Video capture device Plextor PX-AV200U doesn't work

Hello there.
This is the last piece of HW that I still didn't manage to work with linux. I bought it few years ago, when I used windows and I'm trying to make it work since I started to use linux 3 years ago.
My dmesg output is:
usb 1-10: new high speed USB device using ehci_hcd and address 10
em28xx: New device USB 2821 Device @ 480 Mbps (eb1a:2821, interface 0, class 0)
em28xx #0: chip ID is em2820 (or em2710)
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 21 28 90 00 11 03 6a 22 00 00
em28xx #0: i2c eeprom 10: 00 00 04 57 06 21 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 02 00 01 01 f0 10 00 00 00 00 00 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 03 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 32 00 31 00 20 00 44 00
em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x37da7b8a
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: 500mA max power
em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
em28xx #0: found i2c device @ 0x4a [saa7113h]
em28xx #0: found i2c device @ 0xa0 [eeprom]
em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
em28xx #0: You may try to use card=<n> insmod option to workaround that.
em28xx #0: Please send an email with this log to:
em28xx #0: V4L Mailing List <[email protected]>
em28xx #0: Board eeprom hash is 0x37da7b8a
em28xx #0: Board i2c devicelist hash is 0x6ba50080
em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0: card=0 -> Unknown EM2800 video grabber
em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
em28xx #0: card=2 -> Terratec Cinergy 250 USB
em28xx #0: card=3 -> Pinnacle PCTV USB 2
em28xx #0: card=4 -> Hauppauge WinTV USB 2
em28xx #0: card=5 -> MSI VOX USB 2.0
em28xx #0: card=6 -> Terratec Cinergy 200 USB
em28xx #0: card=7 -> Leadtek Winfast USB II
em28xx #0: card=8 -> Kworld USB2800
em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2
em28xx #0: card=10 -> Hauppauge WinTV HVR 900
em28xx #0: card=11 -> Terratec Hybrid XS
em28xx #0: card=12 -> Kworld PVR TV 2800 RF
em28xx #0: card=13 -> Terratec Prodigy XS
em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
em28xx #0: card=15 -> V-Gear PocketTV
em28xx #0: card=16 -> Hauppauge WinTV HVR 950
em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
em28xx #0: card=19 -> EM2860/SAA711X Reference Design
em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
em28xx #0: card=23 -> Huaqi DLCW-130
em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
em28xx #0: card=25 -> Gadmei UTV310
em28xx #0: card=26 -> Hercules Smart TV USB 2.0
em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
em28xx #0: card=29 -> EM2860/TVP5150 Reference Design
em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
em28xx #0: card=31 -> Usbgear VD204v9
em28xx #0: card=32 -> Supercomp USB 2.0 TV
em28xx #0: card=33 -> (null)
em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
em28xx #0: card=35 -> Typhoon DVD Maker
em28xx #0: card=36 -> NetGMBH Cam
em28xx #0: card=37 -> Gadmei UTV330
em28xx #0: card=38 -> Yakumo MovieMixer
em28xx #0: card=39 -> KWorld PVRTV 300U
em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
em28xx #0: card=41 -> Kworld 350 U DVB-T
em28xx #0: card=42 -> Kworld 355 U DVB-T
em28xx #0: card=43 -> Terratec Cinergy T XS
em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
em28xx #0: card=45 -> Pinnacle PCTV DVB-T
em28xx #0: card=46 -> Compro, VideoMate U3
em28xx #0: card=47 -> KWorld DVB-T 305U
em28xx #0: card=48 -> KWorld DVB-T 310U
em28xx #0: card=49 -> MSI DigiVox A/D
em28xx #0: card=50 -> MSI DigiVox A/D II
em28xx #0: card=51 -> Terratec Hybrid XS Secam
em28xx #0: card=52 -> DNT DA2 Hybrid
em28xx #0: card=53 -> Pinnacle Hybrid Pro
em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
em28xx #0: card=59 -> (null)
em28xx #0: card=60 -> Hauppauge WinTV HVR 850
em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
em28xx #0: card=62 -> Gadmei TVR200
em28xx #0: card=63 -> Kaiomy TVnPC U2
em28xx #0: card=64 -> Easy Cap Capture DC-60
em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
em28xx #0: card=66 -> Empire dual TV
em28xx #0: card=67 -> Terratec Grabby
em28xx #0: card=68 -> Terratec AV350
em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
em28xx #0: card=70 -> Evga inDtube
em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
em28xx #0: card=72 -> Gadmei UTV330+
em28xx #0: card=73 -> Reddo DVB-C USB TV Box
em28xx #0: card=74 -> Actionmaster/LinXcel/Digitus VC211A
em28xx #0: card=75 -> Dikom DK300
em28xx #0: card=76 -> KWorld PlusTV 340U or UB435-Q (ATSC)
em28xx #0: Config register raw data: 0x90
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 video device registered as video1
em28xx audio device (eb1a:2821): interface 1, class 1
Can't get any output, not even audio.
I tried to find threads about similar eb1a:2821 cards, but none of those helped me.
The only possible solution I found is patch, which also didn't help me yet, since I didn't manage to successfully apply it (well, I'm still bit newbie in such operations :-X).
I use kernel-2.6.36-ARCH.
Could anybody help me with this delicious problem?
Regars,
Michal

