Video cameras no longer connecting to Final Cut Express

I have two video cameras (Sony TRV-25 and Sony HDV-A1U) which are no longer connecting to Final Cut Express through the firewire (4-pin to 800). I get the "unable to initialize" message. What's weird is that they were working fine just last month.
I'm on a relative new iMac, running 10.6, FCE 4.
I've double and triple-checked the settings on the cameras (i.e., HDV and iLink output settings), and I've selected the appropriate settings in Easy Setup in FCE (1060i60 for the HDV, NTSC-DV for the TRV).
I also reset video devices under the View menu.
Just for kicks, I tried connecting the TRV-25 to my old Mac. I had no problems at all. [The old Mac won't work with the HDV camera, so I didn't bother trying that.]
There are no other firewire devices connected to the Mac. There is an external drive that I use for capturing the video files that is attached through one of the USB ports.
I went and bought another firewire cable just to make sure, but got the same results.
For what it's worth, I also could not get the cameras to be recognized in iMovie.
Is there anything else I should try?
Thanks!

When I looked in System Profiler and click on the firewire line, it just said something about maximum speed 800 MB per second or whatever. Should it actually have the camera listed there? Is that the right way to check?
The firewire is 4-pin (iLink) to 800, and there are no other devices connected.

Similar Messages

Interfacing Video Camera to Mac Pro for Final Cut Express HD Use

I have a lot of Video8 tapes that were made on my Sony DCR-TRV310 that I want to move to my Mac Pro and edit with Final Cut Express HD. The Sony camera only has the three (R,Y,W) output ports and my Mac Pro only has firewire input ports. Does anyone know of a cord solution or do I have to use an additional interface. Thanks

Hello,
Unfortunately there is no "cable solution" You will need an external interface. Something along the lines of an external tv tuner. Elgato Systems makes a few, i've had great success with the Hauppage WinTV PVR USB2 Tuner. This cost me about 150$ Canadian and is compatible with Mac's after a software download from the manufacturer's website.

Which Sony Video Camera's will work with Final Cut

Hi,
I'm getting *Final Cut* and can get +Sony Video Camera's+ at a discount, but like to know which +Sony Video Camera's+ will work with *Final Cut* or should most work without any problems?
Thanks,
Sal

You got to do better than that.
Any idea on the TYPE of sony video camera's available to you? They make quite a few.
I'd stay away from anything with a DVD in it... also HDV can be tricky too... but not undoable.
What are you looking for?
CaptM

How do I add a title to a video clip w/ LiveType 2 and Final Cut Express 4

I have Final Cut Express 4 & LiveType 2.1.4, I'm not sure how to add titles or test to a video clip, and the tutorials for Final Cut Express 4 don't say how to get started in LiveType. How do I simply add text? The tutorials say how to add effects to the text they just don't say how to add it to the clip or how to get the clip into LiveType.

Well, you don't actually _add text_ to a video clip, you _create a text clip_ and add that clip to your timeline, either adjacent to an existing clip or on the next higher track if you want to layer the text with an existing video clip.
The very simplest way to add text is to use one of the *text generators* built into FCE. Lower Third, Text, Scrolling Text, etc. allow you to create various text clips and give you basic controls over fonts, positioning, size, color, etc. You can find the text generators in the Effects tab in the FCE Browser.
LiveType is a separate and more sophisticated application that enables you to do all sorts of things with text (much more than can be done with the FCE text generators). The basic process is - create your title in a LiveType project. Save the LiveType project. Then in FCE, import the LiveType project; from there, you can treat it just the same as any other clip.

