Video card to run 2nd and 3rd monitors cs5.5

Hello all,
I have a powerful system with multiple hard drives that I use to cut HD DSLR footage on in CS5.5. My GTX 570 runs my 1st monitor and my 9600GT runs the 2nd and 3rd monitors with great success.
1st monitor = timeline
2nd = bins
3rd = full screen preview (Highest quality preview)
The reason I use the gtx 570 to run only the first monitor is because it idles much higher and hotter connected to two monitors. (Disables the down clocking feature on the card when connected to multiple displays).
Well the 9600gt has died.
I don't want to spend alot of money here but I am not sure what video card I require for my 2nd and 3rd monitors. Keep in mind the 3rd monitor is the full screen preview.
I know premiere pro uses my 570gtx for the MPE but I have no idea how this effects (if it does at all) my 3rd preview monitor since I have had it plugged into my 9600gt.
There for I am not sure if I can get away with a cheap card like a $50.00 Nvidia GT 610 or do I need something at least equal or greater then my old 9600gt?
Thanks!,
Kieran

Thank you for the reply Harm. I have an x79 board with a 3930k @ 4.6ghz.
I will take that advice on board.. I might have to fork out a bit of extra money. Shame I only purchased the 570 gtx a couple of months ago!
Found this card....
Gainward GTX550Ti 1G DDR5 DVI HDMI
Internet Price:    $111.00
Barcode :
426018336-2050
GPU :
GeForce GTX 550 Ti
GPU Clockspeed :
900 Mhz
Memory :
1024MB GDDR5 192bits
Memory Clockspeed :
2050 Mhz
Pixels per clock (peak) :
N/A
Bandwidth :
98.4 GB/s
Ramdac :
400 MHz
PCI-Express 2.0
Cooling :
2-Slot Fan
Video-Features :
HDMI
Connectivity :
DVI-I + VGA
Would this be sufficient??
Thanks!!
Kieran

Similar Messages

Dunning 2nd and 3rd letter

Hi SAP Guru
How i can get Dunning 2nd and 3rd letters
I have getten dunning 1st letter but i am not able to get sencond and 3rd
what is the process , Thank you in advance

Hi,
Line items should reach minimum number of days, referring to the due date of net payment, to reach a certain dunning level.
In FBMP check you dunning interval. If line item has reached interval maintained for 2rd and 3rd level then items will not be dunned.
Also check dunning levels for your dunning procedure in FBMP.
If you find no problem with dunning settings then, activate additional log for the dunning run to identify exact reason for the problem.
Thanks!
Raju

Apple TV (2nd and 3rd Generation) - Home Sharing Not Working but Airplay Does

Hi everyone,
This has been a bit of a ongoing problem, so I'll provide a bit of background.
I am running a Mac Mini (Late 2012) Running Yosemite 10.10.1 as a media server running 10TB of Movies, TV Shows and Music off a NAS Drive. Running iTunes 12.0.1.26. Main hard drive is a 256GB SSD.
I also have 5 Apple TV's in the house, 2 are 3rd Generation (running iOS 7.0.2), 3 are 2nd Generation (running iOS 6.2.1).
The goal is to watch the TV Shows and Music through Home Sharing.
Home sharing works perfectly through the 3rd Generation Apple TV's, as does Airplay. I never have a problem with these. Mac Mini (or any other device for that manner) has no issues accessing the NAS.
The 2nd Generation Apple TV's are a continual source of frustration. They are connected to the network, can access the iTunes store, can accept Airplay signals from the Mac Mini, iPads, iPhones, etc. Can even detect the other (2nd and 3rd Gen Apple TV's). But frequently, when I try and connect to Home Sharing, I receive the error message "Cannot connect to Home Sharing", even though if I jump on the Mac Mini, I can airplay the content to that Apple TV just fine.
Is this just a 2nd Generation Apple TV Issue (to make us go an upgrade all our Apple TV's to 3rd Generation)?
I have completed the following troubleshooting steps, to no success.
1) Reset the Apple TV's (Multiple Times)
2) Sign out of Home Sharing\iCloud\iTunes Account, reset, and sign back in.
3) Restore the Apple TV to the latest firmware and set up again.
4) Test the device on Wireless and Wired Network.
5) Reset all network infrastructure.
6) Power Cycle the Apple TV's for 15 minutes.
7) Reset iTunes.
8) Sign out of Home Sharing\iCloud\iTunes Account in iTunes, Reset the Mac Mini, and Sign back in.
9) Reinstall iTunes.
10) Reset the Mac Mini and NAS.
11) Reformat the Mac Mini and update to latest operating system (Mac OS X Yosemite 10.10.1).
12) Try home sharing from a Windows PC (Windows 8.1, x64).
Literally out of ideas. Am I chasing a Unicorn on this one? Would love some help.
Thanks!

