Video call stops and skype shuts down about 30 sec...

When I try and make a video call it will work for about 30 seconds before the program shuts down.  If I do a audio call only it works fine. 

Please,  run the DirectX diagnostics tool.
Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Kernel panics every time (shut down your computer). When it stays on I get blotched video, left-over spots, tearig and then shut down your computer...

    I use my PowerPC Quicksilver G4  (2.1), 867 MHz, 1.5 GB standart video card system 10.4.11 to scan (lack of driver for my Mac Pro 10.6.8)
    The G4 has been running flawless, now I get kernel panics every time (shut down your computer). When it stays on I get blotched video
    left-over spots, tearig and then shut down your computer...
    I did all recommended software tests Diskutility, rebuild with DiskWarrior and Apples full Hardware test. Everything comes out fine!
    I am at the end of my know how. Thank you for any help
                                                                                                             W.W.
    I am attaching the latest crashreport:
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000047AC834E PC=0x0000000000821D3C
    Latest crash info for cpu 0:
       Exception state (sv=0x37D2EA00)
          PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
    0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
             0x00029234 0x000233F8 0x000ABEAC 0x5038514E
          Kernel loadable modules in backtrace (with dependencies):
             com.apple.GeForce(4.1.8)@0x7ff000
                dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
                dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
                dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
                dependency: com.apple.NVDAResman(4.1.8)@0x636000
    Proceeding back via exception chain:
       Exception state (sv=0x37D2EA00)
          previously dumped as "Latest" state. skipping...
       Exception state (sv=0x38A98780)
          PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
          Backtrace:
             0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
       Exception state (sv=0x37D2EA00)
          PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
          Backtrace:
    0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
             0x00029234 0x000233F8 0x000ABEAC 0x5038514E
          Kernel loadable modules in backtrace (with dependencies):
             com.apple.GeForce(4.1.8)@0x7ff000
                dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
                dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
                dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
                dependency: com.apple.NVDAResman(4.1.8)@0x636000
       Exception state (sv=0x38A98780)
          PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8 Model: PowerMac3,5, BootROM 4.2.5f1, 1 processors, PowerPC G4  (2.1), 867 MHz, 1.5 GB
    Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
    Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333
    Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
    Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333
    Modem: Spring, UCJ, V.90, 7.0F, á¸
    Network Service: Built-in Ethernet, Ethernet, en0
    Parallel ATA Device: WDC WD1200JB-00GVA0, 111.79 GB
    Parallel ATA Device: ST3120814A, 111.79 GB
    Parallel ATA Device: PIONEER DVD-RW  DVR-103
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA

    Thank you for your reply BDAqua.
    Yes I ran short and the Extended Test. All pass. One of the first things I did is Safe Boot several times I also repaired permissions. Safe boot takes no longer than before the crashes and as long as I stay in safe boot mode it won't crash. What does that mean?I also ran MacJanitor and removed the SCCUZI card Apple put in when I bought the G4 as well as an M-Audio Delta 66 card which I do not use (both) anymore. I also started up on an external firewire drive 10.4.6. It also (crashes) does the same thing.
    I was hoping somebody understands the crash report I enclosed? Isn't that suppose to say what went wrong?
    Thank you again for your input BDAqua
                                                                  W.W.

  • Skype shutting down, and then impossible to restar...

    So i was just watching some youtube, when i uddenly heard my skype shutting down. When i tried to restart it, it didn't recocnice my password. I changed my password and i got an I/O error (whatever that is), i then tried to uninstall skype and reinstall and now i can't download it without getting a code 1603 error. any idead as to how i fix this?

    Try to re-install Skype using this msi-installer for the currently latest 6.21.0.104 version:
    http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi
    Make note of any error message received when installing Skype.

  • Why do online videos start and stop and what to do about it

    why do online videos start and stop and what to do about it

    It usually means a slow internet connection, or inadequate hardware or both.
    It is not a 10.6 problem as such as 10.6 handles video streaming quite well.
    In your post this tag seems incongruous in this 10.6 category. 

  • HT5361 The quit line in my mail application is not accessible and stops me from shutting down my computer (it displays a message saying that "mail has blocker shutdown"

    ?  the quit option in my mail application is not accessible and stops me from shutting down.  Does anyone know what is wrong?  It started after my cable company installed a  new router and modum.