Capturing video from Sony DCR-SR32E to Final Cut express

I have a Sony DCR-SR32E camcorder and visited the Genius Bar recently, it appears it's one of the few camcorders not supported in iMovie and was told by the genius that I needed to ask Sony for an mpeg-2 codex.
Sony re-directed me to search for one on the internet and could be of no further assistance. Can anyone recommend an mpeg2 codec that will convert modd or mpg files so that I can use the Final Cut I purchased or if not that at least iMovie.
Unfortunately I seem to have a MAC, that I bought specifically for editing video, that can't handle the Sony files and a Sony Camcorder that I can't use as the HD is full

This forum is the Final cut express forum so it's best to post in the iMovie forum for iMovie stuff.
Even if you are using FCE the files from this camera will not work directly.
You will require a transcode to Quicktime using an application like Mpeg Streamclip.
You may have to purchase the Apple Mpeg viewing software as well to minoitor the video if required.
Al

Importing video from Sony HDR-SR12 to Final Cut Express 4.0

I have an iMac (iMAC5,1), Intel core 2 duo, 2 GHz processor speed and 1 Gb memory. I have a new Sony HDR-SR12 camcorder. I attempted to import the video to my iMovie 07, but was unsuccessful. I also attempted to import this video to my Final Cut Express 4.0 but had no luck either. I have no trouble importing my photos from the camcorder to PC, why such an issue with the video? Is there something I can do? I have heard that HD video is not compatible with iMovie 07, but shouldn't it work with Final Cut Express 4.0 or is it my iMac hardware?

In short, none of the above.
iMovie '07 and FCE4 are both compatible with HD video, and so is your iMac. If you would like us to help, it would be nice to know your workflow. How are you attempting within FCE to import the footage? Provide us some details here to work with and maybe we can be of more help.

Applying video filters to multiple clips in Final Cut Express HD

Is there a way to select multiple video clips and add a video filter to all of them? Example: we have a movie that was recorded in 2 different widescreen aspects ratios. Can I change them to the same aspect ratio easily?

I can't say for FCE, you may want to post in that forum. But in FCP, the method for applying filter(s) to multiple clips is to apply the filter to one clip then make the needed adjustments on the filter(s) in that clip. Next, right-click on that clip and select "Copy" from the contextual menu. Next, select all of the other clips to which you want to apply the same filter(s) and settings. Right-click on one of them and choose "Paste Attributes" from the contextual menu. When the Attributes window opens, choose Filters, then click OK.
To apply the same filter to several clips (without settings) at the same time, select the clips in the Timeline, then drag the filter(s) from the Browser to the clips.
-DH

Why has my Sony XR520 stopped connecting to Final Cut Express

The Sony XR520 used in the office mounts on the Mac Pro with FCX, but the software fails to see it. the upshot is I can't log and transfer from the camera

If you have shot p (prgressive footage) it won't see it. eg. 1920;1440 x 1080p
Interlaced will work directly in FCE.
Al

Transferring videos into final cut express

Hello! I am new with mac, so...
In order to transfer videos from a HDD camcorder into final cut express or imovie, can I only do it through a fire wire cable? or does a simple usb do?
And, do all HDD camcorders do? I bought a Sony HDR-SR10E but I returned it because I couldn't figure out a way to import stuff....
Does anyone know a camcorder that will definitely do with FCE?
Thank you very much in advance!

As you can see from Zak's list, the only cameras apart from DV and HDV tape cameras that can be used with FCE 4 are those shooting AVCHD.
All other cameras will not work properly as you will have to convert their formats to DV using something like Streamclip.

Final Cut Express ignoring my camera!

Hello folks. I've been using a Canon Vixia HF10 for the last 7 months with my Final Cut Express. I just plug the camera in, set it to "Video Play," turn it on, and Final Cut Express recognizes it and begins filling up the clip queue.
Earlier this week I did some organizing of my desktop and decided to install a few updates I'd been lagging behind on. I don't even know if one of them was a FCE update or not, but now all of a sudden Final Cut Express just will not recognize the camera at all. Neither will iMovie. It's particularly frustrating because I can see that the camera is plugged in on the desktop, and can even play the files that are still on the camera via my VLC media player. I am fairly certain it's not the hardware causing the issue, but I can't figure out how to get FCE to pick it up via log and transfer!
I tried clearing the cache and setting the preferences to Plain Stereo as per the suggestions of some other threads, but like I said the program is just not picking it up at all.

