Video capture add-on problem

Background: hardware- newly built computer- Celeron D 3.33GHz, Windows 7 64 bit (legal purchase)
software: Mozilla Firefox 27.0.1 downloaded from Mozilla, installer file=Firefox Setup Stub 27.0.1
Problem:
Firefox operates fine until I install a video capture add-on like Easy Youtube Video Downloader or Youtube and More-Easy Video Downloader from the Mozilla site.
Once one of these are installed I get lots of windows popping open everytime I go near a site with videos. One window's URL started with jsf.jsticket.net..... and asks to download some software. Multiple windows have opened with all sort of software download/install links.
I have uninstalled Firefox using RevoUninstaller and tried installing again using a freshly downloaded Firefox installer. When I put in one of these add-ons things go bad again.
I have run a security sweep in Safe Mode-proceedure outlined at http://securitytango.com/windows.php
software run in Safe Mode not attached to internet:
Rkill
Unhide
TDSSKiller
Stinger
SuperAntiSpyware (update it first)
Malwarebytes' Anti-Malware (update it first)
antivirus program (update it first)
There was now virus or malware detected.
I'm going a bit crazy because I have another machine running with Windows 7 & Firefox 27.0.1 with Youtube and More-Easy Video Downloader 1.97.25 and it works just fine.
Can anyone suggest a solution to this problem. Any help will be greatly appreciated.
Dave

We can't check if you have any malicious extensions without a list (this information is normally provided by the Troubleshooter add-on, which you declined to install).
# Type ''about:support'' into the address bar and press Enter.
# Copy the entire Extensions category to the clipboard.
# Paste the clipboard contents into a reply here.
''dottney wrote:''
Firefox operates fine until I install a video capture add-on like Easy Youtube Video Downloader or Youtube and More-Easy Video Downloader from the Mozilla site.
Are you referring to the following two add-ons from the Firefox Add-ons site? They've both been fully reviewed and have user bases numbering in the hundreds of thousands. The odds of either containing malware should be slim to none.
* https://addons.mozilla.org/firefox/addon/easy-youtube-video-download/
* https://addons.mozilla.org/firefox/addon/video-downloader-pure/

Similar Messages

Video Capture Overlay/Preview Problem

I'm trying to understand what's going on with my capture card, Geforce4 MX-440 VTD8X.
Latest Nvidia VGA Drivers and WDM driver v1.27
Windows XP SP1, DirectX 9.0b
I run Virtualdub (Virtual VCR does the same) and choose the format to use. UYVY is my only option (is this normal?) and I choose 640x480.
On the screen Overlay looks great, everything seems fine. When I actually start recording, or choose Preview instead of Overlay it's a completely different story. The entire screen is just a mess of fuzzy lines and distortion.
***Update***
Fixed.
Used the DirectX removal tool and reinstalled 9.0a

We can't check if you have any malicious extensions without a list (this information is normally provided by the Troubleshooter add-on, which you declined to install).
# Type ''about:support'' into the address bar and press Enter.
# Copy the entire Extensions category to the clipboard.
# Paste the clipboard contents into a reply here.
''dottney wrote:''
Firefox operates fine until I install a video capture add-on like Easy Youtube Video Downloader or Youtube and More-Easy Video Downloader from the Mozilla site.
Are you referring to the following two add-ons from the Firefox Add-ons site? They've both been fully reviewed and have user bases numbering in the hundreds of thousands. The odds of either containing malware should be slim to none.
* https://addons.mozilla.org/firefox/addon/easy-youtube-video-download/
* https://addons.mozilla.org/firefox/addon/video-downloader-pure/

Voice Controled Video Capture 2 Microphone Problem

I am trying to use AppleScript to do a few video capture functions by
voice control and I have hit a stumbling block where I don't think that
I can have 2 mics open at the same time.
I have the voice control part working and I can get BTV Pro to turn on
the camera and start recording but when I do it cuts the mic for the
voice control aspect.
I am using an iSight for the video capture and a USB headphone with mic
for the voice control and status feedback.
Is there any way to keep both mics active? Allowing the voice recognition server to
listen to the USB mic and the video recrding app to listen to the iSight mic.
I have a copy of the script here:
http://www.artificially-intelligent.com/road2rio/applescript/vci.btv.applescript
Any input would be greatly appreciated.
Dave Waller
Monroe WI
iMac Mac OS X (10.4.4) iSight, QuickTime Pro, Final Cut Express
iMac Mac OS X (10.4.4) iSight, QuickTime Pro, Final Cut Express
iMac Mac OS X (10.4.4) iSight, QuickTime Pro, Final Cut Express
iMac Mac OS X (10.4.4) iSight & USB microphone

