Video camera won't work

I try to change from photo to video but it will not allow me to select video.

Are you tapping video or are you swiping to video? In IOS 7 you have to swipe to video and it will turn yellow and you'll see the red button to record.

Similar Messages

Video camera for greenscreen work +

Hi. I'm going to be setting up an in-home studio for a weekly, 1 hour show (to be viewed on the internet, not sure if could ever get it onto public access stations but might like the option).
The studio will be 20' long by 16' wide (probably minus a carveout for a bathroom) - but will retain a 20' length for filming.
For noise control, planning to hang heavy black curtains on the sides and camera end, add some carpeting, and possibly some simple / inexpensive treatment on ceiling as well. Will either paint back wall green or get some chromakey material to shoot against. WIll have a desk with 1-4 people for the show, positioned 6-8 feet from the greenscreen, and the camera on the other end (roughly 12 feet away)
I'm trying to keep the cost as low as possible, but would like it to be a step up from my $200ish consumer camcorders (a JVC Everio and a Canon HV20), so I've been looking at some used Prosumer or Professional Video Cameras that would allow me to capture the 4:2:2 colorspace I want to do for improved Chroma Keys. (I have Adobe Master Suite CS6 and will be doing my work in After Effects and Premiere)
We have a Sony DSLR A200 which came with a couple of lenses, but don't have any additional lenses beyond that (or much camera experience - so all sugestions welcome).
Cameras I've considered include
Sony HVR-V1U which I can get locally for about $1000 or less; one just sold on Ebay for $800ish - I'm a bit reluctant to make that big of a purchase there, but might consider it if a well established seller / store - B&H suggested this camera didn't give you 'true' 4:2:2 colorspace via HDMI; Sony said it did give you the colorspace, what was lacking in these earlier models (or hmdi ports maybe) was ability to transmit full intensity data (for brightness)
Think I might need to buy an HDMI Capturing device to get the 4:2:2 signal - Atomos Ninja 2 runs just under $700, lets you record directly to Hard Drives so fairly inexpensive option for massive storage; Have also seen a variety of products from Blackmagic (Intensity Pro - and Hyperdeck Shuttle - ranging from $150ish-$350ish)
Canon XF100 is newer, seems to be a superior camera. Records onto generic Compact Flash cards (which could help limit expense and make for easy editing); and meets 'broadcast standards' of 50Mbps at full HD, and might not need external HDMI capture - saw these at B&H for between $2000 used, $2500 new; Currently listed for $2100 at 42nd Street Photo.com - which looks legitimate as best I can tell.
Heard BlackMagic Pocket Cinema Camera mentioned as well - much cheaper, roughly $1000 for new - but seemed like those might need a variety ofa dd o (dont know if compatible with my Sony lenses) - and require fast (expensive) SD cards
Would welcome any advice about good video camera for greenscreen work - along with any experience on the Atomos Ninja 2 or Blackmagic products retailed above (and any tidbits on setting up audio/video studio; will be recording some music in there as well)
Thanks

It's a trade-off ... which is to say, it's like Life in general, right?
That many people that close-in is gonna be awful tight. Two people, ok ... three pushing it ... four is gonna work you some. Getting talent any farther away from the background given the limited distance the camera can move is not likely, without getting too wide a view from the cam exposing off-screen areas.
As to the screen blending into the floor ... you can affix the front edge out from the wall such as to get a curved shape that can visually blend wall into floor, you need a good two-feet radius to pull it off though. And if someone steps back, um ... yea, screens and photog's background paper can easily get a fresh new hole in them.
The "cove" backdrop support is a common commercial photographers tool ... needs to have at least a two-foot radius to be able to blend it visually from floor into wall. Often made by cutting 1/4" ply into 4-foot squares, then drawing a circle on them with a 2-foot radius, cutting out with a jig saw ... resulting in four corner sections that will be used for building the cove itself. Each with that radius of a circle cut out of it. Screw some small wood blocks onto the straight sides, using these blocks to fasten the cove-form sections to the wall and floor, then maybe three blocks flush with the edges of the cove one in the middle of the arc, then equidistant each side from there. Measure from an inch or two off the cove form onto the floor up flush with the bend of the cove and an inch or two past the cove-form up the wall. Cut a strip of 1/4" ply or masonry board or whatnot (some short of thin bendable but tough sheet good) that fits this dimension, push them tight to the form and screw through the sheets into the woodblocks on the cove forms.
Then your screen material can just drap over it and you won't step through it. We built one for our studio, it's 12 foot wide, works great ... and put two layers of 1/4" ply over it, the first stopping just at the edge of the cove form, the other going past that another inche and a half or so.

