Video cards for 2008 Mac Pro with 4 20 inch Cinema Displays

I have an early 2008 Mac Pro Quad Core with 16GB RAM. I run a 4 (20 inch Mac Cinema Display) monitor configuration off of it. one of my video cards just failed. They were never very good at handling FX in FCP anyway. I want to upgrade and get good cards for 2 displays each and if possible, video cards that will facilitate FCP X as well. What should I get?

OS X has drivers in 10.6.5
It is the ROM firmware that makes it work though there is help there too now for PC cards and flashing.
OWC is over pricing.
100s of threads asking the same question for the last yr.
5870 also, but costs $200 more.
More about using 6870 and others:
netkas.org
PS: the 'short' url for the Apple ATI 5770 w/o any user/cid - Product /MC742ZM/A
http://store.apple.com/us/product/MC742ZM/A
Radeon 5870 vs 5770 GTX 285 4870
ATI Radeon HD 5770 - specs etc

Similar Messages

  • Help with new video card for 2008 mac pro

    I was looking to upgrade the speed of my 2008 Mac Pro Video
    I currently have a nvidea 8800 512mb
    Looking for any suggestions?
    I need something that will not block the 2nd 2.0 pci slot?
    From my understanding my mac has two 2.0 pci slots and one is used by the video card?

    http://www.ebay.com.au/itm/Nvidia-GTX-780-3-GB-for-Apple-Mac-Pro-/331071998403?n ma=true&si=TLQfb78DRSdpDaz0cZAp4FFlvP8%253D&orig_cvip=true&rt=nc&_trksid=p204767 5.l2557
    this Nvidia GTX 780 is the best your mac can handle safely, the card can work on 1 slot at around 95% according to another site:
    http://www.techpowerup.com/reviews/Intel/Ivy_Bridge_PCI-Express_Scaling/3.html
    this is what i plan to use in my mac pro 3,1

  • Basic video card for 2008 Mac Pro?

    An old question, I suppose, but products change....
    The video card in my Early 2008 Mac Pro seems to be flaking out -- hardware crashes and the like.  I'm just using it as a server, and don't need a particularly high end (= expensive) replacement.  Any suggestions?  Thanks!

    "PC cards flashed to Mac Firmware do not show a picture until Mac OS X is fully up and running, so debugging, alternate booting, running Utility DVD or Recovery HD are extremely difficult."
    Grant is right about many flashed cards. Specifically, flashed 5770 and 5870 cards show no EFI boot screens unless you hapen to use a VGA display connected via lower DVI port. Not very handy.
    Many flashed Nvidia cards DO show the boot screens and thus function like a card you bought from Apple store.
    There are now flashed GT120 cards available as well. You need to be certain that you are clear on whether your Mac Pro is EFI64 or EFI32. (Mac Pro 1,1 ad 2,1 are 32, all of the newer ones are EFI64)
    The EFI64 machines have a much better array of options. If you are unclear, it is always better to ask questions before rather than guess, especially if the ad you are looking at seems ambiguous.
    The screens before the desktop shows up are called the "Boot screens" typically and are there due to EFI drivers on card. From desktop on the OSX drivers take over.

  • New Video Cards for 2008 Mac Pros?

    We have three Mac Pros bought in 2008.  It is possible to replace their ATI Radeon HD2600 XT cards with OpenCL-compatibles?  The cards are the only things barring using Final Cut Pro X on the Mac Pros.