Thank you for a very comprehensive post.
The usual suspects in this situation are:
- Capture now caught in an endless loop allocating disk space
or
- Firewire bus problems
or
-Quicktime install issues
Capture Now: You have taken a good step is setting a limit in capture now. Often that is all it takes if there are no other issues.
Firewire Bus Problems: Canon cameras are notorious for their weak implementation of the firewire control protocol and do not play well with other devices (aka hard drives) on the same firewire bus.
To test for firewire overload - take away your external hard drive and try capturing directly to an internal disk. If it works, you have two ways to solve the problem. You could install a PCI firewire card. This will create a second bus and you connect your camera to the new card and your hard drive(s) to the original firewire ports on the computer. Or, install a second internal hard drive within the computer and make that the capture scratch disk.
Quicktime Problems: If you can't capture directly to your internal disk, try capturing with iMovie. iMovie does not use Quicktime in capturing, it simply writes the DV stream file directly to the disk without any processing (splitting into seperate audio & video components). If iMovie works, your Quicktime installation is likely funky. Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
I hope one of these items addresses your issues.
Good luck.
x

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

Problem with video capture

We expect "Captfoss" to reply soon..
Code:-
import java.awt.*;
import java.net.*;
import javax.media.*;
import java.awt.event.*;
import javax.swing.*;
import javax.media.format.*;
import javax.media.protocol.*;
public class JMF2 extends JFrame implements ControllerListener,ActionListener
     Processor p=null;
     DataSink sink;
     MenuBar mb;
     MenuItem start,stop;
     Menu file;
     ProcessorModel model;
     Format formats;
     DataSource source;
     JMF2()
          setVisible(true);
          setSize(800,600);
          setLayout(new BorderLayout());
          mb=new MenuBar();
          file=new Menu("File");
          start=new MenuItem("Start");
          start.setEnabled(false);
          stop=new MenuItem("Stop");
          file.add(start);file.add(stop);
          mb.add(file);
          setMenuBar(mb);
          start.addActionListener(this);
          stop.addActionListener(this);
          addWindowListener(new WindowAdapter()
               public void windowClosing(WindowEvent we)
                    System.exit(0);
          try
               formats=new VideoFormat(VideoFormat.CINEPAK);
               model = new ProcessorModel(new Format[]{formats}, new FileTypeDescriptor(FileTypeDescriptor.QUICKTIME));
               p=Manager.createRealizedProcessor(model);
               source=p.getDataOutput();
               sink = Manager.createDataSink(source, new MediaLocator("file:///c:/New.mov"));
               p.addControllerListener(this);
               p.realize();
          catch (Exception e)
               System.err.println("Got exception "+e);
     public void actionPerformed(ActionEvent ae)
          try
               if(ae.getActionCommand().equals("Start"))
                    p.start();
                    sink.open();
                    sink.start();
                    System.out.println("start");
               else
                    sink.stop();
                    sink.close();
                    p.stop();
                    System.out.println("stop");
          catch(Exception e)
               System.out.println("Some problem "+e);
     public synchronized void controllerUpdate(ControllerEvent ce)
          try
               if (ce instanceof RealizeCompleteEvent)
                    Component comp;
                    System.out.println("Realized");
                    start.setEnabled(true);
                    if ((comp = p.getVisualComponent()) != null)
                         add (BorderLayout.CENTER, comp);
                    else
                         System.out.println("No vis com");
                    if ((comp = p.getControlPanelComponent()) != null)
                         add (BorderLayout.SOUTH, comp);
                    validate();
                    System.out.println("Updated");
          catch(Exception e)
               System.out.println("Exception rasied "+e);
     public static void main(String s[])
          new JMF2();
1..This is the code which we used for capturing and saving video in the disk..But we got a mov file created zero size..what is the reason for that..Can any one suggest a better way for this..
2..Is Creative Webcam II supported by JMF 2.1 ..
3..Suggest any other format for audio and video capturing and saving..
Thanks in advance..

