Video Capture issues in Premire Pro CS3

I bough an HP z200 Win 7 64 bits 8gb intel i7 870 quad core. I install the production premium CS3. everything is working fine. Now. the problem is when i was capturing video (dv) in the minute 8 it shows a messaje telling that the machine is running in very low memory. Why it occurs? since my old HP is a xw4200 Pentium 4 (HT) with 1.5 gb. Can anyone help me please...!!! Do i need to change any parameter in the software or just need to buy more memory? ( but It is 8GB) I don't understand. ( I already clic the win xp compatibility mode)

Just to verify... you are using a Firewire connection to transfer video from your tape based camera?
Read this about Legacy Driver and Capture http://forums.adobe.com/thread/869277?tstart=0
- And a Picture http://forums.adobe.com/thread/727755?tstart=0

Similar Messages

"fire wire" video capture cards for mac pro

....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

Your question doesn't make much sense.
What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

When I insert the usb of my Elgato Video Capture into my Macbook Pro, it says 'USB Devices Disabled'? What does this mean and how can I solve it?

When I insert the usb of my Elgato Video Capture into my Macbook Pro, it says 'USB Devices Disabled'? What does this mean and how can I solve it?
I've partitoned Windows swell and it says the same thing? I'm trying to live capture from my Sony Camcorder through Elgato but I just get the above message?

This means that the backups were made with a later version than the version currently on the phone. You will have to update the phone to 6.1.3 to be able to restore the backup. You can restore a backup made with an earlier version, but not with a later version.

Can I use Elgato VHS Video Capture with my Macbook pro?

Can I use Elgato VHS Video Capture with my Macbook Pro? It comes with a CD on which is the software. My Macbook pro does not have a CD drive. how do i get the software?

Elgato provides a download link to their latest Video Capture software v1.1.5. Supposedly runs on Snow Leopard and later. They recommend Yosemite.

Ideal Computer and Capture hardware for Premiere Pro CS3

I'm working with Premiere Pro CS3 and want to build a new computer based on the AMD platform. I'm currently looking at the AMD Phenom 9850, AMD's newest Quad-Core processor. I'm looking at pairing it with 4GB of DDR2 1066 Memory, a 1GB PCI-E x16 Video card with 4 DVI and 1 HDMI outputs, 2TB SATA 3.0GBs 7200 RPM Hard drives in a striped/mirrored RAID array, all running on one of Gigabyte's newest AM2+ mobos. I'll be running XP Pro SP3. I think I've got the computer locked down, unless anyone's got some insight for me into the specs on it. Also, does Premiere Pro CS3 take advantage of Vista's 64-bit yet? I hate Vista with a passion, but if I'll get significant performance increase from it, then I'll make the migration.
My big question is this: what's Adobe's recommended capture hardware? Budget isn't necessarily a consideration and I'd love something that's got HD-SDI BNC I/O in addition to the standard composite, YCrBr, and DV I/O. I'd also like something that has good pro-audio I/O integrated. Ideally something that would include multiple analog I/O via 1/4" or XLR as well as digital I/O via ADAT lightpipe and AES/EBU. BNC wordclock I/O would be nice too.
Any recommendations? I'm fairly new to the video world, though I've been in the pro audio business for ten years.
Thanks in advance!

>2TB SATA 3.0GBs 7200 RPM Hard drives in a striped/mirrored RAID array
For video, RAID 3 is your best option, found primarily on Areca cards.
For the kind of ins & outs you're looking for, I think the Matrox Axio will be your only option. That's ain't cheap, though.

Lumia 1520 Purple Tint Issue/Video Capturing Issue

Hello all..Just got my 1520 yesterday and found out video captured at low light contains purple-ish/pink-ish color around the corners. So I went back to the Nokia store and ask for change, but turned out all three devices tested also having the same issue. The staff said this is the quality of low light video, nothing's wrong, and they cannot change a new one to me.
I went and do a testing on the gradient color map and turn out the gray colors are indeed show as purple, exactly the same issue on my old N8, just this time is even worst, it's affecting the quality of the video.
Besides, checked on few videos on youtube, some of videos having same issue too...
Anyone else having this problem? Reckon the issue due to software or hardware? Thanks.