    OS X has drivers in 10.6.5
    It is the ROM firmware that makes it work though there is help there too now for PC cards and flashing.
    OWC is over pricing.
    100s of threads asking the same question for the last yr.
    5870 also, but costs $200 more.
    More about using 6870 and others:
    netkas.org
    PS: the 'short' url for the Apple ATI 5770 w/o any user/cid - Product /MC742ZM/A
    http://store.apple.com/us/product/MC742ZM/A
    Radeon 5870 vs 5770 GTX 285 4870
    ATI Radeon HD 5770 - specs etc

  • Installing Airport extreme card for 2008 Mac Pro

    After some searching I finally found which airport extreme card to get for my 2008 Mac Pro that I just purchased recently . According to the the link below in the Apple archives it is part number MB363Z/A. However the link further down in the thread for the instructions on installing the card doesn't seem to work any more. Anyone know where to find another link for some detailed instructions or pics on installing the card. I haven't found any as of yet. I installed the old extreme card in my G5 pretty easily, but this seems a little more involved in the Mac pro from what I've read so far.
    thanks, Craig
    http://discussions.apple.com/thread.jspa?messageID=6563623

    Ok never mind I found the old link seems to work now with detailed pics and instructions. Sounds like it's a bit of a pain but can be done with patience. Just have to get the card now.
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

  • USB3 card for 2008 Mac Pro

    am considering adding USB 3 capability to my 2008 Mac Pro (which still works great ... I had it overhauled last year...)
    I imagine the best way to do this would be a PCI Express card?  I still have two unused slots in the back.
    Can anyone advise which would be be the best card to get?
    I'm currently running Mavericks - currently everything is working, including my four e-SATA ports currently on two PCI-X cards...
    w

    yes! thank you.
    a google search would show lots of options, but for someone like me (who is less savvy than most of the contributors to this discussion board) it's hard to know exactly what card will work with my machine.
    Looking at the Sonnet cards, this one seems like a very good bargain -
    <https://www.google.com/shopping/product/11936350470791125384?q=Allegro+USB+3.0+P CIe&bav=on.2,or.r_cp.r_qf.&bvm=bv.59568121,d.cWc,pv.xjs.s.en_US.1EneOJbgwUk.O&bi w=980&bih=868&tch=1&ech=1&psi=ikrZUv6xAurlsASmpICgCg.1389972106495.5&ei=k0rZUs-N DOKosASy5ICgCg&ved=0CJcEEKYrMAE>
    would this work for me?  the price is less than I expected for real true USB 3.0
    thanks again
    will

  • 2nd graphics card for 2008 Mac Pro 3.1

    I need to connect a third monitor to my 2008 Mac Pro 3.1 - 2.8/8 core - so I can view and control Logic from my vocal booth. I don't want a monster card. Just the bare minimum. The monitor will only be on when I'm recording by myself. I appreciate suggestions and any warnings of pssible problems.
    Thanks for the help.

    ATI Radeon 5770
    http://store.apple.com/us/product/MC742ZM/A
    http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
    http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
    How To Install and Remove Memory Mac Pro
    https://support.apple.com/kb/HT4433
    2x2GB FBDIMM DDR2 667MHz @ $32http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    Hardware Monitor
    http://www.bresink.com/osx/HardwareMonitor.html

  • 2008 Mac Pro and Apple Cinema Display 27"

    Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

    Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
    Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
    http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
    So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

  • Compatible Raid 5 cards for 2008 Mac Pro - Windows bootable

    Hi,
    could someone be so kind and give me a list of Raid 5 controllers (internal connectors) that are compatible with OSX in a 2008 8-core Mac Pro and that is also able to boot into Windows via Bootcamp?
    Thanks!
    Tom

    Once you look at what is sold, limits the list. None of those listed require Windows though. What specs? I don't see any specs. And of course nothing listed are Windows, that would be strange. Why you pasted notebook and iMac graphic adapters... unless Apple is selling FCPX for Windows.
    Forget the GT120 though some use it with FCPX and are okay with it, save a little though I think 5770 has more processing, bandwidth and of course 1GB DDR5.
    support for 6870 PC card is looking like a possible option now, too.
    It is more mainly just 5770 vs 5870. Or Quadro 4000.
    Amazon has PNY Mac Pro edition $790 vs Apple's $1195 for same card
    PNY Quadro 4000 2 GB DDR5 Mac Pro
    When FCX came out we had a couple threads on same topic.
    Apple Graphics Cards
    OSX and Graphics Cards
    Radeon 6870 3DMark 30% gain on 5870
    Flashed PC Radeon HD5870 Mac Pro 2008
    Flashed PC Radeon HD5870 Mac Pro 2008 - dual DVI works
    I include the above for same reason why when the 4870 came out, PC card was 1/2 price and $450 for 5870? really? when XFX and Saffire are under $199.
    Radeon 5870 vs 5770 GTX 285 4870
    Three Video Displays one card
    Display Adapters Needed