Thanks T.B.M..
It worked..My webcam details are as follows:
{color:#ff6600}Name = vfw:Microsoft WDM Image Capture (Win32):0
Locator = vfw://0
{color}
It suports the following formats..
{color:#ff6600}
0. javax.media.format.RGBFormat
RGB, 320x240, Length=230400, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=960, Flipped
1. javax.media.format.RGBFormat
RGB, 160x120, Length=57600, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=480, Flipped
2. javax.media.format.RGBFormat
RGB, 176x144, Length=76032, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528, Flipped
3. javax.media.format.RGBFormat
RGB, 352x288, Length=304128, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1056, Flipped
4. javax.media.format.RGBFormat
RGB, 640x480, Length=921600, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1920, Flipped
{color}
So made the following changes in my code..
dl=CaptureDeviceManager.getDeviceList(new VideoFormat(VideoFormat.{color:#ff6600}RGB{color}));
ml=((CaptureDeviceInfo)dl.firstElement()).getLocator();
formats=new VideoFormat(VideoFormat.RGB);
model = new ProcessorModel(ml,new Format[]{formats}, new FileTypeDescriptor(FileTypeDescriptor.{color:#ff6600}MSVIDEO{color}));
p=Manager.createRealizedProcessor(model);
source=p.getDataOutput();
sink = Manager.createDataSink(source, new MediaLocator("file:///c:/Adiyae.{color:#ff6600}avi{color}"));
p.addControllerListener(this);
p.realize();
Now the file is getting created with its size depending upon how long i capture..This is fine..But when i try to play the file using a media player it doesnt open.. when i tried opening it with JMStudio i get the following message..
{color:#ff6600}Controller Error:
Failed to realize:Failed to parse the input media..
{color}Also can you tell me how to choose the FileTypeDescriptors for a particular video format.. The only FileTypeDescriptor that works with mine is the MSVIDEO..
Thanks in advance..
Edited by: s.baalajee on Dec 8, 2008 5:40 AM

Video Capture Problems HELP!

Ok i just bought a MSI GeForce4 Ti4200-VTD8X, Wich got Tv_Out + Video_in
With the card i got a Tv_out/Video_in connecter to plug in the card, now the problem seems to come, i plug my S-video cable behind my Tv_out/Video_in connecter (wich of course is connectet to my graphics adapter) and the other end of the S-video cable into a SCART Adapter wich i plug into the scart output on my VCR, but when i start any video capture software, it just says no device connectet plz HELP me! :(

