Video call (ip phone)
Good day,
I just want to ask if there's any additional equipment needed to implement the video call technology. Are the equipments used in voip technology can be use for that? Can you give a list of the hardware and software needed. Thanks!
Call control (CUCM/CME), basic network infrastructure as needed (ISR, switches, etc), video phones.
Or you can also have VCS, and SIP/H323 endpoints
You can reach a Cisco Gold partner for a free quote if you're looking to deploy a video solution.
Similar Messages
-
hi, i just want to ask you about your produce i phone 4 for the said face time or vedio calling. can it be used only for same i phone product or all the mobile in the world like nokia and blackberry
ronrico wrote:
as if you are mis leading the consumer......
You aren't addressing Apple here. This is a user-to-user tech support site. Apple doesn't participate here. We are all iPhone users like yourself
There is nothing whatsoever misleading about how FactTime is described by Apple. It works EXACTY as stated. If you are mislead, it's due to your inadequate reading comprehension or lack of effort reading what Apple actually said.
There is no "international" standard for cell phone video calling. Most other phones use proprietary systems or 3rd party apps such as Skype (which also works on iPhones). FaceTime is on WiFi internet connections only because all carriers have refused to allow it on their cell networks due to the huge number of iPhones. The FaceTime standard is open source and other manufacturers are free to implement it, but have refused so far. -
Hi
Anyone any ideas how to resolve the following. When I make a video call to my g/f, after 4 or 5 seconds the fone freezes up and then shuts down and restarts. I'm on o2 and have firmware version 11.018. Any advice is much appreciated.
Many Thanksour operator must approve video calling
your phone too
and you must be in 3G coverage area
that's it
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2 -
Any Microsoft windows based application fop nokia N8 3G/Wify user?
Recently Iphone release MAC based video calling application
http://www.apple.com/mac/facetime/Sony wrote:
Any update
Apple iPhone's Facetime and the Android's Flashtime is not real 3G Video Calling!
You should not need 3rd Party Apps to Video Call between phones.
See this Tube between an N95 and a Windows Mobile HTC Desire...
This is how Video Calling is supposed to work!
http://www.youtube.com/watch?v=OYVBok0I6EE -
3G+ Video Calls on a Lumia 900
Hello!
I've posted this once in another thread, but I don't seem to have noticed, so I'm opening a new thread for it. .
With a recent price-drop (thanks to WP8), I bought a Lumia 900 for my girlfriend. She really wants video calling, and while, my phone is capable of it, it doesn't have the comfort of skype, so we have no choice but to use 3G+ video calling through the operator, which should be fine with my subscription, except, her Lumia doesn't seem to work with this variety of video calling. .
I can use my phone to video call other phones, but not a Windows Phone. Our operator's Customer Service agents aren't exactly familiar with Windows Phone, so they seem clueless. I can't resort to Skype-to-operator type of calling, because then I'd have to pay for Skype Credits AND her 3G. .
In a nutshell, I need help with video calling without using Skype or Tango. . Help?
Model: Nokia Lumia 900
OS Version: WP 7.5
Issue: 3G+ Video Calls (without using Skype/Tango/etc)
I can't imagine me being the only one who has an issue with this, so if there's any solution out there, please help. .
SIlverVideo calling as per symbian phones is not possible with wp devices. Video calling on windowsphones is by using skype or other 3rd video calling apps. This is a Microsoft constraint. If you wish to request a feature, you should direct it to microsoft on the windowsphone.uservoice.com site. But i wouldnt get my hopes up. Microsoft are working at deeply integrating skype into the os.
-
Syed Shahzad
Hi and welcome to the Skype Community,
Please take a look at the instructions here on how to perform a video call using Skype for Windows Phone: https://support.skype.com/en/faq/FA12181/making-a-video-call-windows-phone-8
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight
This is a wireless carrier issue. The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
Contact your wireless carrier about your call quality issue. -
When I try to answer a skype video call on my Ipad (2nd generation), as soon as I click on the phone or video icon the call is ended. This only happens with one of my contacts. I can video call them without any problem! But not in reverse. Any suggestions???
You may have better luck posting this on the Skype forum to see if anyone else has had the problem.
-
Is there a way to make a video call from my iPhone 4 to a non apple phone? Also is it possible to transfer pics using bluetooth from iPhone to other company mobiles? Its a great phone but sometimes I feel struck inside it.
You'd need an app like Skype to video call with other phones.
Data transfer is not supported via bluetooth and iphone to iphone is not supported at all. -
Just set up advanced calling 1.0 and restarted my phone but "Video Calling" is not in my groups under contacts
iphone 6/6P do not support AC 1.0 HD video calling at this time. It does support HD voice, but there is no HD indicator, but you can immediately hear the difference.
-
How to video call with other phone using Iphone 4??
Hii
Anant Patel here.
How to use iphone 4 for video call to other phone like nokia or others.??Skype, if the other phones support skype.
