Video Card driver not working on Windows

Hi,
I just finished installing Windows 7 through bootcamp just for Microsoft Flight Sim X. I used bootcamp to burn a disc with the updates and drivers and installed it. When I try to start the flight sim, I get: "Flight simulator is not working with your video card. Veryify you have the latest drivers installed for your video card."
Any suggestions?
Thanks,
Glen

64-bit is much much better handling today's system with the RAM graphic card memory and the rest.
If not that I would have gone with 8 RP 64-bit as well which includes support for USB3, multiple monitors is much much better, and better self recovery and repair too, and feels like it has been tuned and optimized better than 7 performance wise.
I don't see much use for 32-bit OS except on small 2-3GB systems and tablets.

Similar Messages

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HP deskjet D2300 series driver not working in windows 7

This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
My problem remains unsolved.

Hi dvh,
Welcome to the HP Forums!
I see that your HP Deskjet D2300 series driver not working in windows 7.
Do you see any error messages with the installer? Or does it just close out and doesn't install?
In the meantime, please try using our HP Printer Install Wizard for Windows.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

i lost my Mac OSX dvd...

V570 video driver not working with windows 7 home premium 64 bit

i have tried many ties instaling the video card driver from the lenovo support site for my v570, after install and reboot , blue dump screen appears and i've to restore the windows. so far i'm running without the vga driver. someone pls help to resolve this issue

I have been battling with this issue as well for several weeks now. I have gone as far as to try Windows 7 professional 64-bit, downloading the driver from numerous locations, reformatting the computer several times, and attempting to install it on an SSD as well as a standard hard drive. I finally decided to call Lenovo and just got off the phone with them... At first, the representative advised me that it was because I installed Windows professional 64-bit instead of the home premium version that came with the computer. I advised them that I was not willing to except that answer and that I disagreed with it (not to mention that at one point had it up and running with Windows 7 64-bit professional). The following response that I was given is to pay either $179 for ongoing support or to pay $90 for a one-time support issue. This is unbelievably frustrating the computer is not even six months old, I have never run into issues like this before, and let's just say this isn't my first barbecue so I know what I'm doing. Simply out of principle, I am now considering getting rid of this thing and going back to Asus... So tired of dealing with this garbage.

Satellite L30 (PLS33) - wireless card driver not working

Hello,
I have a problem with wireless card. I need a driver, but original driver (from Toshiba site) is not working.
Please, give me adress working driver.

Check this:
http://aps2.toshiba-tro.de/wlan/
By the way; All WLan drivers work!!!! But dont wonder if you use not correct driver for the Wlan card!!!
Check your WLan card and use the right one!

Bluetooth driver not working on Windows 10

Hello everyone, I upgraded my PC from Windows 8.1 to Windows 10 today. Everything else is working fine but the bluetooth driver seems to be incompatible. I had the 'Mediatek (Ralink) bluetooth software driver for Windows 8.1' installed earlier, which doesn't work with Windows 10. I checked with the Ralink website and the HP driver support but didn't find anything as yet. My question is, will the driver for Windows 10 be made available soon?thanks

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-n010tx Notebook and issue with drivers for Bluetooth and Windows 10. Here is troubleshooting when drivers are not available yet. Have you tried in the Device Manager to update the driver that is currently installed? In the device manager try selecting find new hardware.
Here is a link to the HP Support Assistant if you need it. It has a Wireless support assistant inside it that might help you. The updated drivers will be posted as available. We are seeing them update regularly. I would check back to your drivers page. I hope this helps. Thanks.

Satellite C650D-113 - WiFi driver not working on Windows XP

The wifi-driver downloadable from Toshibas site is not working it seems, it installs as if it's all correct, removing the yellow exclamation mark from the device manage. But the "wireless network connection" icon that is supposed to appear in the network connections folder does not appear and this is where I am stuck.
Or maybe it wasnt the driver, downloaded and installed the wireless lan client manager because there were no specific "wifi driver" to download.

Yep, checked the fn+f8 before posting, and it's on. A new problem has arisen now aswell, the audio driver won't install with the message "ERROR: driver installation failed: could not find the MEDIA device for this driver." What gives?
Edit: Allright, the driver from the link given worked, awesome, thanks! Only sound left that needs to work and I'm set. :)
Message was edited by: linusb_89

ThinkPad T510: eSata External Hard Drive Not Working with Windows 7...