Hi @PatDenis! Welcome to the BlackBerry Support Community Forums!
Unfortunately, you need more memory to perform that task, you need a media card to be able to start recording a video. By the way, the 9720 is not a Bold (according to your profile), It's just BlackBerry 9720. Cheers!
Record a video
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Similar Messages

How to connect a video capture device to Satellite M30X 127

I'm going around in circles trying to find a video capture device that will function with a laptop and would be grateful for advice. By way of example, I'm now looking at the 'Canopus ADVC-110', although still looking around (but not Pinnacle, who seem to have a terrible reputation for capture items).
Problems include:
1. Main problem is - many video capture external devices require a 'line-in' to PC for good quality audio transfer. This laptop doesn't have a line in, only the mike and headphone jacks. In addition, I've also tried a few RCA pins in the 3.5mm microphone/headphones jack and they were too small. How to solve the problem of getting audio from vcr to my PC?
2. The ADVC-110 connects to the PC via Firewire (and S-video), but is a SIX-pin type. M30X is a FOUR-pin type. Are there adapters available?
3. Some capture programmes seem to require huge capacity of RAM. Is a laptop going to be suitable to do the job? (I simply want to capture old vhs tapes from vcr to PC, then burn to DVD with Nero 7 or similar).
Thanks in advance!

Hello
You are right! You must use external device for signal transfer to your notebook. I dont know where you have this info but I have good experiences with Pinnacle product. For data transfer I have used USB port.
'Canopus ADVC-110 is not known to me but I dont see any reason why this should not work well. Use delivered software for video capturing and there should not be any problem.
Only thing is that after recording the whole video material must be prepared for burning and unit need a lot of power to do this well und fast. When you buy this and want to use on right way I recommend you to expand RAM to 1GB.
Compatible memory modules for your Satellite M30x are:
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Bye

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

Video Capture Devices?

What is a good video capture device for the macbook that I could use to capture video from my video camera(which has no firewire or USB ports on it).

Your camera is a Hi8 and is also known as "analog". I'm an editor.
Since you're camera doesn't have a FireWire port (which is what all capturing is done with), there's no way to capture without an external device, as you may know.
So, I suggest getting the Canopus ADVC-110. I have it and it works flawlessly with FCP (which is what I edit in) and it will work with iMovie also. There is also the Canopus ADVC-55. For both of these adapters, you'll need to hook up the RCA (white, red and yellow) cables to the device, and capture. Your camera should have RCA inputs. These devices are a little expensive, but they work great. No additional software/drivers. It's worth it.
Canopus ADVC-110
Canopus ADVC-55
Similar in price, personally I would get the ADVC-110.
Remember to mark as helpful or solved.
-benny

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

External video capture devices?

I'll be getting a Macbook Pro soon and I have a older Sony camcorder that doesn't have USB or fire wire. It's only output is composite and L R audio. Can anyone recommend a good external video capture device that works with a mac and Final Cut Express?

Hello,
I'm currently using a Canopus ADVC110 analog/digital converter with no problems with Final Cut Express 4.0.
You can see more details about the device on http://www.canopus.com/products/ADVC110/index.php
I bought my new one on eBay and paid almost half the current price.
Regards,
Armando.

Play video from video capture device

I tried fixing my running of out memory for the video buffers problem but could find a fix. I have tried code from a book and it doesn't work. I can only get the video feed to display the video from the capture device using JMStudio, so the device works fine. Maybe my coding methodology/process is incorrect.
Is there anyone out there that knows of some working code that plays live video in a window from a video capture device. Any other help regarding to displaying capture video would help. Please help.
Thanks in advance.

I am using the Belkin USB VideoBus II and it uses the video for windows drivers (vfw), so yet it is supported. And it works when I use JMStudio to play the live feed from the capture device. Thanks for the suggestion.
I also ran the code suggested above and I still get the same errors. Thanks for your suggestions. Any other help or suggestions would be appreciated.

Detecting Video Capture Devices without Installing JMF

Hi All,
I want to detect the video capture devices, without installing the JMF.
I had included the jmf (windows version) in lib path in netbeans ide. I am able to detect the audio capture device. But unable to detect the video capture devices. But if I install the JMF, I am able to detect the Video Capture devices in My system. Can anyone help me?
Thanks,
Vinoth Kumar.