Never mind, got it working all by myself now

Problem in video capture at server and fetching by client

hi
I am doing final year project it has server at one end which is connected to video capturing device-webcam in my case
and the client is mobile.
I want the live video captured be transmitted to the mobile client on fetch video request.
I have tried implementing it but facing some problems so would like to know the reason behing and also ask if the way i am following is correct or not
At server end i tried to extract frame as follows:
//the datasource handler class is as follows
      * Inner class MyDSHandler takes the Output DataSource form the
      * Processor and extracts the frame from it.
      * It implements the BufferTransferHandler so that it can receive
      * Buffer from the PushBufferStream.
     public class MyDSHandler implements BufferTransferHandler
          DataSource source;
          PullBufferStream pullStrms[] = null;
          PushBufferStream pushStrms[] = null;
          //Buffer readBuffer = null;
          int i = 1, j = 1;
          * Sets the media source this MediaHandler should use to obtain content.
          * @param source the DataSource from the Processor
          private void setSource(DataSource source) throws IncompatibleSourceException
               // Different types of DataSources need to handled differently.
               if(source instanceof PushBufferDataSource)
                    pushStrms = ((PushBufferDataSource) source).getStreams();
                    // Set the transfer handler to receive pushed data from the push DataSource.
                    //pushStrms[0] since we need to handle only the video stream
                    pushStrms[0].setTransferHandler(this);
               else if(source instanceof PullBufferDataSource)
                    System.out.println("PullBufferDataSource!");
                    // This handler only handles push buffer datasource.
                    throw new IncompatibleSourceException();
               this.source = source;
               readBuffer = new Buffer();
          * This will get called when there's data pushed from the PushBufferDataSource.
          * @param stream the PushBufferStream obtained from the DataSource
          public void transferData(PushBufferStream stream)
               try
                    stream.read(readBuffer);
               catch(Exception e)
                    System.out.println(e);
                    return;
               if((readBuffer == null) || (readBuffer.getLength() == 0))
                    System.out.println("Null or Empty buffer encountered..");
                    return;
               // Just in case contents of data object changed by some other thread
               Buffer inBuffer = (Buffer)(readBuffer.clone());
               // Check for end of stream
               if(readBuffer.isEOM())
                    System.out.println("End of stream");
                    return;
                * we can apply frame control here by deciding whether to process
                * the frame or not
               processBuffer2(inBuffer);
          public void start()
               try{source.start();}catch(Exception e){System.out.println(e);}
          public void stop()
               try{source.stop();}catch(Exception e){System.out.println(e);}
          public void close(){stop();}
          public Object[] getControls()
               return new Object[0];
          public Object getControl(String name)
               return null;
           * Processes the Buffer , i.e converts it into an image and
           * transfer its content via Socket
           * @param inBuffer the buffer received from the PushBufferStream
          public void processBuffer2(Buffer inBuffer)
          {         //extracting frame from video and writing image on stream
               //RGBFormat format = (RGBFormat)inBuffer.getFormat();
               System.out.println(inBuffer.getLength());
               YUVFormat format = (YUVFormat)inBuffer.getFormat();
               Image img = (new BufferToImage(format)).createImage(inBuffer);
               BufferedImage bimg = (BufferedImage)img;
               if(bimg != null)
                    try
                          * encodes the image in the JPEG format and writes it to
                          * the socket
                         ImageIO.write(bimg, "jpg", clientOut);
                         System.out.println("Data Written to stream");
                         logArea.append("\n Image Data Written to Stream");
                    catch(Exception e)
                         System.out.println(e);
     }and how can one control the frame rate of the video like if i require the speed of 7 frames per second and the resolution
also
i am trying to convert the frame fetched to jpeg and at client , tried making use of jpeg image property by detecting the img start and end by reading the image data in bytes from the inputstream (0xffd8 as strt of image and 0xffd9 as end)
byte[] img_data = new byte[4*1024];//buffer to read and hold one image info
try
                while((data = dis.read()) != -1)
                    //System.out.print(Integer.toHexString(data));
                    if(data == 0xFF)
                        fm = true;
                    else if(fm)
                        if(data == 0xD8)
                            //start of the image
                            System.out.print("Start of image found : ");
                            //ctr should be zero at this stage here
                            //writing to byte[]
                            img_data[ctr] = (byte)0xFF;
                            ctr++;
                            img_data[ctr] = (byte)0xD8;
                            ctr++;
                        else if(data == 0xD9)
                            //end of image
                            //writing to byte[]
                            img_data[ctr] = (byte)0xFF;
                            ctr++;
                            img_data[ctr] = (byte)0xD9;
                            ctr++;
                            // consrtucting image from the byte[]
                            img = Image.createImage(img_data, 0, ctr-1);
                            if(img != null)
                                repaint();
                                System.out.println("Image drawn");
                            else
                                System.out.println("Image is null");
                                /*try
                                    Thread.sleep(500);
                                catch(Exception e)
                            ctr = 0; // ctr back to zero for the new image
                            //break;
                        else
                            //writing to byte[]
                            img_data[ctr] = (byte)0xFF;
                            ctr++;
                            img_data[ctr] = (byte)data;
                            ctr++;
                        fm = false;
            catch(Exception e){}
    }The problem i am facing is the client gets the black image just for a fraction of second and then the application hangs and no video is visible.
I have very little time left to complete this project as deadline is very close
please would be very grateful if guided timely.