Hey folks,
My LaCie Quadra 1TB drive arrived on Monday and the Quadra disconnects 1 minute into any copy / move function using the eSata connection. The USB 2.0 connection works just fine, however, I invested the extra money in a Quadra specifically to take advantage of eSata connection and would like to get this working.
I received the following from LaCie support:
"...the issue with eSATA and large or small drives on Windows 7 is a known issue. However, it is not limited to LaCie drives and we believe this to be a Windows 7 driver issue from Microsoft... using a third party eSATA card with its own drivers does eliminate the issue."
So, before I spend another £50 on an eSata ExpressCard trying to fix something that should work out of the box:
Any idea how to get my eSata drive working on my ThinkPad T510 or ThinkPad Mini Dock Plus Series 3?
Does the ThinkPad Mini Dock Plus Series 3 eSata connector have its own drivers, as this - ideally - is where I'd like my external drive to be permanenelty connected.
Kind regards,
John Diddy

Hi Bananaman,
Nope. tried a new eSATA cable and the issues are exactly the same.
LaCie recommend an ExpressCard with it's own drivers to resolve the problem. Trying to avoid this route as I intend to use the drive for regular backups and running virtual machines so it'll be used heavily and I'd rather not have a cable sticking out of the side instead of the docking station!
Any further thoughts?

XtremeGamer driver not working with Windows 7

I recently upgraded to Windows 7 and I can't get my XtremeGamer sound card to work. I've installed the latest drivers listed on your site and I still don't get any sound. Any thoughts as to what might be causing this problem? I've used the update manager to ensure my driver is fully up-to-date.

I have been battling with this issue as well for several weeks now. I have gone as far as to try Windows 7 professional 64-bit, downloading the driver from numerous locations, reformatting the computer several times, and attempting to install it on an SSD as well as a standard hard drive. I finally decided to call Lenovo and just got off the phone with them... At first, the representative advised me that it was because I installed Windows professional 64-bit instead of the home premium version that came with the computer. I advised them that I was not willing to except that answer and that I disagreed with it (not to mention that at one point had it up and running with Windows 7 64-bit professional). The following response that I was given is to pay either $179 for ongoing support or to pay $90 for a one-time support issue. This is unbelievably frustrating the computer is not even six months old, I have never run into issues like this before, and let's just say this isn't my first barbecue so I know what I'm doing. Simply out of principle, I am now considering getting rid of this thing and going back to Asus... So tired of dealing with this garbage.

Touchscreen driver not working under Windows 8

Installing Windows 8 on HP Touchsmart 520 is really a nightmare. The installation procedure of display driver and Voltron Touchscreen drivers usually produces error 9998. Weirdly, I succeeded in somehow working around this by using a different display driver (some beta-version from Intel), but this was buggy. Since reinstallation of Win 8 I cannot get the Touchscreen driver to install anymore. Given the fact that the Touchsmart series is selling on its Touchscreen capabilities and given the fact that HP relies on Microsoft OS it is not only mildly irritating that HP has so far not been able to supply device drivers that work well with Win 8 Release Preview. Which solution do you suggest ? Wait ? Go back to Win 7 ?
This question was solved.
View Solution.

Sure, thanks anyway. HP sucks.

DVD drive not working with Windows?

Hi, I have a 20" Intel Core Duo iMac running Windows XP SP2 via Bootcamp.
I tried burning a homemade DVD last night using several programs (Nero and DVD Shrink to be specific) and I was not able to choose the DVD drive as the target.
When I open My Computer, it shows as a CD Drive?
I know it at least reads DVD's because I've installed a few things using DVD's. And on Mac OSX it both reads and writes DVD's because I've backed up my stuff on a DVD-R before installing Bootcamp.
So it appears that it just isn't writing DVD's on Windows XP.
Is this a common problem or is anyone else having similar troubles?
Thanks in advance.

Hi
I have the same problem with mine which is why I am searching this forum.
Were you ever able to resolve this?
Thanks

Dvd drive not working in windows

Hi just a question when I boot Windows Xp to my mac the DVD drive cant read files when i enter the cds but if i boot it in apple it can read the files tried to reformat it work for a while but then after few more use it cant read the files when im in windows mode help need a solution
thnks
greg

Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
Your system info confirms you have the BETA OS 10.0 installed. No G5 iMac came installed with that OS.
Also, if you have Windows XP installed, more than likely you have an Intel iMac. If this is the case, you should be posting over in the Using DVDs and CDs with your *Intel-based* iMac Forums.

CD DVD DRIVE NOT WORKING ON WINDOWS 10

Since downloading Windows 10 my cd/dvd drive is not showing up in device manager. Went in to BIOS and its there ,but no where else

When asking this question, you can be better served IF you would mention the exact computer model. With this info, it's possible to research whether a driver exists. As noted here the rollout of WIN10 still has drivers issues. That's not to degrade the product, but it does happen.

Video Card driver not working on Windows

Similar Messages

Maybe you are looking for