YES! Please take a look at SIP Communicator project. They have all what u want.
The main idea is copy all .dll files to System or System32 (Please check files which JMF will copy to ur computer and where).
U need to have jmf.jar and sound.jar too ( maybe more) in your computer.
Your program should have DirectSoundAuto.java, JavaSoundAuto.java, JavaSoundDetector.java, JMFInit.java. Those files are in JMStudio source code. They are used to detect all capture devices and register it to JMF, but wait !!! where they will be saved? In order to save information about capture devices which are detected, you should create "jmf.properties" file in the same location with jmf.jar.Therefore, u should modify the JMFInit.java so it can check if the "jmf.properties" exists. If it's not, you have to create it.
Check SIP Communicator at Folder "media" then "device". They have modified those files I mentioned above and created some new files to SC can detect more devices.
Edited by: tamngminh on Sep 16, 2008 9:50 AM

Advice Needed for Video Capture Device

Hi,
I'm looking to buy a USB (or Firewire if they exist) video capture device that can take S-Video and composite connections. Could someone recommend me best one under $150 that is compatible with Snow Leopard? Also, and more importantly, does anyone know if it is possible to capture the signal via Quicktime Pro or Final Cut Pro rather than bundled third party software.
Thanks!

I used the predecessor to the Canopus ADVC55 to load VHS tapes into a mac. As I recall I brought the firewire signal into iMovie (could have been Final Cut Pro too, as I had both on the system). Here are the specs: http://www.grassvalley.com/products/advc55 . Also some comments on it at http://www.amazon.com/Hardware-ADVC-55-d-Converter-Ntsc/dp/B000HGVZG0/ref=sr_1_2 ?ie=UTF8&qid=1323954590&sr=8-2 Here's another source to buy it: http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Ana log_to_Digital.html .
They also make an ADVCmini, which I haven't used, which is probably less expensive, with specs at http://www.grassvalley.com/products/advcmini

Adobe premiere elements 12 with diamond vc500 one touch video capture device.

Adobe premiere elements 12 and using Diamond vc500 one touch video capture device.
AVI files will not load into Adobe premiere elements 12.
I bought what I thought were the two best software and capture devices.
I am archiving old VHS tapes and using Diamond vc500 capture software called EZ grabber. I thought the best archiving format would be AVI files. As I just started this project. I am willing to do what is needed.
That even being, going and buy another capture device that being for a VCR to PC using a USB are even a Video card.
EZ grabber software ask you to record in what format. I picked AVI. There is DVD - SVCD - VCD - MPG4. I want to archive then go back and edit. The DVD or SVCD format, is that not the same as mpeg 2?
You and I know the drill. Saving in what long term archive format and that dare thing about video compression and losing quality of the videos. Its all a nightmare.
Once again I am willing to buy another capture device for a VCR that will work with Adobe premiere elements 12.
Help please with long term archiving format and capture device.
Thanks

The answer is B.
Capturing the VHS content to computer (via the Diamond vc500 and USB connection and EZ grabber) to obtain an .avi file on your computer and then trying to import that into Premiere Elements with its Add Media/Files and Folders?
When I do that, the Adobe premiere elements 12 crashes or only loads a 2 mins of video.
The firewire connection device "Canopus" product sounds great. But I really don't want to spend that much on my home videos. My PC does not have a Firewire connection. So add a new card for that and the Canopus product. I could just pay someone to do my VHS tapes.
Diamond vc500 $35
Adobe premiere elements 12 $65
Firewire card $50 plus
Canopus $180
$330 is way too much for simple home VHS videos

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Video capturing devices !

Hi every body !
Can any body please give me the list of all online video streaming JMF compatable video capturing devices!
any response will be highy appreciated.
please try to be specific to the company and model because i am going to buy one!
Thank you !

This might help. Scroll down to the bottom of this page:
http://java.sun.com/products/java-media/jmf/2.1.1/formats.html
Regards,
Paul

Video capture device not recognized

Media Encoder will not recognize my video capture device. Anyone had this problem?

Capturing is done in Premiere
Jeff

Video Capture Device

I have a cheapo Capit usb video capture device. It works fine in my Win 7 T61 with only 4gb RAM and a 2.0gh C2D. When I try to use it in the T400, it's not so good. The monitor frame is scrambled when I go to record and the audio and caption is way off. What did I do? These are both set up nearly identically.
T400,, 2.53ghz T9500,8gb ram Windows 7 Home Premium
T61,15.4 T7300, 2gb RAM, Windows 7 Home Premium
14.1 T23, type 2647 9LU, 1.13 PIII, 1gb, XP Pro

Yea I actually have a sony that has analog to digital passthrough. However, i've been using it as a webcam recently and i'm almost convinced that that has something to do with the fact that i've had to send it for repairs recently. I think that having it on for long periods of time without having a tape in it or using it for recording poses a potential risk for head damage. So im a little wary about using it as a bridge to capture hours of analog footage to my computer. So would you know of any other peripherals designed specifically for capturing analog sources on an imac?

Video capture device Plextor PX-AV200U doesn't work

Similar Messages

Maybe you are looking for