equator07 wrote:
Thanks for the reply.
i saw in recent posts some protocols had been made use of like rtp i am not making use of any of these
will it effect?I can see that you're not using RTP... and "will it effect?" doesn't make any sense AT ALL...
is the way i have made use of jmf correct?There's no correct way to use an API... but no, you're not doing things in even remotely a "tradional" way...
*like the way i am extracting the frame,
and how can i set the resolution of the video taken by cam and adjust the frame rate?*I have no idea if your code works. I assume that you would have tested it, and proved it to either be producing a valid JPEG image or not. If you've not done that testing, then you obviously need to.
because i want live video to be seen at client end i am seriously confused and the progress as just come to an hault at this point and am in real need of guidance.You should probably be using RTP and the tradional way of using JMF then...
[http://forums.sun.com/thread.jspa?messageID=10930286#10930286]
Read through all of the links I gave the person on the above thread and you'll be on a lot better footing as far as using JMF goes.
shall i send the server side code.Till now server and client are both on local host.No, I don't need to see any more of your code. I'm not a proof reader, and I'm not going to debug it for you. Do you own work.

Add video capture feature to CIVideoDemoGL

Hello,
I'm a little bit stuck with the CIVideoDemoGL. How do I add video capture feature to this demo instead of using a file as input?
I know how I capture the video stream from camera and captureOutput:didOutputVideoFrame:withSampleBuffer:fromConnection: is called every time a new frame comes. I can also see a preview of the captured video on screen on the CaptureView.
What I want to accomplish is methods to manipulate video on the fly (as in CIVideoDemoGL) directly from a camera (iSight or likely).
I have tried to change renderCurrentFrame in VideoView.m. Instead of
+inputImage = [CIImage imageWithCVImageBuffer:currentFrame];+ I have made a method that retrieve a CIImage* from VideoController (where I've place every captured frame from camera).
The method call is like this: +[delegate getCurrentCapturedFrame:self data:(CIImage*)inputImage];+
This method initializes the given CIImage with data from the captured frame.
When I run this code I retrieve the following error in console +Program received signal: “EXCBADACCESS”.+
So, something bad is going on but I don't know if I'm on the right way. Maybe it's my method getCurrentCapturedFrame that returns a bad object.
Any ideas?

Hello again,
Thanks for your help. There was something wrong with my code.
During this weekend I have managed to get captured video playing. But the video is almost black and white and if you zoom into it you can see red blue and green vertical lines. Even if I remove the filters I can see this happen. If I compare the video with the Capture view that I have implemented beside the OpenGL View I can see all colors on the first one. Any ideas?
I have modified the original renderCurrentFrame to the following:
- (void)renderCurrentFrame
NSRect frame = [self frame];
NSRect bounds = [self bounds];
CGRect imageRect;
CIImage *inputImage;
CIImage *timecodeImage;
// update timecode overlay
timecodeImage = [timeCodeOverlay getImageForTime:[self currentTime]];
if(!readyToGrabFrame)
return;
//Put captured image into inputImage
inputImage = [CIImage imageWithCVImageBuffer:mCurrentImageBuffer];
imageRect = [inputImage extent];
[colorCorrectionFilter setValue:inputImage forKey:@"inputImage"];
[effectFilter setValue:[colorCorrectionFilter valueForKey:@"outputImage"] forKey:@"inputImage"];
[compositeFilter setValue:[effectFilter valueForKey:@"outputImage"] forKey:@"inputBackgroundImage"];
[compositeFilter setValue:timecodeImage forKey:@"inputImage"];
CGPoint p = CGPointMake((int)((frame.size.width - imageRect.size.width) * 0.5), (int)((frame.size.height - imageRect.size.height) * 0.5));
// render our resulting image into our context
[ciContext drawImage:[compositeFilter valueForKey:@"outputImage"]
atPoint:p
fromRect:imageRect];
// housekeeping on the visual context
QTVisualContextTask(qtVisualContext);
My captureOutput:didOutputVideoFrame:withSampleBuffer:fromConnection is moved to VideoView class instead and I have also created an object that keeps the captured buffer with the name mCurrentImageBuffer
The method looks like this now:
- (void)captureOutput:(QTCaptureOutput *)captureOutput didOutputVideoFrame:(CVImageBufferRef)videoFrame withSampleBuffer:(QTSampleBuffer *)sampleBuffer fromConnection:(QTCaptureConnection *)connection
countFrames++;
[lock lock];
CVImageBufferRef releasedImageBuffer;
CVBufferRetain(videoFrame);
@synchronized(self)
//basically, have frame to be released refer to the current frame
//then update the reference to the current frame with the next frame in the "video stream"
releasedImageBuffer = mCurrentImageBuffer;
mCurrentImageBuffer = videoFrame;
CVBufferRelease(releasedImageBuffer);
readyToGrabFrame = YES;
[lock unlock];