My Ipod 4th generations Camera won't work, how do I fix it?

My Ipod 4th generations Camera won't work, how do I fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Front face camera won't work for pictures. But it works perfectly on FaceTime, any way of fixing this?

Front face camera won't work for pictures. But it works perfectly on FaceTime, any way of fixing this?
When I try and change the camera to face front it acts like it's going to change then kind of freezes and won't let me change back to the back camera for several minutes.
Any ways of fixing this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Camera won't work. Newbie here.

Hi guys I have just joined this forum and I wonder if you could help sort out my camera that say's .. "Could not start the camera. Close other applications and try opening the camera again."
I've already tried wiping all my applications on Blackberry Curve 8520 still the same. Then I tried, putting my fone on safe mode same same. Then lastly I tried the 'Alt key + lglg" to see the event logs after I choose 'Clear Logs' and this what entails..
Min Log Level is in 'Warning'
a System - JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03 and when I clicked this..
Name: System
Severity: Always Logged
GUID: 97c9f5f641d25e5f
Time: Nov 14, 2013 12;28:07
JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03
Next is ..
W System - Overlay released (deleted) at index: 5
Name: System
Severity: Warning
GUID: 97c9f5f641d25e5f
Time: Nov 14, 2013 12;27:53
Overlay released (deleted) at index: 5
w System - New overlay at index:5
Name: System
Severity: Warning
GUID: 97c9f5f641d25e5f
Time: Nov 14, 2013 12;27:53
New overlay at index: 5
W System - PMEU 1037
Name: System
Severity: Warning
GUID: 97c9f5f641d25e5f
Time: Nov 14, 2013 12;27:53
PMEU 1037
a net.rim.memclean - FrmF
Name: net.rim.memclean
Severity: Always Logged
GUID: cb039f26e560f62d
Time: Nov 14, 2013 12;27:53
FrmF
a net.rim.memclean - FrmF
Name: net.rim.memclean
Severity: Always Logged
GUID: cb039f26e560f62d
Time: Nov 14, 2013 12;27:53
a System - JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03
Name: System
Severity: Always Logged
GUID: 97c9f5f641d25e5f
Time: Nov 14, 2013 12;28:07
JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03
All of these are on my event logs and still my cam won't work. Please help me with this.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After last update, flash won't run, camera won't work, slow slow slow!

After the recent update, my camera won't work, can't do facetime or video in ichat. Also shockwave and silverlight plug ins won't work so can't watch youtube or netflix. On reboot my laptop is EXTREMELY Slow!
help?

Hi hadleyoil, and a warm welcome to the forums!
Thanks for the report(s).
That is generally the best cure, just be sure to Repair Permissions before & after any update!
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.

Icon of camera won't work to send pic with text

icon of camera won't work to send pic with text

Howdy Mitzymom,
Welcome to Apple Support Communities.
It sounds like there is an issue sending texts with photos from the Messages app on your iPhone. If the issue only occurs in when tapping the icon in the Messages app, not when texting pictures from other apps like the photo app, try the general app troubleshooting suggestions below on the Messages app.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
If the issue occurs when trying to send texts with photos from any app, try the MMS and iMessage troubleshooting suggestions here:
iOS: Troubleshooting Messages - Apple Support
Take care,
-Jason

FaceTime Video camera is not working

after updating my OS in Macbook Air, my Video camera is not working. pls suggest me about how to fix that and make video working.

If restarting Mac does not fix, see How to Troubleshoot iSight - Apple Support.
If needed, you could also try Reinstalling OS X.
Message was edited by: EZ Jim
Mac OSX 10.10.1

My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

My camera won't work on my Iphone 5

My camera won't work! It comes up with a black sceen/ closed shutter! I've forced closed it, restarted my phone but nothing is working! I use my camera daily so this is a huge issue!
Could someone please help me solve this problem!?
Thanks

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Torch won't turn off and back camera won't work after dropping it in a pool. What can I do?

I put it in rice as soon as I got back, and left it for 36 hours as instructed by a website and friends. Ever since dropping it the torch hasn't turned off and the bac camera won't work.

Water and electronics do not mix well. Your device may not ever work properly again, and probably needs to be replaced. Unless you have the AppleCare Protection Plan Plus, then it will cost $199 USD to replace an iPhone 4S.
The rice trick works best if you leave it for at least 4-5 days, not 1.5 days. But even that is no guarantee.