    Linda,
         see the link on the right with the highlighted tick. In short click on the apple icon at top left and choose the wayward app from the 'force quit' dialogue.   Another way is to put an icon in the dock for the Apple utility, "Activity Monitor". Set it to show all users processes and highlight that for the wayward app. The choose 'Quit Process'.  BE CAREFUL, do not choose the low number processes which are fundamental operations for the whole OS.

  • EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

  • When I was editing a picture that I reposted on instagram, I hit the edit button and then a white screen appears and randomly shuts down. I have also noticed that my iPod has been crashing about every single 30 minutes!

    When I was editing a picture that I reposted on instagram, I hit the edit button and then a white screen appears and randomly shuts down. I have also noticed that my iPod has been crashing about every single 30 minutes! Please help!

    The iPod crashing when editing a photo is a known bug in iOS 5.1.1.
    For the other problem.
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • I installed Photoshop 13 which appreared to do fine. Everytime I try to open it I get the message "Photoshop has quit working and is shutting down." Why?0

    I installed Photoshop Elements and Preimere 13. This appearred to install properly but I can not open it. When it opens the circle goes around for awhile but then a pop up say that Photoshop has stopped working and is shutting down. Also. how do I get my photos from Photoshop 10 into Photoshop 13?

    You don't have "Photoshop" proper.  You have a cheapo emasculated version called Photoshop Elements.  That is NOT Photoshop.
    As Gene told you:
    Unfortunately, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

  • I receive an error and iTunes shuts down every time I try to sync my iPhone

    Every time I try to sync my iPhone, I receive an error and iTunes shuts down. I have uninstalled and reinstalled iTunes at least 3 different times and still no luck. Any suggestions please.

    Thanks for the answer. The sync process goes well until the last step,(5th) when iTunes try to syncing pictures. At that point I got an error message telling me that iTunes doesen’t work properly. “Windows tries to find a solution to the problem” ...and then the program shuts down. I remember that I tried to include videos in the Photo tab just before it all happend, so I think that is the issue here.
    The problem is that i dont know how to uncheck include videos option since the program stops working. Is it something i can do without having my iPhone connected? I Saw that some have installed older versions of iTunes to go around the problem and if that solves it all, at least for now... where can I download it?
    Thanx in advance. M

  • Mid-2011 i7. iMac and USB shuts down on sleep

    Just got a refurb i7 21" and am loving it. But I was having trouble with it shutting down when going to sleep and therefore not waking from sleep without a full boot up.
    After finding this closed thread (https://discussions.apple.com/thread/2258706?start=0&tstart=0), I wanted to confirm that unfortunately even after the Lion 10.7.2 update, some powered USB hubs (for example Newer Tech 7 port powered about 1 year old) still cause the iMac to shut down on sleep.
    A new Belkin 7 port powered ("high speed for 2.0 or 1.1 devices") does the trick and now the iMac will wake from sleep properly and not shut down.
    Just wanted to pass this on to others who might be having trouble and wondering if their motherboard is fried or something.
    Also, if a USB port stops working, do an SMC reset (unplug, hold power button down).

    Just got a refurb i7 21" and am loving it. But I was having trouble with it shutting down when going to sleep and therefore not waking from sleep without a full boot up.
    After finding this closed thread (https://discussions.apple.com/thread/2258706?start=0&tstart=0), I wanted to confirm that unfortunately even after the Lion 10.7.2 update, some powered USB hubs (for example Newer Tech 7 port powered about 1 year old) still cause the iMac to shut down on sleep.
    A new Belkin 7 port powered ("high speed for 2.0 or 1.1 devices") does the trick and now the iMac will wake from sleep properly and not shut down.
    Just wanted to pass this on to others who might be having trouble and wondering if their motherboard is fried or something.
    Also, if a USB port stops working, do an SMC reset (unplug, hold power button down).

  • No sound and PC shuts down when I try to watch anything streaming

    Just finished build PC with a 970A-G46 mobo, FX6300 , 8GB Cosair DDR3 1333MHz Ram, Sapphire HD 6570 Ultimate 1024MB GPU and CIT 750W PSU and running Windows 7.
    Connected by HDMI cable to monitor which works with my old PC. I currently have no sound through the monitor when I either watch YouTube or play a DVD, have connected a Optical Cable to my Sony hi-fi and that does not work either, have tried optical cable via a USB converter as well (this worked on my old PC). After about 2 minutes of either watching streaming video or DVD the system shuts down and the power light flashes.
    Possibly a conflict on audio drivers but how do I test this and correct if it is.