Ti4800SE-VTD8X & WDM video capture problem...

sheeesh... I did everything I know to solve the problem... I read every thread on this help forum having the word "WDM" using the search engine and also on other webpages and forums. I can see that I am not the only one having problem with the WDM drivers
Can anyone help me with this ?( :
The WDM driver fails to load and make my system boot up time to around 45 seconds to 1 minute which is normally booting in less than 18 seconds without the WDM driver installed. In the "Device Manager", I see a nice lil " ! " on the "nVidia WDM Video Capture (Universal)" codec.
Here is what I did to date :
1) I had an MSI Ti4200-VTD8X on a different setup computer and had the same problem. I changed my 250 power supply to a 350 watts as I read it might solve some problem but it did not.
2) I exchanged the Ti4200 for a brand new MSI GeForce4 Ti4800SE-VTD8X (MS-8900) and STILL have the same problem
3) I completely change my "old" P4 1.8 to a brand new setup (see at bottom) AND STILL have the same problem.
4) Why did I buy an nVidia product instead of ATI ? dunno...
5) I have tried to uninstall, reinstall, uninstall, reinstall, uninstall, reinstall... huh ? ?( oh yeah, the nVidia WDM drivers 1.21 and 1.22 still doesn't work. I even tried old WDM drivers as some said solved their problem. Installed 1.04, still the same problem.
6) I have tried the WDM from MSI (was happy to see a newer version 1.27) and disaster 8o computer crash with a nice blue screen and reset itself as soon XP loads this famous WDM driver during boot sequence. Had to start in safe mode using the last known working version... At least, that worked...
7) The only way I can make this crappy driver to works (and that is at 50%) is this way
a) in the device manage, I right clic the faulty codec (that XP kindly took the time to open for me to show me that this is not working...) and go to "update the driver"
b) then I click "install from a specified location"
c) then I click "do not search, I will chose the driver to install"
d) then I can see "nVidia WDM Video Capture (Universal)" in the list so I click on it
e) click "next" button
f) XP reinstall the driver withtout the " ! " once I go back in the "Device Manager".
The only thing with that is that it is unstable. Sometimes it might work for 1 hour, sometimes 10 minutes. What it does is it completely crash the application which is using the WDM, for instance InterVideo WinProducer. And here is the kind and gentle warning message box from XP saying : "InterVideo WinProducer has to shut down. We are sorry blah blah blah blah..." and of course you lose any recordings you were capturing or working on...
If I reboot the system, the codec is once again not loaded properly.
So, can some one help me with this ???
Thank you ! :D

Quote
Originally posted by TheDanishGuy
Hey Alesis
TvTool is a program/tool that help you, with TV-out on you GeForce 4.
For more information on TvTool look at this webpage.
http://tvtool.info/index_e.htm
Try and download demo version, and see if you have use for it. I would like to use it, when I want, to watch DVD on my TV.
So now we need MSI or nVidia to make a WDM driver that works with nVidia VGA 44.03 driver.
Thanks man !
I have tried the TV Tool and quite frankly, I don't really like it... For the moment that is... It messed up a little the video settings like resolution and refresh rate. I have had numerous errors also saying to update to the latest version but you already told me about that.
I have noticed something with 41.07 driver that I lost a nice feature that might interest you ! In fact, with this feature, I think you would not need the TV Tool.
I had the option before to maxize the TV out to full screen when the DVD player started or when I watched any video format.
I can have the Windows Media Player (using nVidia nDVD for DVD) running minimized on my main VGA monitor and get the S-Video out run full screen which was really nice. Sadly, this option looks to be nowhere to find with the Detonator 41.07 version. :(
I don't know if there will be a serious revision about the newest Detonator drivers so it can support our card with full features like the full screen one...
When you fix a problem, there is a new one that come out :O
If you get any hint on how to complaint at MSI or nVidia, it would be great to let them know that something has changed since the v.41.07 that makes a lot of nVidia users having problems with the WDM issue.
Thanks again, at least, I can capture some video ! But not able to watch it full screen anymore on the TV out
Let's keep in touch !
See ya !