If your doing testing indoors where your using CFL light bulbs i think its a know feature
even my eyes did it yesterday when i stared at a CFL light bulb and looked away hehe
but hey i might jsut be mad :¬)

Importing video files into Adobe Premiere Pro CS3

I own a Sony Handycam DCR-SX63. When I import the movies I have taken onto my PC (Vista) they are .MPG files. When I import these files into Premiere Pro CS3 the video portion imports but the audio of that file does not. I have read all I can find and nothing seems to answer my question directly. I tried an encoder to see if maybe Premiere doesn't accept .MPG files. I converted it to .AVI file and tried to import and that gave me audio with no video. I tried opening the new project with a dozen different settings offered up by Premiere but every one I tried gave me the same outcome when I tried to import my video file.
Please. please. please help. I am pulling my hair out.
I appreciate any help given.
Thanks

First... To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory
Second... Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
IF your files are MJPEG...
MJPEG edit with Morgan or MainConcept http://www.morgan-multimedia.com/
http://www.mainconcept.com/site/prosumer-products-4/motion-jpeg-codec-785/information-797. html

Video display issues with Mac Pro and GeForce 7300?

I'm just wondering whether anyone else has experienced any video strangeness with their Mac Pros with GeForce 7300 cards? Basically, twice now I've had the mouse cursor stop responding and the entire screen turn black, then a second later everything's back to normal (with the cursor moving and the display back). I seem to recall a similar issue on my Windows PC with a Quadro FX 1100 card, so I'm hoping it's just a video driver issue.
Bryan

I am not sure if its the monitor, the MP, or the video card, but, I have had my computer completely replaced after reporting to my local Apple Store about my G5 fans over heating and my monitor either not being able to wake or refusing to sleep. I called AppleCare and did all the normal trouble shooting but they said take it in to store. But now that I have a brand new MP 3.0 I am getting the same issue but no fan noise. I have a 23Cinima HD (the strore said it was fine when they had both my computer and monitor in) but last night after hours of inactivity the monitor had the screen saver on but didn't got to sleep. I then put in to sleep but when I got up this morning I couldn't wake it up. When I got my new computer (3 days ago) I didn't migraite any of my old stuff. I have been slowly reinstalling all my software and updated anything before I install anything else as an added attempt to not have any bad files. I have 2 gig of ram and 500 hd with the 7300 card. I am at a lost I checked and rechecked all my setting. The only other thing I have connected is my airport extreme base.
Any idea's anyone?
Ops one last issue, I have blown my apartment circut breaker three time while attempting to start the new PM and once it did it when I was trying to wake it just by tapping the space bar. Is it the computer being more power hunger?
Mac OS X (10.4.8)

Video Playback Issue in Premiere Pro CS6

I am editing a video with 2 video tracks on top of each other. When I scrub through the timeline or jusy hit play in the timeline the top layer of video scales to about 50% and plays on top of the layer below it. But it didn't do that 2 days ago. Any ideas on what could cause that? I have attached a screen capture of what it looks like while playing back. Any info would be greatly appreciated.
::Premiere Pro CS6 (v 6.0.5) and a Macbook Pro running OSX 10.9 on a SSD, and 8GB RAM::

They are both 1280x720 but they were shot on 2 different cameras. The thing that is killing me is that I have done this exact same camera setup and editing before without this issue. And it only scales the top layer video down while scrubbing or playing back (spacebar). When the playhead is still it pops back to normal.

Capture Problems - Prem. Pro CS3

Hi there,
been trying to upload some footage for a few days now, but with no luck. Basically, when connecting my camcorder (Panasonic NV GS300) the computer makes the beep noise it makes when a device is connected, a few seconds to a minute pass and then it beeps again and the device can't be found on the computer. In the the little bit of time the computer recognizes the device I try and load up the capture screen in Premiere, which crashes Premiere until the computer looses the device again. In Device Manager the camera appears for a brief amount of time, but vanishes quickly.
I have tried changing Firewire ports (I have two seperate ports on my PC) and bought a new cable today, but the problem is still presenting itself. I'm guessing the problem may lie in the camera or PC, but am not sure.
Any help?

