmed from an iPad (not sure which iPad model). It is filmed in Portrait mode, not sure if that matters. Please let me know what other information might be needed to troubleshoot this issue.
    Thanks!

    Ooh. Sorry about that.
    - I am using Adobe Premiere Pro CS6 v.6.0.3
    - I'm sure I have the latest update. I'm using Creative Cloud, and the Adobe Application Update Manager says everything is up to date.
    - Operating System is Windows 7 Professional (Service Pack 1)
    - Source footage is a .mov filmed in portrait mode (I didn't record it.. Haha) on an iPad, not sure the model.
    - I am getting no error messages.
    - I was just dragging the video file from the Media Browser to the Source window. Nothing special.
    - This is working on all of the other clips filmed from the same iPad at same resolution, etc. Also, this particular video plays perfectly in Quicktime. It's just when I try to play it in Premiere Pro.
    - Other software that is currently running is standard stuff: antivirus, Outlook, Gtalk, Dropbox. Nothing that uses audio.
    - I have installed K-Lite Codec pack when I got the computer.
    - I have a Dell Preision T7600, Dual Xeon Quad-core processors (2.00GHz), 16 GBs of ram, Nvidia Quadro 4000 (2GB), and running off of a 256GB SSD.
    - I am using the Mercury Playback Engine GPU Acceleration.
    - The issue is happening on playback, both in the Source window and the Program window when I drag the video to the Sequence. It plays fine in Quicktime.

Maybe you are looking for