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Problems installing WDM Video Capture

I bought a complete new computer and I bought the MSI GF4TI4200 with 128 MB DDR RAM, when I installed the drivers for the card there were no problems, but when I installed the capture drivers, the computer gives an error on the Nvidia WDM Video Capture(Universal), it cannot be started he says (Code 10). I use Windows XP. I first tried with the cd, after that I deleted all the drivers and downloaded them from this site, but the problem remains. Also the LiveUpdate doesn't do anything good.
And my computer reboots all the time, I think due to the bad installed card. Sometimes frequently, and sometimes after a couple of hours, always when I do something else.
Can someone tel me what to do please?
My computer:
Pentium 4 2,53 Ghz
ASUS P4S8X
512 MB DDRRAM pc2700
MSI GF4TI4200 128 MB
Hercules Gamesurround Fortissimo III
Seagate 80 GB 7200
LG DVD player 16x48
LiteOn 40x12x48

I've been there, been stupid (see previous reply). Except in my case it took the third MSI Tech Support guy to sort it out. To my knowledge the G4Ti4200 actually ends in "TD" not "VTD". "VTD" is only available on the 4400 and 4600 models. The "T" stands for TV out and the "D" stands for digital video out (flat screens) the "V" stands for video in or video capture. The 4200 doesn't have video capture ugh!!!!
I should have put two and two together realizing MSI really is cutting corners with their one size fits all documentation and driver sets. The thing that gets me is that they really went out of there way to cut costs (and ultimately confusing me) in that I looked at the connector on the back and it had the number pins consistant with video capture so I thought I had it. Older versions with TV out only had the standard 4 pin S-video DIN electical receptical. What they have done is invented a nonstandard DIN receptical so the standard 4 pin S-video plug would fit but they also crammed in a few additional pins for video capture. Now they can use the same connector on the all cards with or without video capture capability.
They will ultimately pay I exchanged a perfectly good card for a new one and I bet I'm not the only one.

Problems installing nVidia WDM video capture drivers

I have a MSI MS-StarForce GeForce4 Ti 4600 (NVIDIA GeForce4 Ti 4600) video card installed on my computer and I can't seem to figure out why when I try to install the WDM video capture drivers - I always get the same error message "This device cannot start. (Code 10)" Can someone...anyone please explain to me what code 10 means and why I'm having this problem? My OS is Windows XP Pro.
I would be so appreciative for some support of any kind
Thanks

Funny you should ask about the Vivo connector...When I originally purchased the card, Upon arriving home, I opened the box and after reading the manual for a few minutes- I noticed I didn’t see the TV out Video 4 in one connector that the manual said should be in the box. I unpacked the box completely and searched my house entirely and there was no 4 in 1 connector. Well….having purchased more than my fair share of peripherals from Fry’s Electronics, I already knew that I had more than likely purchased unknowingly a previously opened box and then repackaged to look new except with one flaw….a missing video connector. The following day, I attempted to get Fry’s to claim some type of liability and after a heated discussion with the manager - I ended up leaving Fry’s without a new un-opened box or a replacement for the connector that had been missing.
Then months later I was on the PC Club’s website and came upon a Vivo connector that I thought might work with my card. I ordered it and two months later! Literally! It arrived. (That’s another horror story!!!) The Vivo video in/out connector arrived and to my disappointment, didn’t work with my card.
So to make a long story short (TOO LATE!) No the card doesn’t work with a Vivo connector but rather a MSI named TV in/out 4 in 1 connector. But since I don’t have it anyway, my plan is to try capturing video with an S video cable and give that a whirl!
So to make a long story short (TOO LATE!) No the card doesn’t work with a Vivo connector but rather a MSI named TV in/out 4 in 1 connector. But since I don’t have it anyway, my plan is to try capturing video with an S video cable and give that a whirl!
Just an update- I have now downloaded the software you have suggested and plan un- installing and then re-installing the drivers you had recommended I'll let you know
Thanks again for all you're input.

Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

For all people with video capture problem

For all people who have trouble with video capture here is the Link

thnx rus,
I had no problems with ViVo, but this file is tiny.
No frills, just what it's meant to do..
:D :D :D
(will test thorough later on)

Video capture add-on problem

Similar Messages

Maybe you are looking for