Which Sony Video Camera's will work with Final Cut

Hi,
I'm getting *Final Cut* and can get +Sony Video Camera's+ at a discount, but like to know which +Sony Video Camera's+ will work with *Final Cut* or should most work without any problems?
Thanks,
Sal

You got to do better than that.
Any idea on the TYPE of sony video camera's available to you? They make quite a few.
I'd stay away from anything with a DVD in it... also HDV can be tricky too... but not undoable.
What are you looking for?
CaptM

Html5 video player won't work with slider script??

Hi - I'm new to html5 and Dreamweaver, but I've worked with html in the past, so most things aspects aren't foreign to me.
My question is this: I'm working with an existing html5 template and it had a slider graphics bar near the top. It works fine and scrolls through three pre-made banners.
The problem is I just added the widget for HTML5 Videoplayer and inserted it into my code. The video box, etc. shows up fine, and will play, but now the slider graphic box at the top doesn't work anymore. Instead it just displays all three banners as images, one on top of the other.
When I look closer at the script code that the widget embeds, it seems as though the script widget code is not playing well with the existing script code. When I remove the script code that the widget installs, the slider works perfectly again (but the video obviously won't play).
The exact code is included below. My question is, how can I make the two of these scripts work together???Any help would be great appreciated. Thanks, Blair
<script src="scripts/elegant-press.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/jquery-1.4.2.min.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/mwEmbed-player-static.js" type="text/javascript"></script>

<link href="kaltura-html5player-widget/mwEmbed-player-static.css" rel="stylesheet" type="text/css">
<style type="text/css">
/* BeginOAWidget_Instance_2294029: #kalturaPlayer */
@import url("http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/themes/redmond/jquery-ui.css");
/* EndOAWidget_Instance_2294029 */
</style>
<script type="text/xml">

</script>

Hi - I'm new to html5 and Dreamweaver, but I've worked with html in the past, so most things aspects aren't foreign to me.
My question is this: I'm working with an existing html5 template and it had a slider graphics bar near the top. It works fine and scrolls through three pre-made banners.
The problem is I just added the widget for HTML5 Videoplayer and inserted it into my code. The video box, etc. shows up fine, and will play, but now the slider graphic box at the top doesn't work anymore. Instead it just displays all three banners as images, one on top of the other.
When I look closer at the script code that the widget embeds, it seems as though the script widget code is not playing well with the existing script code. When I remove the script code that the widget installs, the slider works perfectly again (but the video obviously won't play).
The exact code is included below. My question is, how can I make the two of these scripts work together???Any help would be great appreciated. Thanks, Blair
<script src="scripts/elegant-press.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/jquery-1.4.2.min.js" type="text/javascript"></script>
<script src="kaltura-html5player-widget/mwEmbed-player-static.js" type="text/javascript"></script>

<link href="kaltura-html5player-widget/mwEmbed-player-static.css" rel="stylesheet" type="text/css">
<style type="text/css">
/* BeginOAWidget_Instance_2294029: #kalturaPlayer */
@import url("http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/themes/redmond/jquery-ui.css");
/* EndOAWidget_Instance_2294029 */
</style>
<script type="text/xml">

</script>

Video/Camera light not working after upgrade to 975

Hi,
After I upgraded to the latest OS release from Verizon (v5.0.0.975) on my Tour, the light for both my video recorder or camera no longer work. I have done battery pulls and checked the options for each (both set to ON).
I tried searching here first, but didn't find anything. However, a Google search shows posts on other forums about this issue.
I contacted Verizon Support and the person was not able to help. She asked me to go into Options for my video camera and apparently some of the settings have also been removed. So, I asked her to please report this to RIM Support. She mentioned downgrading my OS, which I had already considered. But, since this OS seems stable and I don't use my cameras that much, I'll ride it out for now.
If anyone else is having the same problem, I would encourage you to contact your carriers support and report this. Hopefully RIM will have a fix for this available soon.
Thanks,
RayK

Try the troubleshooting tips here > How to Troubleshoot iSight
iSight is the built in camera.

Built in Video Camera or USB Video Camera Have Stopped Working

Both the built in video camera as well as the USB plug camera have both stopped working and I cannot figure out why. Of course I am a computer illiterate so that doesn't help.
kaskade aka Gene

@kaskadeb
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Video camera won't work

Similar Messages

Maybe you are looking for