Good to know your Apple IDs are fine.
So I've been experimenting with de-authorizing and re-authorizing computers and devices and the symptoms you are experiencing are reminiscent of devices and computers unable to authenticate with Apple's servers.
What I would do is try de-authorizing and re-authorizing computers and devices to see if things return to normal. Start with the computers first. You can quickly de-authorize the computers by logging in to your iTunes Store account and using the 'Deauthorize All' button. After clicking the button wait a few minutes for it to propagate. You will know that the computers have been de-authorize when the Account Information page says "0 computers are authorized to play content purchased with this Apple ID." Other devices like Apple TV and iPads and such do not count on that list.
Once de-authorized, re-authorize them from the 'Store' menu in the iTunes app. You will know all three computers have been re-authorized when the Account Information page says "3 computers are authorized to play content purchased with this Apple ID." Now try and play your content with Apple TV. If it still doesn't work turn Home Sharing off on the Apple TV and then re-enable it using your Apple ID.
Hopefully this brings back your Home Sharing functionality.

Adding a 2nd and 3rd Drive

I just added a 2nd and 3rd ata drive to my 450 MHZ tower. The motherboard had an open plug that said ata.
I plugged in the cord (strip) that came with the drive into the board and into the additional hard drives.
(fyi) I took both hard drives and strip from a working unix server.
I plugged in power to each.
I started up the mac. It shows the 1st drive on the desktop, but no others. Disk utility doesn't see the new drives either.
What did I miss?
Any help would be greatly appreciated. Thanks.
PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI
PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI

Hi omoriginals ,
Welcome to the Discussions.
Your computer can only mount two drives unless you add another ATA controller card in an empty PCI slot. There's one bus that has the ability to control two drives.
The additional drive and cable you installed will need to be removed. The other that you attached to the existing data cable needs to have its jumper set to "slave" and then attach it to the center position on the cable. The jumpers are small plastic and metal blocks that connect two pins located next to where the data cable attaches to the drive. There should be a diagram on the drive for the settings. Just set it, reinstall then format it with Disk Utility (in your Utilities folder).
John

What's the difference between 2nd and 3rd generation

PLEASE HELP! New Apple user and looking to purchase a used 2nd or 3rd generation ipod touch.
what's the difference between 2nd and 3rd generation?
apparently I am told that the 2nd gen does not have the capabilities of listening without headphone? and the 3rd gen does??

Hi maximumslowness - (great name),
The 2nd gen Touch has one internal speaker, so you can listen to it, (both left and right channels) without headphones.
However - it's a small single speaker and it is not very loud. It's not designed for quality listening (neither is the speaker on the 3rd gen as far as I know) and probably will not be adequate if there is a lot of background noise nearby.
One option is to drop the iPod (not literally!) into an iPod Docking station so that the sound can play out through a self-contained mains-powered amplified speaker, which will also charge your iPod. There are many on the market. On the bottom of the iPod is the 30-pin dock connector which can be used to feed the audio to a docking station. Another option is simply to use a cable to connect from the headphone socket to the audio input on any amplifier.
Yet another is to plug in a small fold-up style speakers, such as
http://www.amazon.co.uk/Portable-Folding-Speakers-iPods-Players/dp/B000A1QKNU/re f=sr_1_84?ie=UTF8&qid=1332326622&sr=8-84
or http://www.amazon.co.uk/Generation-Capsule-iPhone-Laptop-Speaker/dp/B002XNO7FQ/r ef=sr_1_6?ie=UTF8&qid=1332326656&sr=8-6
I've no idea how good the sound is, you'll have to judge that for yourself. The links are both to a UK store, but most countries will have a similar option.
I do not recieve any form of payment or compensatiion for the above links.
Message was edited by: the fiend

375o switch in stack, only 2nd and 3rd switch reboots

Hi,
In customer place we are having three 3750 switch and it was stacked and working fine. Few days back the in stacked switches 2nd and 3rd switches are rebooted continuously and found in the show version command as: Data TLB Miss Exception (0x1100)!.
From last 4 days we are not found any reboot. Please let us know any software bug is triggered to cause this problem, if upgraded please let us know the image to be put in all the three switches. I am sending the show tech output of all the 3 switches and show stack output.
Thanks in advance.
Regards,
Ram

This URL should help you:
http://www.cisco.com/en/US/products/hw/switches/ps5023/prod_release_note09186a00801b476a.html

Itunes 7.5 freeze between 2nd and 3rd song playback of CD

Good Evening!
I am experiencing a problem with my itunes 7.5 freezing playback of a CD between the 2nd and 3rd songs of the disc in normal playback mode. What happens is that the 2nd song completes...transitions to the third song....plays a few seconds of the third while still displaying the info and time of the 2nd song and then freezes.....a spinning disc is displayed.....I am forced to force quit itunes.
I am at a loss to determine the root of this problem and turn to you fine folk for any advice in rectifying this issue. Thanks in advance for any and all advice.
Green Miler

This post is in the wrong topic!!!

