Video camera with viewfinder

Hi,
we are looking for a video camera that still has a viewfinder besides the flip open lcd screen. We sometimes need to record video at night where the light coming from the screen would be too bright and compromising. We are looking for something with a build-in hard drive, and excellent night-shot capabilities. Any ideas would be appreciated.
Thanks

Hi us8424,
I am not aware of any consumer level camcorders that have
an optical viewfinder. This feature is exclusive to prosumer/professional model
camcorders that are currently on the market. We do sell the Sony HDR-FX1000
prosumer camcorder that has a viewfinder, but we are currently sold out of this
model.
I hope this helps!
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

How can i download video hdv minicassette footage from my sony video camera with no fire wire port?

How can I download video HDV minicassette footage from my sony video camera with no fire wire port?

Hi,
Are you talking about your computer which has no firewire port ? If YES you can have one of two options:
(a) Use FCI - Firewire card like this (preferred)
You can buy from this:
http://www.ebay.com.au/itm/2-Ports-PCI-Express-PCI-E-IEEE-1394A-Firewire-Adapter-Cable-Card-/1507023...
(b) You can also use USB-Firewaire adapter like this:
http://compare.ebay.com.au/like/120580625092?ltyp=AllFixedPriceItemTypes
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Setting up video camera with iDVD

I am very new to iDVD so please forgive me. I have read the manuals and what they don't tell you is how you go about linking up your video camera with your mac.
I have an old Mini DV JVC video camera (one of the first digital cameras available). Do I need to buy some sort of cable to link it to my iBook (as it only has audio and video cables and scart adpater). Also, do I need some extra software in order to import footage to my iBook from the mini DVs on my camera to allow me to use the files in iDVD?
Sorry if this is a stupid question but I no longer have my video camera handbook.

Sparkley,
Try going to JVC's website, and see if you can get a new manual.
Odds are you need a firewire cable, and many camcorders do not come with them. Most use a 4 pin to 6 pin firewire (also called 1394 or iLink) cable. Be sure NOT to get a USB cable, it won't work.
Check and see if there is a small port labeled "DV" on the JVC somewhere.
As long as your camera is "DV", you should need any other hardware (besides the cable) or software outside of iLife (iMovie/iDVD). I recommend that you use iMovie to start for importing - I'm not a fan of "OneStep" in iDVD.
Read this too:
http://docs.info.apple.com/article.html?artnum=165336
john

I can't sync the Not Afraid music video that I purchased this morning to my iPod Classic. It's frustrating because I have no issues syncing other videos and the rest of the album that this video came with synced just fine. Please help!

I can't sync the Not Afraid music video that I purchased this morning to my iPod Classic. It's frustrating because I have no issues syncing other videos and the rest of the album that this video came with synced just fine. Below is an image of what my screen looks like when I try to drag the video across to my iPod:
Please help!

You can only sync with one iTunes library. If you sync with another one the iPod will be erased and its contents replaced with what is in the library of the second computer.
However, you can manage music among multiple computers. See:
Using iPhone, iPad, or iPod with multiple computers
BTW you posted in the iPod touch forum

How do I use a Panasonic HDD Video Camera with an iBook?

We just bought a Panasonic SDR-H40P without even thinking that there would be any problem using it with a Mac. We recorded some videos, then proceeded to try and download them to the computer only to find that they are written in .mod, which the computer will not recognize. The software that comes with the camera is for PCs only. So, after doing some research, I downloaded the trial version of DropDV. and got the files off the camera via the provided USB. It did convert some of the files (supposedly into an iMovie format). Some of the videos we took work fine. Some are missing. Some seem to be in slow motion.
Is there a different program to use or another way to get these .mod (and .moi) files to work/open on our Mac? We have some videos of a baby that his grandparents would love to be able to see!

From what I've found through reading the topic in several digital movie
forums, you should be able to use iMovie and have it import the file
from the camera for use and editing in the Mac.
This path may be version dependent for best results; and I am not
sure which versions of iLife's iMovie would be best for use with the
digital camera and also may be compatible with the older Mac iBook.
Some Panasonic digital video cameras are also seen by iPhoto and
in some cases, that can find the movie file and import it for iMovie.
And there are other Panasonic video devices which create the same
kinds of files, and there is a free or shareware software out there to
help use them. This may include players by third parties and others
which may be able to edit digital movie files.
In some digital movie forums, there is an awareness of Panasonic
products not necessarily being the best supported for Mac OS X;
while many pro users of Panasonic products have Macs, among
them are newer Intel Mac users with Parallels, BootCamp, etc
and they can run XP or Vista-ready software. If this is (still) true,
then Panasonic may be missing out; since modern products
should have support in their retail box for both major platforms.
Some Panasonic products have shipped with Mac software for
several years now; along with Windows software. Some didn't.
Hopefully iMovie can see the Panasonic digital movie files; if the
iBook can support the feature set of iMovie. Some aspects of
this part of iLife require the ability to record to DVD media and
also may require more system assets & resources than you have.
Good luck & happy computing!