  • Which New Graphic Card For 2008 Mac Pro?

    I'm going to buy Final Cut X, so I'll need a new graphic card for my 2008 MacPro. My current card is an ATI Radeon HD 2600.
    I asked AppleCare and they sent me a link to a lot of compatible cards (copied below).
    But it turns out that most of these cards need Windows - at least according to specs - and the rest don't have the (2) DVI-D connections I need - so which card should I buy?
    The card has to work with my 2 Acer P243W 24" screens at 1920 x 1200 @ 60 Hz.
    Here's Apple's list:
    •    NVIDIA
    o    GeForce 320M
    o    GeForce GT 330M
    o    GeForce 9400M
    o    GeForce 9600M GT
    o    GeForce 8600M GT  Note: OpenCL compatible, but does not meet system requirements for Final Cut Pro X, Motion 5 and Compressor.
    o    GeForce GT 120
    o    GeForce GT 130
    o    GeForce GTX 285
    o    GeForce 8800 GT
    o    GeForce 8800 GS
    o    Quadro FX 4800
    o    Quadro FX5600
    •    ATI
    o    Radeon HD 4670
    o    Radeon HD 4850
    o    Radeon HD 4870
    o    Radeon HD 5670
    o    Radeon HD 5750
    o    Radeon HD 5770

    Once you look at what is sold, limits the list. None of those listed require Windows though. What specs? I don't see any specs. And of course nothing listed are Windows, that would be strange. Why you pasted notebook and iMac graphic adapters... unless Apple is selling FCPX for Windows.
    Forget the GT120 though some use it with FCPX and are okay with it, save a little though I think 5770 has more processing, bandwidth and of course 1GB DDR5.
    support for 6870 PC card is looking like a possible option now, too.
    It is more mainly just 5770 vs 5870. Or Quadro 4000.
    Amazon has PNY Mac Pro edition $790 vs Apple's $1195 for same card
    PNY Quadro 4000 2 GB DDR5 Mac Pro
    When FCX came out we had a couple threads on same topic.
    Apple Graphics Cards
    OSX and Graphics Cards
    Radeon 6870 3DMark 30% gain on 5870
    Flashed PC Radeon HD5870 Mac Pro 2008
    Flashed PC Radeon HD5870 Mac Pro 2008 - dual DVI works
    I include the above for same reason why when the 4870 came out, PC card was 1/2 price and $450 for 5870? really? when XFX and Saffire are under $199.
    Radeon 5870 vs 5770 GTX 285 4870
    Three Video Displays one card
    Display Adapters Needed

  • Top two best video cards for older Mac Pros?

    I have some older Mac Pro towers that vary from:
    2.66 GHz Quad Core Intel Xeon
    ..to this:
    2 x 2.93 GHz 6 Core Intel Xeon
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME. I just need to narrow down the unwieldy list that can be found here: http://www.adobe.com/products/premiere/tech-specs.html

    MikeJamesG wrote:
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME.
    Are you adverse to using aftermarket cards that have been converted to work properly in a Mac?  If you aren't, then I'd recommend talking to Dave @ MacVidCards because he can cook you up an nVidia 700-series card that will boot properly in a Mac Pro, run at PCI-E 2.0 speeds, and work wonderfully in Pr/AME.