    I've got the sound working by disabling all the other outputs and leaving the HDMI on and this worked. Ran the BIOS and the System temperature was 32 degrees and CPU was 34.
    System shut down twice, first when viewing YouTube and second when rechecking temps. New PSU?

  • Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9

    Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
    •Which version of Quicktime do you have installed?

  • Dreaded Black Screen and automatic shut-down.  Why does this happen ?

    Why do I get a Black Screen and automatic shut-down ?  My iMac felt warm...and I never hear a fan go on..could overheating be why it shuts down?

    Hi Tish,
    A few things.
    If you bough this iMac used with no original install/hardware test discs, you can call Apple at 1-800-MYAPPLE ask for software sales and tell them you need a set of iMac replacement install/hardware test discs. You'll need to give the Apple rep your iMac's serial number.to get the appropriate discs. There will be around a $16 or $17 U.S. charge for discs.
    Since your iMac is still freezing, I now wonder if it is RAM and/or hard drive related.
    Your iMac maybe freezing because of serious lack of RAM.
    How full is your Mac's hard drive?
    You only have 1 GB of RAM installed.
    OS X 10.6 Snow Leopard really needs more RAM than this.
    Intel versions of OS X use more CPU, GPU, RAM and hard drive resources.
    OS X, running alone (without any other applications running) can use up between 2 and 4 GBs of RAM memory.
    Youf iMac model can 4 GBs of RAM, but only about 3.1 to 3.3 GBs of it will be recognized.
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    Without being able to run the Apple hardware test we have no way of knowing the condition of your iMac's hard drive.
    The freezing could, also, be caused from a failing hard drive.
    If you do not have any backup of your data, this is the time to create one.
    Backup your important data to either DVD discs, flash drive/s or purchase an external hard drive to backup all,of your data to.
    You can make an exact clone of the data, on your internal hard drive, using a data cloning like CarbonCopyCloner or SuperDuper. OR purchase the external drive and use OS X Time Machine to automatically backup your entire internal drive.

  • IMac Starts Up And Then Shuts Down ...

    Hi ...
    I'm hoping that someone out there can help me ...
    I purchased an Apple 24" iMac about 3 years ago ...
    It was pretty much working perfectly until 2 days ago ...
    The last time it was fully operational I'd just switched the computer on for the day - opened iTunes - and was using the FINDER to find approx 600 MP3s to add to iTunes ...
    Whilst the FINDER was searching for the MP3s the iMac froze ...
    So I decided to RESTART the computer by holding the POWER BUTTON to shut the computer down ...
    I gave the computer around 10 secs to shut down ...
    Then when I pressed the POWER BUTTON to START the iMac again it reached the grey screen with the Apple logo and the rotating dial ...
    The computer then started emitting an audible clicking sound as if it was searching for / organising data ...
    The sound eventually stopped but the iMac froze on the grey screen ...
    So again I decided to RESTART the computer by holding the POWER BUTTON to shut the computer down ...
    I gave the computer around 10 secs to shut down ...
    Then when I pressed the POWER BUTTON to START the iMac again it reached the grey screen with the Apple logo and the rotating dial ...
    And froze again ...
    I followed the instructions contained within the EVERYTHING MAC booklet ...
    I tried holding the OPTION key whilst starting up ...
    I tried holding down the COMMAND OPTION P and R keys to reset the PARAMETER RAM ...
    I also tried holding down the D key whilst starting up to test the Apple Hardware ...
    My iMac passed the Apple Hardware Test ...
    However every time I now try to start the iMac it reaches the grey screen (Apple logo / rotating dial) and then shuts down after approx 1 minute ...
    Is this simply a boot problem ? ...
    What alternatives do I have to boot up / correct the problem ? ...
    I'd be ever so grateful if someone out there could help walk me through alternative actions to take ...
    Kind regards ...

    Hello
    Try target disk mode see if your mac shut down from this way , to do that
    hold hon at start up "T" on key board just after startup sound until screen show a firewire logo as screen saver
    and wait ..
    if by chance you have a second mac you can use a fire wire cable to link it , in that way your mac is like an external hard drive , most easy way to recover data from it
    Try start in single user mode ,  use COMANDE - S at start up
    Try start in safe mode , use SHIFT key at start up
    if in all case you mac shut down after 1 or 2 min of use , certenly mean a mother board and or powersupply problem
    be sure to have perform SMC and PRAM reset at least 3 times each
    HTH
    Pierre

Maybe you are looking for