Using Video CAMERA with Connect pro

We reciently purchased this product and were told that it
would work with video cameras. We have a Panasonic that we are
using with vista. this camera works with Premiere Pro, and there is
nothing wrong with it. I know that Connect is not software based it
is an Internet Application. How ever i know that the OS (vista)
"sees" the camera because it works with other programs. Sorry i am
connecting with IEEE not USB
Has anyone out there in the world has success with getting a
video camera using IEEE connection to work fully. Audio and Video
coming through the camera?
Is anyon aware of drivers for either the camera or the IEEE?
And if the Connect product does not support this... WTF?
thanks

Connect does work with IEEE1394 Firewire Cams, just not with
all Firewire Cams. (USB cams also are not all working).
I would suggest to first try out the cam from different
machines with different OSs (Vista might well be the sole issue
here), also try if you can get an ordinary USB cam to work.
If all fails, you can workaround that using a virtual camera
driver, piping the firewire cam into the virtual cam and in Connect
you can load the virtual cam with the image of the Firewire cam.
Not a nice way round, but it would work.
If you google for "Adobe Connect camera compatibility matrix"
you get a "slightly" outdated list of supported cameras.

Can you use a Sony DCR-SR60E hard drive video camera with FC-Express?

Friend of mine in OZ has just bought this camera and I am trying to help her out from the UK! LOL. The camera only has USB and does NOT have firewire. Am I right in thinking that she is not going to be able to use this camera with Final Cut Express, or is there a way round this? The shop she bought it from is useless when it comes to support. Any help would be great. At the moment I have said she would be better off taking it back and changing it for a mini DV camera with firewire.
Powerbook 15 G4 Mac OS X (10.4.7)

You can't use the camera with FCE because it shoots in a format not supported by digital video systems on the Mac. FCE edits only DV or HDV material. This camera doesn't shoot one of those.

Remote control Sony video camera with Mac Mini?

Is it possible to connect an IR transmitter to a mac mini to be able to control a Sony camera from a remote location miles away? Specificaly, I want to be able to point my Sony IR remote control at my Mac Book Pro at home to control a video camera at work via the internet. Control features include focus, zoom, iris, White balance, etc. Is this possible? (The Sony camera comes with a remote control)

I never heard of such a device but there's a bunch of stuff in Google:
"Results 1 - 10 of about 611,000 for "long distance remote control."
Your best bet would probably be a telephone, with the person at the other end in the same room as the camera.

Most compatable video camera with iMovie 09 ?

Please help !
I love iMovie but was very disappointed using it with my Sony Handycam - apparently they did not speak to each other !! I used Steve Mullen's book and still didn't have any luck so I sold my camera ! Now I am hoping that Santa will bring me a new video camera and I need to tell him which is the best one for my needs. The JVC GZ-HD300 has been suggested and I have checked the compatibility on the Apple register and cannot even see it listed. I would like some true advice from real people please - any suggestions would be greatly appreciated. My main requirements in purchasing camera are recording in HD, HDD storage and memory card back up. Thanks

You have euro camcorders I don't know. Assuming the sr8 is our sr7 -- I havent heard anything bad. But, if you shoot where there is loud sounds the issues are:
1) is the mic itself overloaded?
2) does the mic overload the camcorder circuit before the gain control?
3) if the answers are NO, then IF one could adjust camcorder gain -- then that is the solution. But, if the either 1 or 2 is true, then being able to adjust gain will not help.
Seems like the Sony suffers from 1 or 2 because if it didn't you would have already adjusted the Sony gain -- or the Sony has no gain control.
If you want to keep using the Sony you might try an external mic.
Mic output levels typically range from –40dB to -60dBu. (Bigger negative values are softer than smaller negative values.) You want a mic with less output than the built-in Sony mic. But, since you don't have its spec., it's hard to shop for a different one.
That leaves trial and error, or trying out different camcorders. Since you know at least one Canon camcorder works, I would start with Canon. I'd look for one with an external mic input AND an adjustable level. If not a level control -- a menu item to switch in "attenuation."
PS1: check if your Sony has a menu item to switch in "attenuation."
PS2: This is a wonderful example of how in 90% of the talk about camcorders, audio is never mentioned. Yet, if you talk with pros they spend more $ on mics -- often buying several -- than they do on their camcorder. In the situations you shoot at -- audio is more of a worry than video. You are recording VERY loud sounds that can overload anything but a really good mic. (Or, if the mic works -- it may out out a bigger signal than a camcorder can accept.) Which makes me wonder about buying a mic mixer and some good mics rather than a new camcorder. This would be a one time investment. In fact, you could also buy one of these stereo mic-mixer-digital recorders. Record to SD card AND pass a signal to one camcorder. It also opens the door to recording bands. Just a passing thought.

How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?

How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?