  • Compatible video cards for my Mac Pro

    Hi,
    I have the first generation MacPro. It came with the Nvidia GeForce 7300 GT and that just died on me.
    I called someone around here I can buy from, but it's going to cost me about $550.00 through him. He'd suggested I go third party but couldn't really elaborate on what that meant.
    I don't mind paying, I just want to check my options first and see if I can do better in terms of cost. Does anyone know of compatible cards I might be able to use for this machine?
    Thanks for any suggestions.
    -Vincent

    Hi Vincent,
    I've just upgraded my Mac Pro 2,1 to the ATI 4870.
    Couldn't be happier. Fast & Quiet, only problem is it runs hot. Great timing as it's fantastic for playing Steam games at unreal resolutions and levels of quality. I've upgraded from the 8800GT which will absolutely stump your 7300GT if you can get one.
    I've done a review on my blog (see link below). Also a few other upgrades on my Mac Pro such as SSD , Blu-ray and RAID all enhancing the machine to such an extent that it benchmarks faster than the new i7 iMacs according to CineBench.
    Anyway good luck with the upgrade.
    Alan
    http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/4/16The_ultimate_graphics_on_the_earlyMacPro.html

  • I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations? Thanks.

    I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations?
    Thanks.

    BlackList:
    Final Cut Pro X, Motion 5, Compressor 4: Graphics card compatibility
    WhiteList:
    Final Cut Pro X, Motion 5, Compressor 4: Using OpenCL-enabled graphics cards
    OpenCL graphics cards available now, for any Mac Pro model, for a reasonable cost:
    Apple 5770 US$250 Avail: in stock
    Apple 5870 US$450 Avail: 2-3 weeks

  • ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

    We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
    Many thanks,
    Philip

    The Nvidia 7800GS is a flashed card, runs a 30" with ease.
    BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
    He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
    There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
    There are also flashed 6600GT AGP cards which will work, but harder to find.
    Any of the above 3 will run circles around a 9600.

  • Mini Display Port connector for 2008 Mac Pro

    I have a 2008 Mac Pro (with 2 x DVI connectors).  Is there a graphics card with Mini Display Port connector that I can just wack in and use a 27" Apple LED Cinema Display?

    Which 27" display?  Current Thunderbolt model or previous mini-displayport model?
    For mini-displayport connections look at the apple versions of the ATI Radeon HD 5770 and 5780 video cards.  Both have two mini-displayports and a dual link dvi port.  The 5770 requires one aux poer adapter cable while the 5780 requires two.
    At present there is no way to connect the current 27" TB display to mini-displayport.  Only to another TB display or the 2011 computer's apple makes.

Maybe you are looking for

  • Log Exception Message in BPM Alert

    Hi all I have a problem I am trying to solve. I have searched through the forum to try find pointers to a solution but haven't found anything yet. I am trying to process an exception branch in such a way that when it throws an alert, it includes in t

  • WL 5.1sp9 and patches for JDK 1.3 and Solaris 2.8patches

    Are there any patches needed to run WL 5.1 sp 9 with solaris 2.8, JDK 1.3.0, and clarify 10.1. Any response to any topic would be appreciated.

  • Installing j2se on w2k sp4

    I have tried to download and install both a)J2SE / NetBeans 3.6 and b)1.4.2 (J2SE). The downloads ( a) j2sdk-1_4_2_04-nb-3_6-bin-windows.exe b) j2sdk-1_4_2_06-windows-i586-p.exe ) are fine. However, during the install wizard, I am asked where to inst

  • Serial Number? Running as trial

    It seems like a pretty common thing. Phone Support has already hung up me and I don't have time to hang out and wait again so I'm going to post for the time being. Bought the CC today. I previous had an old copy of CS6 on here running as a trial. I g

  • Update (....) already installed, skipping

    Hello, anyone have suggestions for this issue on a couple of hundred Windows 7 Professional SP1 clients? The one machine I'm looking at currently has no errors in the scan agent log or the Windows update log.  The WUAHandler log has the text in the s