Well, when I click Add Folder in the Log and Transfer pane, this is what I see:
http://loonybob.homestead.com/files/Picture_1.png
I can see the Canon drive, its several subfolders, and even the raw .MTS format video clips waiting to be edited. When I try to click "Open" on the drive, any of its subfolders, or a clip itself it says ""STREAM" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media." Thus leaving me with no way to import my clips.
This is really boggling my mind considering it has worked just fine for the past 7 months.

Canon HV20 Compatibility with Final Cut Express

I cannot get the latest version of Final Cut Express to work with my new Canon HV20 video camera. I can get the video into iMovie 08, but nothing I try can get Final Cut Express to recognize the camera. I cannot import the imovie file either. It gives me an error. I can drag the video from the Hard Disk to Final Cut Express to import it, but that is cumbersome.

Start here:
http://www.fcpbook.com/Video10.html
Then come back and do this:
Please give your full system specifications, what computer, what drives, what camera or deck, how everything's connected, what settings are on the media, what settings you're using in FCE, and finally what version of the software, of the OS, and of QT are you using?

Thinking about Final Cut Express

I am planning on getting an HD camcorder further down the line. For now all I have is my digital camera that records video. My question is, can Final Cut Express 4 work with .mpg and .mov files? And if I get FC4, is there any reason to still use iMovie? In other words, can FC4 do everything iMovie '09 can and more?

in addition ..
I was an iM enthusiast since vers2..
now, I'm a switcher - I like the options and control FCE offers, allthough the '1 click only' attitude of iM is still seductive
example: Ken Burns.
reading this (=the FCE) board, we frequently see posts asking for plug-ins etc to add the convenience of KB as in iM (two frame handles, done).
you have to understand the concept of keyframing and timelines and xyz-coordinates to create a KB effect in FCE - seems to be complicated, but offers you much more than iM ever did, incl. a simple zoom-to/from-zil ..
perhaps, you miss 'Themes' in the beginning.. after a while, you produce your own 'Themes' in FCE!

Does the DCR-SR62 30GB Sony Handycam work with Final Cut Express hd 3.5?

Hi,
I am a new mac user and I want to get a good camera that will work with Final Cut Express hd, I am currently looking at the DCR-SR62 30GB and the HDR-UX1 dvd both by sony and I would like to know if these to cameras or one of them will work with Final Cut Express Hd. Thanks.

Niether one of these cams are the best choice for FCE. FC can not directly work with either DVD or HD (as in Hard drive) camcorders. You will have to convert and/or rip the output of either camera, giving you an extra work step and perhaps diminishing the quality of your footage
FCE is designed to work with DV/HDV material ... from a tape, throught a Firewire connection
There is software like MPEG Streamclip which will allow you to convert those cam's output to work with FC but if you haven't bought them yet, I would hold off and look at a good quality tape based cam

Optura 600 w Final Cut Express HD

Has anyone been able to make it work? I can use the camera fine with iMovie but Final Cut Express won't take it. At this point I feel like I need to get a new camera.

I have MVX4i that is the PAL version of the Optura 600.
It works very well, and I tried many different connections with FCE 3.5.1: capturing, playback, A/D and D/A conversion. So probably your problem has to do with FCE settings, not with the camcorder.
Piero

Exporting HDV from Final Cut Express

I'm trying to export a video as an mpeg-2 from Final Cut Express and burn it onto a CD-ROM for use on a PC with Adobe Premier. Could anyone help on the best way to do so?

There is no MPEG-2 export from FCE unless you have a third party encoder. You might try googling it. There are some expensive ones. Why does it have to be MPEG-2 BTW? Wouldn't QuickTime be better? It's fully support by Premiere on both platforms.

Video cameras no longer connecting to Final Cut Express

Similar Messages

Maybe you are looking for