Hi
This Camera has three types of ports.
- Analog-out
- USB
- I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
And Your Camera only can send Photos via the USB-connection - NO VIDEO.
So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
There are no real way around this.
Yours Bengt W

Digital Video Camera with USB connection

If anyone can help me please let me know. I own a Sony Digital Video Camera that's 3 years old. It connects to my iMAC through a USB port. I can not figure out how to load my videos to iMovie. Is this camera too old? When I connect the USB port nothing happens; nothing appears on my desktop.

George,
i'm not sure if you can download Image Capture from the Apple Website separately or if it comes as a total download of a specific version of OSX. If you have the original system discs that came with your computer, maybe that would have it, or worst case, an option to "Restore Software." Since you camera records to a DVD, you have another option: Do a Google search for MPEG Streamclip and download it (free). Basically, MPEG Streamclip will convert the files on the DVD back to DV files for editing in iMovie. I don't have any first-hand experience with a DVD camera, so you might also need to download Apple's MPEG-2 Playback Component ($20 from Apple's site) if the video on your DVDs is in MPEG-2 format. Come to think of it, I downloaded some MPEG movies from my digital still camera (it takes simple movies) using Image Capture and I still needed to use both MPEG Streamclip and the Apple Component to get it into iMovie, so maybe skip Image Capture and go for these two programs. I know it should be easier to do than this, but unfortunately getting video back off of a DVD is not what Apple wanted you to do. They setup their movie edit programs to accept DV files. The movies on a DVD are already highly compressed, so you actually need to reverse the process and get these compressed movies back to DV. Most PC computers allow, and even suggest, that you import MPEG movies for editing, but that is toally backwards. That explains why the PC discussion boards are filled with toally frustrated and confused people. Most PC computers still don't come with Firewire. They just don't get it.

Using a Panasonic HC-V500M video camera with an iMac?

Does Imovie 08 (7.1.4) support a Panasonic HC-V500M video camera? Have been able to transfer movie to Imac with Imovie '08 but audio doesn't transfer. Why? What should I do to get audio?

From what I've found through reading the topic in several digital movie
forums, you should be able to use iMovie and have it import the file
from the camera for use and editing in the Mac.
This path may be version dependent for best results; and I am not
sure which versions of iLife's iMovie would be best for use with the
digital camera and also may be compatible with the older Mac iBook.
Some Panasonic digital video cameras are also seen by iPhoto and
in some cases, that can find the movie file and import it for iMovie.
And there are other Panasonic video devices which create the same
kinds of files, and there is a free or shareware software out there to
help use them. This may include players by third parties and others
which may be able to edit digital movie files.
In some digital movie forums, there is an awareness of Panasonic
products not necessarily being the best supported for Mac OS X;
while many pro users of Panasonic products have Macs, among
them are newer Intel Mac users with Parallels, BootCamp, etc
and they can run XP or Vista-ready software. If this is (still) true,
then Panasonic may be missing out; since modern products
should have support in their retail box for both major platforms.
Some Panasonic products have shipped with Mac software for
several years now; along with Windows software. Some didn't.
Hopefully iMovie can see the Panasonic digital movie files; if the
iBook can support the feature set of iMovie. Some aspects of
this part of iLife require the ability to record to DVD media and
also may require more system assets & resources than you have.
Good luck & happy computing!

Using a Flip video camera with Final Cut Express

I've just recently bought one of those flip video cameras (http://www.theflip.com) which is great, but I can't seem to get the footage imported into Final Cut Express without it then needing to be rendered when I place it on the timeline.
Does anyone have experience using this camera with FCE, and if so, which settings did you use please? I've tried tweaking most of them with little success.
Thanks!

Hi Simon,
in addition to Martin's instructions I suggest you to make sure, in MPEG Streamclip:
- you actually select Export to QuickTime (not Export to DV)
- you set the right frame rate (frequency), that is 29,97 for NTSC.
Personally I usually set Interlaced Scaling checked, and Deinterlace Video unchecked, but I'm not sure these are the right settings in your case.
With the above settings you should be able to import the resulting video into FCE without requiring any initial rendering, if the FCE Easy Setup is DV-NTSC.
Warning: I use MPEG Streamclip 1.8 (the latest as fa as I know) where the Frequency parameter is in the Export main window.
Piero
Message was edited by: PieroF

Compatible video camera with imovie

Does anyone know what video camera are or are not compatible with imovie. I looking at purchases a new Sony HDD(hard drive) video recorder but read that some are not compatible with imovie. I have a mac book.

iMovie 7 allows over 100 more camera file formats and connections than any previous version.
Most hard drive storage cameras record to MPEG-2 format which is now supported in version 7.

Photobooth and Isight Video camera with slash through it. Need help. Thx

I have a slash through my video camera and cannot use photobooth for either video or still photos. How can I correct this? Thanks.

By doing a search in this forum for problems similar to yours. There you will find plenty of solutions to try out as well as in the following Article:
http://support.apple.com/kb/HT2090 How to Troubleshoot iSight

Video camera with viewfinder

Similar Messages

Maybe you are looking for