Video capture with Sat Pro M70: What ports and leads can I use?

I want to edit my home movies on my Sat Pro M70 using WXP Pro (win dvd or movie maker). I want to capture the video from my panasonic camcorder which has digital tapes. what ports can I use and what leads do I need? I am desperate to edit my recent wedding video to put onto DVD and post to my mum. The panasonic website has been ignoring me! Any advice anyone ??

Well, as far as I know this unit has only an S-video out port. In this case you can connect the notebook to the TV and watch the picture from notebook on TV but its not possible to receive any signals from TV or any other device on notebook.
To receive the signals you need a composite port or an s-video in port.
However, if the camcorder has a firewire port so you can send the digital files thru the firewire connection. But this should only works with digital files which are saved on the camcorder.
Please also check these useful sites:
http://www.camcorderinfo.com/content/connecting_cam_to_computer.htm
http://www.educ.ttu.edu/howto/Vid_Room250_Connections/vid_connections.html

Similar Messages

What brands and type can I use for my iMac 20" internal Hard Drive?

what brands and type can I use for my iMac 20" aluminium internal Hard Drive?
can I use WD caviar black?
is it too hot?

If you are replacing the drive because the existing one is faulty, that's one thing. If you just want more space, you should take advantage of having a decently fast and relatively small capacity drive in there now (instead of a huge drive). Get an external FireWire drive and off-load most of your user data there. Make your internal drive dedicated to mostly your OS and app files, with plenty of free space. That setup will make your iMac run more efficiently. I won't go into more detail, because I'm not answered your specific question... You can post back with any questions, if interested...
To answer your questions...
You should be able to use any SATA 3.5-inch drive internally, but you should probably keep it at or under 1TB. The main concerns are power usage and heat dissipation. A drive like the WD Caviar Green would be ideal in terms of power and heat, but they do have slower (or variable) spin rate. I have one as an external drive (750GB) and it is amazingly quiet and cool. If I had to replace the internal drive because the current drive failed, I'd put it inside. I'll trade a bit of pure performance for the efficiency (including low noise), and these drives are more advanced with higher data density and larger cache, so the trade-off from slower spin rate may not be so bad.
You can check your current drive's model number (which is shown in System Profiler) to get the specs online. The stock drive in my old +Late 2006+ iMac is a 7200 RPM drive. The Caviar Black is a 7200 RPM drive, with a newer design. So if you want to use a Caviar Black in there, I think it would be OK.

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

What port and location to be used in composite.xml

I am trying to use the port and location of a service which is not deployed due to enviornment set up problem. So, now I have set the port and location as null. Can I use some value to compile my composite.

You can definitely compile your composite.
Inside "reference" tag of your composite, there would be another tag with the name "binding.ws", which would have two attributes - port and location.
You can give value for port attribute and compile your composite.
This value would be something of this format : <port target Namespace>#wsdl.endpoint(<service name attr>/<port name attr>)
Hope it helps.
Puneet.

What ports and protocol does Pacman use?

I need to know it to configure the firewall. Ah, by the way, I'm using Guarddog, that's a nice tool, I'd like to recommend it.

ftp, but you have to let the machine resolving hosts (DNS), too
(there is one mirror, that is http, i think, but this is one of 7 or 8 and not the first, so dont worry)

What free anti virus can I use without disabling City of Wonder game

Firefox updated me to Firefox 5, but when doing so it would not allow either of my free anti viruses AVG 2011, nor Avast anti virus
to run on Firefox 5 without disabling my City of wonder Game, and said these anti viruses were not compatible with Firefox 5.
What free anti virus can I use on my Home computer that will allow me to have protection on my p.c. w/out disabling these features?

Firefox updated me to Firefox 5, but when doing so it would not allow either of my free anti viruses AVG 2011, nor Avast anti virus
to run on Firefox 5 without disabling my City of wonder Game, and said these anti viruses were not compatible with Firefox 5.
What free anti virus can I use on my Home computer that will allow me to have protection on my p.c. w/out disabling these features?

I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac, editing in imovie and burning on idvd. The picture quality is awful. What can I do?????

I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac then editing in imovie and burning dvd-r using idvd. The picture quality is awful. What can I do??????

At what point is the video quality bad? Is it bad on capture? I would recommend using an s-video 1394 firewire converter instead. They capture the video at a higher bit rate. If you have a lot of 8mm tapes to capture, invest in a stand alone DVD recorder. They capture and compress in one shot. If you need to rip it back from the DVD into iMovie again, I would recommend using DVDxDV.

Can I use Elgato VHS Video Capture with my Macbook pro?

Can I use Elgato VHS Video Capture with my Macbook Pro? It comes with a CD on which is the software. My Macbook pro does not have a CD drive. how do i get the software?

Elgato provides a download link to their latest Video Capture software v1.1.5. Supposedly runs on Snow Leopard and later. They recommend Yosemite.

Sat Pro M70-113: Express Card slot - What for?

Hi,
can anybody tell me what is the use of express card slot on my sat pro m70-113,like what hardware can i connect to it for expansion..
Thanks..
Message was edited by: ashishsoni

Hi
This new expansion Express Card slot for notebooks has two sizes: Express Card/34 and Express Card/54, whose widths will be 34 mm (1/8) and 54 mm, respectively. Both are 75 mm long and 5 mm thick. The idea is the same of the PCCard, only that by using serial communication instead the parallel one, it uses less pins (only 26 pins, against 68 pins in the PC Card) and that permits the manufacture of smaller expansion boards.
Bye

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

Satellite Pro M70 - What is the Bluetooth module part number

Could someone who has a Toshiba Satellite Pro M70, with bluetooth, tell me the part number of the bluetooth module please?
You can reed it from one of the labels under your notebook. You can read bluetooth in it, the part number is in the up left side of the label, and it will be something like this: PA3418U-BTM.
Thanks.

Hi
Why you dont make a call to the authorized service partner in your country and would order an compatible BT module for your notebook?
In my opinion this would be the easiest way to get one.
Unfortunately Im not owner of Sat Pro M70 and therefore I dont know the BT part number. But my A210 has been equipped with an internal BT module and the part number is PA3608U-1BTM
Greets

HT1343 On my 4 1/2 year old Macbook I could select multiple files by highlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

ghlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

Holding down the control key will invoke "right-click."
Depending on the View, holding down Shift will with either toggle the selection (Icon View), or it will make a continuous selection from the previous selection (List View or Column View).
The only way to make a continuous selection in Icon View is to drag out a selection marquee around or through the icons.
I can't remember the behavior of previous OS's.

Capturing with QuickTime Pro?

I have much problems with capturing in FCE: missing frames, out of sync audio, one cassette ok - the second with problems.
Now I capture with QuickTime Pro and import in FCE.
Is this procedure ok?

Excuse me, I forgot: several miniDV cassettes from two different cameras. The camera I use for capturing is yet another (Medion MD 9090) camera.
With iMovie there is no problem to capture but I have learned this is not the right way.
With QuickTime Pro there is also no problem, so I use it now.
Can there any problems using QTP for capturing instead of using FCE?

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

What Internal hard drive can I use to upgrade my macbook pro 2010

what Internal hard drive can I use to upgrade my macbook pro 2010

You may use any 2.5" SATA notebook drive not higher than 12.5 mm that uses either 1.5 or 3.0 Gb/s interface. Visit OWC for available options and prices.

Video capture with Sat Pro M70: What ports and leads can I use?

Similar Messages

Maybe you are looking for