Video Call between 2 IP Network

Hello,
I want to establish Video Calls between 2 independant IP Telephony network, one with a CUCM 6.1, amd the other one with A Call manager system. I have a Cisco 2811 on the Call Manager side, who have a IP Public adress.
The Voice Call is working with a H323 Trunk between the Call Manager Express, who have a public Ip adress too, and the Cisco 2811.
The Video Call is not working. I Have put the IOS to configure this 2811 as a Border Element (CUBE), put I don't have any licenses?
Is it necessary to have this licenses to function the Video Calls?
Is there some special commands to perform the video call?
Thanks in advance for your help?
Regards,

Hi,
I've tried to use a CCME and a CUCM6 using H323 trunk, inside a LAN (1000Mbps) but there is no video.
The option "Retry Video Call as Audio " is ON
Video Capabilities is Enabled
In the Region configuration of the CCM6, the video bandwitdh is 384.
But there is no video, just voice only.
====
In the CCME, the conf is :
dial-peer voice 201 voip
destination-pattern 8...
video codec h263+
session target ipv4:192.168.0.6
dtmf-relay h245-alphanumeric
codec g711ulaw
====
Can you explain the reason why there is no video?
Best regards,

Similar Messages

  • Can i send imessages or use Facetime video call between my ipad and my iphone despite being under the same ID?

    Is possible to send imessages or make video calls between an iphone and a ipad that are under the same ID? How do we set the system up? Thanks

    Here's a troubleshooter:
    iOS: Troubleshooting FaceTime and iMessage activation

  • We want Video Call on our 3G network.

    Video Call on on 3G network not Gtalk, Gtalk should have been a bonus. Why Nokia doesnt come forward about this issue because they promised on PR1.2 bt nothing, I reaaly dont undestand why Nokia is doin this,.
    Can someone from Nokia Developers take this into consideration. will it ever work???
    Awaiting for the developer to answer this.

    If you want an answer from a developer please ask your question on the developers forum.
    http://www.developer.nokia.com/Community/Discussion/

  • 3G video call and wifi open network issues

    I have bought Lumia 920 few days back. I'm facing some issue with WiFi.when I'm connecting with WiFi open network, connection getting connected but web page is not opening, but in my previous Samsung mobile is getting connected and working ok. I don't know why Lumia 920 only making trouble and also one more thing there no 3G or 4G video calling option in the mobile. So could you please help me regarding this issues.

    Are you having problems connecting to all wifi's or just this one? If just this one, you could try updating the router fimware.
    Your Lumia supports video calling using Skype. 

  • How do i set up video call between two huawei y550

    how do I set up video call to two huawei y550

    Hi,
    When you go into the contact you want to call is there not a little portrait icon/phone as this would be your video calling button.
    Thanks,

  • Anyway yet to video call between PB & other devices?

    I know Skype doesn't work, why they don't there must be some reason, licensing issue or something, but is there any other way to video chat between a playbook and an Android phone for example yet?
    I hear this all the time and thought it would have a solution by now. I've ordered a second playbook as think there really great little tablets, but need to video chat between other devices to
    Cheers

    Use www.faceflow.com This programme is exactly the same as skype but better, It has video conferencing. Both the sender and receiver must log into the site, become 'friends', same as skype. That's all there is to it. Oh, by the way it is cross o/s as it uses the site through a browser.  Hope this helps
    Regards
    Ross
    Regards to all (except BB)

  • Video call from Cisco 8945 SCCP to Polycom VVX 1500 Third party Sip Phones between intercluster trunks is not working

    Dear All,
                   We have two cucm Clusters in Different Locations between that clusters i created
    Inter-Cluster Trunk (Non-Gatekeeper Controlled) Now all are working fine Between Clusters
    audio calls & Video calls between sccp 8945 phones  , but iam facing a Problem with third party
    Video Phones (Polycom VVX 1500 ) Third Party SIP Phones located in second cluster, From 1 st cluster cisco 8945 Video
    phone to  2nd cluster Polycom Video phone all calls are works for voice call only, but no video ,
    Please Suggest me Solution.
    Thank you,
    Sriman

    Try setting up a SIP trunk between the two clusters and set a route patten just to the VVX 1500 and check how that goes. 
    From memory inter-cluster trunks are a H.323 like protocol which might have video inter-op issues with the Polycom device.

  • Two EX90 devices can make video calls over Internet with No VCS-C and VCS-E

    Dear Experts;
    I  have just started TelePresence and VCS 2 weeks before by going through cisco docs and videos and I had taken a risk of implementing the infrastructure elements.
    We are now implementing Cisco Tele presence with VCS-C, VCS-E TMS,TCS,MCU and End points with  Jabber in One setup.
    and in another setup CUCM 10.5,UCCX 10.5 IM&P,Jabber with some 10 agents.
    Now the question is In our same building in 2nd floor we have one EX90 and in 5th Floor one EX90 and over LAN we can make video calls using IP address.
    In the same way is it possible to make  a video call between 2 EX90 devices present in different location in the same city over Internet without the involvement of VCS-C and VCS-E.
    Appreciate your valuable reply.
    Regards
    Debashis

    The simple answer to that is NO! Where is the EX90 registered to at the moment? Is it on the VCS? or CUCM

  • Looking for Video call soluation

    Dears ;
    Good evening I want to know if there is a solution for video calls between 2 citys via VPN link if there is virtual solution or programs
    Thanks all and sorry for bad English
    Posted by WebUser Mohammadrios Hakawaty from Cisco Support Community App

    Hi ,
    It is not clear what the specifications of your setup are supposed to look like . However could take a  look at "
    Cisco Virtualization Experience Media Engine"  since you plan on having voice and video in a virtualized environment :
    http://www.cisco.com/en/US/products/ps12862/index.html
    Hope this helps!
    Regards,
    Karthik Sivaram

  • Skype Video Calling

    I installed the latest version of Skype to test out video calling between our iPhone 4's and 3GS 8GB, but there is no link for "video" on the contact page - only "call" and "SMS." The other phones also have skype installed. A regular phone call does go through, but no link to video calls.
    Any idea what's going on?