HI,
I use CS3 and have a firewire 400 and 800 card to capture video from mini DV...which I think your camera is...and if you use it like a playback device ( the camera ) you can capture your whole tape in real time to your hard drive ....using that ScLive program...
There were problems making the connection between the computer and camera ( playback device ) using CS3 capture.
The ScLive program for capturing somehow made it easier to deal with the mechanics of my computer system...
There's no guarantee that ScLive would work either...but it did for me and thought I'd mention it...
Good Luck !
Rod

8330 Video capturing issues

Hi,
I got a 8330 yesterday and I am having issues recording a video.
After a master reset, the capturing works fine.
As soon as I change the encryption mode under 'options/media card', the phone
does not let me capture videos anymore, even after I changed the options back to default!
Every time I try to record a video, it shows a '0KB' size at the lower left corner.
I've swapped the memory cards and even the phone with no results.
After a master reset, I can record again until I change the media card options...
Any advice is greatly appreciated!

resc wrote:
Can the data on the card be accessed via another BB if the encryption option is turned off?
Nope. You will not be able to access the files from anything other than the BlackBerry used to encrypt the data. This includes your PC, another BlackBerry, or even your BlackBerry if you happen to wipe or upgrade the OS.

Problem with video capture with Blackmagic Intensity Pro card

I have just installed a blackmagic Intensity Pro card to download analogue VCR tapes to DVD. I have set all the input parameters to the Blackmagic card in both Premiere and the input routine for the card. I am using the breakout cable for NTSC input with the green Y input for the video and the L & R audio inputs. When I try to capture I get snow in the premiere capture window, but it does record the L & R audio. When I stop the tape deck I momentarily get the blue screen with STOP showing and then back to snow. I am hoping it is just a setting somewhere but where????
The computer is running Vista 32 home premium with 3G ram
Comments very welcome

Is there a BlackMagic setting required to tell the driver to see the green as composite rather than component?

Video capturing issue in iPhone

Hi. I m using iPhone 4s ios5. When I try to capture video I can hear the dong sound and it stops working. It shows only still image and the recoding stop icon s disabled(video recording minutes not showing n the top).
Please help. Thanks n Advance.

I seem to have had a similar issue to the one you're describing.
Sometimes when the slide reaches the end, the video will restart instead of advancing to the next slide - not consistently, but occasionally.

PS10 video capture issue

PSE10 recognizes Pinnacle 710 USB as video source but will not capture video footage

Welcome to the forum.
As Steve says, Premiere Elements will ONLY Capture via FireWire (IEEE-1394a).
The Pinnacle hardware should have come with some version of Pinnacle Studio (maybe a stripped down version?), and that should work.
If at all possible, when using that sotfware to do the Capture, be sure to choose DV-AVI as the file format/CODEC. That material will Import perfectly into PrE, and edit smoothly.
Do NOT choose MPEG (any flavor), or AVI w/ any other CODEC, but DV/DVC, such as Xvid, or DivX. Those WILL create issues down the road.
Good luck,
Hunt

High FPS Video performance issue. Premier Pro CC.

Hello, I have been working on this project.
The recording I used are recorded with Nvidia Shadowplay at Max bitrate (50 mbps and H.264) and 60 FPS.
Now I did record the game Counter Strike: GO. And while recording the time scale was set to 1/4. So in Premier Pro I accelerated the recording by 400% to get back to real time. Which makes the videos effectively 240 fps Full-HD recordings.
Now I used the short-cut CTRL+SHIFT+F11, to see my CUDA's rendering information.
At first it plays a smooth target 60 fps, but it doesn't take long for it to go down to 3-6 fps. Which is simply impossible to work with.
Now my question is, can I tell Premier Pro to only render at say 60 or 50 fps? Basically let it skip frames in order to maintain at least 24 fps for the view port editing purposes?
Final render of the project is targeted at 60 FPS for YouTube.
Sincerely, Julian Blau
My gear:
Intel i7-920 (OC to 3.9 GHz)
Nvidia GTX 680 (MSI TwinFrozr)
Samsung 840 SSD for cache in Premier Pro's Media Settings.
Media is stored on a Regular HDD (600 GB)

I am having the same issues.
Im working on a late 2012 iMac, 3.4 GHz Intel Core i7. 32 Gb ram, NVIDIA GeForce GTX 680MX, OS X 10.9.4.
I'm editing RED footage, about 3 TB worth for this project from a Promise Pegasus drive.
The software really slows down when using the TYPE tool and also when scrubbing through footage.
When I attempt to quite the software and restart, the interface goes away but the app is still running but says "not responding" when I attempt to force quit.
If you've figured it out since then Id love to know what works.
Thanks!
G

Video Capture issues in Premire Pro CS3

Similar Messages

Maybe you are looking for