Does the Ipad 2 3rd generation have the two cameras? What is the difference between the Ipad 2 , 2nd and 3rd generation?

Does the Ipad 2 3rd generation have the two cameras? What is the difference between the Ipad 2 , 2nd and 3rd generation?

All iPads have the camera except the very first generation. You can only buy an iPad2, the new iPad (4th gen) and the iPad Mini now. You can compare for yourself.
http://www.apple.com/ipad/compare/

On the 2nd and 3rd page of my ipod touch, none of the apps work You touch the screen and it starts to go, the doesnt. This started today. I've reset the ipod, but still not working.

On the 2nd and 3rd page of my ipod touch, none of the apps.work. When you touch the screen, they start to "go" then return. This started today. I have reset the ipod, but this still happens. What do I do now?

Ahh, looks like I remembered correctly
To the OP:
This is directly from the KB article lllaass linked to:
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.

I have a p6240f. what video card will run battlefield 3 and run on my cpu.

i have a p6240f. what do i need to do to run battlefield 3 and mw3

Hi,
You might want to review the system requirements for Battlefield 3. I don't believe that MW3 is on the market yet although it can be preordered.
You will also need to upgrade the power supply.
As for a video card, I would recommend the AMD Radeon 6850. It's $130 after rebate. The Corsair CX500 is a quality power supply priced at $40 after rebate.
These are the motherboard specifications for your PC. The slot adjacet to the PCI-E x16 slot needs to be vacant.
These HP "how-to" articles should be helpful with the hardware installations.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I have an original IPhone that can't connect to ITunes. I did a factory reset and restored to firmware version 3.1.3. Please note that both my ITouches (2nd and 3rd gen) sync to ITunes perfectly. However, the IPhone never connects. Thoughts?

OK, my original iphone has just completed a factory restore. It's connected to my laptop, and ITunes restored it to firmware 3.1.3. Now, I can't connect to the ITunes store. I get an error message every time stating connection timed out, or something to that effect. Well, both my IPod Touch 2nd gen and 3rd gen connect perfectly to ITunes, so I doubt it's related to proxy settings, firewalls, or anything of the sort (believe me, I've spend 15 hours researching this without an answer). So, is there a problem with the original iphone with version 3.1.3 syncing with ITunes version 10.5.1 (the most recent one)?
I would LOVE an answer as this is driving me crazy.
Thanks.

Mine had a SIM in it. Originally, when I took out the SIM and tried to restore it with nothing in it, it wouldn't work without a SIM card. So ... I took the SIM that was in that phone previously, put it back in and completed the system restore. I then proceeded to go through the process with AT&T of adding a data plan, which I did, and then it successfully completed the system restore. However, now if I run diagnostics on it, it will not verify ITunes Store. If I try to connect to ITunes store, I'll get the network connection timed out error I referenced earlier in this thread. I'm considering jailbreaking it and putting on an earlier software version. Your thoughts?

Does GeForce 7350LE video card fan run all the time or at certain temperatures?

I have a HP Pavilion m8147c Media Center with AMD Atlon 64 X2 Dual Core Processor 5600+ 2.80 GHz 3GB Ram and when running lately the monitor has started to go into sleep mode or something.Sometimes there is a warning that says something like no signal from DVI and one more but doesn't stay on long enough to read it all.I am running Vista Home Premium 32 bit.I had just installed a new game but pretty sure that has nothing to do with it as I used System Restore and backed up to a time before it was installed.At first it was only when playing games but now it happens with hardly anything running.This pc was bought in july 2007 and I have another desktop but I let my wife use one and I use the other.I opened the case and cleaned out all the dust but noticed when I started it up again the fan is not running on the video card.I don't know if it comes on at certain temps or runs all the time but I feel this is the problem.It has been on for about an hour and not come on at all.Any information will be appreciated.
This question was solved.
View Solution.