    You can only make skype calls from within your skype app. You don't have any link to skype video calls from within your contacts page. You have to go into your skype app select one of your skype contacts that are online at that time and tap the video call button.
    You can't make skype calls to any of your contacts from your phones contacts list; you have to go through skype
    Message was edited by: neoakl

  • Insufficient Funds when placing Skype (video) call

    I've been statoned in okinawa japan. 
    I purchased the skype number so that i have state side phone number for people to call me.
    I purchased the unlimited us and canada subscrition so that i may call back to anyone in the states.
    I have $5.00 of skype credit (going to expire in sept). That i've never used. 
    I have little to no problems while trying to call from phone to phone. But when i try to do a skype to skype (mainly video call). I get the error that I have insufficent credit. I get this on my mobile phone as well as on my xbox one.
    On the other end they see that i tried to call and they are able to successfully call me back.
    Any help would be greatly appreciated.

    On which mobile phone are you using Skype? Are you running the latest version?
    Audio and video calls between Skype users are free so you should never see this message.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Video Call with more than 2 people?

    Hi !
    I've seen that video calls for groups are currently not working on Skype for Android : We can join a video call between 2 or more people but only with the audio : we can hear everything, but we can't see anything (or being seen by the other people of the group).
    But i'd like to know if something is currently being developped to fix this issue for Android users or if nothing is currently done ? (i don't care if i have to pay a few extra $$ in order to have this option).
    Thanks a lot in advance for your reply
    PS : English is not my mothertongue.
    Solved!
    Go to Solution.

    saad
    Attachments:
    extreme-planking.jpg ‏2 KB

  • N8 Video calling application

    Any Microsoft windows based application fop nokia N8 3G/Wify user?
    Recently Iphone release MAC based video calling application 
    http://www.apple.com/mac/facetime/

    Sony wrote:
    Any update
    Apple iPhone's Facetime and the Android's Flashtime is not real 3G Video Calling!
    You should not need 3rd Party Apps to Video Call between phones.
    See this Tube between an N95 and a Windows Mobile HTC Desire...
    This is how Video Calling is supposed to work!
    http://www.youtube.com/watch?v=OYVBok0I6EE

  • CUCM 9.0 and SX20 video call - inter region

    Hi Guys,
    I am having an issue establishing a inter region video call between 2 SX-20 endpoints.
    Call works fine when I move them to same region
    I have made the CAC to unlimited for video on the Locations
    I have played with the Video Bandwidth in the regions.
    I have changed the defaults under the Service Parameters for Inter and Intra Region
    I have tried to adjust MAX and MIN under Conference 1 on the SX20s
    I have tried changing the default video call bandwidth to both 384 and 768
    In every case, Call works fine when both endpoints are in same region and just and audio call when interregion (G711Ulaw) .
    For some reason its not presenting the right codec.
    Also in CUCM 9.0, I am not able to collect the SDI traces on the endpoints. it says "Trace not found for Service Call Manager, trace type 'sdi' " which is a reported bug in older releases but was fixed. I guess it has returned too ...
    Any suggestions ?

    Hello Varungulati,
    I'm having the same issue, did you manage to solve this problem ?
    Thanks,
    Nadjia

  • How to make video calls on i phone 4s

    how to make video calls on i phone 4s

    kalidag
    Currently Being Moderated  Re: how to make video calls on i phone 4s
    Jan 30, 2012 1:35 AM (in response to wjosten)
    but we can make video call using our SIM network.. it charge morethan a voice call.I am looking for that on my i phone
    Dear cheonweb,
    The person asking about  3G video cal with out using GPRS(cellular network data plan or wifi) by using cellular network data plan it is possible but with out using cellular network data plan we cant make 3G video cal in apple phones.

Maybe you are looking for

  • Mail crashes when trying to open Message viewer

    I just migrated everything over to a brand new macbook air (13-inch) from a macbook pro (late 2010) that was running os x 10.6. Everything seems to work great except Mail will not work -- it initialized fine, retrieved messages etc but when I try to

  • Help with number counting project

    the program is supposed to let the user enter numbers and and then return the numbers they entered and how many times they entered each one. this is what i have so far and i dont know what i need to put next so can anybody give me a hint or help me p

  • How much does it cost to fix iphone5 screen?

    Hey, so dropped my iPhone 5 and the bottom half of the phone screen has cracked. It's not unusable, you can still make calls, but it's hard to see what you are doing! How much do you think it would cost to fix the screen? Would it be cheaper to just

  • Labiew lib for modbus over RS485 over USB

    Hi, I have the following problem which I would be grateful for any help to solve. I have a digital meter device (lumel NA5) which has RS485 interface, and modbus protocol over it. A possible solution I'm contemplating is to get a RS485 to USB convert

  • Crystal Reports Field Loop

    Hi Guys, I want to add a field in my report, by the name of week number. Obviously I need it to repeat 52 times in either the details or group header section. So I created a formula field with a loop, and I want it to print out from 1 to 52 (i.e. the