Video calls see screen but when call no ringing connection

Post transferred to merge with the author's first post on the Skype for Computer: Windows message board.

Pat, thanks for taking an interest in my issue. My display adapters listed in Device Manager are:
Intel HD Graphics Family - AMD v.8.882.2.3000
Radeon HD 7470M - AMD v.8.882.2.3000
This problem began about 2 months ago and prior to that all worked fine. I can also tell you that some video clips, like what is found on U-Tube, play fine with video displayed. So I am quite dumbfounded.
Regards,
Syl44

Similar Messages

My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore

I have iPhoto 09 The cover of my book is cropped is perfect on screen but when I print it out it's cropped badly. There is a red exclamation point on the screen image but I have created 5 books and never had this problem. HELP

I am using iPhoto 9 to make a book. The cover of my new book looks perfect on screen, but when print it out before I have it published the cropping is all off. There is also a red exclamation point on the cover image. I have checked and rechecked but to no avail. Can you help? Bill Perlmutter

That red exclamation point can mean either that the image on the cover is below the resolution limit that Apple has set for photos to make good prints or that there is missing text in a text box or there's some text that has overflowed the text box.
The resolution limit that is set in iPhoto for photos is 110 dpi, i.e. the PrintWarningImageDPI value in this screenshot of iPhoto's preference file:
Click to view full size
It's not an absolute thing. Many have reported getting books that had photos with the low resolution warning indicator and it was perfectly satisfactory.
But check to see if it's an image or text warning.
OT

I cannot pull up pictures from iphoto. I see them but when I click on them, I get an exclamation mark inside a triangle

I cannot open pictures from iphoto. I see them but when I click on them, I get this exclamation point inside a triangle

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

TS2646 Why is my video perfect in iMovies but when I try to share it in ANY mode it is jittery? Any info would be great. Thank you

Why is my video perfect in iMovies but when I try to share it in ANY mode it is jittery? Any info would be great. Thank you

Hi,
AcidSearch is causing the problems for you (and would most likely have been the cause of the problems with Safari 3 as well):
0x20eb000 - 0x20edfff net.culater.SIMBL 0.8.2 (8) /Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL
0x2528000 - 0x255cfff com.pozytron.AcidSearch ??? (0.7b4) /Library/Application Support/SIMBL/Plugins/AcidSearch.bundle/Contents/MacOS/AcidSearch
Delete the 2 folders highlighted above and then retry Safari.
Hope that helps.

Installed Photoshop Elements 13. Upon activation, get through sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. How do I validate. Checked account but product n

How do one validate Photoshop 13. (Windows 8) Upon activation, get through to sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. Checked account but product not listed. Installed with serial number that was sent by Adobe. Have attempted numerous times at different times of the day. On-line connection working.

Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
Bob

My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

Hi,
Time to take your iPod in for service.
You can make a Genius Bar reservation in advance if you are in the U.S.
http://www.apple.com/retail/geniusbar/
Carolyn

I am using Photoshop CS3 and the image looks ok on screen, but when I print the image is greenish.

I have checked with the printer's help desk and they say that this problem is not the printer, and there are no settings to change on the printer. Adobe no longer supports CS3. The immages look OK on screen, but when I print the page, the immage comes out kinda greenish, (more like, quite greenish). I don't know how to fix this problem or where to adjust any settings. Also to mention, the images are completed after a 2 day process, and this musst be done by Dec 22, 2011. Are there simple print options that will fix this problem?

You're getting into color management territory here and you need to target troubleshooting more specifically.
Basically you have a document profile that defines the colors. That profile is then converted (translated) into
1. A monitor profile for display, and
2. A printer/paper/ink profile for print.
If both profiles are good you'll get a reasonable match (allowing for the inherent differences between screen and paper).
If they don't match either could be wrong. So first off, is the monitor calibrated, or are you using the Windows default (sRGB), or a manufacturer provided profile?
Second, printer color management can be a bit obscure in that some manufacturers "hide" color management by doing it all under the hood and expecting sRGB input. Others, like Epson, allow you to pick the profile. This makes everything more transparent and makes troubleshooting much easier.
EDIT: cross post.

HT2688 Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help

Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help please

I also have this problem, as does everybody else I know who has tried to use the video in icloud. As the original poster says, they can be uploaded, but will only play on the device from which they were originally uploaded, appeaering only as images which display an endless buffering symbol when "played" on any other devices with which the photostream is shared.
Has anyone been able to get this to work? And if not, why is there no acknowledgement from Apple that this bug exists and will be addressed in an update (now running 7.0.2 and still no improvement)? It was, after all, advertised as one of the attractive new features of iOS 7. So why the stony silence?

I have problems to sync, my Ipod touch and my Iphone 6 in a port USB 3.0. I renewed my Lap top and when I connect any of those devices they stuck on the itunes screen, but when I return to my old lap-

I have problems to sync, my Ipod touch and my Iphone 6 in a port USB 3.0. I renewed my Lap top and when I connect any of those devices they stuck on the itunes screen, but when I return to my old lap…

Hello jose mariofromsan luis potosi,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are saying that your iOS devices are not showing up in iTunes on your Windows computer, you may find the troubleshooting steps outlined in the following article helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
On the other hand, if you are saying that your devices are only showing a Connect To iTunes icon screen, then this article may be more useful:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Hi I've reset my 2nd generation ipod touch. However,the connect to itunes graphic appears on the screen but when I attach to my powerbook it doesn, show up either in itune or finder.

Hi, I've reset my 2nd generation ipod touch. However,the connect to itunes graphic appears on the screen but when I attach to my powerbook it doesn't show up either in itunes or finder. I can't be the first to have experienced this problem. please could someone advise me.

What iOS do you have on the iPod?
Did it every connect to your computer with that iOS?
The latest iOD for the 2G is 4.2.1 and that required a Mac with 10.5.8 or later.
Have you tried:
- another USB port and cable
- iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

I am running OSX 10.8.3,when i try to open iDVD i get the initial screen but when i try to choose an option all i get is 'Downloading Themes' which just continues. I have left it for over an hour?

I am running OSX 10.8.3,when i try to open iDVD i get the initial screen but when i try to choose an option all i get is 'Downloading Themes' which just continues. I have left it for over an hour?

Where did you get iDVD to put on your Mac? The downloading themes are no longer available from Apple. If you copied it from a Mac that had all the themes look for the iDVD folder on that Mac which should be in the HD/Library/Applications Support folder or the Users/Home/Library/Applications Support folder. Copy it to the HD/Library/Applications Support folder for Mt Lion.
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Video calls see screen but when call no ringing connection

Similar Messages

Maybe you are looking for