captna wrote: Thanks Hanspuppa for the help you've given.I have two more questions.Why do I need the NVIDEA drivers when I will be installing a GIGABYTE card,and the Memory Interface on both cards is 64 bit,how does that affect a 32 bit Vista operating system?Just curious as I have never had any dealings with a video/graphics card before and I would think that it should be a 32 bit but since the GeForce 7350LE is also 64 bit it obviously works..I really appreciate the links and I am ordering the card now,thanks again you.For some reason I am not getting email notices when you reply but I am checking back every so often to see.
Hello captna, Usually when you purchase a new video card or other hardware device, the drivers that are included on the CD are an older version, sometimes as much as six months old. The chipset on any Brand of a given model would be either an Nvidia or an AMD ATI.
The chipset is the main component of the video card that controls most of the operations of the video card.
Since all the manufacturers of the Nvidia video cards use the chipset purchased from Nvidia, they are all the same chipset for any particular model. The different manufacturers can and do add or enable features for their particular cards, but the chipset is still the same.
Since the drivers from the manufacturer would be an older version, and Nvidia releases new versions quite often, it would be best to use the Nvidia drivers, since they would have updated fixes and sometimes features, and added support for some newer cards.
Your reference to the Memory Interface on both cards is 64 bit, has nothing to do with your version of the operating system. It just relates to the way, and speed of the interaction of the video card with the system (buss).
The higher the number of the Memory Interface, the more data that can be moved in and out of the video card, which results in a faster video performance. This just becomes important when playing games for the most part.
Using the system just for web surfing, emailing and some light gaming, would not have that much effect on the system.
More important to the system would be the amount of video card onboard memory. The Gigabyte has 1 GB of onboard memory compared to your original video card with 128 MBs of memory. This additional memory would likely show a slight performance increase in any light gaming.
You want see much, if any difference in the performance of your system, with the exception of perhaps the light gaming performance increase, with the new Gigabyte video card over the GeForce 7350LE. You should not experience the heat related issue as you had with the faulty fan on the GeForce 7350LE.
You can go into your personal settings on the Forum and select to not receive the email notices when someone responds to one of your post. Several years ago while on the Dell Community Forum, I would receive over a hundred emails every day until I disabled this feature.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

G4 MDD Dual 1.25 - Aperture 2 - Do I need newer Video Card to run the app?

I am hoping someone can help steer me in the right direction. I spent all morning reading about Aperture 2, decided I must have it, downloaded the trial version and THEN found out my computer will not run it. When I try to install it, it says that I don't meet the minimum requirements but doesn't specify exactly what the problem is. The Aperture minimum requirements are confusing to me in that it says Power Mac G5 with Intel processor, BUT it says you can have a G4 Powerbook with a 1.25 GHz processor. My Powermac G4 has a 1.25 processor. Not sure if that is the problem or if it's my video card which is the standard ATI Radeon 9000 Pro. If I replace my video card will I be able to run Aperture 2? If so, which ones would be compatible with my older Mac? — Thanks, mark
I have pasted my specs below:
*Hardware Overview:*
Model Name: Power Mac G4
Model Identifier: PowerMac3,6
Processor Name: PowerPC G4 (3.2)
Processor Speed: 1.25 GHz
Number Of CPUs: 2
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.4.8f2
*ATI Radeon 9000 Pro:*
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99703-127
Displays:
Apple Cinema Display:
Resolution: 1600 x 1000

Aperture 2 - Apple Store (U.S.)
Look down below at the:
Recommended Configuration
Does not look too good for you....
The ATI 9000 is pretty minimal...

Lenovo Ideacentre K410 won't boot with video card after OS crash and refresh

I purchased a Lenovo Ideacentre K410 from Fry's some time ago. It came with Windows 8. I added a GeForceGTX650. Everything ran fine until yesterday, when the system black-screened in the middle of a Windows 8 update. The update was running from the control panel. After the black screen, I finally got the system to boot again by removing the video card. Even then it said the OS was messed up and offered to refresh it. I allowed it to refresh the OS. Now Windows 8 boots, but not if I put the video card back in. Thanks!

Hi macaria,
Welcome to Lenovo Community Forums!
It might be that the Video Card is Bad that caused the Crash,
The system prompt you for a repair since it was not turned OFF properly when the computer Crashed.
Have the GPU Card tested on another computer or try a different GPU on your system.
Regards
Solid Cruver

Video card to run 30 inch display for G5 2.5 GHz quad core

I want to purchase the 30 inch HD display for my G5 Quad core 2.5 GHZ machine. Apple states that it needs the nVidia GeForce 6800 card to run. I have the GeForce 6600. Will the 30 inch display run at a lower resolution with this card? If not, could someone recommend a PCI-E card that will? I did find a 6800 GeForce Ultra at Macsales.com but they state it will not run on the quad G5.
Thank you for your time and consideration

Your existing card has two DVI ports. One is single-link and can only run up to a 23". The other is dual-link, and can run a 30" at full resolution.
<http://support.apple.com/specs/powermac/PowerMac_G5_Late2005.html>

Video card to run 2nd and 3rd monitors cs5.5

Similar Messages

Maybe you are looking for