-
I phone 4 video call with skype
hi everybody ,
can some body tell me how can i video chat with skype ?
I have i phone 4
thank youfirst of all you would ask in the iphone forum and not the appletv forum.
second of all, skype on the iphone does not support video calls. -
Dear All,
We have two cucm Clusters in Different Locations between that clusters i created
Inter-Cluster Trunk (Non-Gatekeeper Controlled) Now all are working fine Between Clusters
audio calls & Video calls between sccp 8945 phones , but iam facing a Problem with third party
Video Phones (Polycom VVX 1500 ) Third Party SIP Phones located in second cluster, From 1 st cluster cisco 8945 Video
phone to 2nd cluster Polycom Video phone all calls are works for voice call only, but no video ,
Please Suggest me Solution.
Thank you,
SrimanTry setting up a SIP trunk between the two clusters and set a route patten just to the VVX 1500 and check how that goes.
From memory inter-cluster trunks are a H.323 like protocol which might have video inter-op issues with the Polycom device. -
In firefox os smart phone video calling is compatible or not
In firefox os smart phone video calling is compatible or not
Hi sanatankumarsahu,
Video calling is currently not available on Firefox OS, but there is ongoing work to make this possible natively on Firefox OS and web browsers through WebRTC technologies:
* [https://blog.mozilla.org/blog/2014/10/16/mozilla-and-telefonica-partner-to-simplify-voice-and-video-calls-on-the-web/ Firefox HELLO]
Thanks,
- Ralph -
Cannot get video calls to work on two 9971 phones.
we are using two 9971 phones, both have the cameras enabled, and the preview video button works, but we do not get video on any calls.
camera has been enabled in the Enterprise Phone parameter.
CUCM 7.1.5.1
so, we should be fine for service pack level. anyone have any ideas? both phones are set to "auto transmit" video.Ok, now you'll need to do a few things for real-life:
Adjust the per-call bandwidth (region) and total bandwidth (location) on CUCM. The table below will help you calculate what values to plug into the fields.
Note, there are system-wide inter-region default values under Service Parameters. Set that first and then set the fewer one-offs on the regions/locations individually.
The 9900 series phones support several different video resolutions per the data sheet on Table 6.
Bandwidth consumption for each of the supported resolutions is not well documented; however, the CSF-based clients release notes actually mention it on Table 11 provide a table. Note that CSF may not support the exact same list of resolutions so use this only as a guideline.
Do not forget to update your QoS configuration. Be careful not to undersize the video queue; this traffic is bursty unlike voice.
Cisco Call Admission Control Bandwidth Values
This table identifies the appropriate bandwidth value calculations to use with CUCM or IOS. This table was originally obtained from the Cisco Live 2010 session BRKEVT-2300 presentation.
UCM Region
UCM Location
H.323 Gatekeeper
IOS MQC LLQ Class
Audio Only Call Configuration
Audio-Only CODEC
Audio Bit-Rate plus Layer 3+ Overhead
Twice the Bit-Rate
Bit-Rate plus Layer 2+ Overhead
Video Call Configuration
Audio CODEC plus Video Call BW
Video Call BW
Twice the Bit-Rate
Bit-Rate plus 20% Overhead*
Audio Call Example (G.711)
64kbps
80kbps (One Call Allowed)
128kbps
95.2kbps (on IEEE 802.3)
Video Call Example (384k)
384kbps
(64kbps for audio and 320kbps for video)
384kbps (One Call Allowed)
768kbps
460kbps
*This is a reference value for typical Cisco video endpoints such as CUVA and the 9900 series phones. Adjustment may be required for new CODECs or other models and manufacturer equipment.
Please rate helpful replies.
Message was edited by: Jonathan Schulenberg to qualify UCM Region Video Call Example
Maybe you are looking for
-
Error while transporting query
Hi All, I am transporting query from one client to another. Initial it's generate a request number when I exported. But when I am importing the same request number in another client it's saying that 'dataset does not exit. Although I transported quer
-
Importing packages for XMl parsing
In my Java program,statements to import org.w3c.dom, org.xml.sax, javax.xml.parsers, javax.ejb packages are not working.Can somebody tell me which jar files I should add in the classpath of my machine?
-
Hi , I got an error in GB Payroll - Under 'Gross Payment [time management, function - PIT , PCR - G013 , /001 Valuation basis 1 I am getting an error , which says- Division by Zero not performed - Do any one have any idea why the PCR is broken half
-
FCP Wont Send To Color???
Hello All, I am running FCP Studio 2 on my Mac Pro Quad and when I select my sequence to send to color it does nothing as if I didn't click on it. Does anyone have any suggestion on what's going on? Please help. Thanks
-
Help please for an xmas present for my retired father
Hello all, My dad recently retired from his job after a heart attack and after a long recovery has gone out and treated himself with a brand new imac and Final Cut Studio 2. He loves video editing and I would really like to buy him some training mate